RAMAXEL Part-Number Decoder
RAMAXEL Part-Number Decoder
◆DESCRIPTION
The Ramaxel RMT3150ED58E8W-1600 memory module family are low profile Unbuffered SODIMM
modules with 30.00mm height based DDR3 technology. DIMMs are available as No-ECC (x64) modules.
The module family based on 8(x64) x8 DDR3 DRAM components, and the DIMMs feature serial presence
detect based on a serial EEPROM device.
◆FEATURE
● 204-pin Dual-in-line DDR3 memory module.
● JEDEC Standard with 1.5 V (±0.075 V) power supply
● 1 Rank Organizations based x8 DDR3 DRAM components
● Fast data transfer rates: PC3-12800
● Differential data strobe (DQS, DQS#) option
● Differential clock inputs (CK,CK#)
● Commands entered on each rising CK edge
● Eight-bit pre-fetch architecture
● DQS edge-aligned with data for READs
● DQS center-aligned with data for WRITEs
● DLL to align DQ and DQS transitions with CK
● Data mask (DM) for masking write data
● Programmable burst lengths: 4 or 8
● Adjustable data-output drive strength
● Concurrent auto pre-charge option is supported
● Auto Refresh (CBR) and Self Refresh Mode
● ZQ calibration
● On-die termination (ODT)
● Serial Presence Detect (SPD) with EEPROM
● Gold edge contacts
● For contact pads, electrolytic gold plating 0.38 micrometer minimum.
● Halogen-free
R M T 315 0 E D 58 E 8 W- 1600
Ramaxel Module
DRAM Density:
18: 128Mb (16M*8b)
28: 256Mb (32M*8b)
38: 512Mb (64M*8b)
48: 1Gb (128M*8b)
58: 2Gb (256M*8b)
◆ FUNCTIONAL DESCRIPTION
◆BLOCK DIAGRAM
Note: Operating Temperature TOPER is the case surface temperature on the center / top side of the DRAM for measurement
conditions.