Scribd
Upload
11 views11 pages

New 7

Uploaded by

june cadayona
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
11 views11 pages

New 7

Uploaded by

june cadayona
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 11

#include <Wire.

h>
#include <LiquidCrystal_I2C.h> // library for LCD with I2C
#include <virtuabotixRTC.h>
virtuabotixRTC myRTC(6, 7, 8);

LiquidCrystal_I2C lcd(0x26, 16, 2);

#include <EEPROM.h>

const int btnChange = 2;


const int btnOK = 3;
const int btnMode = 4;
const int buzzer = 5;

int alarmHour = 12;


int alarmMinutes = 0;
boolean hourMode = 0;
boolean alarmOn = 1;
int M = 12;
int D = 31;
int Y = 2020;
int day = 7;
int h = 23;
int m = 59;

int addrH[] = {0, 1, 2, 3, 4};


int addrM[] = {5, 6, 7, 8, 9};
int addrActive[] = {10, 11, 12, 13, 14};

int mode = 1;
int submode = 1;
int slot = 0;

byte clockChar[] = {B00000, B01110, B10101, B10101, B10111, B10001, B01110,


B00000};
byte alarmChar[] = {B00100, B01110, B01110, B01110, B11111, B00000, B00100,
B00000};
byte dateChar[] = {B11111, B00000, B01100, B01010, B01010, B01100, B00000, B11111};

void setup() {

pinMode(btnChange, INPUT_PULLUP);
pinMode(btnOK, INPUT_PULLUP);
pinMode(btnMode, INPUT_PULLUP);
pinMode(buzzer, OUTPUT);

lcd.begin(); // initialize the LCD


lcd.backlight(); // Turn on the blacklight
lcd.createChar(0, clockChar);
lcd.createChar(1, alarmChar);
lcd.createChar(2, dateChar);

Serial.begin(9600);

/////////////////////////////////////////////////////////////////// void
LOOP ///////////////////////////////////////////

void loop() {

if (digitalRead(btnMode) == LOW) {
mode++;
Serial.println("btnMode press");
if (mode == 4) {
mode = 1;
}
submode = 0;
lcd.clear();
delay(200);
}

if (mode == 1) {
clockDisplay();
Serial.println(mode);
// delay(200);
}

if (mode == 2) {
alarmMode();
Serial.println(mode);
// delay(200);
}

if (mode == 3) {
updateRTC();
Serial.println(mode);
// delay(200);
}
if (mode == 0) {
alarm();
Serial.println(mode);
EEPROM.write(addrActive, 0);
// delay(200);
}
for (int x = 0; x < 5; x++) {
if (EEPROM.read(addrActive[x]) == 1) {
Serial.print("alarm slot active: ");
Serial.println(x);
if ( myRTC.hours == EEPROM.read(addrH[x]) && myRTC.minutes ==
EEPROM.read(addrM[x])) {
EEPROM.write(addrActive[x], 0);
mode = 0;
}
}
}
}

void alarm() {
clockDisplay();
lcd.noBacklight();
digitalWrite(buzzer, HIGH);
delay(300);
lcd.backlight();
digitalWrite(buzzer, LOW);
delay(200);
}

/////////////////////////////////////////////////////////////////// CLOCK DISPLAY


///////////////////////////////////////////

void clockDisplay() {
myRTC.updateTime();
// lcd.clear();
lcd.setCursor(0, 0);
lcd.write(0);

lcd.setCursor(0, 1);
switch (myRTC.month) {
case 1: lcd.print("Jan"); break;
case 2: lcd.print("Feb"); break;
case 3: lcd.print("Mar"); break;
case 4: lcd.print("Apr"); break;
case 5: lcd.print("May"); break;
case 6: lcd.print("Jun"); break;
case 7: lcd.print("Jul"); break;
case 8: lcd.print("Aug"); break;
case 9: lcd.print("Sep"); break;
case 10: lcd.print("Oct"); break;
case 11: lcd.print("Nov"); break;
case 12: lcd.print("Dec"); break;
}

if (myRTC.dayofmonth < 10) {


lcd.print(" ");
lcd.print(myRTC.dayofmonth);
}
else{
lcd.print(myRTC.dayofmonth);
}
lcd.print(",");
lcd.print(myRTC.year);

lcd.setCursor(13, 1);
switch (myRTC.dayofweek) {
case 1: lcd.print("Sun"); break;
case 2: lcd.print("Mon"); break;
case 3: lcd.print("Tue"); break;
case 4: lcd.print("Wed"); break;
case 5: lcd.print("Thu"); break;
case 6: lcd.print("Fri"); break;
case 7: lcd.print("Sat"); break;
}
lcd.setCursor(3, 0);
if ((myRTC.hours > 12 && myRTC.hours < 22) || (myRTC.hours > 0 && myRTC.hours <
10)) {
lcd.print("0");
}
if (myRTC.hours == 0) {
lcd.print("12");
}
else if (myRTC.hours <= 12) {
lcd.print(myRTC.hours);
}
else {
lcd.print(myRTC.hours - 12);
}
lcd.print(":");
if (myRTC.minutes < 10) {
lcd.print("0");
}
lcd.print(myRTC.minutes);
lcd.print(":");
if (myRTC.seconds < 10) {
lcd.print("0");
}
lcd.print(myRTC.seconds);
lcd.print(" ");
if (myRTC.hours < 12) {
lcd.print("AM");
}
else {
lcd.print("PM");
}
}

