1

1
Copyright © 2013 Foxit® Corporation. All Rights Reserved.
No part of this document can be reproduced, transferred, distributed or stored
in any format without the prior written permission of Foxit.

Anti-Grain Geometry - Version 2.3

Copyright (C) 2002-2005 Maxim Shemanarev (http://www.antigrain.com)
Permission to copy, use, modify, sell and distribute this software is granted
provided this copyright notice appears in all copies. This software is provided
"as is" without express or implied warranty, and with no claim as to its suitability
for any purpose.

2
Contents
Chapter 1 – Overview ........................................................... 5
PDF Document Concepts .................................................................. 5
Why Advanced Editor ...................................................................... 6
PDF Document Copyrights Issue ....................................................... 6
Updating Advanced Editor ................................................................ 6
Chapter 2 – Getting Started .................................................. 7
Installing Advanced Editor ................................................................ 7
Registering Advanced Editor ........................................................... 12
Uninstalling Advanced Editor .......................................................... 13
Work Area ................................................................................... 13
Customizing the Work Area ............................................................ 15
Chapter 3 – Using Advanced Editor .................................... 23
Launching Advanced Editor ............................................................ 23
Opening PDF Documents................................................................ 23
Viewing PDF Documents ................................................................ 24
Creating PDF Documents ............................................................... 25
Undoing and Redoing .................................................................... 27
Saving PDF Documents.................................................................. 27
Rollback Saving ............................................................................ 28
Closing PDF Documents ................................................................. 28
Setting Options ............................................................................ 28
Selecting Objects .......................................................................... 35
Editing Objects ............................................................................. 36
Modifying Objects ......................................................................... 42
Inserting New Objects ................................................................... 52
Object Properties .......................................................................... 56
Editing Page Layout ...................................................................... 63
Modifying Pages ........................................................................... 64
Using Rulers and Grids .................................................................. 64
Chapter 4 – Working with Pages ........................................ 67
About Page Toolbar ....................................................................... 67
Setting Page Options ..................................................................... 67
Inserting Blank Pages .................................................................... 68
Importing and Exporting Pages ....................................................... 68
Deleting Pages ............................................................................. 70
To resize a page ........................................................................... 73
To clip a page content ................................................................... 74
To rotate a page ........................................................................... 75
Chapter 5 – Working on Text Objects ................................. 77
About Text Toolbar ........................................................................ 77
To Use Graphics Keyboard .................................................................................... 77

3
 To Merge Text ............................................................................................................. 78
To Split Text ................................................................................................................ 79
To Import Windows Fonts ...................................................................................... 80
To Convert Selected Text to Path ....................................................................... 80
Finding Text ................................................................................. 81
Setting Text Options ...................................................................... 81
Selecting Text Mode ...................................................................... 82
Inserting New Text ........................................................................ 82
Editing Text Objects ...................................................................... 84
Chapter 6 – Working on Image Objects .............................. 87
Selecting Image Mode ................................................................... 87
Insert New Image ......................................................................... 87
About the Image Editor ................................................................. 89
Replacing an Image ...................................................................... 90
Saving Images ............................................................................. 91
Zooming Images .......................................................................... 91
Using the Toolbox ......................................................................... 91
Using Filters ................................................................................. 99
Using the Function Palette .............................................................. 99
Using the Layer Palette ................................................................. 100
Using the Color Palette ................................................................. 100
Using the Histogram Palette .......................................................... 101
Quit Image Editor ........................................................................ 102
Chapter 7 – Working on Graphics Objects ........................ 103
Setting Graphics Options .............................................................. 103
Selecting Graphics Mode ............................................................... 103
Inserting New Graphic Objects ....................................................... 104
Changing Graphics Properties ........................................................ 106
About the Graphics Editor ............................................................. 109
Drawing Graphics ........................................................................ 110
Editing Graphics .......................................................................... 111
Quit Graphics Editor ..................................................................... 113
Chapter 8 – Working on Shading Objects ......................... 114
Selecting Shading Mode ................................................................ 114
Inserting New Shading ................................................................. 114
Drawing New Shading .................................................................. 118
Linear shading ......................................................................................................... 118
Radial shading ......................................................................................................... 120
Editing a Shading ........................................................................ 123
Quit Shading Editor window .......................................................... 125
Keyboard Shortcuts .......................................................... 127
Contact Us ........................................................................ 129

4
Chapter 1 – Overview

Foxit® PhantomPDF™ Advanced Editor (“Advanced Editor”) extends the

usability of PDF documents by enabling the user to edit PDF files in a What You
See Is What You Get (WYSIWYG) way. Advanced Editor is proud to be the first,
and up to the time when this manual was printed, the only PDF Editor that
allows you to modify existing PDF documents in an easy and efficient way, yet
retain all rich features for viewing and printing provided by PDF document
format.

