Scribd Logo
Upload

Welcome to Scribd!

  • 1 views

    DTS_AC0090H3400K2H_ENG

    Uploaded by

    Sreeraj P N

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    DTS_AC0090H3400K2H_ENG

    Uploaded by

    Sreeraj P N
    1 views10 pages

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    1 views10 pages

    DTS_AC0090H3400K2H_ENG

    Uploaded by

    Sreeraj P N

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 10

    ACCESSORIES FOR AXIAL PRESSING SYSTEMS

    AC0090H3400K2H
    Fixing bracket for
    L-shape radiator tubes
    SCHEDA TECNICA

    Fixing bracket for


    AC0090H3400K2H L-shape radiator tubes

    DETAILS

    1 Anchor Bolts Zinc plated steel

    2 Fixing washers Zinc plated steel

    3 Washer (Vibration and noise reduction) Plastic PA6

    4 Bracket Zinc plated steel

    5 Support (Vibration and noise reduction) Plastic PA6

    6 Gusset Plastic

    2
    ADVANTAGES
    Noise reduction

    Vibration reduction

    Stable and safe floor fixing

    Fix center distance of 50 mm

    COMPATIBILITY
    The bracket is compatible with General Fittings article 3400.K2 (L-shape radiator tubes and specifically with
    the codes:

    CODE SIZE THICKNESS

    3400K2I161500A 16x15/250 2.2 steel pipe

    3400K2I161510A 16x15/1000 2.2 steel pipe

    3400K2N161500A 16x15/250 2.2 copper pipe

    3400K2N161550A 16x15/500 2.2 copper pipe

    3400K2N161510A 16x15/1000 2.2 copper pipe

    3400K2N201500A 20x15/250 2.8 copper pipe

    Also, for connection purposes, it can be used with the following items:

    - 7E00H4N051500A (NICKEL PLATED EUROKONUS ADAPTER FOR COPPER AND STEEL PIPE)

    - 5700H4N051500A (NICKEL-PLATED NUT WITH RING AND GASKET FOR COPPER PIPE)

    3
    SCHEDA TECNICA

    ASSEMBLY

    Insert the noise reduction support into the bracket.

    Fasten the noise reduction washer to the seat on the


    support in order to lock the three elements
    in a single block.

    Fit the L-shape radiator tube 3400.K2 to the bracket.

    4
    Cut the copper / steel tubes perpendicularly to
    the desired length, paying attention to the part
    of the tube that fits into the Eurocone seat of the
    H valve.

    Detail of the tube cutting area.


    The cut of the tube must be perpendicular and
    must not have burrs.

    Insert the connection kits 5700H4N051500A (for


    copper pipe) or 7E00H4N051500A (for copper
    / steel pipe) on the pipes and 3400.K2 items in
    the Eurcone seats of the H valve.

    5
    SCHEDA TECNICA

    Manually screw the connection kits and mark


    the fixing point of the bracket with a pencil or
    marker.

    Unscrew the connection kit, remove the pipes


    and drill the fixing hole of the floor bracket.
    Insert the gusset into the hole made in the floor.

    Engage the 3400.K2 items again in the


    Eurocone seats of the H valve and manually
    tighten the kits 5700H4N051500A or
    7E00H4N051500A.
    Then screw the anchor bolt to the gusset (taking
    care to put the fixing washer on).

    6
    Fix the connection kits 7E00H4N051500A or
    5700H4N051500A according to the instructions
    in their technical data sheets.

    Connect to the circuit according to the


    procedure indicated in the technical data sheet
    of 3400 range.

    7
    SCHEDA TECNICA

    Detail of the completed connection (concealed).

    Detail of the completed connection (visible).

    8
    9
    General Fittings Spa
    Via Golgi, 73/75
    25064 Gussago (BS) ITALY
    Tel. +39 030 3739017
    P.IVA 03448140172 - C.F. 01613110178
    www.generalfittings.it

    You might also like