SS510

SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER

VOLTAGE 100 Volts CURRENT 5.0 Ampere

FEATURES
* Ideal for sur face mounted applications
* Low leakage current
* Metallurgically bonded construction
Mounting position: Any
Weight: 0. 24 gram
DO-214AB

   

 
MECHANICAL DATA  

Epoxy: Device has UL flammability classification 94V-O

 
 

 
 
 
 

   

   
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 o C ambient temperature unless otherwise specified.
 
Single phase, half wave, 60 Hz, resistive or inductive load.  

For capacitive load, derate current by 20%.

Dimensions in inches and (millimeters)

MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted)

RATINGS SYMBOL SS510 UNITS
Maximum Recurrent Peak Reverse Voltage VRRM 100 Volts
Maximum RMS Voltage VRMS 70 Volts
Maximum DC Blocking Voltage VDC 100 Volts
Maximum Average Forward Rectified Current
IO 5.0 Amps
at T A =100 OC
Peak Forward Surge Current 8.3 ms single half sine-wave
I FSM 150 Amps
superimposed on rated load (JEDEC method)
$VSSFOU 4RVBSBE 5JNF  
*U 93 " 4FD
RθJA 50
Typical Thermal Resistance (Note 1) 0
C/W
RθJL 13
Typical Junction Capacitance (Note 3) CJ 200 pF
Operating Temperature Range TJ 150 0
C
0
Storage Temperature Range T STG -55 to + 150 C
ELECTRICAL CHARACTERISTICS (@TA=25 OC unless otherwise noted)
CHARACTERISTICS SYMBOL SS510 UNITS
Maximum Instantaneous Forward Voltage at 5.0A DC VF .85 Volts
o
Maximum Average Reverse Current @T A = 25 C 0.2 mA
IR
at Rated DC Blocking Voltage @T A = 100 o C 2 mA
NOTES : 1. Thermal Resistance : Mounted on PCB. 2016-08
2. Measured at 1 MHz and applied reverse voltage of 4.0 volts. REV: O
3. "Fully ROHS compliant", "100% Sn plating (Pb-free)".
 RATING AND CHARACTERISTICS CURVES (SS510)

6 10

INSTANTANEOUS REVERSE CURRENT, (mA)

AVERAGE FORWARD CURRENT, (A)

5
1.0
4

P.C.B. Mounted on TA = 100 OC

3 0.480.4"(10 810mm) 0.1
copper pad areas
2
Single Phase Half Wave 0.01
60Hz Inductive or
1
Resistive Load TA = 25 OC
0.375" (9.5mm) Lead Length
0 0.001
0 50 100 150 0 20 40 60 80 100 120 140
O
AMBIENT TEMPERATURE, ( C) PERCENT OF RATED PEAK REVERSE VOLTAGE, (%)
FIG.1 TYPICAL FORWARD CURRENT FIG.2 TYPICAL REVERSE
DERATING CURVE CHARACTERISTICS
50 400
INSTANTANEOUS FORWARD CURRENT, (A)

CJ, JUNCTION CAPACITANCE, (pF)

TJ = 25 OC

200
10

100
80
60
1.0 40
TJ = 25 OC
Pulse width=300μS
1% Duty Cycle 20

0.1 10
0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 0.1 0.4 1.0 4 10 40 80100
INSTANTANEOUS FORWARD VOLTAGE, (V) REVERSE VOLTAGE, (V)

FIG.3 TYPICAL INSTANTANEOUS FORWARD

FIG.4 TYPICAL JUNCTION CAPACITANCE
CHARACTERISTICS

150
PEAK FORWARD SURGE CURRENT, (A)

8.3mS Single Half Sine-Wave

JEDEC Method
125

100

75

50

25

0
1 2 5 10 20 50 100
NUMBER OF CYCLES AT 60Hz
FIG.5 MAXIMUM NON-REPETITIVE FORWARD
SURGE CURRENT
Marking Description

Rectron Logo
5 S10 Part No.
Voltage-code
V Y W W 10-------100V

Cathode Band

Year – code
(Y: Last digit of year & Week – code
A:2010,B:2011......) (WW: 01~52)
 Mounting Pad Layout

0.185 MAX.
(4.69 MAX.)

0.121MIN.
(3.07 MIN.)

