Scribd
Upload
5 views3 pages

New 9

Uploaded by

june cadayona
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
5 views3 pages

New 9

Uploaded by

june cadayona
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 3

//Viral Science www.viralsciencecreativity.com www.youtube.

com/c/viralscience
//Arduino Timer Relay - Triger relay for specific time

#include <LiquidCrystal_I2C.h> //https://github.com/fdebrabander/Arduino-


LiquidCrystal-I2C-library
LiquidCrystal_I2C lcd(0x3F, 16, 2); // LCD HEX address 0x3F -- change according to
yours
#include "Countimer.h" //https://github.com/inflop/Countimer
Countimer tdown;
#include <EEPROM.h>

#define bt_set A3
#define bt_up A2
#define bt_down A1
#define bt_start A0

int time_s = 0;
int time_m = 0;
int time_h = 0;

int set = 0;
int flag1=0, flag2=0;

int relay = 5;
int buzzer = 6;

void setup() {
Serial.begin (9600);

pinMode(bt_set, INPUT_PULLUP);
pinMode(bt_up, INPUT_PULLUP);
pinMode(bt_down, INPUT_PULLUP);
pinMode(bt_start, INPUT_PULLUP);

pinMode(relay, OUTPUT);
pinMode(buzzer, OUTPUT);

lcd.begin();
lcd.clear();
lcd.setCursor(0,0);
lcd.print(" Welcome To ");
lcd.setCursor(0,1);
lcd.print("Countdown Timer");
tdown.setInterval(print_time, 999);
eeprom_read();
delay(1000);
lcd.clear();
}

void print_time(){
time_s = time_s-1;
if(time_s<0){time_s=59; time_m = time_m-1;}
if(time_m<0){time_m=59; time_h = time_h-1;}
}

void tdownComplete(){Serial.print("ok");}

//tdown.stop();
void loop(){
tdown.run();

if(digitalRead (bt_set) == 0){


if(flag1==0 && flag2==0){flag1=1;
set = set+1;
if(set>3){set=0;}
delay(100);
}
}else{flag1=0;}

if(digitalRead (bt_up) == 0){


if(set==0){tdown.start(); flag2=1;}
if(set==1){time_s++;}
if(set==2){time_m++;}
if(set==3){time_h++;}
if(time_s>59){time_s=0;}
if(time_m>59){time_m=0;}
if(time_h>99){time_h=0;}
if(set>0){eeprom_write();}
delay(200);
}

if(digitalRead (bt_down) == 0){


if(set==0){tdown.stop(); flag2=0;}
if(set==1){time_s--;}
if(set==2){time_m--;}
if(set==3){time_h--;}
if(time_s<0){time_s=59;}
if(time_m<0){time_m=59;}
if(time_h<0){time_h=99;}
if(set>0){eeprom_write();}
delay(200);
}

if(digitalRead (bt_start) == 0){ flag2=1;


eeprom_read();
digitalWrite(relay, HIGH);
tdown.restart();
tdown.start();
}

lcd.setCursor(0,0);
if(set==0){lcd.print(" Timer ");}
if(set==1){lcd.print(" Set Timer SS ");}
if(set==2){lcd.print(" Set Timer MM ");}
if(set==3){lcd.print(" Set Timer HH ");}

lcd.setCursor(4,1);
if(time_h<=9){lcd.print("0");}
lcd.print(time_h);
lcd.print(":");
if(time_m<=9){lcd.print("0");}
lcd.print(time_m);
lcd.print(":");
if(time_s<=9){lcd.print("0");}
lcd.print(time_s);
lcd.print(" ");
if(time_s==0 && time_m==0 && time_h==0 && flag2==1){flag2=0;
tdown.stop();
digitalWrite(relay, LOW);
digitalWrite(buzzer, HIGH);
delay(300);
digitalWrite(buzzer, LOW);
delay(200);
digitalWrite(buzzer, HIGH);
delay(300);
digitalWrite(buzzer, LOW);
delay(200);
digitalWrite(buzzer, HIGH);
delay(300);
digitalWrite(buzzer, LOW);
}

if(flag2==1){digitalWrite(relay, HIGH);}
else{digitalWrite(relay, LOW);}

delay(1);
}

void eeprom_write(){
EEPROM.write(1, time_s);
EEPROM.write(2, time_m);
EEPROM.write(3, time_h);
}

void eeprom_read(){
time_s = EEPROM.read(1);
time_m = EEPROM.read(2);
time_h = EEPROM.read(3);
}

You might also like