Seminar Report

On

Technology

G.H.Raisoni College Of Engineering & Technology

Dept:- Information & Technology

Participants :-
1)Rushikesh Jogle (9028540085)
2)Chinmay Patil (9821383878)
 TABLE OF CONTENTS

● INTRODUCTION
● How it works
● uses model
● comparision with other wireless technologies
● APPLICATION
● advantages of Bluetooth technology
 ● CONCLUSION
● Reference

Introduction to Bluetooth Technology

Bluetooth is a radio frequency specification for short range, point to point and
point to multi point voice and data transfer. Bluetooth technology facilitates the
replacement of cables normally used to connect one device to another by a short
range radio link. With the help of blue tooth we can operate our keyboard and
mouse without direct connection of CPU. Printers, fax machines, headphone,
mouse, keyboard or any other digital devices can be part of Bluetooth system.

In spite of facilitating the replacement of cables, Bluetooth technology works

as an universal medium to bridge the existing data networks, a peripheral
interface for existing devices and provide a mechanism to form short ad hok
network of connected devices away from fixed network infrastructures.

Due to their independence on short range radio link, Bluetooth devices do not
require a line of site connection in order to communicate. Therefore a computer
can print information on a printer if printer is in inside the room. Two blue tooth
devices can talk to each other when they come within range of 10 meters to
each other.

Bluetooth technology represents an opportunity for the industry to deliver

wireless solutions that are ubiquitous across a broad range of devices.

Why it’s name is Bluetooth?

While many new technologies bear technical names, like RS-232 or IEEE
802.11b, Bluetooth, the wireless technology, is different.

Bluetooth was named for the 10th Century Viking king , Harald Blatand
(A.K.A., Bluetooth) who peacefully united all the tiny island kingdoms of
Denmark, southern Sweden, and southern Norway into one country . In
keeping with its namesake, Bluetooth, the new low-cost radio technology, is
designed to unite or connect all different types of devices to effectively work
as one. By uniting devices, Bluetooth eliminates the need for cabling in a
wide range of products, including cellular phones, PCs, headphones, audio
equipment, printers, and many more.

Bluetooth Definitions

● Piconet: Devices connected in an ad hoc fashion, that is, not requiring

predefinition and planning, as with a standard network. Two to eight
devices can be networked into a piconet. It is a peer network, that is,
once connected, each device has equal access to the others. However,
one device is defined as master, and the others as slaves.
● Scatternet: Several piconets may form a larger scatternet, with each
piconet maintaining independence.
● Master unit: The master in a piconet whose clock and hopping sequence
synchronizes the other devices.
● Slave unit: Devices in a piconet that are not the master.
● MAC address: Three bit address that distinguishes each unit in a piconet.
● Parked units: Piconet devices that are synchronized but don't have MAC
addresses.
● Sniff and hold mode: Power-saving mode of a piconet device.
 How Bluetooth Technology Work

The technology of Bluetooth centers around a 9mm x 9mm microchip, which

functions as a low cost and short range radio link. Bluetooth Technology provide
a 10 meter personal bubble that support simultaneous transmission of both voice
and data for multiple devices. Up to 8 devices can be connected in a piconet, and
uo to 10 piconets can exist within the 10 meter bubble. Each piconet support
up to 3 simultaneous full duplex voice devices.
The gross data rate is 1 Mb/s, but the actual data rate are 432 kbps for full
duplex transmission,721/56kbps for asymmetric transmission, and 384 kbps for
tms2000 transmission.
Bluetooth wireless technology is designed to be as secure as a wire with
up to 128-bit public/private key authentication, and streaming cipher up to 64 bit
based on a5 security.

Transmission types and rates :

The baseband (single channel per line) protocol combines circuit and
packet switching. To assure that packets do not arrive out of order, slots (up
to five) can be reserved for synchronous packets. As noted earlier, a different
hop signal is used for each packet. Circuit switching can be either
asynchronous or synchronous. Up to three synchronous (voice) data
channels, or one synchronous and one asynchronous data channel, can be
supported on one channel. Each synchronous channel can support a 64 Kb/s
transfer rate, which is fully adequate for voice transmissions. An
asynchronous channel can transmit as much as 721 Kb/s in one direction and
57.6 Kb/s in the opposite direction. It is also possible for an asynchronous
connection to support 432.6 Kb/s in both directions if the link is symmetric.

