1stInternational Conference on Materials Science and Technology (MatScience-2022)

13-15 December 2022, Khenchela, Algeria

Conference Program
7:00 - 17.30 h Registration - Conference Desk
December 13th, 2022
09:00–10:00 Opening Ceremony
Plenary Session I (Conference Hall, Room1)
Session Chairs: Pr. Derfouf Semsheddine, Pr. Benoudia Mohamed Cherif, Pr. Djebaili Abdelhamid, Pr. Boumaza Abdecharif,
Dr. Salim Brahimi,
Plenary Key Speaker, Prof. Grigorian SOUREN, Germany
10:00 – 10:30 Advanced materials characterization for flexible electronics

Plenary Key Speaker, Prof. Olivier THOMAS, France

10:30 – 11:00
Probing mechanical behavior at the nanoscale using in situ mechanical testing on synchrotron beamlines

Plenary Key Speaker, Dr. Corinne NOUVEAU, France

11:00 – 11:30
CrN-based PVD multilayers for mechanical applications
11:30 – 11:45 Coffee Break
Plenary Key Speaker, Prof. Pavol HVIZDOŠ, Slovakia
11:45 – 12:15
Novel ultra-high temperature ceramics based on high entropy carbides

Plenary Key Speaker Prof. Akram ALHUSSEIN, France

12:15 – 12:45
Advanced approaches for improving mechanical, electrochemical and biomedical properties of coatings

12:45 – 13:15 Plenary Key Speaker Prof. Luis Perez MAQUEDA, Spain
Reaction Flash Sintering of Electroceramics: A New Paradigm
13:00 – 14:30 Lunch
14:30 – 16:00 Oral session I
Poster session I: Ids:
0111; 0239; 0284; 0746; 0827; 0936; 1205; 1245; 1852; 2120; 0155; 0378; 0710; 1299; 1330; 1983 ; 2170; 2932; 7661;
10:00 – 13:00 8132; 8002; 3231; 0173; 0182; 0196; 0241; 0385; 0391; 0492; 0553; 0586; 0686; 0737; 0810; 0841; 0887; 0966 ; 1283;
2759; 2846 ; 8587; 8100; 8587; 0763; 0967; 1131 ; 1917; 1956; 2132; 2320; 2441; 2516; 2595; 2884; 3101; 3247; 3270;
3313; 8424

Room1/Topic: Materials, Properties and Characterization, Materials Engineering, Chemistry - Quantum Chemistry
Session Chairs: Dr. Bouakkadia Amel, Dr. Benhadda Nabil, Dr. Othmani Romdhane

“Effect of Intermolecular Interactions on the Sensitivity of Some Energetic Compounds Using DFT
14:30 – 14:40 ID: 0475
Calculations”, Nassima BACHIR
“Improved Properties of Rigid PVC Composites Using Talc/Calcined Kaolin Co-filler System”,
14:40 – 14:50 ID: 0536
Oum Keltoum MALLEM
“The surface modification influence on structural and electrochemical properties of WC-6%Co”,
14:50 – 15:00 ID: 0835
Khokha LALAOUI
“Non-destructive and structural techniques for preservation of the materiality and authenticity of an historical
15:10 – 15:20 ID: 0955
fortified: the case of Palmanova city fortress, Italy”, Cristian TEDESCHI
“Green solid-state mechanochemical synthesis of sliver nanoparticles: and their antimicrobial activities: A
15:20 – 15:30 ID: 0981
Review”, Mohammad ALRBAIHAT
“Detection of cyanide ion in organic-aqueous media by a new chemosensor derived from hydrazones”, Nour
15:30 – 15:40 ID: 2070
El-Houda AOUIMEUR
“Structure, Hirshfeld surface and charge density analysis of PABA perchlorate monohydrate obtained using a
15:40 – 15:50 ID: 6783
multipolar, multipolar transferred and theoretical models”, Dadda Noureddine
“QSRR modeling of Blackberries compounds using Genetic Algorithm variable selection coupled with
15:50 – 16:00 ID: 8657
multiple linear regression”, Imen TOUHAMI
Room2/ Topic: Materials; Composite Materials; Biomaterials; Theoretical & Computational Approach for Nanoscience;
Applied Ceramic Technology Engineering, Chemistry - Quantum Chemistry
Session Chairs: Pr. Hamma Zdira, Dr. Benzetta Karim, Dr. Abdelghani Kenzour
“Behavior study of composite honeycomb sandwich structures under buckling stress after cyclic impact”,
14:30 – 14:40 ID: 0382
Ahcene OUBOUZID
“A study on new generation ones β and near β-type Ti-Nb-Zr alloys for bone implant application”,
14:40 – 14:50 ID: 0346
Marwa DAHMANI

