DR1
DR1
What are the different methods employed for starting of 3 phase induction motor?
Explain
Explain how the regenerative braking of a 3 phase induction is done. What are the
advantages?
Derive the expression for energy losses during the plugging operation..
Derive an equivalent circuit and torque expression for a delta connected induction
motor when one supply phase is disconnected.
Derive the expression for energy losses during the plugging operation..
Explain the dc dynamic braking of a 3 phase induction motor.
Explain the ac dynamic braking of a 3 phase induction motor.
Explain the plugging of a 3 phase induction motor.
Explain how the regenerative braking of a 3 phase induction is done. What are the
advantages?
What are the different methods employed for starting of 3 phase induction motor?
Explain
5 Marks
What is the multiquadrant operation of a motor driving a hoist load? Explain with
proper diagram.
State and explain the components of load torque.
Derive the expression for the motor torque for rotational motion load.
Classify load torques on the basis of torque speed characteristics.
Explain the steady state stability for the motor load system.
Write a brief note on the sources employed in electric drive.
Derive the torque equation for a 3 phase induction motor.
Derive the torque equation for a 3 phase induction motor operating under unbalanced
conditions.
Explain the operation of a high slip induction motor.
Explain the operation of a Deep bar squirrel cage rotor induction motor.
What are the draqbacks associated with the operation of induction motor with
unbalanced rotor impedances?
State and explain the soft start methods employed for induction motors.
Explain that the rotor resistance starter allows fast start with less heating of
induction motor.
When operating in regenerative braking, the induction motor slip should not be
allowed to exceed the breakdown slip. why?
When plugging is employed for stopping an induction motor, why is it necessary to
disconnect it from supply when speed reaches close to zero?
Explain the variable frequency control of an induction motor,
Explain the slip speed control of an induction motor.
Why stator voltage control is an inefficient method of induction motor speed
control?
Explain the operation of a VSI fed induction motor drive.
Explain the braking of a VSI fed induction motor drive.
Explain the operation of a CSI fed induction motor drive.
In variable frequency control of induction motor, for speeds below base speed (v/f)
ratio is maintained constant. why?
In variable frequency control of induction motor, for speeds above base speed
terminal voltage is maintained constant. why?
2 marks
What are the advantages of electrical drives?
State the essential parts of electrical drives.
What are the functions of a power modulator?
What are the motors employed for variable speed drive?
State the functions of various converters.
What are the main factors which decide the choice of electrical drive for a given
application?
What do you understand by constant torque drive?
What do you understand by constant power drive?
What is the closed loop control of a drive?
Why current sensing is required in electrical drives?
What are the advantages of squirrel cage induction motor over dc motor?
What is single-phasing of 3 phase induction motor?
What are the different types of braking schemes employed in 3 phase induction
motors?
Draw the load torque speed curve for a traction load.
Draw the load torque speed curve for constant power loads.
n the rotor voltage injection method, when an external voltage source is in phase
with the main voltage then speed will ___________
Which starting method is the best method in Induction motor?
What is an electric drive?
A 3 phase induction motor under dc dynamic braking work as _________
Why is it advisable to avoid line starting of induction motor and use starter?
DOL starting of induction motors is usually restricted to ________HP motors.
What is crawling of 3 phase induction motors?
For driving high inertia loads best type of induction motor suggested is _____
A 3-phase 440 V, 50 Hz induction motor has 4% slip. The frequency of rotor e.m.f.
will be ______
A 3-phase induction motor delta connected is carrying too heavy load and one of its
fuses blows out. Then the motor will __________
The starting torque of a 3 phase squirrel cage induction motor is _____ of full
load torque.
The starting torque of the slip ring induction motor can be increased by adding
________
A double squirrel-cage induction motor has _______
A pump induction motor is switched on to a supply 30% lower than its rated voltage.
The pump runs. What will eventually happen? It will ______
In which application, slip ring motor is preferred over squirrel cage induction
motor?
In squirrel cage induction motors, the rotor slots are usually given slight skew in
order to ______
For which motor the speed can be controlled from rotor side?
What are the limitations of frequency converters used for controlling induction
motor?
What are the different types of frequency converters used for controlling induction
motor?
What are the two disadvantages of CSI control of induction motor.
What are the advantages of PWM inverter over a square wave inverter?
When is an autotransformer starter a better choice than star-delta starter?
When are the DOL starter not suitable?
What are the advantages of operating an induction motor as a variable speed motor?