Transient Voltage Suppression Diodes

Surface Mount – 1500W > SMCJ series

SMCJ Series RoHS Pb e3

Uni-directional Description

The SMCJ series is designed specifically to protect

Bi-directional sensitive electronic equipment from voltage transients
induced by lightning and other transient voltage events.

Features

• 1500W peak pulse power • Fast response time:

capability at 10/1000μs typically less than 1.0ps
waveform, repetition rate from 0V to BV min
(duty cycles):0.01% • Glass passivated chip
• Excellent clamping junction
Agency Approvals capability • High temperature
AGENCY AGENCY FILE NUMBER • Low incremental surge to reflow soldering
resistance guaranteed: 260°C/40sec
E230531
• Typical IR less than 1μA • VBR @ TJ= VBR@25°C
when VBR min>12V x (1+αT x (TJ - 25))
Maximum Ratings and Thermal Characteristics (αT:Temperature
• For surface mounted
(TA=25OC unless otherwise noted) Coefficient, typical value
applications to optimize
board space is 0.1%)
Parameter Symbol Value Unit
• Low profile package • Plastic package is
Peak Pulse Power Dissipation at
• Built-in strain relief flammability rated V-0 per
TA=25ºC by 10/1000µs Waveform PPPM 1500 W
(Fig.2)(Note 1), (Note 2), (Note 5) Underwriters Laboratories
• Typical failure mode is
Power Dissipation on Infinite Heat short from over-specified • Meet MSL level1, per
PD 6.5 W J-STD-020, LF maximun
Sink at TL=50OC voltage or current
peak of 260°C
Peak Forward Surge Current, 8.3ms
IFSM 200 A
• Whisker test is conducted
Single Half Sine Wave (Note 3) based on JEDEC • Matte tin lead–free plated
Maximum Instantaneous Forward JESD201A per its table 4a • Halogen free and RoHS
Voltage at 100A for Unidirectional VF 3.5/5.0 V and 4c compliant
Only (Note 4)
• IEC-61000-4-2 ESD • Pb-free E3 means 2nd
Operating Temperature Range TJ -65 to 150 °C
30kV(Air), 30kV (Contact) level interconnect is
Storage Temperature Range TSTG -65 to 175 °C Pb-free and the terminal
• ESD protection of data
Typical Thermal Resistance Junction lines in accordance with finish material is tin(Sn)
RθJL 15 °C/W
(IPC/JEDEC J-STD-
to Lead IEC 61000-4-2
Typical Thermal Resistance Junction • EFT protection of data 609A.01)
RθJA 75 °C/W
to Ambient lines in accordance with
Notes: IEC 61000-4-4
1. Non-repetitive current pulse , per Fig. 4 and derated above TJ (initial) =25OC per Fig. 3.
2. Mounted on copper pad area of 0.31x0.31” (8.0 x 8.0mm) to each terminal.
Applications
3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional TVS devices are ideal for the protection of I/O Interfaces,
device only, duty cycle=4 per minute maximum.
VCC bus and other vulnerable circuits used in Telecom,
4. VF < 3.5V for single die parts and VF< 5.0V for stacked-die parts.
Computer, Industrial and Consumer electronic
5. The PPPM of stacked-die parts is 2000W and please contact littelfuse for the detail
stacked-die parts. applications.

Functional Diagram Additional Infomarion

Bi-directional
Datasheet Resources Samples

Cathode Anode

Uni-directional

© 2015 Littelfuse, Inc.

Specifications are subject to change without notice.
Revised: 11/20/15
This datasheet can be found on https://www.jotrin.com
 Transient Voltage Suppression Diodes
Surface Mount – 1500W > SMCJ series

Electrical Characteristics (T =25°C unless otherwise noted)

