Scribd
Upload
4 views4 pages

Book 1

Uploaded by

Omkar Ghodke
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
4 views4 pages

Book 1

Uploaded by

Omkar Ghodke
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 4

fck =20N/mm2

fy = 415 N/mm2

B X D =500mm X 500mm

PU = 600 KN SBC = 120 KN/m2

STEP 1 : DETERMINE THE SIZE FOOTING

ASSUME SELF WT OF FOOTING W0 =

TOTAL LOAD = W =WL +W0

REQUIRED AREA OF FOOTING (A) =W/SBC

FOR SQURE FOOTING

PROVIDE SQURE FOOTING OF SIZE

STEP 2 :TO FIND OUT NET UPWARD PRESSURE

UPWARD PRESSURE ON FOOTING (6) = (P0 =W/B2 )

STEP 3 : DEPTH OF FOOTING ON A BASIS OF BM

THE MAX BM ACTS AS FACE OF THE COLUMN SO M=P 0B/8(B-b)2

ULTIMATE MOMENT (MU) MU= 1.5 XM


DEPTH REQUIRED (MU =0.138FckBd 2 )

DUE TO THE SHEAR CONSIDERATION ALWAYS PREFER HIGHER DEPTH

STEP 4 : AREA OF REINFORCEMENT (AST)

AST

PERCENTAGE OF REINFORCEMENT (P) = AST/Bd x 100

USING 12MM @ BARS IN BOTH DIRECTION

ast =

NUMBERS OF BARS = AST/ast

PROVIDE 12MM BARS UNIFORMLY IN BOTH DIRECTION

SPACING =B/NO.OF BARS

STEP 5 : check for one way shear

1)SHEAR FORCE (v)

2) ULTIMATE SHEAR FORCE (VU =1.5V)

3) NOMINAL SHEAR STRESS (tv) = VU/Bd (p.72 IS456 2000)

4)DESIGN SHEAR STRENGTH (t c ) FOR 0.138%P

(tv) <
DESIGN OF SLOPING ISOLATED SQURE FOOTING

10% X 600 = 60 KN

600+60 = 660 KN

660/120 = 5.52

2.345

2.4 m X2.4 m

660/2.42 = 114.58 KN/M2

124.1 KN/m2

186.15 KNM
d=170mm D=170+50 =220mm

DTAKEN =400 ADDING 50 COVER =450 mm

1327.7mm2

1327.7/2400 x2400 x100 = 0.138%

113mm2

1327.7/113 = 12 BARS

2400/12 =200mm C/C

151.24 KN

1.5 X151.24 = 226.86KN

226.86/2400 x400 =0.236

0.28N/mm2

tc

You might also like