Scribd
Upload
109 views10 pages

User Manual-WiFi Two-Way Auto-Reclosing Protector

Uploaded by

pippo.trecarichi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
109 views10 pages

User Manual-WiFi Two-Way Auto-Reclosing Protector

Uploaded by

pippo.trecarichi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 10

Overview

This all-in-one design smart IOT device applied to AC110V or 220V/230V, 50/60Hz, rated current up to 63A single phase circuits
in resident, commercial and industrial buildings with 2.4G WiFi, is a bi-directional measuring two-way meter to measure both
positive active energy consumption on grid and negative active energy from solar, and offers prepayment as option; to remote
control and set protections against over/under voltage, overcurrent, residual current(leakage), high temperature via mobile App
anytime anywhere; and auto reclosing after protected conditions recovery to achieve non-attended management;
programmable timing control to make your scheduled life efficiently and save electricity, and sharing device with your family
or persons concerned in your team. It also supports local manual control without WiFi, and voice control through AI speaker,
such as Amazon Alexa, Google Assistant, Yandex Alice, and etc.

Main specifications
Poles: single phase 2P;
Rated voltage: AC110V or 220V/230V (over/under voltage protection adjustable);
Rated current: 1~63A adjustable;
Frequency: 50/60Hz;
Display: LCD with backlight
Mounting: 35mm din-rail;

Functional features
01. Four options on control:
- Remote control anytime anywhere (mobile app, Tuya Smart, Smart Life)
- Voice control (AI speaker, Alexa, Google, Alice, ...)
- Timing control (programmable schedule)
- Manual control (by button)
02. Monitor real-time electricity statistics on phone (A, V, mA, kW, kW/h, ℃);
03. Bi-directional measuring positive and negative active energy consumption;
04. Prepaid metering mode available as option by switch;
05. Adjustable protections against over/under voltage, overcurrent, residual current(leakage), high temperature;
06. Overcurrent protection: 1~63A adjustable, 63A as default (alarm disable as option);
07. Over voltage protection: 120~300V adjustable, 275V as default (alarm disable as option);
08. Under voltage protection: 80~210V adjustable, 175V as default (alarm disable as option);
09. Residual current(leakage) protection: 10~99mA adjustable, 50mA as default (alarm disable as option);
10. Temperature protection: 10~85℃ adjustable, 80℃ as default (alarm disable as option);
11. Auto-reclosing after protected conditions recovery (disable as option);
12. Reclosing time delay: 1~99s adjustable, 30s as default;
13. Reclosing times allowed: 1~30 adjustable, 5 as default;
14. Local manual setting and operation on device (no need WiFi support);
15. Four modes timing schedule programmable on App;
16. Device sharing among family or your team;
Total energy (kW/h)

Leakage current (mA)

over/under voltage
Voltage (V) / setting indicator

Current (A) overcurrent / setting indicator

leakage / setting indicator

pulse indicator manual ON/OFF

signal indicator
1). reduce in data adjust
2). long press to enter pairing mode
1). click to view data in circle
increase in data adjust
2). long press to enter setup mode
How to add device in APP
1). Download and install APP on mobile, and register with your phone number;

Tuya Smart
2). Power on the meter, it will auto close after time delay countdown 30s, then long press for seconds,
the signal indicator flash fast to enter pairing mode;

3). Start Tuya Smart app on mobile, goes as following step by step;
Remote ON/OFF on mobile Enter prepaid metering mode

Timing schedule programmable here Adjust protection parameters

Local manual operation and settings


1). Data View on device
Click to view data and settings on the device, it will display as following in circle:

real-time kw/h, V, A, mA over voltage setting value under voltage setting value

over current setting value leakage setting value auto reclosing delay time

auto reclosing allowed times positive active energy real-time temperature ℃


negative active energy

2). Manual Setting on device


Long press for seconds, to enter setup mode, the display value flash and indicator lights,

adjust value by or ; shift items by

over voltage setting under voltage setting

adjust by or adjust by or

shift items by shift items by


over current setting leakage setting auto reclosing delay time

adjust by or adjust by or adjust by or

shift items by shift items by shift items by

auto reclosing allowed times

adjust by or

shift items by

Note:
All these manual settings offered as option for non WiFi application. If with good WiFi condition,
they are more easier to achieve in Tuya app on mobile, recommended to user’s daily operation.
Wiring diagram
WeChat WhatsApp

You might also like