1
 1stInternational Conference on Materials Science and Technology (MatScience-2022)
13-15 December 2022, Khenchela, Algeria
“Behaviour prediction of Pineapple leaf fiber/epoxy multilayered pipes under internal pressure”,
14:50 – 15:00 ID: 0464
Ghania HABBAR
“Mechanical behaviour damage of a woven eco-composite reinforced by vegetable jute fibers”,
15:10 – 15:20 ID: 0491
Abderrahim BENMOUSSAT
“Numerical simulation of mechanical behaviour of laminated carbon fiber reinforced composite under low
15:20 – 15:30 ID: 1104
velocity impact”, Yazid FIZI
“Elaboration and characterization of cordierite glass ceramic starting from recycled glass waste”,
15:30 – 15:40 ID: 4543
Nejet BENMORKAT
15:40 – 15:50 ID: 9813 “Dynamics of Bolted Beams in The Presence of Friction”, Fatine CHEKIROU

15:50 – 16:00 ID: 2740 “Elaboration and characterization of Indium doped ZnO thin films”, Malika MEDJALDI
Room3/ Topic: Energy Materials, Materials and Environment, Renewable Energies
Session Chairs: Dr. Beddiaf Yacine, Dr. Mellal Saida, Dr. Chergui Laid
14:30 – 14:40 ID: 0555 “Effect of treatment by infiltration-percolation of olive mill wastewater”, Zakia GUEBOUDJI
“Beneficial role of ZnOphotocatalyst supported with porous activated carbon prepared from an agro-
14:40 – 14:50 ID: 0896 industrial waste (olive oil waste) for the mineralization of industrial dye in aqueous solution”,
Ala ABDESSEMED
14:50 – 15:00 ID: 1191 “Proton conductivity of polyantimonic acid-based membranes”, Artem ZARIPOV
“The effect of temperature on CZTS thin film solar cells designs: A comparative study”,
15:10 – 15:20 ID: 1356
Abdelhalim BENZETTA
15:20 – 15:30 ID: 1966 “Carbon levels in two agricultural systems, organic and conventional farming”, Rania LALLAOUNA
“Synthesis of magnetite nanoparticles CTAB for the removal of Cr (VI) from aqueous solution”,
15:30 – 15:40 ID: 2585
Mohamed NAOUS
“Effects of tempering treatment after carbonitriding on hardness, friction, and on wear behavior of 25CrMo4
15:40 – 15:50 ID: 4603
steel surfaces”, Abdelkarim GHANEM
“Experimental Investigation of Tool Lifespan Evolution during Turning Operation of AISI D3 Steel Based on
15:50 – 16:00 ID: 4671
Modified Overall Level (OLmod)”, Mohamed Khemissi BABOURI
16:00 – 16:15 Coffee Break
16:15 – 17:30 Oral session II
Room1/ Topic: Materials, Properties and Characterization, Materials Engineering, Chemistry - Quantum Chemistry
Session Chairs: Dr. Benali Cherif Rim, Dr. Fahem Sakher
“Synthesis, Magnetic and Crystallographic Study of [Fe(3-bpp) (NCS)2]4,4’-bipy pentacoordinate complex”,
16:15 – 16:25 ID: 2193
Dalila FEDAOUI
“The influence of heat treatment on mechanical properties of the thermally sprayed Ni-based coating on tool
16:25 – 16:35 ID: 2198
steel”, Sarra ALIOUI
“Evaluation of mechanical properties of Triply Periodic Minimal Surface Structures using ZEBULON
16:35 – 16:45 ID: 2274
software”, Sarra NACER
16:45 – 16:55 ID: 2326 “Improvement of the mechanical properties by gas nitriding of a from milling cutter”, Brahim CHERMIME
“Multilayered TiO2 and Ni-Doped TiO2 nanostructured coatings for the improvement of stainless Steel 304
16:55 – 17:05 ID: 2486
corrosion behavior”, Said BOUKERCHE
“Multi pass scratch test behavior of modified layer during gaseous nitriding in D2 and H13 tool steels”,
17:05 – 17:15 ID: 3398
Ouardani HAMDI
“Study and biological activity of new complexes of Cu (II) and Zn (II) with heterocyclic ligands derived from
17:15 – 17:25 ID: 3557
Imidazole[1,2-b] pyridazines”, Sabah CHIKHI
17:25 – 17:30 ID: 4085 “Study of aging time on structural and optical properties of ZnO thin films”, Malika MEDJALDI
Room2/Topic: Nanomaterials and Nanotechnology, Functional Materials, Composite Materials, Biomaterials, Theoretical&
Computational Approach for Nanoscience, Applied Ceramic Technology
Session Chairs: Dr. Ghelani Laala, Dr. Mohamed Hamidouche, Dr. Benaddi Hachemi,
16:15 – 16:25 ID: 2668 “Combined electrochemical and characterization of pollen from east of Algeria as an eco-friendly corrosion
inhibition of mild steel in acidic medium”, Amel SEDIK
16:25 – 16:35 ID: 1545 “Mechanical properties determination via image correlation and tensile test of polymer composite ABS-15%-
PMMA”, Abdelwahab KHLEDJ
16:35 – 16:45 ID: 2279 “Molarity dependence of the solution on the structural and hydrophobic properties of ZnO nanostructures”,
Zehira BELAMRI
16:45 – 16:55 ID: 2431 “Renewable resource based biocomposites from vegetal fiber and polyhydroxybutyrate-co-valerate (PHBV)
bioplastic”, Brahim REMILA
16:55 – 17:05 ID: 5618 “Hydroxyapatite/Starch Bio-composite and its Efficiency in Methylene Blue Dye Removal from Aqueous

