DATA SHEET

LinkRunner® 10G
Advanced 10Gig Ethernet Tester
Overview
Introducing the new LinkRunner 10G, the most cost-effective solution for 10 Gig network
testing. LinkRunner 10G simplifies testing and configuration of copper and fiber Ethernet
networks, streamlining workflows by combining essential functions of installation and triage
in a single, ruggedized unit.
This next-generation Android-based tester delivers complete network validation, qualification
and troubleshooting, from the media (copper/fiber) to the application (layers 1-7),
accelerating deployments, speeding problem identification, and improving the efficiency and
effectiveness of network installers and operations teams.
• Install, test, verify, and troubleshoot technology upgrades, Multi-Gig (NBASE-T) and 10G
networks with advanced AndroidTM-based troubleshooting apps and purpose-built test
hardware
• Physical layer testing includes cable (TDR) testing, toning, wiremapping, and
LANBERT™ Media Qualification testing with cable SNR (Signal-to-Noise Ratio)
measurements for Multi-Gig links
• Compatibility with standards compliant SFPs enables Cost-Effective, Line-Rate
test and validation of any wired media (copper or fiber 10Gig Ethernet Testing
for a variety of use models
• Validate up to 90W 802.3bt PSE with TruePower™ loaded Power over Ethernet (PoE) test
• Serves as a peer to the EtherScope® nXG for line-rate performance testing to verify network
capacity, performance and QoS, as well as service provider SLAs between sites

Key Features
Flexible Platform for a Variety of Testing Needs
The LinkRunner 10G has two Ethernet ports. The main test RJ-45 port supports Multi-Gig networks Main Ethernet Test
from 10/100/1000Mbps to 2.5/5/10G to verify link speed, SNR, and duplex advertised and connected. Ports (RJ-45 & SFP)
It can request and verify PoE power under load from up to 90W PSE’s. Alternatively, it can interface to
fiber networks via single/multi-mode SFP+ to test 1/10Gbps fiber-based Ethernet. The second RJ-45
management port connects to 10/100/1000Mbps Ethernet for remote control, and conducts network USB-A
scanning and tests where needed. It is also the port for cable testing.
In addition to fiber optic transceivers (SX, LX, SR, LR, ZX, singlemode, multimode, etc.) the SFP+ slot can
be utilized with a variety of standards-based interfaces, such as TwinAx or other Direct Attach Copper
(DAC) cables, and vendor-specific transceivers.
Cable Test &
As an Android-based device, LinkRunner 10G can use a variety of apps from the Link-Live app store Management
for a variety of uses. The USB-A port provides connectivity for added USB adapters and third-party Ports
accessories such as printers, barcode scanners, fiber optic inspection cameras, and more. The use of a
USB-based Wi-Fi adapter (such as the Edimax AC1200 for 802.11ac/b/g/n/) provides for connectivity and
wireless testing using a third-party app. USB-C

The USB-C port is compatible with higher-power USB-C chargers, as well as external power-packs for
all-day portable use.

Android is a trademark of Google LLC

1
 Simplifies tasks and empowers technicians to verify
complex networks with next generation AutoTest
The LinkRunner 10G has out-of-the-box AutoTest profiles with best practice
pass/fail thresholds for quick assessment of network configurations and
services providing over 45 discreet test results/measurements in seconds.
AutoTest Element Configurations include:
• Switch port PoE validation up to 90W from PSE and TruePower™ load
testing
• 802.1x authentication
• Link speed/duplex advertised vs. actual, Multi-Gig link SNR measurement
• VLAN Tagged traffic detection & monitoring NBASE-T switch network Add & customize
• Switch port identification with interface stats, connected devices and with VLAN and 802.1x profiles for
authentication standardized testing
drill-down
• DHCP availability, response time, automatic detection of 2nd DHCP offer,
and connect log
• DNS lookup (forward/reverse) availability and response time
• Gateway availability and response time
• Active connection test targets (Ping or TCP Connect)
• End-user response time measurement via HTTP

Multiple profiles can be created for complex networks with multiple VLANs
supported per switch port, each with its own set of IP targets. These can then
be organized into profile groups that execute each test against each profile in
sequence. The result is that multiple VLANs can be verified and documented
in one go. Since the pre-defined profiles can be executed individually, the
profiles group serves as a resource for technicians to verify each specific VLAN Test profiles enable HTTP test reveals cloud/
during troubleshooting. With profile groups, engineers can transfer their comprehensive, consistent web-based services
infrastructure testing response times
network configuration and test knowledge to technicians, saving training time
and effort.

