TUBE COLD FORMING
SELECTION GUIDE
FOR TUBE & BAR
CONDAT: CONDATUB Range
An extensive product range covering Taking advantage of its expertise in cold drawing and cold forming,
all applications* CONDAT offers an extensive range of products including surface
CONDAT develops, manufactures, and markets a global treatments, water soluble concentrates, drawing oils, pastes,
offer for Hot and Cold forming of Tubes, including rolling, forming gels and rust protection products to fulfill the requirements
drawing, and corrosion protection for all materials. of its customers.
Taking advantage of its expertise in metal die casting, wire drawing The lubricants of the range « metal cold forming » assist in the
and metal working, CONDAT has developed innovative speciality following processes : rolled & welded tubes, pilger drawing, single
lubricants under the brand name CONDATUB, COLLUBE, VICAFIL and double pass drawing, forming, profiling…including anti rust
and CONDAPROTECT. protection.
* The list of lubricants below is not exhaustive but only an extract of our range.
Please contact us for further information.
SOLUBLES & SOAPS FOR COLD FORMING
Carbon Galvanised Stainless Copper Aluminum
Zirconium
Steel Steel Steel & Alloys & Alloys
ROLLED & WELDED
CONDATUB SL 498 • • • • Outstanding bio-stability and clean to use (High detergency).
Solubles
CONDATUB SL 500 • • • Soluble bringing enhanced anti corrosion protection.
VICAFIL T474 F2A
Pilger Roller forming of zirconium tubes (for nuclear appli-
CONDATUB SP • • cations).
Solubles
474 F2A
PILGER ROLLING
Versatile soluble for pilger roller forming fo Copper/ Copper
CONDATUB SL 715 • • • alloys as well as zirconium (intermediate & final passes).
CONDATUB
Oils
• • Lubricant for final processes and specifid surface finish.
TFH 1158
Please refer to our complementary additives range to help you manage your lubricant lifetime and performance.
COMMITTED TO RESPONSIBLE PERFORMANCE
TUBE COLD FORMING
SELECTION GUIDE
FOR TUBE & BAR
SURFACE TREATMENTS & LUBRICANTS
FOR DRAWING AND FORMING
Carbon Stainless Copper & Aluminum
Zirconium
Steel Steel Alloys & Alloys
Polymers
SUPRALUB 35 • • • • • Self-lubricanting coating based on polymers and soaps.
TREATMENTS
SURFACE
Salt-based with crystallized aspect. Very low moisture
VICAFIL TS 4445 W • pick-up (low borax formulation).
Salts
VICAFIL TS 7853 • Economical salt-based coating with crystallized aspect.
Reactive Soaps
COLLUBE 55 - 551 • • Reactive soap for drawing after phosphating.
CONDATUB TFH 1684 Drawing of bars & tubes,incl. Phosphated steel. Semi-syn-
- TFH 81 • • thetic oil with no residues after thermic treatment.
DRAWING
VICAFIL TFH 1218 -
TFH 1167 - TFH 1058 • • Versatile semi-synthetic oils for drawing
Neat Oils
VICAFIL TFH 386 - TFH Synthetic oil with no residues after thermic treatment -
4002 • • Medium viscosity.
VICAFIL TFH 920 - TFH
Heavy duty drawing oils (EP additives) with varying
4065 - TFH 4321 - • viscosities.
TFH 4557 - TFH HCB
VICAFIL TFH 486 - TFG
4295 • Heavy duty grease for heavy reduction / Large diameters
Gels & Greases
CONDAFORM Tube forming. Bending gel with high adhesion and easy to
FORMING
BG 1636 • • • • clean / remove residues.
Tube forming. Soluble paste with high lubricity and easy to
VICAFIL SP 1172 • • clean / remove residues.
Viscous grease (without EP addtives) for non-ferrous
VICAFIL TFG 4298 • • material forming.
Specific applications such as tube drawing for brass or copper alloys, require paste lubricants in order to avoid cross contamination
between inner and outer lubricants, as the same product can be used in both pure and diluted form.
R0520
CONDAT - 104 Avenue Frédéric Mistral - 38 670 Chasse-sur-Rhône - France
Tel. 33 (0)4 78 07 38 38 - Fax 33 (0)4 78 07 38 00 -
[email protected] - www.condat.fr