Advanced Editor is a revolutionary program in editing PDF files. Its goal is to

give the user a friendly editing interface and make the user feel that they are
editing a common document, like with a common editor. Advanced Editor offers
the user flexibility to modify or customize anything in the page contents of a PDF
file.

PDF Document Concepts

PDF stands for Portable Document Format, which can be used to exchange and
distribute documents in a manner independent of the application software,
hardware, and operating system used to create it.

A PDF document contains one or more pages. Each page in the document may
comprise a sequence of objects. An object can be a text object which contains
a number of text characters, a graph object which contains straight lines,
rectangles, and cubic curves, an image object which is made of a set of colored
pixels, or a shading object which contains a smooth transition between colors
across an area.

Each object contains a series of attributes that determine what the object looks
like. Text Objects use fonts to specify how the characters look, and font sizes
to specify how large those characters are. Graph objects have attributes like
line width, and fill type and more. Shading objects offers linear and radial
gradients. All objects have common attributes like position, size, and
orientation. There are many more attributes defined for PDF page objects,
please refer to the following chapters for a detailed explanation of all object
attributes.

5
Why Advanced Editor

Edit PDF documents directly! As PDF becomes more important in the field of
document publishing, there is an increasing need to use and edit PDF
documents.

This demand had led to the conversion of PDF to other types of files, such as
Microsoft Word file. However, this however usually causes data or format loss
during the conversion process. Furthermore, PDF files are converted into other
types of files and then converted back. Often, things have been changed during
the double conversion. Hence users have to almost rebuild the whole document
structure frequently.

What if there is a way to edit PDF documents directly that is reliable and easy to
use? The answer is Advanced Editor, the first and only REAL editor for PDF files.

PDF Document Copyrights Issue

Many PDF documents come with copyrights reserved by the author, or owner of
the intellectual property. And in many cases the owner of copyrights may
prohibit anyone else to alter the document in any way.

Advanced Editor by no means is designed to breach those copyrights. However,

it’s up to the users of Advanced Editor to observe the copyright, if the document
is not protected in any technical way.

With Advanced Editor, you are able to edit any user password protected
documents. But you can only Save As the document if you have no password. If
a document is not protected by password but is encrypted with modification
permission prohibited, it cannot be edited by Advanced Editor.

Updating Advanced Editor

Checking for updates detects new versions of Advanced Editor and keeps you
updated with the latest release. You can detect updates from the Help menu on
Foxit® PhantomPDF™ Business 5.1.

 Choose Help > Check for Updates Now…

 If there is an update for Advanced Editor for you, select “Advanced Editor”
from the column on the left, and click Add to move it to the right column.
 Click Install.

6
Chapter 2 – Getting Started

This section gives you an overview of Advanced Editor 5.1, including system
requirement, installation, registration, work area, un-installation, etc.

Installing Advanced Editor

Windows System Requirements

Advanced Editor runs successfully on:

 Windows 2000
 Windows XP
 Windows Server 2003
 Windows Vista
 Windows 7

How to Install?

Step One – Download the Package

Foxit® PhantomPDF™ Business is distributed via web download. Firstly, you

should download and install Foxit PhantomPDF Business, and then click
“Advanced Editor” to run Foxit PhantomPDF Advanced Editor immediately.

Step Two – Installing the Software

After running the Foxit PhantomPDF Business setup program, you will need to
execute the following steps to finish setup:

1. Welcome Screen – Click Next button to continue, and click Cancel button
to abort the setup.

7
2. License Agreement – Only after you check the box of “I accept the terms
in the License Agreement”, you can click Next button to continue.

3. Choose Setup Type – Choose the setup type that best suits your needs.

8
 Complete – Installs all program features. It will expressly finish Foxit
PhantomPDF Business Setup, also requires the most disk space.