Multi-Gig Link Validation

With the expanding deployment of Multi-Gig switching (typically to feed
greater bandwidth to Wi-Fi 6 access points), users are finding that their
cable plant may not support the desired speed. Cable quality, length,
installation workmanship, and noise in the environment all can contribute to
“downshifting” to lower-than-expected speeds.

• Cabling SNR Measurement – LinkRunner 10G can now verify copper media
for Multi-Gig capability (1 / 2.5 / 5 / 10Gig), and provide root cause diagnosis
when link speed downshifting occurs.

24-Hour Monitoring for Intermittent Issues Cabling SNR Periodic AutoTest

measurement validates enables monitoring
Periodic AutoTest: In this mode, AutoTest runs at specified intervals (from Multi-Gig links infrastructure for
1 minute to 24 hours) and sends the results to Link-Live to view the results intermittent issues
over time. This is an effective way to “monitor” aspects of your network for
an extended period, or to help diagnose intermittent issues without having to
manually execute multiple tests. Results are automatically timestamped and
can be prefixed with a user-entered comment for grouping or organization.
Test results can be quickly analyzed in Link-Live using the filtering and sorting
functions. Email notifications can warn you when errors are found.

2
 1
 0G copper/fiber wired performance tests for
critical links and key devices
The LinkRunner 10G works as a test peer with the EtherScope nXG Network
Performance Test (NPT) to stress critical network links, such as switch ports
to servers/storage/Wi-Fi access points, uplinks or WAN links, with up to
four simultaneous data streams at up to 10G line-rate. It verifies the link’s
compliance to service level agreements (SLA) based on throughput, packet
loss, QoS, delay and jitter.
This performance test can be run at up to full line-rate in order to measure
the top-end bandwidth and quality of your network from end-to-end, or for
particular network segments. It can also be utilized to bench-test switches for Performance test with Frame loss, jitter, and
optimal configuration prior to rollout into production. For troubleshooting up to 4 streams and 4 latency charted
on a production network (where excessive test traffic could be detrimental), end points
many users will configure the NPT feature with a low stream of traffic (even
just 128Kbps) in order to characterize network quality, identify possible packet
loss, delay and jitter, and validate QoS.
Settings for data streams and thresholds for VoIP or video service can be
stored and recalled where needed, saving configuration time.
For key servers/services in the cloud or Internet, engineers can pre-define tests
and thresholds to verify their connectivity and performance using ping, TCP
connect, HTTP, or FTP. Continuous testing with response time measurements
is available to verify consistency and identify intermittent issues. These tests
can be easily recalled by field technicians to reduce configuration time or
mistakes, to get more done faster.

iPerf throughput test with HTTP test against a

Performance Test Relationships - EtherScope PEERS bi-directional
PEERS bi-directional webserver with end-user-
nXG can conduct performance tests through PEERS bi-directional TCP or UDP frames
various end-points response-time analysis
LINE LINE
RATERATELINE RATE
TESTTEST TEST

PEERS bi-directional
Ethernet Ethernet
Ethernet
EtherScope nXG
EtherScope nXG OneTouch™ OptiView® XG OneTouch™ OptiView® XG
EtherScope™ nXG LinkRunner® 10G OptiView® XG
REFLECTORS round-trip
REFLECTORS round-trip
REFLECTORS round-trip
Windows-based
LinkRunner® AT LinkRunner G2 TCP Connect Test -TCP
Software Agent

EtherScope nXG
Windows-based
Software Agent
LinkRunner® AT LinkRunner G2 Connect Test showing
EtherScope nXG
response time over time
IPERF TEST
Windows-based (up to last 24-hours)
Wi-Fi/Ethernet LinkRunner® AT Test
LinkRunner® G2
IPERF TEST
Software Agent Accessory

Wi-Fi/Ethernet Test Accessory

IPERF TEST
EtherScope nXG
EtherScope™ nXG Wi-Fi/EthernetOptiView® XG
OneTouch™ Test Accessory

REFLECTORS round-trip
List of Problems Automatically Detected by LinkRunner 10G Discovery Enabled