/////////////////////////////////////////////////////////////////// ALARM
FUNCTION ///////////////////////////////////////////
void alarmMode() {
if (submode == 0) {
lcd.setCursor(0, 0);
lcd.write(1);
lcd.setCursor(2, 0);
lcd.print("Select:");

if (digitalRead(btnChange) == LOW) {
slot++;
if (slot > 4 ) {
slot = 0;
}
delay(200);
}
lcd.setCursor(10, 0);
lcd.print("Slot#");
lcd.print(slot + 1);
lcd.setCursor(0, 1);
if (EEPROM.read(addrH[slot]) > 23) {
EEPROM.write(addrH[slot], 0);
}
if (EEPROM.read(addrM[slot]) > 59) {
EEPROM.write(addrM[slot], 0);
}
if (EEPROM.read(addrActive[slot]) > 1) {
EEPROM.write(addrActive[slot], 0);
}
if ((EEPROM.read(addrH[slot]) > 12 && EEPROM.read(addrH[slot]) < 22) ||
(EEPROM.read(addrH[slot]) > 0 && EEPROM.read(addrH[slot]) < 10)) {
lcd.print("0");
}
if (EEPROM.read(addrH[slot]) == 0) {
lcd.print("12");
alarmHour = 12;
}
else if (EEPROM.read(addrH[slot]) <= 12) {
lcd.print(EEPROM.read(addrH[slot]));
alarmHour = EEPROM.read(addrH[slot]);
}
else {
lcd.print(EEPROM.read(addrH[slot]) - 12);
alarmHour = EEPROM.read(addrH[slot]) - 12;
}
lcd.print(":");
if (EEPROM.read(addrM[slot]) < 10) {
lcd.print("0");
}
lcd.print(EEPROM.read(addrM[slot]));
alarmMinutes = EEPROM.read(addrM[slot]);
lcd.print(" ");
if (EEPROM.read(addrH[slot]) < 12) {
lcd.print("AM");
hourMode = 0;
}
else {
lcd.print("PM");
hourMode = 1;
}
lcd.print(" ");
if (EEPROM.read(addrActive[slot]) == 1) {
lcd.print("ON ");
}
else {
lcd.print("OFF");
}
}
else {
lcd.setCursor(0, 0);
lcd.write(1);
lcd.setCursor(2, 0);
lcd.print("Set ||");
lcd.setCursor(0, 1);
lcd.print("Alarm ||");
lcd.setCursor(9, 1);
if (alarmHour < 10) {
lcd.print("0");
lcd.setCursor(10, 1);
}
lcd.print(alarmHour);
lcd.setCursor(11, 1);
lcd.print(":");
lcd.setCursor(12, 1);
if (alarmMinutes < 10) {
lcd.print("0");
lcd.setCursor(13, 1);
}
lcd.print(alarmMinutes);
if (hourMode == 0) {
lcd.print("AM");
}
else {
lcd.print("PM");
}
}
// lcd.print(alarmMinutes);
if (digitalRead(btnOK) == LOW) {
submode++;
if (submode > 4) {
submode = 0;
}
delay(200);
lcd.clear();
}
if (submode == 1) {
lcd.setCursor(9, 0);
lcd.write(1);
lcd.write(1);
if (digitalRead(btnChange) == LOW) {
alarmHour++;
if (alarmHour > 12) {
alarmHour = 1;
}
delay(500);
}
}
if (submode == 2) {
lcd.setCursor(12, 0);
lcd.write(1);
lcd.write(1);
if (digitalRead(btnChange) == LOW) {
alarmMinutes++;
if (alarmMinutes >= 60) {
alarmMinutes = 0;
}
delay(500);
}
}
if (submode == 3) {
lcd.setCursor(14, 0);
lcd.write(1);
lcd.write(1);
if (digitalRead(btnChange) == LOW) {
hourMode = !hourMode;
delay(500);
}
}
while (submode == 4) {
lcd.setCursor(0, 0);
lcd.print("Activate Alarm?");
lcd.setCursor(0, 1);
lcd.print("Slot #");
lcd.print(slot + 1);
lcd.print(" ");
if(alarmOn==1){
lcd.print("ON ");
}
else{
lcd.print("OFF");
}
if (digitalRead(btnChange) == LOW) {
alarmOn = !alarmOn;
delay(200);
}
if (digitalRead(btnOK) == LOW && alarmOn == 1) {
lcd.clear();
lcd.setCursor(0, 1);
lcd.print("Saving.");
delay(200);
lcd.print(".");
delay(200);
lcd.print(".");
delay(200);
lcd.print(".");
delay(200);
lcd.print(".");
delay(200);
lcd.print(".");
delay(200);
lcd.print(".");
delay(200);
lcd.print(".");
delay(200);
lcd.print(".");
if (hourMode == 1 && alarmHour != 12) {
EEPROM.write(addrH[slot], alarmHour + 12);
}
else if (hourMode == 0 && alarmHour == 12) {
EEPROM.write(addrH[slot], 0);
}
else {
EEPROM.write(addrH[slot], alarmHour);
}