 Custom – Allows you to choose which program features can be installed

and where to install. The default location is: C:\Program Files\Foxit
Software\Foxit PhantomPDF\. Following are steps you will go through:

a) Choose the features you don’t want to install in the left box. You can

choose the feature unavailable button from the drop down list of

the related features.

9
 b) Click Browse… button to change the location where you want to install
software.
c) Click Next button to continue the setup

4. Select additional tasks.

5. RMS Server configuration (Optional) – Input the server name you want
to connect, you can skip and configure it later if needed.

10
6. Click Install button to start.

7. Complete

11
Click the Finish button to complete installation, do one of the following to run
Advanced Editor:

 There are two product icons displaying on the desktop. Please click the one
named “Foxit PhantomPDF Advanced Editor” to run the program.

 Go to the installed location and open “Advanced Editor” folder, then click
“Advanced Editor.exe” to run Foxit PhantomPDF Advanced Editor.

 Choose Tools > Modify Content in Foxit PhantomPDF Business to run

Advanced Editor and then modify the PDF document.

Registering Advanced Editor

Installing the registration key:

 Save the key file (fpmkey.txt) into the directory where you installed Foxit®
PhantomPDF™ Business.
 Run Foxit PhantomPDF Business > Help > Activation, choose the way of
“Install the PhantomPDF License Key” to active. Click Next, then copy and
paste all contents from the key file into the registration box. Click Install
the key to complete.

Activating Key:

 Run Foxit PhantomPDF Business > Help > Activation, choose “Activate the
PhantomPDF” to active. Click Next, and input the registration key into the
entries.
12
Note:

 To check if you have registered successfully, please go to “Help” > “About

Foxit PhantomPDF Advanced Editor” and see if your name is shown at the
bottom left corner.
 You have 30 trial days. When your evaluation license expires, you can keep
using Advanced Editor’s functions, however, there will be evaluation marks
on the top right corner of the document.
 After registering successfully, you can remove all the evaluation marks
which are added by Advanced Editor at one time before you purchase it. To
remove all the evaluation marks, please select “Help” > “Remove Evaluation
Marks” in Advanced Editor or Foxit PhantomPDF Business.

Uninstalling Advanced Editor

Advanced Editor will be removed once you uninstall Foxit® PhantomPDF™

Business. To uninstall, please do one of the following:

 Click Start > All Program Files, and find Foxit PhantomPDF, and last
click Uninstall.
 Select Control Panel > Delete or Add Program, and then select Foxit
PhantomPDF Business to uninstall.
 Find the PhantomPDF installation directory named “Foxit PhantomPDF”, and
then select Uninstall.

Work Area

Advanced Editor workspace consists of the main application window (see

Figure2-1) where by default contains the Title bar, Menu bar, Tool bar, and
areas called Document Pane, Properties Pane, Bookmark Pane and Status bar.
There is also an Image Editor (see Figure2-2), Graphic Editor (see Figure2-3),
Shading Editor (see Figure2-4) and Layout Editor (see Figure2-5) and where
you can edit images, modify graphics, create or edit a shading object, and
design page layout.

13
Figure2-1: The Document window

Figure2-2: The Image Editor window

Figure2-3: The Graphic Editor Window

14
Figure2-4: The Shading Editor Window

Figure2-5: The Page Layout Editor Window

Customizing the Work Area

As you get acquainted with Advanced Editor, you can set up your Editor work
environment. The more you learn about its potential, the more you can take
advantage of its features, tools, and options.

About Title Bar

The Title bar displays the name of program itself and the file name of a
document currently displayed in the Document pane.

15
About Menu Bar

The Menu bar provides full access to the functions of the Advanced Editor. You
can access the menu by either using the mouse or keyboard. Keyboard
shortcuts, when available, are printed on the right of the menu item.

About Toolbars

In addition to menu commands, you can access several features using toolbar
buttons. When you point to a button, the "Ready" on the left side of Status bar
can synchronously report action for you.

The toolbar can be repositioned, you can move the toolbar to the top area, or
you can drag the toolbar into the document pane to create a floating toolbar. You
can drag the bar back to its original position.

The following briefly describes each toolbar and its default buttons

A B C D E

F G

A. Main Toolbar B. Edit Toolbar C. Zoom Toolbar D. Page Toolbar E.

Text Toolbar F. Object Toolbar G. Find Text Tool

Main Toolbar: Use the main file tools to create a new page, open, save, or print
a PDF document.