2
 1stInternational Conference on Materials Science and Technology (MatScience-2022)
13-15 December 2022, Khenchela, Algeria
Solution”, Hanane MAHROUG
17:05 – 17:15 ID: 3918 “Effect of size and nature of fills in degree of conversion of dental resin composites”, Samir ZERGAT
17:15 – 17:25 ID: 5190 “Evaluation of the effectiveness of the protection layers of a gasoline storage tank”, Sidali BACHA
17:25 – 17:35 ID: 5228 “ZnO as an efficient transparent counter electrode for electrochromic devices”, HarithaAjitha HARIDASAN
Room3/ Topic: Energy Materials, Materials and Environment, Renewable Energies
Session Chairs : Prof. Chaiba Azezddine; Dr. Daoud Abderezak; Dr. Rebai Bilel
16:15 – 16:25 “Oil mill wastewater treatment in the Mediterranean region”, Habiba DALI
“Catalytic improved of the CO2 hydrogenation reaction using Mg, Al and Si support oxides on Cu/ZnO
16:25 – 16:35 ID: 2761
based catalysts at atmospheric pressure”, Djaouida ALLAM
“Plectranthusamboinicus leaf extract as a green corrosion inhibitor for 304L stainless steel in 1M HCl
16:35 – 16:45 ID: 2870
solution”, Sameh ATHMANI
“Efficient removal of industrial pollutant by facile prepared ferric titanium siliceous diatomite from aqueous
16:45 – 16:55 ID: 3063
solution”, Walid REZIG
“Synthesis, Characterization of Iron-Substituted Dawson-type Phosphotungstomolybdic Acid and Catalytic
16:55 – 17:05 ID: 3715 Activity of the S2O82-/H3FeP2W17MoO62 System in Direct Red 89 Degradation, Nadji NAWEL
“Contribution to the valorization of electronic waste in the manufacture of dune sand mortar”
17:05 – 17:15 ID: 6031
Toufik CHOUNGARA
“Synergistic inhibition effect of InulaViscosa extract with KI on steel corrosion in HCl solution:
17:15 – 17:25 ID: 7270
Electrochemistry and surface analysis”, Amel KOUACHE
17:25 – 17:35 ID: 7348 “Facile One Pot Synthesis of Reduced Graphene Oxide”, Asma TADJI
Poster Session II
2476 ; 2819 ; 2917 ; 2926 ; 3107 ; 3670 ; 4195 ; 4429 ; 4475 ; 4554 ; 4652 ; 4692 ; 4923 ; 3382 ; 3486 ; 3785 ; 4022 ;
14:30–17:30 4162 ; 4191 ; 4428 ; 4585 ; 4758 ; 5284 ; 5368 ; 5390 ; 5623 ; 1409 ; 1438 ; 1584 ; 1723 ; 2032 ; 2066 ; 2251 ; 2317 ;
2341 ; 2354 ; 2448 ; 2483 ; 2522 ; 3060 ; 3096 ; 5567 ; 5384 ; 5552 ; 7484 ; 8641 ; 9705 ; 9881 ; 3326 ; 3330 ; 3357 ;
3666 ; 3773 ; 4192 ; 4201 ; 4241; 8721 ; 4622 ; 4769 ; 4406 ; 9952 ; 4851 ; 9777 ; 7263 ; 9176 ; 9860 .

December14th, 2022
Plenary Session II (Conference Hall, Room1)
Session Chairs: Prof. Pavol Hvizdoš; Prof. Derfouf Shems Eddine; Prof. Siad Chahinez; Prof. Benfdila Arezki; Dr. Rezzak Daoud
Plenary Key Speaker Prof. Nicola D'AMELIO, France
09:00 –09:30
Antimicrobial natural peptides as promising molecules to face challenges of our times

Plenary Key Speaker Prof. Nouar TABET, United Arab Emirates

09:30 –10:00
Resolved Photoluminescence Investigation of the Charge Dynamics in Perovskite Solar Cells