EEPROM.write(addrM[slot], alarmMinutes);
EEPROM.write(addrActive[slot], 1);
submode = 0;
mode = 1;
lcd.clear();
}
if (digitalRead(btnOK) == LOW && alarmOn == 0) {
lcd.clear();
lcd.setCursor(0, 0);
lcd.print("Alarm Slot#");
lcd.print(slot + 1);
lcd.setCursor(0, 1);
lcd.print(" OFF ");

EEPROM.write(addrActive[slot], 0);
submode = 0;
mode = 1;

delay(2000);
lcd.clear();
}
}
}

/////////////////////////////////////////////////////////////////// SETTING DATE


& TIME FUNCTION ///////////////////////////////////////////

void updateRTC() {
lcd.setCursor(0, 0);
lcd.write(2);
if (digitalRead(btnOK) == LOW) {
submode++;
if (submode > 7) {
submode = 0;
}
delay(200);
lcd.clear();
}

if (submode == 0) {
lcd.setCursor(2, 0);
lcd.print(" Set Date/Time?");
lcd.setCursor(0, 1);
lcd.print("Press OK button");
}
if (submode == 1) {
lcd.setCursor(2, 0);
lcd.print("Set Month");
lcd.setCursor(0, 1);
lcd.print("--> ");
if (digitalRead(btnChange) == LOW) {
M++;
if (M == 13) {
M = 1;
}
delay(200);
}
switch (M) {
case 1: lcd.print("January ");
break;
case 2: lcd.print("February ");
break;
case 3: lcd.print("March ");
break;
case 4: lcd.print("April ");
break;
case 5: lcd.print("May ");
break;
case 6: lcd.print("June ");
break;
case 7: lcd.print("July ");
break;
case 8: lcd.print("August ");
break;
case 9: lcd.print("September ");
break;
case 10: lcd.print("October ");
break;
case 11: lcd.print("November ");
break;
case 12: lcd.print("December ");
break;
}
}
if (submode == 2) {
lcd.setCursor(2, 0);
lcd.print("Set Day");
lcd.setCursor(0, 1);
lcd.print("--> ");
if (digitalRead(btnChange) == LOW) {
D++;
if (D == 32) {
D = 1;
}
delay(200);
}
lcd.print(D);
lcd.print(" ");
}

if (submode == 3) {
lcd.setCursor(2, 0);
lcd.print("Set Year");
lcd.setCursor(0, 1);
lcd.print("--> ");
if (digitalRead(btnChange) == LOW) {
Y++;
if (Y == 2099) {
Y = 2000;
}
delay(200);
}
lcd.print(Y);
}
if (submode == 4) {
lcd.setCursor(2, 0);
lcd.print("Set Day of the Week");
lcd.setCursor(0, 1);
lcd.print("--> ");
if (digitalRead(btnChange) == LOW) {
day++;
if (day == 8) {
day = 1;
}
delay(200);
}
switch (day) {
case 1: lcd.print("Sunday ");
break;
case 2: lcd.print("Monday ");
break;
case 3: lcd.print("Tuesday ");
break;
case 4: lcd.print("Wednesday ");
break;
case 5: lcd.print("Thursday ");
break;
case 6: lcd.print("Friday ");
break;
case 7: lcd.print("Saturday ");
break;
}
}
if (submode == 5) {
lcd.setCursor(2, 0);
lcd.print("Set Hour");
lcd.setCursor(0, 1);
lcd.print("--> ");
if (digitalRead(btnChange) == LOW) {
h++;
if (h == 24) {
h = 0;
}
delay(200);
}
if (h > 12) {
lcd.print(h - 12);
lcd.print(" ");
}
else if (h == 0) {
lcd.print("12");
lcd.print(" ");
}
else {
lcd.print(h);
lcd.print(" ");

}
if (h >= 12) {
lcd.setCursor(9, 1);
lcd.print("PM");
}
else {
lcd.setCursor(9, 1);
lcd.print("AM");
}

}
if (submode == 6) {
lcd.setCursor(2, 0);
lcd.print("Set Minutes");
lcd.setCursor(0, 1);
lcd.print("--> ");
if (digitalRead(btnChange) == LOW) {
m++;
if (m == 60) {
m = 0;
}
delay(200);
}
lcd.print(m);
lcd.print(" ");
}
if (submode == 7) {
lcd.setCursor(2, 0);
lcd.print("Date & Time");
lcd.setCursor(0, 1);
lcd.print("Updating");
delay(200);
lcd.print(".");
delay(200);
lcd.print(".");
delay(200);
lcd.print(".");
delay(200);
lcd.print(".");
delay(200);
lcd.print(".");
delay(200);
lcd.print(".");
delay(200);
lcd.print(".");
delay(200);
lcd.print(".");
myRTC.setDS1302Time(00, m, h, day, D, M, Y);
delay(200);
lcd.clear();
mode = 1;
}
}

You might also like