URRICULUM
ITAE
INSTRUMENT & CONTROL TECHNICIAN
MUHAMMAD KAMRAN
Address# chak no 248 R.B Bissmillah pur post office khas Faisalabad.
City: Faisalabad Country: Pakistan
Cell# +92308-6804106, +92304-1357994
Email: [email protected]
OBJECTIVE
To find a progressive, challenging, & responsible position in instrument & Control Technologies
that would employ skills & capably and help out to develop my career.
COMPANY’S PROFILE
►I working in Engro Fertilizer Limited Daharki (EFERT) is high pressure, high temperature largest ,
UREA and AMMONIA manufacturer chemical plant in Pakistan. EFERT has its own power generation (57.5 MW)
used peak of technology for process automation and control system like DCS, PLC and microprocessor based
(SMART) instrumentation that can meet worldwide standards.
►I have worked in FPCL FFBL Power Company Limited. FPCL Power generation capacity is 118MW.
There are coal power plant so they have 4 steam turbines 50 and 60 HZ power generation. 60HZ make for FFBL
plant and 50HZ for K-Electric.
►FFBL FAUJI FERTILIZER BIN QASIM LIMITED. The largest Fertilizer company in Pakistan. i m on
working ENVEN plant ammonia urea utilities in general shift and attend call outs.
►SITARA CHEMECALS INDUSTRIES LTD.
Sitara chemecals Followling products
Caustic Soda Liquid (32-50 % )
Caustic Soda Flakes
Sodium Hypochlorite
Hydrochloric Acid
Liquid Chlorine
Bleaching Powder
Hydrated Lime
ACADEMIC QUALIFICATION
DIPLOMA OF ASSOCIATES ENGINEERING IN INSTRUMENTATION 2015 TO 2018
MATRIC 2015
EXPERIENCE AS INSTRUMENT TECHNICIAN
20-05-2022 To TILL now working in Engro Fertilizer Ltd Daharki (EFERT) as a Instrument and Control
Technician.
25-08-2021 To 20-05-2022 worked in FPCL (FFBL Power Company Limited) As a Instrument and Control
Technician.
2 year Apprenticeship18-08-2019 to 17-08-2021 Complete in Instrument Technician in (FFBL) Fauji
Fertilizer Bin Qasim Limited Karachi..
15-10-2018 TO 14-08-2019 worked in Sitara Chemicals Industry As a Instrument Technician.
RESPONSIBILITIES & CAPABILITIES
A member of maintenance team as an Instrument and control technician in EFERT LTD DAHARKI. This is
a tremendous Utilities, UREA, and AMMONIA COMPLEX in Pakistan.
Troubleshooting and maintenance of governing and over speed protection system of Turbine
Hand on experience in field instrumentation control system side PLC DCD Analyzers
Participate in 2 Turn-around and 1 force outage in EFERT Ltd DAHARKI since 2021.
Participate in 2 Turn-around in Fauji Fertilizer Bin Qasim LTD.
Participate in 1 Turn-around in FFBL Power Company.
Responsible for preventive and corrective maintenance Troubleshooting and M aintenance of field and
control room instruments.
Ensure all instrument maintenance works are executed in a safe and efficient manner in complains
company's and client's safety and quality procedures
Performed duties in rotating shift, Call out as well as General shift.
JOB PLANNING AND EXECUTION
Job planning is one of the most important activities which mainly depend on the maximu m utilization of available
resources including manpower for the completion of one or more than one tasks within predefined time of span.
The significance of job planning becomes more critical in annual shutdowns where number of jobs have to be
completed within the definite time. Beside this I also have to keep the job quality up to standards and within the
safety limits so that any type of human and equipment loss can be minimized.
GAS TURBINE (TRICOEIX,MARK V, MARKVI, MARKVI-E) 57.5MW, WITH COMBINE
CYCLE
I have experienced of Gas Turbine Major Overhauling.
Gas turbine instruments calibration.
Calibration of GCV and SRV in Auto calibration.
Exhaust thermocouple jumper and replacement activity, Logic forcing and software based
troubleshooting.
COMPRESSORS AND GAS TURBINE
Maintenance and troubleshooting experience of compressors both centrifugal &
reciprocating (steam and electrical power driven) and their associated controls such as
Bentley Nevada, 3300 and 3500 series, CCC (Anti Surge Control), used for Gas
Compressions, and lube oil control systems, interlocks with DCS and ESD.
