Datasheet
ST 6100
Track, monitor and control in isolated regions.
The ST 6100 satellite terminal delivers complete visibility and control of industrial
assets operating in remote areas. The versatile, environmentally sealed ST 6100 Fully programmable
can be installed on mobile assets such as light-and heavy-duty commercial
vehicles, railcars, fishing vessels, heavy equipment and more. With two-way Comprehensive
satellite connectivity, it’s ideal for remotely monitoring and controlling SCADA integration resources
applications including pipelines, flow meters, pumps, generators and tanks. for quick deployment
Two-way satellite
Easy integration communications
The fully programmable ST 6100 includes comprehensive resources to
facilitate integration into a wide range of solutions. These include development, Ruggedized
testing and production environments, documentation, code samples, device- and versatile
level configurable applications and free technical support.
Global satellite connectivity
The ST 6100 communicates over the OGx and IDP satellite services for
uninterrupted visibility of operations and field data virtually anywhere.
Comprehensive feature set
The ST 6100 offers enhanced functionality at great value. The internal antenna
features exceptional low elevation angle performance, allowing one device to
support both terrestrial and maritime applications. The ST 6100 also features a
built-in accelerometer, expanded memory capacity and enhanced support for
GPS, Glonass and Beidou.
Specifications
Satellite communication Electrical ‣ AVL: Supports ST 6100 integration
into fleet management solutions.
• Satellite service: two-way, Global, • Input voltage: 9 to 32V; Load dump
‣ Garmin Dispatch app: Tracking,
OGx or IsatData Pro protection: +150V; SAE J1455 (Sec. 4.13)
navigation, driver communication and
• Maximum message size: • Power consumption (typical average dispatch using Garmin devices.
‣ OGx: From-mobile 1 MB, to-mobile 1 MB @12V DC, 22°C): ‣ Sensors: Generates reports, alarms
‣ IsatData Pro: From-mobile 6.4 kB, ‣ IDP Receive: 65 mA; and histograms from connected
to-mobile 10 kB ‣ GPS/Glonass/Beidou Receive: 22 mA; sensors and devices.
• Typical latency: <15 sec, 100 bytes ‣ Transmit: 0.65 A; ‣ Modbus: Enables data processing
• Elevation angle: 0° to +90° ‣ Sleep: 100 μA and alarms from Modbus device data.
• Frequencies: ‣ Vessel Monitoring System: Location
‣ OGx: Rx 1525.0 to 1559.0 MHz; tracking, status monitoring and
Tx 1626.5 to 1660.5 MHz External interfaces behavior monitoring.
‣ IsatData Pro: Rx 1525.0 to 1559.0 • Inputs/outputs: 4 analog or digital in/out
MHz; Tx 1626.5 to 1660.5 MHz • Serial: RS-232; RS-485
Memory
• EIRP: <7.0 dBW
• Lua Code RAM: 4MB
Environmental • Lua Code NVM: 8MB
Dimensions • Operating temperature: -40°C to +85°C
• 12.6 cm x 12.6 cm x 4.9 cm • Dust and water ingress: IP67
• Vibration: SAE J1455 (Sec 4.9.4.2 fig 6-8);
Options
• Side or bottom connector variants
MIL-STD-810G (Sec 514.6)
Accelerometer • Shock: MIL-STD-810G (Sec 516.6)
• 3-axis accelerometer
Order codes
• ST6100-SXX ST 6100 Terminal,
Programming
GPS/Glonass/Beidou/Galileo • Lua scripting engine with core services.
Side Connector
• Acquisition time: Hot: 1 second; • ST6100-BXX ST 6100 Terminal,
SDK with GUI development tools available.
Cold: 29/30/36/29 seconds Bottom Connector
Lua software application and firmware
• Accuracy: 2.0m CEP upgradable over the air (SOTA, FOTA) • ST6100-BXXC ST 6100 Terminal,
• Sensitivity: Bottom Connector, C1D2
• Core services: Geofence, data logger,
‣ Acquisition: -148 dBm position reporting, accelerometer events, • ST6101-SXX ST 6101 Terminal,
‣ Tracking: -163 dBm serial communications Side Connector
• AES 256 encryption-capable • ST6101-BXX ST 6101 Terminal,
Bottom Connector
• Optional, configurable terminal apps:
Certification • ST100968-001 ST 6100 Development Kit
‣ Analytics: Notifications and reports
• ST 6100 Regulatory: CE, FCC, IC, Anatel, • ST100030-001 Mating Cable Connector
for driver behaviour and vehicle/
RCM Mark, IEC 60945, C1D2, SRRC, IFT, asset performance. Kit with Solder Cups
ICASA, FFA • ST301005-001 ST 6100 Blunt cut
‣ Garmin FMI: Support for text
• ST 6101 Regulatory: CE; Pending: FCC, messaging, stops, driver ID, hours of cable, 5m
IC, Anatel, RCM Mark, IEC 60945, C1D2, service, file-transfer, custom forms, • ST101192-001 ST 6100 Starter Kit
SRRC, IFT, ICASA, FFA and speeding alerts. • ST101193-001 ST 6100 Field cable
• Others: Inmarsat Type Approval, IP67
Although we strive to ensure accuracy in all of our published specifications, actual field performance can vary depending on a variety
of environmental, installation and usage factors, as well as third-party factors such as cellular providers. The specifications listed are
approximations, and do not constitute binding statements or modify the terms and conditions of purchase or lease including, but not limited
to, product operational limitations and warranties. All specifications are subject to change without notice. Please check www.orbcomm.com
to ensure you have the latest version of these specifications.
Visit our website www.ORBCOMM.com
ORBCOMM is a pioneer in IoT technology, empowering customers with insight to make data-driven decisions that help them optimize their operations,
maximize profitability and build a more sustainable future. With 30 years of experience and one of the most comprehensive solution portfolios in the
industry, ORBCOMM enables the management of over a million assets worldwide for a diverse customer base spanning transportation, supply chain,
heavy equipment, maritime, natural resources and government. For more information about how ORBCOMM is driving the evolution of industry through
the power of data, visit www.orbcomm.com.
© ORBCOMM 2024. All rights reserved. 191124A