Edit Toolbar: Use the edit tools to cut, copy, and paste object in a PDF
document, and to undo and redo changes that you might have made to a PDF
file.

Zoom Toolbar: It helps you adjust the view of your PDF documents, and it
included simple tools as Zoom In and Zoom Out.

Page Toolbar: These tools allow you to navigate the pages in a PDF document

16
(forward and backward) by jumping to the first or last page in a document, lay
out a page design, or to insert or delete a page.

Text Toolbar: These tools allow you to input graphics keyboard, merge or split
text, remove font kerning, and import Windows fonts.

Object Toolbar: Use the object tools to edit, rotate, delete selected objects,
add text, graphic, image or shading objects, or create new images for the
document. You can select a type of object mode to edit the object.

Search Text Tool: This allows searching of text in PDF files and highlight the
matching text.

About Status Bar

The Status Bar reports the current cursor actions. It also allows you to navigate
one page at a time, jump to the first or last page, go to a specified page number,
set the page view magnification, and toggle showing/viewing of annotations
through the “Show Comments” checkbox.

Navigation Tools Viewing Annotations View magnification

The Document Window

The Document Pane is the main area for viewing the document and editing the
page contents. You can use the toolbars and Properties pane to work with the
document. You can use the navigation toolbar to page through a document, use
zoom tool to magnify or reduce a view, and use scroll bar to scroll up or down a
page. Within a page, you can also drag selected object(s) to any location you
want. When you drag an object, the cursor will change to a hand.

In addition, you can also use the Context Menu to work in the document pane.
Simply right-click anywhere in a page and the Context Menu will pop up at once.

The Properties Pane

The Properties pane provides easy access to the tools without cluttering your
workspace. The Properties pane can include one or more tabs, each containing
common attributes. For example, the Text tab can include attributes common to

17
texts, the Image tab can include attributes common to images, the Path tab can
include attributes common to graphics, and the General tab can include
attributes common to all the above objects.

A B C D E F

Object Properties Name List Object Properties Value List

As you select a type of object in the Document pane, a corresponding object tab
will appear in the Properties pane. For example, you select a text object, and a
Text tab will appear. If you select more than one type of objects, a General tab
which includes common attributes will appear too. For example, you select a
text and an image object, and then the Text tab, the Image tab and the General
tab will be presented at the same time in the Properties pane.

A. Page Tab: This tab only applies to layout edit mode. When your screen is
switched to the Layout Editor window, this tab will be activated for work.

B. Text Tab: When a text object is selected in the Document pane, this Text tab
will appear in the Properties pane including all properties that apply to the
selected object.

C. Path Tab: When a graphic object is selected in the Document pane, this Path
tab will appear in the Properties pane including all properties that apply to the
selected object.

D. Image Tab: When an image object is selected in the Document pane, this
Image tab will appear in the Properties pane including all properties that apply

18
to the selected object.

E. General Tab: When more than one type of objects is selected in the
Document pane, this General tab will appear in the Properties pane containing
all properties that are common to all the selected objects.

F. Shading Tab: When a shading object is selected in the document page, this
Shading tab will appear in the Properties pane containing all properties that
apply to the selected object.

To show or hide Properties pane, do one of the following:

 Choose View > Property List.

 Right-click the mouse on the page, and choose Property List in the context
menu.

 Click the button at the top right corner of the Properties pane to close it.

The Bookmark Pane

The Bookmark Pane is the navigation tool that makes your PDF files easier to
view and edit. In Advanced Editor, the bookmarks provide interactive links to a
specific destination.

Navigating with bookmarks is an efficient way of linking to target locations. To

jump to a topic of interest, click the corresponding bookmark.

1. To show or hide Bookmark pane, do one of the following:

 Choose View > Bookmark.

 Right-click the mouse on the page, and choose Bookmark in the context
menu.

 Click the button at the top right corner of the Bookmark pane to

close bookmark.

Note: The Bookmark pane is opened by default. If you wish to hide the
bookmark pane, click Edit > Options > Others, and check “Do not show
Bookmark as launching Advanced Editor”.

2. To jump to a topic, click the bookmark. Click the plus (+) or minus
(-)sign to expand or collapse the bookmark contents.