Bad Subnet Mask High Interface Utilization* High Disk Utilization*

Duplicate IP Address High Interface Errors* High Memory Utilization*

DHCP Server Not Responding High FCS Errors* Recent Device Reboot*

LinkRunner 10G Received Used IP from DHCP High Packet Discards* Spanning Tree Topology Change
Windows-based SNMPv3 Agent Responded
LinkRunner®
LinkRunner 10G Lost DHCP Lease AT Detected
LinkRunner G2 Interfaces
Half-Duplex
to SNMPv1/v2 Query
Software Agent
Max Clients on SSID High CPU Utilization*

*Problems detected wither user-definable threshold

3
 L
 ANBERT™ Media Qualification App
Your copper and fiber cable plant serves as the foundation of your network. But do
you know whether it is of sufficient quality to provide the bandwidth required? With
the insatiable growth in bandwidth, increasing speeds of Wi-Fi APs (with Multi-Gig
2.5/5Gbps backhauls), 1Gbps to 10Gbps upgrades, and deploying new fiber links, network
professionals must have confidence that their network will transport that data error-free
at the maximum speed possible. Downtime or intermittent loss and errors is simply not an
option.

The quality of components and workmanship of installation is critical, but typical cable
certification testers can be very expensive, single-purpose tools – making them cost-
prohibitive for many installers and end-users. The new LANBERT media qualification app
for NetAlly’s multi-function professional instruments provides a simple and fast method of
assessing the quality of transmission and available bandwidth.

LANBERT generates and measures the transmission of line rate Ethernet frames over
your network cabling infrastructure, qualifying its ability to support 1G/10G on fiber and
100M/1G/2.5G/5G/10G on copper links.

Key Features
- Maximize utilization of your existing cable plant
- Qualify copper cable bandwidth for 2.5 / 5 / 10Gbps
- Validate 1Gbps/10Gbps fiber optic cabling and components
- Identify maximum error-free throughput

Running the LANBERT test using the EtherScope® nXG and/or LinkRunner® 10G as
endpoints over a long duration (up to 24 hours) serves as a “soak test” to identify the
presence of intermittent issues and noise events that can corrupt network traffic. With
easy-to-read trend graphs and the ability to drill down to 1-second granularity, LANBERT
helps you identify exactly when errors occur.
Poor quality components and/or installation workmanship can result in links that are
susceptible to noise, whether induced from within cable bundles or from outside events
such as electrostatic discharges (ESD), crosstalk, or electromagnetic (EMF) pulses caused
by motors or other machinery. This can cause not only bit errors and frame loss but may
prevent certain technologies (Multi-Gig) from linking at the designated speed causing a
downshift to the next lower rate.
But beware of other testers offering similar capabilities! Standard Layer 2-only Ethernet
access link testing will not validate layer-3 enterprise switches and routers. Because it does
not test the IP (Internet Protocol) layer, this methodology cannot pass through Layer 3
devices. Thankfully, NetAlly’s multifunction tools also feature the Layer 3 line-rate Network
Performance Test app, that can transmit and test across your entire network infrastructure
end-to-end – not just one access link and switch. It also includes up to 4 streams with
individual L2 and L3 QoS and VLAN controls, essential capabilities for truly understanding
the capacity and quality of packet transmission
The LANBERT app generates a stream of Ethernet frames onto a copper or fiber link which
are redirected back to the EtherScope using one of three methods:
1) Single tester with physical loopback (for fiber, using a jumper between Tx and Rx; for
twisted-pair cabling using an RJ-45 loopback connector – limited to 100Mbps)
2) Single tester with active remote loopback (switch port configured in loopback mode, or
reflector test instrument (such as LinkRunner G2, for up to 1Gbps)
3) Dual tester, one in Generator mode, the other in Loopback mode, using two EtherScope
nXG units, two LinkRunner 10G units, or one of each (up to 10Gbps copper or fiber
testing.)

4
Additional Troubleshooting Tools
Packet Capture: You can capture up to 10G line-rate to create a PCAP file of up
to 1Gigabyte. Packet slicing and filtering are supported, and PCAP files can be
uploaded to the Link-Live Cloud Service for easy sharing.
Cable Test: determine length, shorts, and split pairs and locate opens on UTP
cable. Verify the wiremap of UTP and ScTP cable with a WireView adapter.
It can generate either analog tone or the unique digital tone for the Fluke
Networks® IntelliTone™ Probe for quick cable tracing.
Android Apps: Users can download apps from the Link-Live app store to
accomplish many tasks in addition to testing.