0.060 MIN.
(1.52 MIN.)

0.320
(8.127 ) REF

Dimensions in inches and (millimeters)

 REEL TAPING SPECIFICATIONS FOR
SURFACE MOUNT DEVICES-FLAT MELF
( SMA/SMB/SMC )

P0

P1
d

F
W
B

A P D2 D1

o A o W1
MAX. 3 MAX. 3 D
T

R C

Fig.: Configuration of FLAT MELF TAPING

(SMA/SMB/SMC)

ITEM SYMBOL DO214AC (SMA) mm(inch) DO214AA (SMB) mm(inch) DO214AB (SMC) mm(inch)
Carrier width A 2.6 0.15 (.102 .006) 3.65 0.1 (.144 .004) 6.0 0.1 (.236 .004)
Carrier length B 5.15 0.15 (.203 .006) 5.69 0.1 (.224 .004) 8.30 0.1 (.327 .004)
Carrier depth C 2.3 0.15 (.091 .006) 2.67 0.1 (.105 .004) 2.5 0.1 (.098 .004)
Sprocket hole d 1.5 0.1 (.059 .004) 1.5 0.1 (.059 .004) 1.5 0.1 (.059 .004)
Reel outside diameter D 1782.0 (7.0 .079) 178 2.0 (7.0 .079) 178 2.0 (7.0 .079)
Reel inner diameter D1 50 Min. 50 Min. 50 Min.
Feed hole diameter D2 13 0.5 (.512 .020) 13 0.5 (.512 .020) 13 0.5 (.512 .020)
Strocket hole position E 1.5 0.1 (.059 .004) 1.5 0.1 (.059 .004) 1.5 0.1 (.059 .004)
Punch hole position F 5.65 0.05 (.222 .002) 5.65 0.05 (.222 .002) 7.65 0.05 (.301 .002)
Punch hole pitch P 4.0 0.1 (.157 .004) 8.0 0.1 (.315 .004) 8.0 0.1 (.315 .004)
Sprocket hole pitch P0 4.0 0.1 (.157 .004) 4.0 0.1 (.157 .004) 4.0 0.1 (.157 .004)
Embossment center P1 2.0 0.1 (.079 .004) 2.0 0.1 (.079 .004) 4.0 0.1 (.157 .004)
Totall tape thickness T 0.30 .05 (.012 .002) 0.6 Max. 0.6 Max.
Tape width W 12.0 0.2 (.472 .008) 12.0 0.2 (.472 .008) 16.0 0.2 (.630 .008)
Reel width W1 16.8 2.0 (.661 .079) 16.8 2.0 (.661 .079) 24.0 2.0 (.945 .079)
Notes: 1.Devices are packed in accordance with EIA standard RS-481-A and specification given above.
2.Available on 7 inch ( 1500 ct. ) or 13 inch ( 5000 ct. ) diameter reels.
67
 PACKAGING OF DIODE AND BRIDGE RECTIFIERS
REEL PACK
PACKING EA PER COMPONENT TAPE SPACE REEL DIA CARTON SIZE EA PER GROSS
PACKAGE
CODE REEL SPACE(mm) (mm) (mm) (mm) CARTON WEIGHT(Kg)

SMC -T 500 --- --- 176 390*205*310 12,000 6.65

SMC -W 3,000 --- --- 330 355*360*350 24,000 11.50

 DISCLAIMER NOTICE

Rectron Inc reserves the right to make changes without notice to any product
specification herein, to make corrections, modifications, enhancements or other
changes. Rectron Inc or anyone on its behalf assumes no responsibility or liabi-
lity for any errors or inaccuracies. Data sheet specifications and its information
contained are intended to provide a product description only. "Typical" paramet-
ers which may be included on RECTRON data sheets and/ or specifications ca-
n and do vary in different applications and actual performance may vary over ti-
me. Rectron Inc does not assume any liability arising out of the application or
use of any product or circuit.

Rectron products are not designed, intended or authorized for use in medical,
life-saving implant or other applications intended for life-sustaining or other rela-
ted applications where a failure or malfunction of component or circuitry may di-
rectly or indirectly cause injury or threaten a life without expressed written appr-
oval of Rectron Inc. Customers using or selling Rectron components for use in
such applications do so at their own risk and shall agree to fully indemnify Rect-
ron Inc and its subsidiaries harmless against all claims, damages and expendit-
ures.

RECTRON