19
 Bookmark Pane

Adjusting Bookmark and Properties Pane

1. The Bookmark Pane and Properties Pane are docked separately in the left
and right of the page.

Docking Panes

 Float the Bookmark pane or Properties pane by clicking and dragging

the title bar into the document area.
 Move a floating pane by dragging its title bar to another location.
 Adjust the view area of the panes by dragging their borders to adjust
20
 the width.
 Dock a floating pane, or float a docking pane by double-clicking its title
bar.

Floating Panes

2. Advanced Editor allows users to combine the Bookmark Pane and the
Properties Pane into one pane. The panes become tabs in one combined
pane, and clicking on the corresponding tab shows the corresponding
information.

 Click one pane’s title bar, and drag into another pane until the borders
overlap.

The Borders

Dragging one pane to another

21
 Borders overlap In one panel

 Also, if the panes are in one panel, you can click the tab and drag to
separate them into two panes and move them in the different positions.

22
Chapter 3 – Using Advanced
Editor

This section gives a short overview on how to get started using Advanced Editor.
Use this section to learn how to launch Advanced Editor, to open documents,
and to perform common editing operations.

Launching Advanced Editor

From the Programs Group

 Click on Windows “start” button, select “All Programs”, click on “Foxit®

PhantomPDF™” group, then click on “Foxit PhantomPDF Advanced Editor”
icon;

From the Desktop

 Go to your desktop, find the “Foxit PhantomPDF Advanced Editor” icon,

double click on it;

From the Installation Directory

 Go to the directory where you installed Foxit PhantomPDF Business, double

click on the “Advanced Editor.exe” icon.

From the Run command line

 Click Start, click Run, in the Open field, input the full path where Advanced
Editor locates, and then click Ok button.

Opening PDF Documents

There are several ways to load PDF documents from the Advanced Editor
application.

Using File Menu

 Select File menu from the Menu bar, and select Open command. In the Open
dialog box, select and open one or several PDF documents.
 Advanced Editor can record the reading history, and list out four PDF
23
 documents at most. So you can select one or several PDF document listed
under File menu to continue reading.

Using Open Toolbar

 In the Toolbar, click the Open button, and then in the Open dialog box,
select one or several PDF documents to open.

Using Shortcut Key

 Directly press Ctrl + O to pop up the Open dialog box, and then select one
or several PDF documents to open in this dialog box.

Using Command Line

 Enter the path for the PDF document right after “Advanced Editor.exe” in the
command line box.

The loaded PDF documents are displayed in the Document pane; you can view
and edit them.

Viewing PDF Documents

Advanced Editor provides tools that can help you navigate a PDF file and find
your way around a large document. Pages can be resized and scrolled to make
them easier to see. You can jump directly to a page number and step through a
document page by page.

Zooming in or zooming out

To magnify or reduce the view, do one of the following:

 Choose View > Zoom In or Zoom Out on Menu Bar.

 Use the keyboard shortcut Alt + + or Alt + -.

 Click the Zoom In icon or Zoom Out icon on the Toolbar.

 Select a magnification percentage in the Magnification Percentage Area

on the Status Bar, and press Enter, also

you can directly drag the buoy to zoom in or zoom out.

Navigating pages
24
To move around in multiple-page documents, do the following:

1. Going to the next or previous page

Do one of the following:

 Choose Document > Previous page or Next Page on Menu Bar.

 Use the keyboard shortcut Alt + P or Alt + N.

 Click the Previous Page icon or the Next Page icon on

Toolbar or Status Bar.

2. Going to the first or last page

Do one of the following:

 Choose Document > First Page or Last Page on Menu Bar.

 Use the keyboard shortcut Alt + T or Alt + L.

 Click the First Page icon or the Last Page icon on

Toolbar or Status Bar.

2. Going to a specific page

Do one of the following:

 Choose Document > Go to page… > input the specific page

number > OK.
 Select or input the specific page number on the Current Page

Number Box on the Status Bar, and press

Enter.
 Use the keyboard shortcut Ctrl + G.
 Select Go to page… in the right-click Context Menu.

Scrolling

 Use the scroll bars to scroll around a view in case parts of the page are not
visible.

Creating PDF Documents

Using Advanced Editor, not only can you easily create a new PDF document, but

25
you can customize the page and content size according to user’s output needs.
In the following, we briefly describe the process of creating a simple PDF
document.