Plenary Key Speaker, Dr. Antonia RESSLER, Croatia

10:00 –10:30
Role of the ions in bone regeneration: Biomimetic approach

10:30 – 10:45 Coffee Break

Plenary Key Speaker Prof. Hendra HERMAWAN, Canada
11:00 – 11:30
Passivation of TiHfZrNbx High-Entropy Alloys in Hanks’ Solution
Plenary Key Speaker Prof. Mohammed ABDUL SAMAD, Saudi Arabia
11:25 – 11:40 Ultra-High Molecular Weight Polyethylene Composite Coatings Reinforced
with Micron Sized Waste Tire Rubber for Tribological Applications

Plenary Key Speaker Prof. Rezzak DAOUD, Algeria

11:40 – 12:00
Robust energy management strategy of fuel cells-super capacitors hybrid power system

12:10 – 13:00 Oral session III

Poster session III
5451 ; 5505 ; 5991 ; 6030 ; 6399 ; 6426 ; 6670 ; 7613 ; 7919 ; 7950 ; 7996; 6502 ; 6527 ; 6535 ; 7046 ; 7448 ; 7481 ;
09:30 – 12:30 7693 ; 7858 ; 7975 ; 8116 ; 8833 ; 6038 ; 0616 ; 3830 ; 3950 ; 3953 ; 4080 ; 3954 ; 4362 ; 4378 ; 4396 ; 4461 ; 4473 ;
4497 ; 4725 ; 5029 ; 5154 ; 5222 ; 5303 ; 5459 ; 5619 ; 5677 ; 5708 ; 5779 ; 5784 ; 5836 ; 5842; 5924 ; 6568 ; 6584 ;
0762 ; 0704 ; 0718 ; 3266 ; 5080.
Room1/ Topic: Energy Materials, Materials and Environment,
Renewable Energies, Chemistry - Quantum Chemistry
Session Chairs: Dr.Guizani Hichem, Dr. Tabet Mohamed , Dr. Saoudi Adel
“Fluid flow and performances in a Variable Geometry Turbine (VGT) of Diesel Engine Turbocharger Using
12:10 –12:20 ID: 7362
CFD”, Abdelmadjid CHEHHAT
12:20– 12:30 ID: 7652 “Parametric Study of Natural Convection in Porous Cavity with Partial Heating and Cooling Conditions”,

3
 1stInternational Conference on Materials Science and Technology (MatScience-2022)
13-15 December 2022, Khenchela, Algeria
Liamena HASSINET
12:30 –12:40 ID: 8660 “Fabrication of perovskite mini-module by a bloadcoatting method”, Wahiba TLILI
12:40 –12:50 ID: 8982 “Investigation of defects in silicon neutron irradiation”, Nadjet OSMANI
12:50 –13:00 ID: 9896 “Fuzzy Sliding Mode Control of a Double Fed Induction Wind Turbine Generator”, Zahira BOUGUERRA
Room2/ Topic: Nanomaterials and Nanotechnology, Functional Materials, Composite Materials, Biomaterials, Theoretical
& Computational Approach for Nanoscience, Applied Ceramic Technology
Session Chairs: Dr. Chermim Brahim Dr. Rafrafi Salah, Dr. Benmorkat Nejet, Dr. Salim Brahimi,
“The temperature and normal load effect on microscratch behavior of talc filled polypropylene composites”
12:10 –12:20 ID: 2956
Mohamed TELDJOUN
“Photomagnetic studies of non-centrosymetric [Fe(bpp)2] [M(NCX)4] (X = S, Se) spin-crossover materials”
12:20– 12:30 ID: 3066
Abdelhak DJEMEL
12:30 – 12:40 ID: 3755 “Green synthesis of ZnO nanoparticles for pharmaceutical applications”, Abdelhak MAGHCHICHE
12:40 –12:50 ID: 3842 “The effect of variable elastic foundation on the mechanical response of FGM structures”, Nabil HIMEUR,
“Ab initio Prediction of Novel Nano-Biomaterials for Enhanced Efficacy of Total Hip Arthroplasty”
12:50 –13:00 ID: 2527
Mabrouk Nour Eliakine RAHAB
Room3/ Topic: Energy Materials, Materials and Environment, Renewable Energies
Session Chairs: Dr. Leila Chaabne Dr. Chahat Abdelmadjid, Dr. Abboudi Abdelaziz
“Effect of doping by different elements in copper oxide thin films on structural and optical properties”,
12:10 –12:20 ID: 9105
Madiha ZEROUALI
12:20– 12:30 ID : 4964 “Contribution à la valorisation du sable de dunes comme addition cimentaire”, Abdelaziz LOGBI
“QSPR study of the boiling point of anilines”,
12:30 – 12:40 ID:9715
Nour-Eddine KERTIOU
“Double oxide Perovskite Ba2EuMoO6 based photovoltaic absorbers: by first- principles calculations”
12:40 –12:50 ID: 5328
Rekia LARBI
12:50 –13:00 ID: 5533 “Numerical simulation of double buffer layer on CZTSSe thin film solar cell”, Essaid MANSOURI
13:00 – 14:30 Lunch
14:30 – 15:45 Oral session IV
Plenary Session II (Conference Hall, Room1)
Session Chairs: Prof. Grigorian Souren; Prof. Goussem Mimen; Prof. Benoudia Mohamed Cherif; Prof. Djelloul Abdelkader
Plenary speaker Prof. Abdelhafidh KHELIDJI, France
14:30 – 14:55 Transferts et couplages dans les bétons : évolution de quelques indicateurs
de durabilité en fonction des sollicitations physico-mécaniques
Plenary speaker Prof. Arezki BENFDILA, Algeria
14:55 – 15:20
3D Advanced CMOS Technology and Applications

