ZS895 SPECIFICATION SHEET

12 [305] WIDE REVEAL TRENCH DRAIN SYSTEM W/ “V”

BOTTOM TAG ________

Design and Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice

SPECIFYING ENGINEER IS RESPONSIBLE FOR

CONCRETE ENCASEMENT AND REINFORCING
BASED UPON APPLICATION AND LOCAL CODES

5
1416 [364]
11 21 [295]
4 [102] MIN.
981 [232] 96 [2438]

INVERT 'A' 'B'

4 [102] MIN.

ENGINEERING SPECIFICATION: Zurn ZS895

Channels shall be 96” [2438mm] long, 12” [305mm] wide and have a 9-1/8” [232mm] throat. Modular channel sections shall be made of 12ga. fabricated
Stainless Steel conforming to ASTM A-240 (type 304). Channels have 10 ga. bolted, flanged connection between channel sections that will not separate during
the installation, gaskets available. Channels shall weigh less than 4.15 lbs.[1.05kg] per linear foot, have a smooth, 1-1/2” [38mm] radiused self cleaning bottom
with a Manning’s coefficient of .009 and 1.04% or neutral 0% built in slope. Channels shall have feet for patty pour or leveling studs standard to secure trench in
its final location. Shall be provided with standard FS grates that lock down to frame. Zurn 12” [305 mm] wide reveal Fabricated Stainless Steel Grate conforming
to ASTM specification A-240, (type 304), is rated class A per the DIN EN1433 top load classification. Supplied in 24” [610mm] nominal lengths with 5/16” [8mm]
wide slots, and 1-1/4” [32mm] bearing depth. Grate has an open area of 25.61 sq. in per ft. [542.09 sq. cm per meter]. Channels shall be produced in the U.S.A.

PREFIXES OPTIONS (Check/specify appropriate options) Dimension in Inches [mm] Flow

____ ZS Eight-foot, “V” Bottom, Type 304 Stainless Steel* Trench (ZS profile only)
No.* ‘A’ ‘B’
SUFFIXES OPTIONS (Check/specify appropriate options) Shallow Inv. Deep Inv (cfs) (gpm) (lps)
Outlet Adapters Add/Each
S89501 6.00 [152.4] 7.00 [177.8] 1.286 577 36
____ -E1 Closed End Cap ____ -U4 4 [102] No-Hub Bottom Outlet
____ -E4 4 [102] No-Hub End Outlet ____ -U6 6 [152] No-Hub Bottom Outlet S89502 7.00 [177.8] 8.00 [203.2] 2.324 1043 66
____ -E6 6 [152] No-Hub End Outlet ____ -U8 8 [203] No-Hub Bottom Outlet S89503 8.00 [203.2] 9.00 [228.6] 2.705 1214 77
____ -E8 8 [203] No-Hub End Outlet S89504 9.00 [228.6] 10.00 [254] 3.095 1389 88
S89505 10.00 [254] 11.00 [279.4] 3.487 1565 99
GRATE OPTIONS (Load Classifications are per DIN EN1433)
S89506 11.00 [279.4] 12.00 [304.8] 3.886 1744 110
____ -BDC Black Acid Resistant Epoxy Coated Ductile Grate - Class C
____ -BDE Black Acid Resistant Epoxy Coated Ductile Grate - Class E S89507 12.00 [304.8] 13.00 [330.2] 4.289 1925 121
____ -BDF Black Acid Resistant Ductile Grate - Class F S89508 13.00 [330.2] 14.00 [355.6] 4.692 2106 126
____ -DC Ductile Iron Solid Cover - Class C S89509 14.00 [355.6] 15.00 [381] 5.102 2290 133
____ -DGC Ductile Iron Slotted Grate - Class C S89510 15.00 [381] 16.00 [406.4] 5.512 2474 156
____ -DGE Ductile Iron Slotted Grate - Class E
S89511 16.00 [406.4] 17.00 [431.8] 5.924 2659 168
____ -DGF Ductile Iron Slotted Grate - Class F
____ -HPD Heel-Proof Ductile Slotted Grate - Class C S89512 17.00 [431.8] 18.00 [457.2] 6.341 2846 180
____ -HPDE Heel-Proof Ductile Slotted Grate - Class E
*All channels include a neutral option. neutral channels use the deep
____ -RFSC Reinforced Slotted Stainless Steel Grate - Class C
invert of its channel number.
____ -RPSC Reinforced Perforated Stainless Steel Grate - Class C
EX: S89503N has an invert of 9.00 [228.6]
____ -RPSRC Reinforced Perforated Stainless Steel Reversed Punch Grate

MADE in the U.S.A. MADE in the U.S.A. Miscellaneous Options

____ -ADA-USA Meets Americans with Disabilities Act Requirements - Class C ____ -DB Bottom Dome Strainer
____ -DGC-USA Ductile Iron Slotted Grate - Class C ____ -K Anchor Flange
____ -DGE-USA Ductile Iron Slotted Grate - Class E ____ -KC Clamp Collar and Pan
____ -FS Fabricated Stainless Steel Slotted Grate - Class A* ____ -W Single Piece of Welded Trench
____ -GG Fiberglass Grate - Class A
____ -HPDE-USA Heel-Proof Ductile Slotted Grate - Class E Miscellaneous Options
____ -PS Perforated Stainless Steel Grate - Class A ____ -VP Vandal-Proof Lockdown
____ -SBG-L Stainless Steel Bar Grate - Class C
____ -SBGS Serrated Stainless Steel Bar Grate CUSTOM - Class C

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

ADVERTENCIA: Cáncer y daño reproductivo - www.P65Warnings.ca.gov
AVERTISSEMENT: Cancer et effets néfastes sur la reproduction - www.P65Warnings.ca.gov * Regularly furnished unless otherwise specified
Zurn Industries, LLC | Flo-Thru Division Rev. A
1801 Pittsburgh Avenue, Erie, PA 16502, Ph. 855.663.9876
Date: 02/24/2022
In Canada | Zurn Industries Limited C.N. No. 144326
7900 Goreway Drive, Unit 10, Brampton, Ontario L6T 5W6, Ph. 877.892.5216
Prod. | Dwg. No. ZS895
www.zurn.com