METALLIZED POLYPROPYLENE

TAPE WRAP AND EPOXY FILL CASE X323

PAGE 1 OF 4

250VDC
CAP T W L LEAD IPEAK
(µF) MAX MAX MAX AWG (A)
0.217" 0.394" 0.551"
0.10 22 1.0
(5.5mm) (10.0mm) (14.0mm)
0.236" 0.413" 0.748"
0.15 22 1.1
(6.0mm) (10.5mm) (19.0mm)
0.276" 0.413" 0.748"
0.22 22 1.5
(7.0mm) (10.5mm) (19.0mm)
0.315" 0.492" 0.748"
0.33 22 2.3
(8.0mm) (12.5mm) (19.0mm)
0.315" 0.531" 0.984"
0.47 20 1.9
(8.0mm) (13.5mm) (25.0mm)
0.374" 0.610" 0.984"
0.68 20 2.7
(9.5mm) (15.5mm) (25.0mm)
0.433" 0.689" 0.984"
1.0 20 4.0
(11.0mm) (17.5mm) (25.0mm)
0.433" 0.689" 1.260"
1.5 20 6.0
(11.0mm) (17.5mm) (32.0mm)
0.492" 0.787" 1.260"
2.2 20 8.8
(12.5mm) (20.0mm) (32.0mm)
0.512" 0.866" 1.457"
3.3 20 5.0
(13.0mm) (22.0mm) (37.0mm)
0.591" 0.984" 1.457"
4.7 20 7.1
(15.0mm) (25.0mm) (37.0mm)
0.650" 1.043" 1.850"
6.8 18 5.4
(16.5mm) (26.5mm) (47.0mm)

301 WEST O STREET • OGALLALA, NE 69153

Phone: (308) 284-3611 e-mail: [email protected]
Fax: (308) 284-8324 web: www.ascapacitor.com
 METALLIZED POLYPROPYLENE
TAPE WRAP AND EPOXY FILL CASE X323
PAGE 2 OF 4

400VDC
CAP T W L LEAD IPEAK
(µF) MAX MAX MAX AWG (A)
0.256" 0.453" 0.748"
0.10 22 1.0
(6.5mm) (11.5mm) (19.0mm)
0.315" 0.531" 0.748"
0.15 22 1.5
(8.0mm) (13.5mm) (19.0mm)
0.315" 0.551" 0.984"
0.22 20 1.4
(8.0mm) (14.0mm) (25.0mm)
0.374" 0.630" 0.984"
0.33 20 2.1
(9.5mm) (16.0mm) (25.0mm)
0.374" 0.630" 1.260"
0.47 20 3.1
(9.5mm) (16.0mm) (32.0mm)
0.433" 0.748" 1.260"
0.68 20 4.4
(11.0mm) (19.0mm) (32.0mm)
0.472" 0.827" 1.260"
1.0 20 6.5
(12.0mm) (21.0mm) (32.0mm)
0.512" 0.866" 1.457"
1.5 20 4.5
(13.0mm) (22.0mm) (37.0mm)
0.630" 0.984" 1.457"
2.2 20 6.6
(16.0mm) (25.0mm) (37.0mm)
0.630" 1.102" 1.850"
3.3 18 3.3
(16.0mm) (28.0mm) (47.0mm)
0.866" 1.339" 1.850"
4.7 18 4.7
(22.0mm) (34.0mm) (47.0mm)

301 WEST O STREET • OGALLALA, NE 69153

Phone: (308) 284-3611 e-mail: [email protected]
Fax: (308) 284-8324 web: www.ascapacitor.com
 METALLIZED POLYPROPYLENE
TAPE WRAP AND EPOXY FILL CASE X323
PAGE 3 OF 4