Plenary speaker Prof. Shems Eddine DERFOUF, Algeria

15:20 – 15:45
Elaboration of new biocomposite materials made from vegetable fibers

15:45 – 16:00 Coffee break

16:00 – 17:30 Oral session V
Room1/ Topic: Materials, Properties and Characterization, Materials Engineering, Chemistry - Quantum Chemistry
Session Chairs: Dr. Mohamed Ben Nasser, Dr. Baazouzi Messoud, Dr. Takouacht Radhwane
“Effect of relative density on the mechanical response of TPMS structures subjected to quasi-static
16:00 – 16:10 ID: 6487
compression loadings”, Ilyas BENSALEM
ID: 6521 “Finite element investigation of the elasto-plastic behavior of AA6005 using the Hansel Spittel rheological
16:10 – 16:20
model and the Cockcroft and Latham fracture model”, Ridha BADI
16:20 – 16:30 ID: 6533 “Calibration of a microscopic vision system by projection of periodic patterns”, Hichem BOUALI
16:30 – 16:40 ID: 6595 “Characterization study of earthen bricks used in the old buildings of the city of Boussaâda”, Naoui TALLAH
“Optimization of incremental forming process of AA1050-H14 aluminum alloy by using martyr sheet”,
16:40 – 16:50 ID: 6768
Romdhane OTHMANI
16:50 – 17:00 ID: 3162 “Computational molecular modeling of some supramolecular structures”, Safia HIMRI
17:00 – 17:10 ID: 4477 “The impact of crystallite size on the catalytic properties of TS-1 zeolite”,Thilali AKKAL
“The Influence of Addition Sand (SiO2) On Yeelimite-Based Cement Prepared by Natural Materials”,
17:10 – 17:20 ID: 4538
Zeyneb HAMMOU
“Study of the stability of Sars-CoV2 major proteases complexes with the active compounds of Cypress and
17-20 – 17:30 ID: 3003
Eucalyptus by docking molecular and molecular dynamics, Wafa SOUDANI
“In silico study of novel compounds inhibitors of angiotensin-converting enzyme as therapeutic options in the
17:30 – 17:40 ID: 5812
treatment of various tumors”, Yazid BEDOUH

4
 1stInternational Conference on Materials Science and Technology (MatScience-2022)
13-15 December 2022, Khenchela, Algeria
Room2/ Topic: Nanomaterials and Nanotechnology, Functional Materials, Composite Materials,
Biomaterials, Theoretical & Computational Approach for Nanoscience, Applied Ceramic
Technology
Session Chairs Dr. Chermim Brahim, Dr. Amina Touati , Dr. Lekmine Farid
“Thermal behavior of isotactic polypropylene composite filled with microtalc (iPP/µTalc)”,
16:00 – 16:10 ID: 6547
Azzedine MAKHLOUF
“Various boundary conditions and CNT distribution effects on the Natural Frequency of reinforced composite
16:10 – 16:20 ID: 6885
nano-plates resting on Kerr/ Pasternak /Winkler elastic foundation”, Bachiri ATTIA
“Experimental and statistical analysis of mechanical behavior of date palm surface fibers reinforced mortar”,
16:20 – 16:30 ID: 6969
Khelifa HOCINE
“Green synthesis, characterization of CuO nanoparticles and study of their photocatalytic and antibacterial
16:30 – 16:40 ID: 7255
properties”, Sihem OUCHENANE
“Optimization of the mass of laminated composite structures stressed in membrane and bending”,
16:40 – 16:50 ID: 7615
Mohmmed BETTAYEB
“Fundamental physical properties of the wurtzite ZnO1-xTex ternary alloy: A first principal study”,
16:50 – 17:00 ID: 7720
Rabah MOUSSA
17:00 – 17:10 “Structural, microstructural study of nanostructured Fe70Si25Cr5 developed by powder metallurgy”,
ID: 7810 Ali MAMERI
17:10 – 17:20 “Thermal stability analysis of thin rectangular FGM plates resting on variable elastic foundations”,
ID: 7968
Mounir TAKOUACHET
17-20 – 17:30 “Methane activation on Ni cluster supported on Ni-Cu (100) surface using density functional theory”,
ID: 8292
Somia BENCHIKH
Room3/ Topic: Energy Materials, Materials and Environment, Renewable Energies
Session Chair: Dr. Kihal Rafiaa, Dr. Leila Chaabne,
16:00 – 16:10 ID: 6832 “Effect of annealing on properties of CuO:Ni thin films deposited by spray pyrolysis”, Labidi HERISSI