Radio frequency and spectrum hopping :

What if there's a lot of radio noise? Won't that interfere with Bluetooth
connections? As a rule, the answer is no. It is designed to use fast
acknowledgement and frequency hopping, which will make connections
robust. It is packet-based, and will jump to a new frequency after each
packet is received, which not only helps limit interference problems, but also
adds to security. Data rates are one megabyte/second, including headers. Full
duplex transmissions (both directions at once) are accomplished via time
division multiplexing.
The Bluetooth radio chip functions at 2.4 gigahertz, which is in the
unlicensed ISM (Industrial Scientific Medical) band. It separates the 2.4
gigahertz frequency band into 79 hops one megahertz apart, starting with
2.402 and ending with 2.480 (though this bandwidth is narrower in Japan,
France, and Spain). This spread spectrum is used to hop from one channel to
another, pseudo-randomly, which adds a strong layer of security. Up to 1600
hops per second can be made. The standard frequency range is 10
centimeters to 10 meters, and can be extended to at least 100 meters by
increasing transmission power.

Data transmission:
Data can be transmitted both synchronously and asynchronously. The
Synchronous Connection Oriented (SCO) method is used primarily for voice,
and Asynchronous Connectionless (ACL) is primarily for data. Within a
piconet, each master-slave pair can use a different transmission mode, and
modes can be changed at any time. Time Division Duplex (TDD) is used by
both SCO and ACL, and both support 16 types of packets, four of which are
control packets that are the same in each type. Because of the need for
smoothness in data transmission, SCO packets are generally delivered via
reserved intervals, that is, the packets are sent in groups without allowing
other transmissions to interrupt. SCO packets can be transmitted without
polling by the sending unit. ACL links support both symmetric and assymetric
transmissions.
Bandwidth is controlled by the master unit, which determines how much of
the total each slave unit can use. Slaves cannot transmit data until they have
 been polled by the master, and the master can broadcast messages to the
slave units via ACL link.

Network arrangement:
Bluetooth network arrangements (topology) can be either point-to-point or
point-to-multipoint. Any unit in a piconet can establish a connection to another
piconet to form a scatternet. See the figure, which diagrams a scatternet in
which piconet A, which consists of four units, is connected to piconet B,
consisting of two units. Note that the master unit of A is not the link Bluetooth
network arrangements (topology) can between the two piconets.

Error correction and security:

on code (FEC), 2/3 rate forward error correction code FEC, and automatic
repeat request (ARQ). The FEC methods are designed to reduce the number
of retransmissions. However, the over hea Three error correction techniques
have been defined: 1/3 rate forward error corrected significantly slows
transmissions, so is generally not used in relatively error-free environments,
with the exception of packet headers. The ARQ scheme requires that the
header error and cyclic redundancy checks are okay. When they are, an
acknowledge is sent. When they aren't, the data is resent.
Security is provided in three ways: through pseudo-random frequency band
hops, authentication, and encryption. Frequency band hops make it difficult
for anyone to eavesdrop. Authentication allows a user to control connectivity
to only devices specified. Encryption uses secret key lengths of 1, 40, and 64
bits. The quality of security is excellent for most applications. However, it is
not the highest level available, and for those users who require it, the
suggestion is to investigate separate network transfer protocols and security
software.

Connection Protocol

Bluetooth connections are established via the following techniques:

1. Standby: Devices not connected in a piconet are in standby mode. In this
mode, they listen for messages every 1.28 seconds over 32 hop
frequencies (fewer in Japan, Spain, and France).
2. Page/Inquiry: If a device wishes to make a connection with another
device, it sends out a page message, if the address is known, or an
inquiry followed by a page message, if it is unknown. The master unit
sends out 16 identical page messages on 16 hop frequencies to the slave
unit. If there is no response, the master retransmits on the other 16 hop
 frequencies. The inquiry method requires an extra response from the slave
unit, since the MAC address is unknown to the master unit.
3. Active: Data transmission occurs.
4. Hold: When either the master or slave wishes, a hold mode can be
established, during which no data is transmitted. The purpose of this is to
conserve power. Otherwise, there is a constant data exchange. A typical
reason for going into hold mode is the connection of several piconets.
5. Sniff: The sniff mode, applicable only to slave units, is for power
conservation, though not at as reduced a level as hold. During this mode,
the slave does not take an active role in the piconet, but listens at a
reduced level. This is usually a programmable setting.
6. Park: Park mode is a more reduced level of activity than the hold mode.
During it, the slave is synchronized to the piconet, thus not requiring full
reactivation, but is not part of the traffic. In this state, they do not have
MAC addresses, but only listen enough to keep their synchronization with
the master and check for broadcast messages.

