00.00.00 VERSION NO.

01
HD16 JN.00000 PN.000000-00-00
Supersonic nural

User manual

Back view of the Dyson Supersonic

Nural hair dryer

Contents
In the box Styling attachments
Getting started LEDs
Nural™ sensors Regular filter cleaning
Capsule illumination

Dyson logo
In the box

Dyson Supersonic Nural™ hair dryer

Back view of the Dyson Supersonic Nural™ hair dryer.

Starting at the head of the machine, the Scalp protect
button is at the top, airflow button on the left, and
temperature button on the right. The handle has
power and Cold shot buttons at the top, and the
filter cage at the bottom.

Gentle air attachment Styling concentrator Wide-tooth comb Wave+Curl diffuser Flyaway attachment

Flat nozzle with Flattened, Comb attachment Domed attachment Flat, curved nozzle.
a rippled texture. flared nozzle. with long, widely- with removable
spaced tines. prong bed.
Getting started
View of the back of the Dyson Supersonic Nural hair dryer
showing the airflow button with LED lights on the left, the
temperature button with LEDs on the right, and the Scalp
protect button at the top. The power button and cold shot
buttons are below, on the handle.
LEDs
Scalp protect mode on/off The LED lights are on
Scalp care is activated the back of the
The Scalp protect button
by default on first use. cylindrical head of the
is on the back, at the top
hair dryer. They are
of the cylindrical head
above the airflow and
of the hair dryer.
temperature buttons.
There are three LED
lights on each side,
Capsule which light up as the
Home to the The capsule is corresponding button
Time of Flight sensor, suspended in the is pressed. These lights
Hall sensor and middle of the hair also indicate when your
Capsule illumination. dryer's central bore. filter needs cleaning
or if there is a fault.

Airflow control
3 precise settings: The airflow control Temperature control
- Fast/High button is on the back 4 precise heat settings.
- Gentle/Medium left-hand side of The temperature
- Mild/Low the cylindrical head control button is on
of the hair dryer. the back right-hand
side of the cylindrical
head of the hair dryer.

Power on/off
Sliding switch.
The power button
is on the back, at
the top of the handle.
It is a slider button
that pushes upwards
or downwards.

Cold shot
Press and hold to
deactivate heat
and set style.

The Cold shot button is

on the back of the
handle of the hair
dryer, just below
the power button.

Air inlet
The air inlet is covered Removable filter cage
by the filter and is at the
Easy to remove for cleaning.
bottom of the handle.
The filter cage is at the
bottom of the handle.
Nural™ sensors

A network of Nural™ sensors helps the Dyson Supersonic Nural™ Two images of a woman using the Dyson Supersonic Nural hair dryer.
hair dryer enhance and optimise your hair care routine. On the left, the hair dryer is in Medium heat setting. On the right, the
dryer is closer to the hair and Scalp protect mode has automatically
adapted to Low heat setting.

Scalp protect mode

A Time of Flight sensor measures distance, automatically
reducing heat as it moves closer to your hair. To maintain
a comfortable, consistent scalp temperature.

Pause detect The Dyson Supersonic

A motion-sensing accelerometer knows when it’s put down, Nural hair dryer laying
automatically deactivating the heater, and decreasing flat with Pause detect
airflow and noise. Capsule illumination will pulse blue. mode activated.
Heat is off, airflow is
minimal, and Capsule
illumination is blue.

Tip: To be sure Pause detect has activated, wait for the motor
sound to ramp down before lifting your hand off the hair dryer.
Capsule illumination will pulse blue.

Attachment learning
A Hall sensor recognises which styling attachment is connected,
automatically switching to its last-used settings.

Capsule illumination

The suspended capsule changes colour to show the current heat setting.
Heat, and colour, will auto-adapt in Scalp protect mode.

High heat

Medium heat

Low heat

No heat

The capsule is suspended in the

central bore of the hair dryer. LED
lights in the capsule glow red to
indicate high heat, orange for
medium heat, yellow for low heat,
and blue for no heat.
Offering and small details may vary to those shown.
Styling attachments

Attachment learning recognises your Intelligent attachments

and learns your go-to styling preferences for each.

All attachments are magnetic, for easy rotation and fitting.

Heat Shield technology keeps the surface of your styling
attachments cool. Remove your attachments using the cool edges.

Styling attachment Heat and Works with Works with

airflow presets Scalp protect mode Pause detect

Gentle air attachment

High heat
Evenly diffuses airflow for gentle Yes Yes
High flow 1

yet fast drying.

Styling concentrator High heat

Yes Yes
Wider and thinner, for precision styling. Medium flow

Wide-tooth comb High heat

Yes
Helps stretch and lengthen hair. High flow

Wave+Curl diffuser Medium heat

Disperses airflow in two different ways. Medium flow

Flyaway attachment Low heat

Yes
Coanda airflow to hide flyaways. 2
High flow

1. Gentle air attachment follows the same default presets as the hair dryer with no attachment connected. 2. For use on dry and straight[ened] hair.
LEDs

Settings
The LED lights indicate which settings you are using.

Airflow Three white LEDs

Fast/High
illuminated.

Two white LEDs Gentle/Medium

illuminated.

One white LED Mild/Low

illuminated.

Temperature
Maximum operating temperature in normal working conditions: 105°C.
Maximum thermistor temperature at safety shut down: 145°C.

Three red LEDs High

illuminated.

Two red LEDs Medium

illuminated.

One red LED Low

illuminated.

No red LED Cool

illuminated.

Diagnostics
The LEDs will flash continuously to let you know that your machine
needs attention.

Clean the filter. Follow the instructions or watch the video at Three flashing
dyson.com/yoursupersonicnural. white LEDs.

If all three red lights continue to flash, contact the Dyson Helpline. Three flashing
red LEDs.
Don’t turn back on.
Regular filter cleaning

Check your filter is clear of debris and hair product residue every month,
or when the LED lights alert you.

Maintaining performance
Unplug your machine from the mains electricity supply and allow it
to cool down before cleaning your filter.

The Dyson Supersonic Nural™ hair dryer has highly tuned technology
to give outstanding performance.

This technology needs to be kept free from debris and hair product
residue. Regular maintenance is required to maintain performance.

Close-up of the filter cage

removed from the filter.
A cloth gently cleans the
filter and the cage.

Step 1 Close-up of the

Hold the handle of your machine firmly and gently rotate the filter removable filter
cage anti-clockwise. cage at the
bottom of the hair
dryer. Arrows
indicate twisting
to the left and
Step 2 pulling away.
Pull down and away from the machine. Use a lint-free cloth or
soft brush to remove any dust or debris from both the filter cage
and the filter mesh.

Step 3
Do not use water to clean the filter mesh and avoid applying
too much pressure.

Step 4 Close-up of the

Rotate the filter cage back into position until correctly aligned. removable filter
Rotate clockwise to lock before use. cage at the bottom
of the hair dryer.
An arrow indicates
twisting to the
right to re-secure.