Configuration Tools, such as a browser, Cable test with

are available to conduct Wiremap detecting
Examples of Android Testing device level investigation distance to fault,
apps available including cable shield
to download to Documentation
LinkRunner 10G
Collaboration

Automated Test Results Management

Serving as a centralized test results and device management system, the free
Link-Live cloud service transforms team workflows with the ability to quickly
and easily log, document, and report test activity from all LinkSprinter®,
LinkRunner AT, LinkRunner G2, LinkRunner 10G, AirCheck™ G2 handheld
network testers.
Once the instrument is connected to the Link-Live Cloud service, your test
results are automatically uploaded to the dashboard for project management
and reporting. You have the option of uploading additional files, screenshots,
images, profiles, packet captures, location information, and comments
Simplify report generation across media types for
anytime. Also, certain NetAlly instruments with AllyCare Support can receive network deployment documentation
firmware updates “over the network” from Link-Live as they become available.
An API is available to retrieve and integrate data from Link-Live into other
management platforms, such as your trouble-ticket application or network
management system. This gives you the ability to easily provide proof-of-
performance and better manage jobs and staff efficiency.
This unified dashboard of both wired and Wi-Fi network connectivity results
enables you to:
• Reduce results management overhead for multiple testers and users
• Enables seamless collaboration between site personnel and remote experts
• Attach photos, user comments to each result, adding context for future
changes and troubleshooting
• For asset management, ability to associate serial numbers of installed
devices, and/or cable/walljack label to specific test results

Wi-Fi Network Visibility

With the use of a USB-A based Wi-Fi adapter (such as the Edimax AC1200 for Third-party apps, such
802.11ac/b/g/n) provides for connectivity and wireless testing using a third- as Wi-Fi Analyzer, can be
party apps, available for download from the Link-Live app store. While not used for WLAN visibility.
nearly as powerful as the tools available in EtherScope nXG or AirCheck G2,
this capability provides an essential level of visibility where needed. Note,
other than the upload/attachment of screen captures, there is no integration
from third-party apps with Link-Live. Information collected from these apps
cannot be saved to Link-Live (another reason to utilize EtherScope nXG or
AirCheck G2 for Wi-Fi troubleshooting.) 5
 AllyCare-Enabled Features Deliver Advanced Troubleshooting Capabilities
The following features below are only available to customers with AllyCare support on their
PRODUCT SUPPORT LinkRunner 10G. Visit support.netally.com/allycare/

Discovery – Know who and what is on your network

The LinkRunner 10G discovery app automatically discovers your network
immediately upon power-up. The discovery provides quick security and health
audits of the network devices across multiple VLANs and subnets.
Device detail showing
Devices are classified and correlated to provide complete visibility of their VLAN, interfaces, uptime,
name, network addresses, VLAN, SSID, device type, and where available, & more with drill-down
traffic statistics. Engineers can name and set authorization status for devices
discovered. Discovery results can be directly uploaded to the complimentary
Link-Live Cloud Service for storage, conduct detailed analysis of devices
discovered with filter and sort tools, or export to CSV/PDF files as documentation.

LinkRunner’s discovery can be enriched by accessing SNMP MIBs of infrastructure

devices. It shows details such as device configuration summary, interface
configuration and traffic detail, SSIDs supported by WLAN Controllers, and
devices directly connected to switches. Community strings entered are
concealed from view.

Discover possible security risks caused by users and others: 2nd DHCP offers Interface traffic
statistics - correlated
indicating possible rogue servers, unknown switches granting access to multiple for 24 hours to detect
devices. intermittent events

The LinkRunner 10G’s discovery automatically detects problems. It

shows possible cause(s) for each problem detected, and it has integrated
troubleshooting tools to investigate further to get to root cause.

Switch Management
Drill into switch interfaces via SNMP for additional diagnostics, including trend
graphs on utilization, errors, discards, half-duplex (HDX), RSTP, and recent
reboots.

Path Analysis Path Analysis shows

the device & interfaces
Shows the switch/router path connecting the LinkRunner 10G to an IP device that UDP/TCP traffic
on across wired and Wi-Fi networks, and even beyond the local network, e.g., traverses
from the LinkRunner 10G’s test port to a server in the cloud or data center. The
LinkRunner 10G offers built-in tools to conduct further analysis of the devices
along the path: view configuration, interface traffic statistics, launch Telnet or
browser, conduct port scan, ping and more.

