Scribd
Upload
30 views2 pages

Marine Suppression System: Pneumatic Actuator

Uploaded by

mohamed.tahoun
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
30 views2 pages

Marine Suppression System: Pneumatic Actuator

Uploaded by

mohamed.tahoun
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

PNEUMATIC CATALOG

NUMBER
ACTUATOR 1172

P/N C70-233
Marine Suppression System N70-233
Architect and Engineering Specification
UL - Ex 4447
FM 3002238
USCG - 162.161/2/0 (HFC-227ea)
USCG - 162.038/12/0 (CO2)

Pneumatic Actuator Remote Pneumatic Actuator


Part No C70-233 Part No. N70-233
DESCRIPTION

Pneumatic Actuators, P/N C70-233 and N70-233, allow in the cylinder. The valves are also equipped with a safety
manual actuation of a Fike HFC-227ea or CO2 System for relief disc that will rupture if the cylinder pressure exceeds
industrial or marine applications. Actuator C70-233 is a single- 3,000 psi (20,685 kPa).
step actuator and N70-233 is a two step actuator that is
housed in a weather proof enclosure. These actuators can Both manual actuators include a sturdy mounting bracket
be mounted up to 300 linear feet away from the cylinder to affix the actuator to wall or other structure. Two u-bolts
valves. The actuator connects to the cylinder valve(s) via are used to connect the pressure vessel to the bracket.
1/4" O.D. stainless steel tubing (.035" wall thickness) or The overall dimensions of the actuator P/N C70-233, in-
1/4" galvanized schedule 40 or 80 pipe. For Marine HFC- cluding the bracket, are 5 1/2"w x 24"h x 3"d. The overall
227ea systems actuator N70-233 must be used to fulfill the dimensions of the two-step actuator N70-233, are 24"w x 30
requirements of the United States Coast Guard and NFPA 1/2"h x 8"d.
2001.

The pneumatic actuator valve is machined brass with a stain-


less steel lever mechanism. The pneumatic actuator valve
includes a pressure gauge to monitor the nitrogen pressure

September, 2001
Revised Issue

704 S. 10th St l PO Box 610 l Blue Springs, MO 64013-0610 U.S.A. l (816) 229-3405 l Fax (816) 229-0314 l E-mail: [email protected]
OPERATION

The Pneumatic Actuator P/N N70-233 is operated by opening the enclosure door, removing the safety pin, pulling the
lever and turning the accompanying ball valve. The actuator tubing connects directly to the appropriate control valve in a
HFC-227ea or CO2 system.

SPECIFICATIONS

Part Number: C70-233 Single-Step Pneumatic Actuator


N70-233 Twp-Step Pneumatic Actuator in an enclosure
Materials: Valve – Brass
Lever – Stainless steel
Cylinder – Spun steel
Painted Steel
Temp. Range: 0 to 130°F

3 1/2" MAX
(89 mm)

2"
(51 mm)

20 1/4"
30 1/2 27 3/4 1/8"(4 mm) Fem
NPT Outlet (510 mm)
(775 mm) (705 mm)

17"
432 mm) 6"
NITROGEN (N2) PNEUMATIC
ACTUATOR CYLINDERASSEMBLY
(152 mm)
WARNING RECHARGE

FIRST AID MAINTENANCE

INSTALLATION

FM

9/32" DIA
(7 mm)
1/4"(6 mm) TYP. 4 PLCS.
Diameter

5 1/2" 4 1/4"
1.00(25 mm) (140 mm) (108 mm)

5 1/2 13.00
(140 mm) (330 mm)
24
(610 mm)

FORM NO. D1172 Copyright  2001 by Fike Corporation All rights reserved PRINTED IN U.S.A.

You might also like