Scribd
Upload
130 views3 pages

Assetguard PDM Gateway

Uploaded by

mathieu laupretre
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
130 views3 pages

Assetguard PDM Gateway

Uploaded by

mathieu laupretre
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Assetguard

PDM

siemens-energy.com/t-service

Introduction allows to quickly localize and qualify those alarms. Further-


more, the alarms are easily forwarded to Siemens Energy
Most failures at GIS are in coincidence with partial dis-
Customer Support Center for expert involvement.
charge from an early stage of the particular failure. Detect-
ing and analyzing those partial discharges via the emitted The web-based user interface presents its information, in-
UHF signals is the method of choice for failure detection in cluding live data and diagnostic results simultaneously for
gas-insulated switchgear. various users on different locations even on mobile de-
vices.
Siemens Energy Assetguard PDM is a highly accurate online
condition monitoring system for GIS, analyzing the UHF Partial Discharge experts can use the built-in user interface
signals for severity and type of fault, providing a compre- features to assess historical data. This data can also be ex-
hensive early warning system for GIS failures and is compli- ported and provided to a remote expert from Siemens En-
ant with “IEC TS 62478: High Voltage Test Techniques – ergy for asset condition reports or on-site condition assess-
Measurements of partial discharges by electromagnetic ments.
and acoustic methods”.
Benefits
Features
• Early warning in case of evolving dielectric failure
Assetguard PDM is a modular system to cover all sizes and
manufacturers of GIS substation. It can be operated with • Expert system that gives diagnostic of reason for partial
internal and external UHF sensors, has superior qualities re- discharge sources
garding environmental, electro-magnetic and ingress pro- • Avoidance of unplanned outages and support of mainte-
tection - so is perfect for retrofit or new switchgear, indoor nance planning
or outdoor installation. • Facilitate integration (e.g., in SCADA Systems or Asset
Assetguard PDM performs the UHF signal analysis in terms Management Platforms) and usability in current utilities
of observing the intensity as well as providing diagnostic networks
results regarding the source of partial discharge by usage • Easy involvement of Siemens Energy Customer Support
of the built-in neural network for pattern recognition • Seamless combination with Assetguard products for gas
Besides alarming using state-of-the-art communication pro- density and circuit breaker monitoring
tocols, an individual and interactive single-line diagram

© 2021 Siemens Energy Page 1


Scope of Work / Deliverables
• Optional external UHF sensors for retrofit installations
• Assetguard PDM field devices for signal acquisition
• Assetguard Gateway to integrate the data from the
PDM field devices and optional gas density or circuit
breaker field devices
• Web based user interface
• Central cubicle containing Assetguard Gateway and
further needed network and communication
components

Architecture

© 2021 Siemens Energy Page 2


Specification

Acquisition Field Device

UHF Detection -85dBm Input Channels 3 or 6 PD UHF channels plus 1


Sensitivity noise detection input

Dynamic Range 60dBm typical Enclosure Dimensions 400 x 300 x 225 mm

Frequency Re- 145 to 1700 MHz, selection Gain Environmental Conditions 25oC to +55 oC, 93% RH
sponse and Filter Bands

Acquisition 12-bit A/D @ 5kS/s Shock Resistance Vibration (1g) Shock (15g)

PD Expert Analysis Neural Network with pattern EMC Standards IEC 61000-6-5
recognition

Noise Management Noise cancellation and Noise Ingress Protection Rating IP54 or higher
Pattern recognition

Gateway

IEC 61850, DNP3, Volt-Free Contact, API, Min. 2year data storage, Web based UI

Published by © 2021 Siemens Energy


Transmission Service
Humboldtstr. 64
90459 Nuremberg, Germany

Customer Support Center


Phone: +49 911 6505 6505
E-Mail: [email protected]

For more information, please visit our website:

siemens-energy.com/t-service

“Subject to changes and errors. The information given in this docu-


ment only contains general descriptions and/or performance features
which may not always specifically reflect those described, or which
may undergo modification in the course of further development of the
pro-ducts. The requested performance features are binding only when
they are expressly agreed upon in the concluded contract.”

Siemens Energy is a trademark licensed by Siemens AG.

© 2021 Siemens Energy Page 3

You might also like