Simple “Access-Anywhere” Remote Control

LinkRunner 10G permits a remote engineer to control the EtherScope nXG “out
of band” (using VNC) to collaborate with technicians on-site, or to troubleshoot
remotely where there is no local staff. Shows the interfaces
of devices present in
But connecting to distant sites via VNC on different networks is difficult or path analysis
impossible, particularly behind NAT firewalls. With the AllyCare-enabled web
remote control, users can instantly connect to remote units through the Link-
Live Cloud Service – anywhere in the world – for collaborative and remote
troubleshooting.

6
 Network Topology Mapping – Integrated Wired
and Wi-Fi Network Diagrams
No more struggling to keep manually drawn maps up to date! LinkRunner
10G (with AllyCare support) automatically discovers both your wired and
Wi-Fi networks for instant mapping in NetAlly’s Link-Live Cloud Service.
These comprehensive, up-to-the-minute-accurate network diagrams
show your network as it is NOW, integrating Layer 2 and Layer 3 topology
information, including these connections: switch to host, switch to Access
Point, AP to Wi-Fi client, switch to switch, switch to router, and router to
router hops.
Link-Live makes it easy to collaborate and share maps to
Now, users can now interact with the network in a flexible map-based anyone who needs access, with no added licensing costs.
user interface to quickly visually identify configuration and topology One click exports your map to Microsoft Visio® where you
can easily add notations and modify your map.
issues, speeding troubleshooting, and automatically create network
documentation.

The LinkRunner 10G’s patented discovery engine gathers data from its wired
connection (via SNMP and other methods) and from the air (observing Wi-Fi
traffic) to generate comprehensive network connectivity maps.

Easy to use filters and map controls allow you to see exactly what you
want, and how you want it displayed. Quickly identify network and device
configuration errors, and see ‘unknown’ switches and rogue devices.
Element icons are color-coded to identify errors or warnings; double-
clicking on any map element brings up its detailed discovery information,
including status, problems, interface information, and more.

The importance of visualizing your network

The faster engineers can “see” what is going on in their network, to know Filters allow you to choose the types of devices
who is on the network and where they are connected, and what the and network configurations to be shown.
path is from “here to there”, the faster they can get to root cause when
troubleshooting performance issues. This is especially true for maintenance
organizations or system integrators who often troubleshoot an “unknown”
network. The problem is that traditional methods (CLI or element
managers) take too long and present complex data that’s often hard to
interpret and difficult to correlate.

Documentation is an essential step for any project, such as pre-deployment

network assessments and new technology rollouts, but it can take too
much time to complete. From the graphical map-based user interface, one
click sends the map data through a Visio file generator, pre-populating the
diagram with all discovered devices, links, and corresponding configuration
information, saving hours of manual effort, allowing further customization.

Ideal for enterprises or service organizations, LinkRunner 10G’s mapping Simple controls allow for instant customization of
function saves hours of manual labor, allowing documentation to keep up the map’s appearance and displayed data
as the network changes, or provide instant maps for client projects.

7
Discovery Difference Analysis in Link-Live
Keeping track of network changes while at the same time detecting
unauthorized devices connected to your network is essential for speeding
troubleshooting and securing your infrastructure, but is very hard to do on a
regular basis.
NetAlly’s Link-Live cloud service makes it fast and easy. The Discovery
Difference analysis simplifies the process of documenting network changes
or identifying unauthorized devices by comparing two network discovery
snapshots and automatically highlighting new or missing devices on your
network. This analysis can be viewed as a network topology diagram or data Discovery Difference analysis in Link-Live
table.
The first discovery test will provide a baseline of the original state of your
network, and the second discovery test will provide a snapshot of the current
state of your network. Link-Live will compare the two snapshots and then
highlight what has changed over time. That includes new devices that were not
originally part of your network, and devices that were removed.

Optical Power Meter

When connected with fiber, the AutoTest Link card has been augmented with
the ability to set a reference and display the current power reading relative
to that reference. This is useful for saving the power level at the source as a
reference, then measuring the fiber power loss at the far end.

Optical power meter

Models & Accessories

Model Number/Name Description
LinkRunner 10G Advanced Ethernet Tester
LR10G-100 Includes: (1) LR10G mainframe with Li-ION battery, G3-PWRADAPTER, SFP+MR-10G850, Inline RJ-45
coupler, WireView wire mapper #1, Quick Start Guide, and small soft case.