630VDC
CAP T W L LEAD IPEAK
(µF) MAX MAX MAX AWG (A)
0.315" 0.512" 0.984"
0.10 20 1.0
(8.0mm) (13.0mm) (25.0mm)
0.354" 0.591" 0.984"
0.15 20 1.5
(9.0mm) (15.0mm) (25.0mm)
0.354" 0.610" 1.260"
0.22 20 2.2
(9.0mm) (15.5mm) (32.0mm)
0.453" 0.768" 1.260"
0.33 20 3.3
(11.5mm) (19.5mm) (32.0mm)
0.551" 0.906" 1.260"
0.47 20 4.7
(14.0mm) (23.0mm) (32.0mm)
0.591" 0.945" 1.457"
0.68 20 2.7
(15.0mm) (24.0mm) (37.0mm)
0.630" 0.984" 1.850"
1.0 18 2.0
(16.0mm) (25.0mm) (47.0mm)
0.787" 1.142" 1.850"
1.5 18 3.0
(20.0mm) (29.0mm) (47.0mm)
0.945" 1.339" 1.850"
2.2 18 4.4
(24.0mm) (34.0mm) (47.0mm)

301 WEST O STREET • OGALLALA, NE 69153

Phone: (308) 284-3611 e-mail: [email protected]
Fax: (308) 284-8324 web: www.ascapacitor.com
 METALLIZED POLYPROPYLENE
TAPE WRAP AND EPOXY FILL CASE X323
PAGE 4 OF 4

GENERAL SPECIFICATIONS

PHYSICAL CHARACTERISTICS

CONSTRUCTION: NON-INDUCTIVE WOUND METALLIZED POLYPROPYLENE.

CASE: TAPE WRAP CASE AND EPOXY FILL.

LEAD MATERIAL: AXIAL SOLDER COATED OR TINNED SOLID WIRE, AWG AS SPECIFIED IN TABLES.

DIMENSIONS: AS SPECIFIED IN TABLES.

ELECTRICAL CHARACTERISTICS

CAPACITANCE: AS SPECIFIED IN TABLES ± REQUESTED TOLERANCE WHEN MEASURED AT OR

REFERRED TO 1000 ± 20 HZ AND 25 ± 5 °C.

TOLERANCE: ±5%, ±10%, AND ±20% AVAILABLE. OTHER TOLERANCES AVAILABLE UPON REQUEST.

DISSIPATION FACTOR: SHALL NOT BE GREATER THAN 0.1% WHEN MEASURED AT OR REFERRED TO
1000 ± 20 HZ AND 25 ± 5 °C.

INSULATION RESISTANCE: SHALL BE GREATER THAN 30,000 MΩ FOR CAPACITANCE VALUES 0.33 µF
AND LESS OR 10,000 MΩ X µF FOR CAPACITANCE VALUES GREATER THAN 0.33 µF WHEN MEASURED
AFTER 2 MINUTES ELECTRIFICATION AT 100VDC AND 25 ± 5 °C.

DIELECTRIC STRENGTH: 160% RATED VOLTAGE FOR 2 SECONDS THROUGH A LIMITING RESISTANCE
OF 100 OHMS/VOLT AT 25 ± 5 °C.

RATED VOLTAGE: 250VDC, 400VDC, AND 630VDC AVAILABLE.

TEMPERATURE: -40 °C TO +85 °C AT FULL RATED VOLTAGE OPERATIONAL TEMPERATURE, +105 °C

MAX STORAGE TEMPERATURE.

ADDITIONAL INFORMATION

ORDERING INFORMATION: ALL ASC CAPACITORS ARE ORDERED BY "FAMILY CAP-TOL-VOLT"

DESIGNATION. (I.E. TO ORDER AN X323 0.1µF, ±10%, 250VDC CAPACITOR, REQUEST PART NUMBER
"X323 .1-10-250")

SEE ALSO: "GENERAL INFORMATION - POLYPROPYLENE CAPACITORS" DOCUMENT FOR ADDITIONAL

PHYSICAL, ELECTRICAL, AND PERFORMANCE CHARACTERISTICS NOT MENTIONED IN THIS FILE.

WARNING: INFORMATION ON THIS FILE IS SUBJECT TO CHANGE WITHOUT NOTICE AT ASC'S

DISCRETION.

LAST MODIFIED: 09/05/01

301 WEST O STREET • OGALLALA, NE 69153

Phone: (308) 284-3611 e-mail: [email protected]
Fax: (308) 284-8324 web: www.ascapacitor.com