BOILERS & HEAT RECOVERY STEAM GENRATOR (HRSG)
Knowledge of Boiler protections and work experience on BMS and instrumentation of boiler with
complete understanding of Boilers Level Control (3-Element) & Combustion Control System and their
maintenance and troubleshooting activities.
Boiler’s Instruments overhauling, maintenance and Instrumentation Calibration.
Burner Management System.(BMS)
I know about Three-Element loop, firing control with ratio controlling.
Handsome experience of running and startup problems.
Two boilers (HRSG 85 ton and AUX 105 ton) are used for steam Generation at Utilities Plant
STEAM TURBINE (WOOD WARD PEAK 150 AND 505)
Steam turbine instruments overhauling and maintenance.
Installation of magnetic pick up probes for speed measurement at steam turbines.
Calibration and Installation of temperature switches at inboard and outboard of steam turbine .
DISTRIBUTED CONTROL SYSTEM (DCS) & PLC
1. DCS (BAILEY Infi90, ABB800XA, Yokogawa Centum VP 06)
2. PLC (Semines S7-400/300, )
Understanding of Logic and Loop Diagrams.
Control Loop Testing and Troubleshooting
ANALYZER
Analyzer calibration and Troubleshooting (OXYGEN (Zirconia, Paramagnetic), Conducti vity
NH3(DETECTOR), Chlorine, PH, Silica ,GC Analyzer.
FEILD INSTRUMENTATION
I have a good approach to resolve the calibration and maintenance problem of local and remote instruments .
TRANSMITTERS:
2
Electronic and pneumatic and smart series transmitters of ROSEMOUNT, YOKOGAWA
HONEYWELL Manufacturer of Pressure, Level, Temperature, Flow, Ultra s onic, Radar/Guided wave
and Capacitance/displacer type transmitter.
Calibration and troubleshooting of Pressure, Level, Temperature, Flow, Ultra sonic and
Capacitance/displacer type transmitter.
SWITCHES:
Pressure switches (Diaphragm type, Bourdon tube type), Level switches (float type) flow switches,
Temperature switches (Capillary type and bimetallic type).
Calibration of Pressure, Level, Temperature, and Ultra sonic switches.
SENSORS & TRANSDUCER:
Magnetic pickups (Active and passive), RTD`s. Thermocouples, UV Flame scanners, proximity type
switches, and Tachometer, Sismic probe(Active & Passive)
Pressure Transducers, I/P converter, P/I converter and Load cell.
CONTROL VALVES:
I can perform complete overhauling of control valve, and troubleshooting installation, Tubing and
Calibration, of globe, Saunders, shuttle, throttling and self-regulating control valves in the area, with
maintenance an repairing their pneumatic devices, Pneumatic and Smart Positioners of Fisher 3560,
3570, 3582,3582i, Masoneliaan 7400,8013, SVI-II.
Calibration, maintenance and fault finding and rectification of Control Valves problems.
Gland packing, diaphragm replacement, Trim parts checking and replacement.
Solenoid valve (maintenance and troubleshooting) and installation.
VIBRATION MONITORING SYSTEM:
Bentley Nevada (3300, 3500 series)
Adjustment of set point Alert and Danger, Bypass activity field signals, characteristics diagnostics of
vibration probes, their installation, proximitters compatibility with probes and extension cables.
SAFETY AWARENESS
Handsome safety awareness against personal safety as well as plant safety. Safety working procedure .
Follow-up Safety standard DO-PONT
Strong knowledge of Lockout & Tag out Procedures (LOTO TO).
Process Safety Management (PSM)
Follow-up Safety standard (PSSR)
Permit to work system (PTW).
Use of Personal Protective Equipment.(PPEs)
Having fire-fighting training, special training on safety topics like housekeeping, fire emergency
handling and first aid etc.
PERSONAL APPEARANCE
Father name : M. Adnan Bashir
N.I.C# : 33100-0607485-1
Passport No :
Nationality : Pakistani
Religion : Islam
Domicile : Faisalabad
Profession : Instrument & Control Technician
E-Mail Address : [email protected] m
Marital Status : Single