LinkRunner 10G Professional Kit

Includes: (1) LR10G mainframe with Li-ION battery, G3-PWRADAPTER, G3-HOLSTER, SF-P+MR-10G850,
LR10G-100-KIT
SFP+MR-10G1310, Cat 6 RJ-45 inline coupler, WireView wire mappers #1-#6, Quick Start Guide, and
medium soft case.

LR10G-100-1YS 1 year AllyCare Support for LR10G (Use for either LR10G-100 or LR10G-100-KIT)

LR10G-100-3YS 3 year AllyCare Support for LR10G (Use for either LR10G-100 or LR10G-100-KIT)

G3-PWRADAPTER AC Charger replacement/spare for EXG-200 mainframe with country power cords

Etherscope nXG 10G Performance Kit

Includes: (1) EtherScope nXG (EXG-200-KIT) and (1) LinkRunner 10G (LR10G-100)
EXG-LR10G-KIT
Purchase LR10G-100-1YS and EXG-200-1YS for 1 year of AllyCare support
Purchase LR10G-100-3YS and EXG-200-3YS for 3 years of AllyCare support
EXG-LR10G-HOLSTER Holster for LinkRunner 10G Mainframes
SFP+MR-10G850 SFP+ Optical Transceiver Module, SX/SR, 1G/10G, 850nm, Multimode
SFP+MR-10G1310 SFP+ Optical Transceiver Module, LX/LR, 1G/10G, 1310nm, Singlemode
US-WIFI-BT-USB Edimax n150 Wi-Fi & Bluetooth USB Adapter for US and Canada
EU-WIFI-BT-USB Edimax n150 Wi-Fi & Bluetooth USB Adapter for Europe

8
Specifications
General
Dimensions 4.05 in x 7.67 in x 2.16 in (10.3 cm x 19.5 cm x 5.5 cm)
Weight 1.68 oz (0.77kg)
Battery Rechargeable lithium-ion battery pack (7.2 V, 6.4 A, 46 Wh)
Typical operating life is 3-4 hours (Battery life from full charge varies depending on the feature being
Battery Life
used); Typical charge time is 3 hours
Display 5.0 in color LCD with capacitive touch screen (720 x 1280 pixels)
RJ-45 and SFP Analysis ports
Host Interfaces RJ-45 Cable Test and Management Port
USB Type-A Port and USB Type-C On-the-Go Port
SD card slot Supports Micro SD card storage - up to 64GB supported
Memory Approximately 8 GB available for storing test results and user applications, 1 GB packet capture buffer
Charging USB Type-C 45W adapter: 100-240 Vac, 50-60 Hz; DC Output Power 15 V (3 A)
Copper: 10M/100M/1G/2.5G/5G/10G
Media Access
Fiber SFP Adapters: 1G/10GBASE-X
Supported IEEE Wired: 802.3/ab/ae/an/bz/i/u/z
Standards PoE: 802.3af/at/bt, Class 0-8 and UPOE
Pair lengths, opens, shorts, split pairs, crossed, straight through, and WireView ID
Cable Test
Multi-Gig link Signal-to-Noise (SNR) measurement (5 dB threshold)
Environmental
Operating 32°F to 113°F (0°C to +45°C)
Temperature NOTE: The battery will not charge if the internal temperature of the device is above 122°F (50°C).
Operating relative 90% (50°F to 95°F; 10°C to 35°C)
humidity (% RH without
condensation) 75% (95°F to 113°F; 35°C to 45°C)
Storage temperature -4°F to 140°F (-20°C to +60°C)
Shock and vibration Meets the requirements of MIL-PRF-28800F for Class 3 Equipment
Safety IEC 61010-1:2010: Pollution degree 2
Altitude Operating: 4,000 m; Storage: 12,000 m
EMC IEC 61326-1: Basic Electromagnetic Environment; CISPR 11: Group 1, Class A
Certifications and Compliance
Conforms to relevant European Union directives
Conforms to relevant Australian Safety and EMC standards
Complies with 47 CFR Part 15 requirements of the U.S. Federal Communications Commission
Listed by the Canadian Standards Association
©2021 NetAlly®, LLC. Third-party trademarks mentioned are the property of their respective owners.

netally.com/products/linkrunner10g

simplicity • visibility • collaboration LR10G-DS-21-V2

9