To create a new blank document:

The New command lets you to create a blank document.

1. First do one of the following:

 Click the New button on the Toolbar

 Select File > New from the Menu bar
 Press Ctrl + N on the keyboard

2. If desired, on the pop-up New Page Attributes dialog box, set up the Page
Size, or click the Allow Specify Content Size button to set up the Content
Size.

Note: If you want to insert multiple pages with same settings, you can use
the Page options in the Options dialog box to set your preferences.

3. Click Ok button to produce the blank document.

To write content in the blank document

At present, Advanced Editor doesn’t support direct writing on the page. There
are several substituted ways to input contents described in the following.

 Copy -- You can copy a page or part of a page into the clipboard, then paste
into the blank document.

 Insert -- You can use the Add feature to insert text, image and graph
objects into the blank document. For information how to insert objects,
please see Inserting New Objects.

To add more pages to the new document

At present, Advanced Editor allows you to create a document starting with one
page. There is not an option for you to specify how many pages you want to
create. Therefore, if you want to make the document with more than one page,
you can use Insert Page feature to add more blank pages to the new document.

See also: Inserting Blank Pages.

26
To save the new document

Use the save command to save the document. Now, a new PDF document is
produced.

Undoing and Redoing

Advanced Editor provides chances for you to undo and redo previous actions.
You can undo and redo any type of editing (insert, delete, or change) you have
done. You can also set an option to decide the size of the undo buffer. For details,
please refer to Setting Options.

To undo previous actions, do one of the following:

 Select Edit > Undo from the Menu bar.

 Use keyboard shortcut Ctrl + Z.

To redo previous actions, do one of the following

 Select Edit > Redo from the Menu bar.

 Use keyboard shortcut Ctrl + Y.

Saving PDF Documents

In Advanced Editor, you can choose to save a modified PDF file with the same
name or use another name. When you directly save the changed file, Advanced
Editor will pop up a warning prompt asking you if you want to continue the save
operation.

To save a PDF file, use one of the following ways:

Select File > Save from the Menu bar.

 Click the Save button on the toolbar.

 Use the keyboard shortcut Ctrl + S.

To save a PDF file with another file name, do one of the following:

 Select File > Save As from the Menu bar, enter a new name for the file and
click Save.
 Use the keyboard shortcut Ctrl + Shift + S, enter a new name for the file
and click Save.

27
Rollback Saving

With Advanced Editor, you can not only undo the modification actions, also can
undo the saving actions by rollback saving.

Rollback Saving is something to make the document on your hard drive restore
to its original modified state when it is open, while keeping modifications in the
current document untouched.

To undo saving actions, do the following:

 Select File from the Menu bar, and select Rollback Saving in drop-down list.

Closing PDF Documents

To close a document while keeping the program window open, do one of the
following:

 Select File > Close from the Menu bar.

 Simply click the Close button on the Menu bar

Note: The close button on the Title bar will close the application.

Setting Options

You can use the Options dialog box in Advanced Editor to define a default page
layout, customize preferences for text objects, customize styles for graphic
objects, and specify other settings for the document.

To set options

1. Select Edit > Options from the menu bar, or press Alt + O keyboard.
2. In the Options dialog box, select one of the options from the left list.
3. Set options for that feature and then click Ok.
4. Click the “Restore Default” button to leave the settings unchanged.
5. Advanced Editor 5.1 has added a “Save as default” button for each option
tab in the Options setting box. You can click the “Save as default” button to
set the settings individually for each option as default. This will allow you to
insert pages, text, graphics or set color values with your specified settings

28
 even when reopening the Advanced Editor.

Page Options

Choose the Page Options brings up the page options dialog box (see figure
below). This controls where the inserting page will display, and allows you to
specify the page size to suit your preference.

The following options for Page can be set:

Insert Page

 Before Current Page -- The new page will always be created prior to
the current displayed page. By default, this option is checked.
 After Current Page -- The new page will always be created after the
current displayed page.

Page/Content Size

 Left margin -- Sets the distance between the left edge of the page and
the left edge of left-aligned lines.
 Bottom margin -- Sets the distance between the bottom of the page and
the bottom of the last line on the page.
 Width -- Enter dimensions for the width of the paper/content size
 Height -- Enter dimensions for the height of the paper/content size

Note: Only when you click Allow Specify Content Size, the options under
Content Size can be activated for edit.