“Study of the effect of a natural additive 'Pistacia Lentiscus and brassica oleracea L' on the
16:10 – 16:20 ID: 8568
electrocrystallisation of a Zn-Fe alloy”, Samia AMIRAT
“Numerical investigations of multiphase flow in the kenics static mixer”,
16:20 – 16:30 ID: 5202
Ourdia BENABDELLAZIZ
“Influence of temperature on the microstructure and mechanical properties of cemented carbides elaborated
16:30 – 16:40 ID: 9912
by hot isostatic pressing”, Hassiba RABOUHI
“A neural network approach for estimating the remaining useful life of high-speed wind turbine shaft
16:40 – 16:50 ID: 4521 bearings”, Abdelnour Seddar YAGOUB
“Effects of spinning velocity on structural and optical properties of perovskite films prepared by two steps sol-
16:50 – 17:00 ID: 9293 gel method”, Fatima KHELFAOUI
17:00 – 17:10 ID: 9346 “TCAD characterization of Si Ultra-Thin Insulated Gate Bipolar Transistor IGBT”, Iman FOURA
17:10 – 17:20 ID: 9496 “Study on effect of date palm fibers length on fresh and hardened properties of SCC”, Dounia DERDOUR
17-20 – 17:30 ID: 9663 “Structural, Physical Mechanical, and tribological Properties of CrAlN and CrVN”, Faiza SALHI
“Improvement of the Wear Resistance of AISI-4140 Steel by Duplex Treatment Combining Gas Nitriding and
17:30 – 17:40 ID: 4941
Physical Vapor Deposition”, Mohamed Ali TERRES
Poster session IV
8248 ; 8382 ; 8385 ; 8407 ; 8564 ; 8856 ; 8893 ; 9088 ; 9320 ; 9566 ; 9915 ; 2314 ; 1485; 8016 ; 8071 ; 5118 ; 7954 ;
14:30 – 17:30 9106 ; 3249 ; 8960 ; 9507 ; 9837 ; 5978 ; 6151 ; 9717 ; 5592 ; 5880 ; 6108 ; 6163 ; 6242 ; 6432 ; 6477 ; 6721 ; 6741 ;
6944 ; 7051 ; 7149 ; 7375 ; 7380 ; 7562 ; 7593 ; 7641 ; 7346 ; 7545 ; 7965 ; 8326 ; 8538 ; 8608 ; 8628 ; 4292 ; 8818 ;
9021 ; 9213 ; 9110 ; 9901 ; 3080 ; 9442 ; 9635
December15th, 2022
Plenary Session IV (Conference Hall, Room1)
Session Chair: Prof. Benfdila Arezki, Prof. Akram Alhussein, Prof. Messai Amel
Plenary speaker Prof. Mohamed Cherif BENOUDIA, Algeria
9:00 – 9:30
Mechanical behaviour of π-conjugated polymer from in-situ GIXD

Plenary speaker , Dr. Serdar ÖZKAYA, Turkey

9:30 – 10:00
Mechanical properties of natural hydroxyapatite matrix Ag/CNT reinforced biomaterials