A

Reverse Breakdown Test Maximum Maximum Maximum

Agency
Part Part Marking Stand off Voltage VBR Current Clamping Peak Reverse
Approval
Number Number Voltage (Volts) @ IT Voltage VC Pulse Leakage IR
(Uni) (Bi) VR IT @ Ipp Current Ipp @ VR
UNI BI (Volts) MIN MAX (mA) (V) (A) (µA)
SMCJ5.0A SMCJ5.0CA GDE BDE 5.0 6.40 7.00 10 9.2 163.0 800 X
SMCJ6.0A SMCJ6.0CA GDG BDG 6.0 6.67 7.37 10 10.3 145.7 800 X
SMCJ6.5A SMCJ6.5CA GDK BDK 6.5 7.22 7.98 10 11.2 134.0 500 X
SMCJ7.0A SMCJ7.0CA GDM BDM 7.0 7.78 8.60 10 12.0 125.0 200 X
SMCJ7.5A SMCJ7.5CA GDP BDP 7.5 8.33 9.21 1 12.9 116.3 100 X
SMCJ8.0A SMCJ8.0CA GDR BDR 8.0 8.89 9.83 1 13.6 110.3 50 X
SMCJ8.5A SMCJ8.5CA GDT BDT 8.5 9.44 10.40 1 14.4 104.2 20 X
SMCJ9.0A SMCJ9.0CA GDV BDV 9.0 10.00 11.10 1 15.4 97.4 10 X
SMCJ10A SMCJ10CA GDX BDX 10.0 11.10 12.30 1 17.0 88.3 5 X
SMCJ11A SMCJ11CA GDZ BDZ 11.0 12.20 13.50 1 18.2 82.5 1 X
SMCJ12A SMCJ12CA GEE BEE 12.0 13.30 14.70 1 19.9 75.4 1 X
SMCJ13A SMCJ13CA GEG BEG 13.0 14.40 15.90 1 21.5 69.8 1 X
SMCJ14A SMCJ14CA GEK BEK 14.0 15.60 17.20 1 23.2 64.7 1 X
SMCJ15A SMCJ15CA GEM BEM 15.0 16.70 18.50 1 24.4 61.5 1 X
SMCJ16A SMCJ16CA GEP BEP 16.0 17.80 19.70 1 26.0 57.7 1 X
SMCJ17A SMCJ17CA GER BER 17.0 18.90 20.90 1 27.6 54.4 1 X
SMCJ18A SMCJ18CA GET BET 18.0 20.00 22.10 1 29.2 51.4 1 X
SMCJ20A SMCJ20CA GEV BEV 20.0 22.20 24.50 1 32.4 46.3 1 X
SMCJ22A SMCJ22CA GEX BEX 22.0 24.40 26.90 1 35.5 42.3 1 X
SMCJ24A SMCJ24CA GEZ BEZ 24.0 26.70 29.50 1 38.9 38.6 1 X
SMCJ26A SMCJ26CA GFE BFE 26.0 28.90 31.90 1 42.1 35.7 1 X
SMCJ28A SMCJ28CA GFG BFG 28.0 31.10 34.40 1 45.4 33.1 1 X
SMCJ30A SMCJ30CA GFK BFK 30.0 33.30 36.80 1 48.4 31.0 1 X
SMCJ33A SMCJ33CA GFM BFM 33.0 36.70 40.60 1 53.3 28.2 1 X
SMCJ36A SMCJ36CA GFP BFP 36.0 40.00 44.20 1 58.1 25.9 1 X
SMCJ40A SMCJ40CA GFR BFR 40.0 44.40 49.10 1 64.5 23.3 1 X
SMCJ43A SMCJ43CA GFT BFT 43.0 47.80 52.80 1 69.4 21.7 1 X
SMCJ45A SMCJ45CA GFV BFV 45.0 50.00 55.30 1 72.7 20.6 1 X
SMCJ48A SMCJ48CA GFX BFX 48.0 53.30 58.90 1 77.4 19.4 1 X
SMCJ51A SMCJ51CA GFZ BFZ 51.0 56.70 62.70 1 82.4 18.2 1 X
SMCJ54A SMCJ54CA GGE BGE 54.0 60.00 66.30 1 87.1 17.3 1 X
SMCJ58A SMCJ58CA GGG BGG 58.0 64.40 71.20 1 93.6 16.1 1 X
SMCJ60A SMCJ60CA GGK BGK 60.0 66.70 73.70 1 96.8 15.5 1 X
SMCJ64A SMCJ64CA GGM BGM 64.0 71.10 78.60 1 103.0 14.6 1 X
SMCJ70A SMCJ70CA GGP BGP 70.0 77.80 86.00 1 113.0 13.3 1 X
SMCJ75A SMCJ75CA GGR BGR 75.0 83.30 92.10 1 121.0 12.4 1 X
SMCJ78A SMCJ78CA GGT BGT 78.0 86.70 95.80 1 126.0 11.9 1 X
SMCJ85A SMCJ85CA GGV BGV 85.0 94.40 104.00 1 137.0 11.0 1 X
SMCJ90A SMCJ90CA GGX BGX 90.0 100.00 111.00 1 146.0 10.3 1 X
SMCJ100A SMCJ100CA GGZ BGZ 100.0 111.00 123.00 1 162.0 9.3 1 X
SMCJ110A SMCJ110CA GHE BHE 110.0 122.00 135.00 1 177.0 8.5 1 X
SMCJ120A SMCJ120CA GHG BHG 120.0 133.00 147.00 1 193.0 7.8 1 X
SMCJ130A SMCJ130CA GHK BHK 130.0 144.00 159.00 1 209.0 7.2 1 X
SMCJ150A SMCJ150CA GHM BHM 150.0 167.00 185.00 1 243.0 6.2 1 X
SMCJ160A SMCJ160CA GHP BHP 160.0 178.00 197.00 1 259.0 5.8 1 X
SMCJ170A SMCJ170CA GHR BHR 170.0 189.00 209.00 1 275.0 5.5 1 X
SMCJ180A SMCJ180CA GHT BHT 180.0 201.00 222.00 1 292.0 5.1 1 X
SMCJ200A SMCJ200CA GHV BHV 200.0 224.00 247.00 1 324.0 4.6 1 X
SMCJ220A SMCJ220CA GHX BHX 220.0 246.00 272.00 1 356.0 4.2 1 X
SMCJ250A SMCJ250CA GHZ BHZ 250.0 279.00 309.00 1 405.0 3.7 1 X
SMCJ300A SMCJ300CA GJE BJE 300.0 335.00 371.00 1 486.0 3.1 1 X
SMCJ350A SMCJ350CA GJG BJG 350.0 391.00 432.00 1 567.0 2.6 1 X
SMCJ400A SMCJ400CA GJK BJK 400.0 447.00 494.00 1 648.0 2.3 1 X
SMCJ440A SMCJ440CA GJM BJM 440.0 492.00 543.00 1 713.0 2.1 1 X
For bidirectional type having VR of 10 volts and less, the IR limit is double.
For parts without A , the VBR is ± 10% and VC is 5% higher than with A parts