USAGE MODEL:

While the Bluetooth * usage model is based on connecting devices together, it is

focused on three broad categories: voice/data access points, peripheral
interconnects, and Personal Area Networking (PAN).
Voice/Data Access Points:

Voice/data access points is one of the key initial usage models and involves
connecting a computing device to a communicating device via a secure wireless
link (see Figure 1). For example, a mobile computer equipped with Bluetooth
technology could link to a mobile phone that uses Bluetooth technology to
connect to the Internet to access e-mail. The mobile phone acts as a personal
access point. Even more ideal, the notebook can connect to the Internet while
the cell phone is being carried in a briefcase or purse. The Bluetooth usage
model also envisions public data access points in the future. Imagine the current
data-equipped pay phones in airports being
upgraded with Bluetooth modems. This would allow any mobile device equipped
with Bluetooth technology to easily connect to the Internet while located within
ten meters of that access point. These access points could, of course, support
much higher data rates than today’s modems, as public spaces could connect a
variety of private Bluetooth access points via a LAN that is routed to the Internet
over a DSL line, allowing each access point a private 1Mbps connection to the
Internet.
Peripheral Interconnects :

The second category of uses, peripheral interconnects, involves connecting

other devices together as shown in Figure 2. Imagine standard keyboards, mice,
and joysticks that work over a wireless link. The Bluetooth link is built into the
mobile computer; therefore, the cost of the peripheral device is less because an
access point is not needed. Additionally, many of these devices can be used in
multiple markets. For example, a Bluetooth headset used in the office could be
connected to a Bluetooth access point that provides access to the office phone
and multi- media functions of the mobile computer. When mobile, the same
headset could be used to interface with the cellular phone (which can now
remain in a
briefcase or purse).Another aspect of a short-range link like Bluetooth is in the
area of proximity security devices. In this case, if one device is not within range
of another device, the first device will go into a high security mode.
Personal Area Networking:

The last usage model, Personal Area Networking (PAN), focuses on the ad-hoc
formation and breakdown of personal networks(see Figure 3). Imagine meeting
someone in an airport and quickly and securely exchanging documents by
establishing a private piconet. In the future, Bluetooth kiosks could provide
access to electronic media that could be quickly downloaded for later access on
the mobile device.

Bluetooth Special Interest group (SIG)

 Bluetooth special group is group of companies working together to define,
developed promote an open royalty free specification for seamless wireless
connectivity and cable replacement for a wide variety of mobility-enhancing
devices. The original charter of the SIG is to monitor the technical development
of a short range radio and to create an open global standard. It prevent the
technology from becoming the property of any single company.

In developing the Bluetooth specification, the SIG is strictly adhering to

some basic principles that that can be summed up in five key words: freedom,
security, simplicity, versatility and reliability. These keywords are the foundation
of Bluetooth technology. To be Bluetooth certified, a device must pass
interoperability testing by the Bluetooth Special Interest Group thus assuring that
products meeting the specification will be able to interact with all other
Bluetooth-certified products and with the Internet.

In february1998, the Special Interest Group (SIG) was formed. The founding
SIG member are Ericsson, Intel, IBM, Nokia & Toshiba. Since then over 2000
adopter have joined including Compaq, Lucent, Motorola and 3com.

Bluetooth Characteristics:

These are the features of the Bluetooth technology:

● It separates the frequency band into hops. This spread spectrum is used
to hop from one channel to another, which adds a strong layer of security.
● Up to eight devices can be networked in a piconet.
● Signals can be transmitted through walls and briefcases, thus eliminating
the need for line-of-sight.
● Devices do not need to be pointed at each other, as signals are
omni-directional.
● Both synchronous and asynchronous applications are supported, making it
easy to implement on a variety of devices and for a variety of services,
such as voice and Internet.
 ● Governments worldwide regulate it, so it is possible to utilize the same
standard wherever one travels.