Plenary speaker Prof. Ammar Yahia, Canada

10:30 – 10:30
Impression 3D Béton : Avantages, défis et perspectives

5
 1stInternational Conference on Materials Science and Technology (MatScience-2022)
13-15 December 2022, Khenchela, Algeria
Poster Session V
8264 ; 8364 ; 8604 ; 8710 ; 8842 ; 8923 ; 8931 ; 9177 ;9188 ; 9345 ; 9356; 9689 ; 9793 ; 9851 ; 9909 ; 7773 ; 7821 ; 7840 ;
09:30 – 12:30 7860 ; 7896 ; 8026 ; 5337 ; 5405 ; 5424 ; 5491 ;5499 ; 5553 ; 1060 ; 1091; 1292 ; 3391 ; 3460 ;3510 ; 3535 ; 3636 ; 3674 ;
0651 ; 0743 ; 0651; 0990 ;1030 ; 1648 ;1676 ; 1831 ; 1901 ; 2096 ; 2186 ; 2365 ; 2667 ; 3131 ; 3233 ; 3616 ; 3940 ; 4335;
4072 ; 4176 ; 4449 ; 4643 ; 5236 ;5310 ; 5316 ; 5373 ; 5452 ; 5632 ; 5650 ; 6309 ; 6427 ; 6531 ;6752 ; 6809 ; 7128 ; 7737 ;
7994 ; 6830 ; 6896 ; 6975 ; 8059 ; 9923 ;7248 ; 8934; 4331; 1481; 6140; 6195; 6609; 5221; 5074.
10:30 – 10:45 Coffee break
10:45- 13:00 Oral session VI
Room1/ Topic: Materials, Properties and Characterization, Materials Engineering, Chemistry - Quantum Chemistry
Session Chair: Dr. Medour Belkacem, Dr. Boughougal Amina,
“In silico study of the dehydroacetic acid derivatives against SARS-CoV-2 by molecular docking method”,
10:45 – 10:55 ID: 8057
Abdenour GUERRAOUI
“Modeling of Henry’s Law Constant of Carbamates and Triazines Pesticides Based on Genetic Algorithm-
10:55 – 11:05 ID: 8093
Linear Regression”, Amel BOUAKKADIA
“In situ Study of Gravity Effect on the Microstructure Formation Dynamic During Solidification”,
11:05 – 11:15 ID: 8103
Hadjer SOLTANI
“Catalytic Aerobic Oxidation of Diols by Anderson Polyoxometalate (NH4)5[IMo6O24]: Theoretical Study of
11:15 – 11:25 ID: 8153
the Mechanism”, Amar SAAL
“Effect of Luffah fiber concentration on mechanical properties of biocomposite materials”, Lakhemissi
11:25 – 11:35 ID: 8282
TOUAM
“Study of combined concentrating solar power plant and desalination small scale capacity in Algerian aride
11:35 – 11:45 ID: 8385
areas”, Mohammed LAISSAOUI
11:45 – 11:55 ID: 8366 “Liquid phase sintering modeling”, Hassiba RABOUHI
11:55 – 12:05 ID: 8398 “Study of primary recrystallization mechanisms in an IF steel”, Abdelhak AYAD
12:05 – 12:15 ID:9206 “Identification of hot wear mechanisms in the gravity casting of aluminum alloys”, Mohamed NASSER
“Theoretical study of structural, electronic, magnetic, mechanical, and thermodynamic properties of
12:15 – 12:25 ID: 7129
Cu2MnAl-type Co2CrBe full-Heusler alloys”, Hadjer FRIOUI
“Elaboration of a bio-composite material based on a biopolymer and an inorganic filler: synthesis process,
12:25 – 12:35 ID: 5552
characterizations and applications”, Ikram DRAI
“Producing Of Ceramic Membrane from Glass Waste Using Alkali-activated Method”, Khaoula
12:35 – 12:45 ID: 3102
KARBOUCHE
12:45 – 12:55 ID: 6248 “Numerical Simulation of Parallel Flow in a Double-Pipe Heat Exchanger”, Lylia DAI
“Photocatalytic degradation of orange G dye using ZnO nanoparticles synthesized by different methods”,
12:55 – 13:05 ID: 6214
Sabrina AZIRI
“The Effect of Milling Time on the Tribological Performance of an α+β Titanium alloy Designed for
13:05 – 13:15 ID: 6009
Biomedical Applications”,Chaima BOUKHALFA
13:15 – 13:25 ID: 6088 “Electronic and magnetic properties of (Ru0.5Co0.5)2FeSi heusler alloys”,Soufyane BELHACHI
Room2/ Topic: Nanomaterials and Nanotechnology, Functional Materials, Composite Materials, Biomaterials,
Theoretical & Computational Approach for Nanoscience, Applied Ceramic Technology
Session Chairs: Dr. Chergui Laid; Dr. Abdelghani Kenzour; Dr. Messas Tidjani
“P-Extended tetrathifulvalene with bipyridine ligand: a versatile system for organic electronic”, Amel
10:45 – 10:55 ID: 8543
ZITOUNI
“A highly sensitive 4-aminophenol sensor based on a platinum nanoparticle modified screen-printed
10:55 – 11:05 ID: 8703
electrode”, Fatima Zahra MAKHLOUF
“Tribocorrosion behavior of the uncoated titanium alloy and coated with a layer of hydroxyapatite”,
11:05 – 11:15 ID: 9048
Fatma Zohra DERRADJI
“Formulation Optimization of Ascorbic Acid Microcapsules Employing an Experimental Design Approach”,
11:15 – 11:25 ID: 9708
Leila CHABANE,
“Thermal stability analysis of perfect and porous FGM beams on different models foundations”,
11:25 – 11:35 ID: 5138
Mohamed MEKERBI
11:35 –11:45 ID: 8336 “Study of the vibrational behavior of functionally graded cracked beam”, Narimane HASSAINE
11:45 – 11:55 ID: 8383 “Removal of organic matter in aqueous solution by photo activation of persulfate”, Rayene KOLIAI
11:55 – 12:05 ID: 9783 “Electromagnetic Modeling of Silicon NanoWire Array Photonic Crystal”, Yassine SAYAD,
12:05 – 12:15 ID: 0762 “Nanotechnology in wastewater treatment”, Ikram AOUADJ

