Scribd
Upload
5 views2 pages

Module Content

Uploaded by

Philip
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
5 views2 pages

Module Content

Uploaded by

Philip
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

MODULE CONTENT

UNIT OF COMPETENCY : WELD CARBON STEEL PLATES AND


PIPES USING SMAW

MODULE TITLE : WELDING CARBON STEEL PLATES AND


PIPES USING SMAW

MODULE DESCRIPTOR : This module deals with the skills and


knowledge and attitudes required in welding carbon steel plates and pipes
using SMAW process.

NOMINAL DURATION : 194 Hours

LEARNING OUTCOMES:
At the end of this module you MUST be able to:
1. Perform root Pass
2. Clean root pass
3. Weld subsequent/filling passes
4. Perform Capping

ASSESSMENT CRITERIA:
1.Root pass is performed in accordance with WPS and/or client
specifications. 2.Task is performed in accordance with company or
industry requirement and safety procedure.
3.Weld is visually checked for defects and repaired, as required
4.Weld is visually acceptable in accordance with applicable codes and
standards
5.Root pass is cleaned and free from defects and Discontinuiting
6.Task is performed in accordance with approved WPS
7.Subsequent/ filling passes is performed in accordance with approved
WPS
8.Weld is visually checked for defects and repaired, as required
9.Weld is visually acceptable in accordance with applicable codes and
standards
10.Capping is performed in accordance with WPS and/or client
specifications
11.Weld is visually checked for defects and repaired, as required
12.Weld is visually acceptable in accordance with applicable codes and
standards

You might also like