Scribd
Upload
11 views

How to disable IP autoconfiguration

Uploaded by

adnanvista
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
11 views

How to disable IP autoconfiguration

Uploaded by

adnanvista
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Home > Networking > DHCP & IPAM > How-tos

How to disable IP autoconfiguration in Core server

JC336
Dec 20, 2013 2 Minute Read
Spice (5)
Reply (11)
Subscribe
Share
If you add a static IP in a core server, you may see that the auto configuration is on and giving a 169.0.0.0
number as the preferred address and the new static IP as the duplicate address. This will not work. When
using a Core server, use the following steps to fix the issue.

4 Steps total
Step 1: Run > cmd > ipconfig /all

Expand
Looks to see which IP is the preferred and if autoconfiguration is on.

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Intel(R) 82567LM-3 Gigabit Network Connection


Physical Address. . . . . . . . . : 00-23-24-08-30-57 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . .
: Yes Link-local IPv6 Address . . . . . : fe80::8508:6cb9:5112:f8c9 (Preferred) Autoconfiguration IPv4 Address. . :
169.254.248.201(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.0.0 IPv4 Address. . . . . . . . . . . :
192.168.1.136(Duplicate) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 192.168.1.1 NetBIOS over Tcpip. . . . . . . . : Enabled

Step 2: netsh interface ipv4 show inter


After running this command. Look for your index number:

result as:

Idx Met MTU State Name

1 50 4294967295 connected Loopback Pseudo-Interface 1 11 10 1500 connected Local Area Connection

11: <=Keep it in mind

Step 3: netsh interface ipv4 set interface 11


dadtransmits=0 store=persistent
run this command to fix the correct index (interface). Replace 11 with your index number.

Step 4: services.msc
Disable the DHCP Client service. If you ever go back to DHCP from static, remember to set this back to
automatic.

Restart your computer.

You might also like