COMPETING TECHNOLOGIES

While there is no single competing technology that covers the entire

concept of Bluetooth wireless technology, in certain market segment other
technology do exist.

IrDA

For cable replacement, the infrared standard IrDA has been around for
several years and is quite widespread. Most new portable PCs, PDAs, and some
cellular phones support IrDA, although actual adoption by users has been rather
limited. IrDA is faster than Bluetooth but is limited to point to point connections,
Whereas Bluetooth is also capable to point to multi point. IrDA’s biggest draw
back is that it requires a clear line to sight, and is usually limited to a few feet
between devices.

Wireless LAN:
 Wireless LAN based on the IEEE 802.11b standard are used to replace a
wired LAN throughout a building. The transmission capacity is high and so is the
number of simultaneous users. However, compared to Bluetooth, these wireless
LANs are more expensive, consume more power and have a larger hardware
footprint, making them unsuitable for small mobile devices.
 Bluetooth in the Future

What is the future direction of the Bluetooth standard?

At this time, we anticipate the Bluetooth SIG to evolve the Bluetooth technology
to provide greater bandwidth & distances, thus increasing the potential platforms
& applications used in the emerging personal area-networking marketplace.

What is the future of Bluetooth?

Bluetooth is a continually expanding technology. There are plans to add many

new application profiles. With over 1800 companies working on Bluetooth, the
future could not be brighter. With a strong special interest group behind
Bluetooth, the standardization of the application profiles is almost assured.
According to market researchers, Cahners In-Stat Group, it is anticipated that as
many as 670 million products will have Bluetooth built-in by the year 2005.

Will the speed of Bluetooth increase?

Some members of the Bluetooth SIG such as Sony & Eastman Kodak are
interested in seeing the speed of Bluetooth increasing for applications such as
streaming video. Proposals are under consideration but it is not clear when
products based on any of the proposals would be available
 Projected Market Growth:

Cahners In-Stat group estimates that the Bluetooth market will grow from virtually
zero in 1999 to over 1 billion Bluetooth-enabled devices that will
ship in 2005.
 ADVANTAGES OF BLUETOOTH TECHNOLOGY:
1.No line of site restrictions as with IrDA.

2. Low power consumption makes integrated in battery powered devices

very practical.

3. 2.4 GHz radio frequency ensures worldwide operability.

4. Tremendous momentum not only within the computer industry

but other industries like cellular telephones and transportation.
 APPLICATIONS:

Smart Home

Homes equipped with Bluetooth devices may be able to recognise the arrival of
its bonafide residents and unlock the door on their arrival. The device will also
adjust heat to a preset temperature. While this is happening, the data from the
individual’s PDA may be exchanged with the home electronic board, and the
family calendar is updated
to reflect the scheduled activities in the office.

The Internet Bridge

An extension of this model could be a mobile computer that allows surfing the
Internet irrespective of the location of the user, and regardless of whether the
user is cordlessly connected through a mobile phone (cellular) or through a wire
line connection (e.g. PSTN, ISDN, LAN, xDSL).

Automatic Check-in:
●
Hotels are testing, or plan to test, services that allow guests to check in, unlock
room doors and even control room temperature with handheld devices equipped
with Bluetooth Technology.
●
The Bluetooth enabled mobile phone or the PDA can present the electronic ticket
to the airline system without one having to go through the queue at the check-in
counters. The airline's on-line system performs the identification via the ID-tag
feature built into the mobile phone or the PDA and confirms the reserved seat.
The Three-in-one Phone
With Bluetooth support, one handset will be able to provide multiple
functionality. When at home, the phone functions as a cordless phone, connected
to the fixed line. When on the move, it functions as a mobile phone connected to
the mobile network. Additionally, when the phone comes within range of another
mobile phone with built-in Bluetooth technology, it functions as a walkie-talkie.

References :

1. The official Bluetooth site,http:/www.bluetooth.com

2. http://www.intel.com/mobile/bluetooth

3. The wireless connectivity Technologies Comparison, Infrared and

Radio Frequency, Infrared Data Association, September 1998.