COMPONENT CONNECTOR END VIEWS...

K20 ENGINE CONTROL MODULE X2 Document ID# 2877116

K20 Engine Control Module X2

Connector Part Information

Harness Type: Engine

OEM Connector: PPI0001018
Service Connector: 13395416
Description: 73-Way F 0.64, 2.8 Series, Sealed (BK)

Terminal Part Information

Diagnostic Terminal
Terminal Terminated Service Core Insulation
Test Removal Tray
Type ID Lead Terminal Crimp Crimp
Probe Tool

I Pending Pending Pending Pending Pending Pending Pending

J-38125- J-35616-
II Pending 54001404 24 2 4
12A 35 (VT)

K20 Engine Control Module X2

Terminal
Pin Size Color Circuit Function Option
Type ID

1 0.5 BU/WH 225 Generator Turn On Signal I -

2 - - - Not Used - -

Heated Oxygen Sensor High Signal

3 0.5 BN/VT 1666 I -
Bank 2 Sensor (1)

Heated Oxygen Sensor High Signal

4 0.5 BN 1668 I -
Bank 1 Sensor (2)

5 0.5 BN/GN 485 Throttle Position Sensor Signal (1) I -

6-7 - - - Not Used - -

Manifold Absolute Pressure Sensor

8 0.5 GN/WH 432 I -
Signal
 Terminal
Pin Size Color Circuit Function Option
Type ID

9 0.5 BN/BU 486 Throttle Position Sensor Signal (2) I -

Heated Oxygen Sensor Low Signal Bank

10 0.5 WH 1667 I -
2 Sensor (1)

11 0.5 YE 6263 Camshaft CAM Y Signal I -

12 0.75 BN/VT 1746 Fuel Injector Control (3) I -

13 0.5 BK/BU 6755 Cam Phaser Y Return Low Reference I -

Heated Oxygen Sensor High Signal

14 0.5 BU 1670 I -
Bank 2 Sensor (2)

15 0.5 BK/BU 6783 Cam Phaser W Return Low Reference I -

16 0.75 BN/YE 844 Fuel Injector Control (4) I -

17 - - - Not Used - -

18 0.5 VT/BU 6270 Crankshaft 60X Sensor Voltage I -

19 - - - Not Used - -

Heated Oxygen Sensor Low Signal Bank

20 0.5 YE/WH 1669 I -
1 Sensor (2)

21 0.5 GY 23 Generator Field Duty Cycle Signal I -

22-23 - - - Not Used - -

24 0.5 YE/BU 231 Oil Pressure Switch Signal I -

Engine Coolant Temperature Sensor

25 0.5 BU 410 I -
Signal

26 0.5 GN 6271 Crankshaft 60X Sensor Signal I -

27 0.5 YE/VT 6265 Camshaft CAM W Signal I -

28-31 - - - Not Used - -

32 0.5 GN/BU 436 Camshaft Phaser Intake Solenoid (1) I -

33 0.5 WH/BU 6260 Camshaft CAM Y Supply Voltage I -

34 - - - Not Used - -

35 0.5 VT/GY 496 Knock Sensor Signal (1) I -

Manifold Absolute Pressure Sensor 5

36 0.5 GY/RD 2704 I -
Volt Reference

37-38 - - - Not Used - -

39 0.5 BK/VT 6268 Camshaft CAM Y Ground I -

40 0.5 GN/BK 6266 Camshaft CAM W Ground I -

41-44 - - - Not Used - -

 Terminal
Pin Size Color Circuit Function Option
Type ID

45 0.5 BK/VT 6272 Crankshaft 60X Sensor Low Reference I -

46 0.75 GN/BU 2123 Ignition Control (3) I -

47 0.75 YE/BU 2124 Ignition Control (4) I -

48 - - - Not Used - -

49 0.75 BK/BU 2129 Ignition Control Low Reference Bank 1 I -

50 0.75 BN/VT 1744 Fuel Injector Control (1) I -

51 0.75 YE/WH 1745 Fuel Injector Control (2) I -

Heated Oxygen Sensor Heater High

52 0.75 BN/GY 5037 I -
Control Bank 2 Sensor (2)

53 - - - Not Used - -

54 0.5 GY/BU 6259 Camshaft CAM W Supply Voltage I -

55 0.5 BK/YE 1716 Knock Sensor Low Reference (1) I -

Throttle Position Sensor 5 Volt

56 0.5 BN/RD 2701 I -
Reference

57-59 - - - Not Used - -

60 0.5 BK/BN 2752 Throttle Position Sensor Low Reference I -

61 - - - Not Used - -

Manifold Absolute Pressure Sensor Low

62 0.5 BK/GN 469 I -
Reference

63 - - - Not Used - -

Coolant Temperature Sensor Low

64 0.5 BK/BU 2761 I -
Reference

65 - - - Not Used - -

66 0.75 GN/BU 428 EVAP Canister Purge Solenoid Control I -

67 - - - Not Used - -

68 0.75 BN/WH 582 Throttle Actuator Control Close I -

69 0.75 YE 581 Throttle Actuator Control Open I -

70 0.75 BU/VT 2121 Ignition Control (1) I -

71 0.75 BU/WH 2122 Ignition Control (2) I -

Heated Oxygen Sensor Heater High

72 0.75 GN 676 I -
Control Bank 1 Sensor (1)

73 2.5 BK 350 Ground II -

© 2014 General Motors. All rights reserved.

Portions of materials contained herein are sourced from General Motors Inc., Co.

Copyright 2007 - 2014 Service Repair Solutions, Inc.