Scribd
Upload
9 views3 pages

BPD465 Balanced Photodetector

Uploaded by

mehran nazari
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
9 views3 pages

BPD465 Balanced Photodetector

Uploaded by

mehran nazari
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

www.ybphotonics.

com

BPD465 Balanced Photodetector

1. Overview
The balanced photodetector contains two photodiodes and a low-noise transimpedance
amplifier, where the two photodiodes are matched to each other for excellent common
mode rejection ratio, and the detector subtracts the two detected signals to eliminate the
common mode noise, so that small variations of the effective signal can be obtained from
the interfering noise. The detector is available in two spectral ranges, 400-1000nm and
1000-1700nm.

2. Features
 Covers wavelength range 400-1700nm
 Compact housing
 Excellent common mode rejection ratio
 SMA output connector

3. Applications
 OCT
 DAS
 Outlier detection
 Optical delay measurement

4. Specifications
BPD465A- BPD465A- BPD465A- BPD465A-
Items
10M 75M 200M 400M
Materials Si
Wavelength 400-1000nm
Input
FC 法兰
connector
Responsivity 0.5A/W @780nm
Common mode
>25dB
rejection ratio
Bandwidtha DC-10MHz DC-75MHz DC-200MHz DC-400MHz
Rise time a
36ns 4.5ns 1.8ns 1ns
Gain b
1MV/A 165kV/A 30kV/A 10kV/A
Saturated 8uw 48uw 267uw 800uw
Optical power
Noise voltagea 9mV RMS 8mV RMS 4mV RMS 3.5mV RMS
NEP 4.7pW/√Hz 20.5pW/√Hz 56pW/√Hz 84pW/√Hz

1/3
www.ybphotonics.com

BPD465C- BPD465C- BPD465C- BPD465C-


Items
10M 75M 200M 400M
Materials InGaAs
Wavelength 1000-1700nm
Input
FC 法兰
connector
Responsivity 0.9A/W @1550nm
Common mode
>25dB
rejection ratio
Bandwidtha DC-10MHz DC-75MHz DC-200MHz DC-400MHz
Rise time a
36ns 4.5ns 1.8ns 1ns
Gain b
1MV/A 165kV/A 30kV/A 10kV/A
Saturated 4.4uw 27uw 148uw 445uw
Optical power
Noise voltagea 9mV RMS 8mV RMS 4mV RMS 3.5mV RMS
NEP 2.6pW/√Hz 11.4pW/√Hz 32pW/√Hz 48pW/√Hz

Paramas Detector Common Parameters


Maximum output amplitude a
±2.0V
Operating voltage ±12V
Operating Current <200mA
Output Impedance 50Ω
Output coupling mode DC
Output connector SMA female
Operating temperature -20~65℃
Storage temperature -40~85℃
Remarks:
a : For 50Ω loads
b : For high resistance loads

2/3
www.ybphotonics.com

5. Mechanical dimensions

6. Response curve

Note: Response curves are typical values for reference only.

3/3

You might also like