© 2015 Littelfuse, Inc.

Specifications are subject to change without notice.
Revised: 11/20/15
Transient Voltage Suppression Diodes
Surface Mount – 1500W > SMCJ series

I-V Curve Characteristics

Uni-directional Bi-directional
Ipp

IT
Vc VBR VR IR
Vc VBR VR V
V IR VR VBR Vc
IR VF IT
IT

Ipp
Ipp

PPPM Peak Pulse Power Dissipation -- Max power dissipation

VR Stand-off Voltage -- Maximum voltage that can be applied to the TVS without operation
VBR Breakdown Voltage -- Maximum voltage that flows though the TVS at a specified test current (IT)
VC Clamping Voltage -- Peak voltage measured across the TVS at a specified Ippm (peak impulse current)
IR Reverse Leakage Current -- Current measured at VR
VF Forward Voltage Drop for Uni-directional

Ratings and Characteristic Curves (T =25°C unless otherwise noted)

A

Figure 1 - TVS Transients Clamping Waveform Figure 2 - Peak Pulse Power Rating

Voltage Transients 100

PPPM-Peak Pulse Power (kW)

TJ initial = Tamb

stacked-die, 2kW
Voltage Across TVS 10 at 10x1000µs, 25°C
Voltage or Current

Current Through TVS

Single die, 1.5kW
1 at 10x1000µs, 25°C

0.1
0.001 0.01 0.1 1 10

td-Pulse Width (ms)

Time

continues on next page.

© 2015 Littelfuse, Inc.

Specifications are subject to change without notice.
Revised: 11/20/15
 Transient Voltage Suppression Diodes
Surface Mount – 1500W > SMCJ series

Ratings and Characteristic Curves (T =25°C unless otherwise noted) (Continued) A

Figure 3 - Peak Pulse Power Derating Curve Figure 4 - Pulse Waveform

100 150
Peak Pulse Power (PPP) or Current (IPP)

tr=10µsec TJ=25°C

IPPM- Peak Pulse Current, % IRSM

Pulse Width(td) is defined
as the point where the peak
80
Derating in Percentage %

current decays to 50% of IPPM

Peak Value
100 IPPM
60
Half Value

40
IPPM IPPM ( )2

50 10/1000µsec. Waveform
as defined by R.E.A
20

td
0
0
0 25 50 75 100 125 150 175 0 1.0 2.0 3.0 4.0
TJ - Initial Junction Temperature (ºC) t-Time (ms)

Figure 5 - Typical Junction Capacitance Figure 6 - Typical Transient Thermal Impedance

100
100000
Transient Thermal Impedance (°C/W)

