Scribd
Upload
11 views6 pages

OSPF

Uploaded by

hitham
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
11 views6 pages

OSPF

Uploaded by

hitham
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

CCNA Routing OSPF

PROTOCOL
LAP 1

NETWORK ENGINEER: DAHY MANSOUR


➢ LAP 1 Consists of:
• 3 Router
• 2 Switch 2 Layer
• 6 PCs
• 6 Laptop
• 2 Server
o LAN 1:
▪ 1 Switch 2 layer
▪ 3 Pcs and 3 Laptop
▪ Network Ip 1.1.1.0 /27
▪ Subnet mask 255.255.255.224
▪ Default IP 1.1.1.1 /27
o LAN 2:
▪ 1 Switch 2 layer
▪ 3 Pcs and 3 Laptop
▪ Network Ip 2.2.2.0 /27
▪ Subnet mask 255.255.255.224
▪ Default IP 2.2.2.1 /27
1.Implement OSPF protocol on router and Switch 3 layer
2. Use area 0 in router and switch 3 layer

NETWORK ENGINEER: DAHY MANSOUR

1
3.Ping from LAN 1 to LAN 2 and from LAN 2 to LAN 1
4. NETWORK TOPOLOGY:

➢R 0

Router(config-if)#int f0/0
Router(config-if)#ip address 10.0.0.2 255.255.255.252
Router(config-if)#no shutdown
Router(config-if)#int f0/1
Router(config-if)#ip address 20.0.0.2 255.255.255.252
Router(config-if)#no shutdown
Router(config)#
Router(config)#router OSPF 1
Router(config-router)#network 10.0.0.0 0.0.0.3 area 0
Router(config-router)#network 20.0.0.0 0.0.0.3 area 0
NETWORK ENGINEER: DAHY MANSOUR

2
➢Show run
interface FastEthernet0/0
Ip address 10.0.0.2 255.255.255.252
duplex auto
speed auto
!
interface FastEthernet0/1
Ip address 20.0.0.2 255.255.255.252
duplex auto
speed auto
!
router OSPF 1
log-adjacency-changes
network 10.0.0.0 0.0.0.3 area 0
network 20.0.0.0 0.0.0.3 area 0

➢R 1
Router(config)#int f0/0
Router(config-if)#ip address 10.0.0.1 255.255.255.252
Router(config-if)#no shutdown
Router(config-if)#int f0/1
Router(config-if)#ip address 1.1.1.1 255.255.255.224
Router(config-if)#no shutdown
Router(config)#router OSPF 1
Router(config-router)#network 10.0.0.0 0.0.0.3 area 0
Router(config-router)#network 1.1.1.0 0.0.0.31 area 0

NETWORK ENGINEER: DAHY MANSOUR

3
➢Show run
interface FastEthernet0/0
Ip address 10.0.0.1 255.255.255.252
duplex auto
speed auto
!
interface FastEthernet0/1
Ip address 1.1.1.1 255.255.255.224
duplex auto
speed auto
!
router OSPF 1
log-adjacency-changes
network 10.0.0.0 0.0.0.3 area 0
network 1.1.1.0 0.0.0.31 area 0

➢R 2
Router(config)#int f0/0
Router(config-if)#ip address 20.0.0.1 255.255.255.252
Router(config-if)#no shutdown
Router(config-if)#int f0/1
Router(config-if)#ip address 2.2.2.1 255.255.255.224
Router(config-if)#no shutdown
Router(config)#router OSPF 1
Router(config-router)#network 20.0.0.0 0.0.0.3 area 0
Router(config-router)#network 2.2.2.0 0.0.0.31 area 0

NETWORK ENGINEER: DAHY MANSOUR

4
➢Show run
interface FastEthernet0/0
Ip address 20.0.0.1 255.255.255.252
duplex auto
speed auto
!
interface FastEthernet0/1
Ip address 2.2.2.1 255.255.255.224
duplex auto
speed auto
!
router OSPF 1
log-adjacency-changes
network 20.0.0.0 0.0.0.3 area 0
network 2.2.2.0 0.0.0.31 area 0
➢ Ping from SERVER in LAN 1 to SERVER in LAN 2:

➢Ping from SERVER in LAN 2 to PC 2 in LAN 1:

THANK YOU
NETWORK ENGINEER: DAHY MANSOUR

You might also like