6
 1stInternational Conference on Materials Science and Technology (MatScience-2022)
13-15 December 2022, Khenchela, Algeria
“Numerical analysis of mechanical behaviour for a type III hydrogen pressure vessel (15 MPa) made of an
12:15 – 12:25 ID: 1481
aluminum liner and a thick carbon and Jute/epoxy composite”,Abdelhakim MAIZIA
“Barium oxide-graphene oxide nano-composite: synthesis and its catalytic effect on the thermal behaviour of
12:25 – 12:35 ID: 3899
nitrocellulose-based mixture”, Elamine LOUAFI
12:35 – 12:45 ID:1241 “First-principal study of the structural and elastic properties of ternary Ti2InN”, Rahma KHEDIRI
“Effects of cell wall thickness variations on the mechanical response of Honeycomb structures subjected to
12:45 – 12:55 ID:7935
quasi-static compression loading”, Abdelghani KHENNAB
“Nanometric modeling of interfacial defects of a heterostructure GaAs/Si in the cases of isotropic and
12:55 – 13:05 ID: 5357
anisotropic for the study the influence of displacements and stress fields”, Rafik MAKHLOUFI
“Effect of various surface treatments on the performance of opuntiaficusindica fibers filled
13:05 – 13:15 ID: 5443
polylactidebiocomposites”,Arezki ALANE
“DFT study; Charge-Transport Properties of the (2,2'-bithiophene) and (2,2'-bipyrrole)”, Souhila
13:15 – 13:25 ID: 5739
BEKHBEKH
Room3/ Topic: Materials, Properties and Characterization, Functional Materials, Materials Engineering, Functional
Materials, Energy Materials, Materials and Environment, Renewable Energies, Theoretical & Computational Approach
for Nanoscience
Session Chairs: Dr. Maamri Fouzia, Dr. Fahem Sakher, Dr.Rebai Bilel
“Thermo mechanical free vibration analysis of porous functionally graded plate using a new refined high
10:45 – 10:55 ID: 1660
order shear deformation theory”, Mohammed Amine KENANDA
“High-Speed Turning of Cold Working Steel Characterization: Impacts of Operating Parameters Responses
10:55 – 11:05 ID: 6165
Surfaces Methodology”, Hichem GUIZANI
11:15 – 11:25 ID: 3093 “Hot corrosion behavior of Mg2SiO4 ceramic exposed to molten Na2SO4 at 900-1100°C”, Hamza MILLES
“Thixotropic behavior of GGBS-based cements: Combined effects of Ground Granulated Blast-furnace Slag
11:25 – 11:35 ID: 8929
and Nano-SiO2”,Abdelhakim DAOUI
“Bouc-Wen Model Parameters Optimization Using a Naturally Inspired Meta-Heuristics Algorithm”,
11:35- 11:45 ID: 6838
Khaled ZIZOUNI
“Effect of substrate temperature and annealing time on the optical and mechanical properties of a glass coated
11:45- 11:55 ID: 6867
by spray pyrolysis”,Oumessad GRIDI
“Effect of (Sr, Al, Cu,Zn) doping on structural, optical and electrical properties of sprayed SnO2thin film”,
11:55 – 12:05 ID: 1629
Imene SAOULA
12:05 – 12:15 ID: 5952 “Synthesis and characterization of functional ZnO thin films”,Selwa KEBAILI
“Mechanical characterization of thermoplastic polymers by instrumented nanoindentation”, Ahcene
12:15 – 12:25 ID: 5954
MOKHTARI
“Synthesis, structural studies of complexes Cu (II), Ni (II), Cd (II) with Schiff Base Isonicotinic Acid (1-phenyl-
12:25 – 12:35 ID: 5994
ethylidene) -Hydrazide”, Ali Akram DERARDJA
“Inverse Identification of material parameters of nickel-based superalloy IN718 using Finite element and
12:35 – 12:45 ID: 6122
multi-objective optimization”, Leila KERDJA
12:45 – 12:55 ID: 6248 “Numerical Simulation of Parallel Flow in a Double-Pipe Heat Exchanger”, Lylia DAI
“The effect of TiN and CrN interlayer thicknesses on the tribological behavior of the sputtered TiN/CrN
12:55 – 13:05 ID: 8353
coatings”, Taous Doria ATMANI
“Effect of uncertainties on structural reliability of graphite reinforced polymer composite pressure tanks”,
13:05 – 13:15 ID: 5796
Youcef SID AMER
13:30 – 14:30 Lunch
14:30 – 14:45 Closing Ceremony