Uni-directional V=0V
10000 10
Bi-directional V=0V
Cj(pF)

1000
Uni-directional V=VR
1

100

0.1
Bi-directional V=VR
10

0.01
1
1 10 100 1000 0.001 0.01 0.1 1 10 100 1000
VBR - Reverse Breakdown Voltage(V) TP - Pulse Duration (s)

Figure 7 - Maximum Non-Repetitive Peak Forward Figure 8 - Peak Forward Voltage Drop vs Peak Forward
Surge Current Uni-Directional Only Current (Typical Values)

200 100.0
IFSM - Peak Forward Surge Current (A)

180 Single die

IF- Peak Forward Current(A)

160
Stacked-die
140
10.0
120
100
80
60 1.0

40
20
0
0.1
1 10 100 0.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0
Number of Cycles at 60 Hz VF-Peak Forward Voltage(V)

© 2015 Littelfuse, Inc.

Specifications are subject to change without notice.
Revised: 11/20/15
Transient Voltage Suppression Diodes
Surface Mount – 1500W > SMCJ series

Soldering Parameters

Lead–free
Reflow Condition
assembly tp
TP
- Temperature Min (Ts(min)) 150°C Ramp-up Critical Zone
TL to TP
Pre Heat - Temperature Max (Ts(max)) 200°C TL tL

Temperature (T)
- Time (min to max) (ts) 60 – 180 secs Ts(max)

Average ramp up rate (Liquidus Temp (TA)

3°C/second max Ts(min)
Ramp-down
to peak ts
Preheat
TS(max) to TA - Ramp-up Rate 3°C/second max
- Temperature (TA) (Liquidus) 217°C
Reflow 25˚C
t 25˚C to Peak
- Time (min to max) (ts) 60 – 150 seconds
Time (t)
Peak Temperature (TP) 260 +0/-5
°C
Time within 5°C of actual peak
20 – 40 seconds
Temperature (tp)
Ramp-down Rate 6°C/second max
Environmental Specifications
Time 25°C to peak Temperature (TP) 8 minutes Max.
Do not exceed 260°C
High Temp. Storage JESD22-A103
Physical Specifications
HTRB JESD22-A108

Weight 0.007 ounce, 0.21 grams

Temperature Cycling JESD22-A104
JEDEC DO214AB. Molded plastic body
Case
over glass passivated junction
MSL JEDEC-J-STD-020, Level 1
Color band denotes positive end
Polarity
(cathode) except Bidirectional. H3TRB JESD22-A101

Matte Tin-plated leads, Solderable per

Terminal RSH JESD22-A111
JESD22-B102

Dimensions
DO-214AB (SMC J-Bend)
Cathode Band Inches Millimeters
(for Uni-directional products only) Dimensions
Min Max Min Max
A 0.114 0.126 2.900 3.200
A C
B 0.260 0.280 6.600 7.110
C 0.220 0.245 5.590 6.220
B D 0.079 0.103 2.060 2.620
E 0.030 0.060 0.760 1.520
H
F - 0.008 - 0.203
D
G 0.305 0.320 7.750 8.130
H 0.006 0.012 0.152 0.305
F
E G I 0.129 - 3.300 -

J K L J 0.094 - 2.400 -
K - 0.165 - 4.200
I L 0.094 - 2.400 -

Solder Pads
(all dimensions in mm)

© 2015 Littelfuse, Inc.

Specifications are subject to change without notice.
Revised: 11/20/15
 Transient Voltage Suppression Diodes
Surface Mount – 1500W > SMCJ series

Part Numbering System Part Marking System

SMCJ XXX C A

Cathode Band
(for Uni-directional products only)

F
5% VBR VOLTAGE TOLERANCE
Littelfuse Logo
BI-DIRECTIONAL

VR VOLTAGE
SERIES
XXX
YMXXX
Marking Code

Trace Code Marking

Y:Year Code
M: Month Code
XXX: Lot Code

Packaging

Component Packaging Packaging

Part number Quantity
Package Option Specification

SMCJxxxXX DO-214AB 3000 Tape & Reel - 16mm tape/13” reel EIA STD RS-481

Tape and Reel Specification

0.157
(4.0)

0.63
(16.0)
Cathode

0.315 0.059 DIA Cover tape

(8.0) (1.5)

13.0 (330)
Dimensions are in inches
0.80 (20.2) (and millimeters).
Arbor Hole Dia.

Direction of Feed
0.65
(16.4)

© 2015 Littelfuse, Inc.

Specifications are subject to change without notice.
Revised: 11/20/15