Scribd
Upload
18 views4 pages

Modbus Ascii

Uploaded by

Meng Hour
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
18 views4 pages

Modbus Ascii

Uploaded by

Meng Hour
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

PLC Connection Guide

MODBUS ASCII
Supported Series: MODBUS ASCII CONTROLLER
Website: http://www.modbus.org

HMI Setting:
Parameters Recommended Options Notes
PLC type MODBUS ASCII
PLC I/F RS485 RS232/RS485
9600/19200/38400/
Baud rate 9600
57600/115200
Data bits 8 7,8
Parity Even Even, Odd, None
Stop bits 1 1,2
PLC sta. no. 1 0-255

Online simulator YES Broadcast command YES


Extend address mode YES

PLC Setting:
Communication mode Modbus ASCII protocol

Device Address:
Bit/Word Device type Format Range Memo
B 1x DDDDD 1 ~ 65535 Input bit (read only)
B 0x DDDDD 1 ~ 65535 Output bit
B 3x_Bit DDDDDdd 100 ~ 6553515 Input Register bit (read only)
B 4x_Bit DDDDDdd 100 ~ 6553515 Output Register bit
W 3x DDDDD 1 ~ 65535 Input Register (read only)
W 4x DDDDD 1 ~ 65535 Output Register
W 6x DDDDD 1 ~ 65535
Note: EBPro V6.03.02 or later supports 64 bits data type, but please note that the address
limit range is 48 bits in maximum.
PLC Connection Guide
Modbus RTU function code:
0x 0x01 Read coil 0x05 write single coil
1x 0x02 Read discrete input N/A for write operation
3x 0x04 Read input register N/A for write operation
4x 0x03 Read holding register 0x10 write multiple registers
3xbit is equivalent to 3x
4xbit is equivalent to 4x

Wiring Diagram:
Diagram 1
RS-232
The serial port pin assignments may vary between HMI models, please click the following
link for more information.

HMI PLC

Link RS232

Rx TXD

Tx RXD

GND GND

RTS

CTS
PLC Connection Guide

Diagram 2
RS-485 4W
The serial port pin assignments may vary between HMI models, please click the following
link for more information.

HMI PLC

Link RS485 4W

Rx- Tx-

RX+ Tx+

Tx- Rx-

Tx+ Rx+

GND GND
PLC Connection Guide

Diagram 3
RS-485 2W
The serial port pin assignments may vary between HMI models, please click the following
link for more information.

HMI PLC

Link RS485 2W

Data- D-

Data+ D+

GND GND

You might also like