29
Text Options

Choosing the Text option brings up the Text option dialog box (see figure below),
which allows you set your preferences for inserting text.

The following options for Text can be set:

 Font name -- Displays the font information included in a document. You

can click the Import Windows Font button to import a Windows font.

Note: If you want the imported windows font to be the default font when
you insert text every time even when reopening Advanced Editor, you
must check the option “Set as default font after being imported” and click
“Save as default” in the Other option tab. However, if you just click the
“Save as default” button in the Text option tab, the font name will be
restored to default after you exit the program.

 Font size – Sets the font size.

 Horizontal Scale – Sets how the text will be scaled in the horizontal level.
 Text mode – Specifies how the text will be filled and stroked.
 Char space -- Specifies the displacement between two characters.
 Word space --Specifies the displacement between two words.
 Line gap -- Specifies the desired spacing between lines of text.

Color Options

Choosing Color option brings up the Color option dialog box (see figure below),

30
which allows you set your color preferences for inserting text and graphics.

The default color options are RGB. If you want it to be changed to the CMYK color,
you should go to Other options tab, and check CMYK under the Color Space
Settings. And if you want to set CMYK color as default, check the Save as Default
box.

The following options for Color can be set:

 Fill Color -- The fill color is used to paint the interior of objects and text
characters that are filled. To configure the fill color, simply drag the color
adjusting bar until the color in the Preview is what you want.
 Stroke Color -- The stroke color is used to paint the border of paths and
text that are stroked. To configure the stroke color, simply drag the color
adjusting bar until the color in the Preview is what you want.

Graphics Options

Choosing the Graphics option brings up the graphics style dialog box (see figure
below), which allows you set your preferences for inserting graphics.

31
The following styles for Graphics can be set:

 Line join style -- Specifies the shape to be used at the corners of paths that
are stroked. The choices are Miter joins, Round joins and Bevel joins.
 Line cap style -- Specifies the shape to be used at the ends of open sub
paths when they are stroked. The choices are Butt end caps, Round end caps
and Projecting Square End.
 Miter limit -- Specifies the line join style; the default value is 10.
 Line Width -- specifies the thickness of the line used to stroke a path and is
measured in user space units.

See Also: Path Properties

Other Options

32
The following options are available in the Other dialog box:

Save As Default

Save all changes as default. Every time when Advanced Editor starts, it sets
these settings as default.

Buffer

 Undo Buffer Size – Here, you can increase or decrease the size of the undo
buffer. 1,000 KB is the default size and the value can be any integer between
1 and 50,000. However, you cannot undo the actions if you set the value as
0.

Object Selection Mode

Here you can select the edit type in accordance with the objects you are
modifying.

 All -- Allows you to modify any visible objects in a PDF page. (Default)
 Text only-- Allows you to modify objects only.
 Path only-- Allows you to modify graphics objects only.
 Image only-- Allows you to modify image objects only.
 Shading only– Allows you to modify image objects only.

Clipping Action when Moving Objects

Many times there are objects containing clip layer. And some clip layer may help
to construct a complete object, but some remain unnecessary. When

33
serviceable clip layer is removed from the object, in most cases, it will affect the
displaying of the object. By default, a clip object always moves along with the
object. Yet, the default setting can be changed by the Clip Action.

The following options exist to allow you to select a way to determine if the
clipping could be moved along with the object.

 Move clipping: Allows you to move the object along with clip.
 Keep clipping: Allows you to move the object but keep its clip in its original
place.

Color Space Settings

 Use Original Color Space (if supported)

“If supported” means that if the PDF file uses any of the following color
spaces: RGB, CMYK, Color Mapping, high-fidelity or multi-tone color, and
the user has checked this option, Advanced Editor will show the original
color as specified in the file. Once this box is checked, you will not able to
stroke other colors, except gray.

 Default Color Space

RGB and CMYK are the most common color systems. If you do not like using
other abstract colors, you can simply choose RGB or CMYK as your default
color space. Advanced Editor uses the RGB color system as default. If you
want to set CMYK color for the objects in your editing work, you must select
it.

Other

 Set as default font after being imported

The font you imported in the Text tab will be regarded as the default font for text
input.

 Show page setting dialog when inserting a new page

When you insert a page, a dialog box will always pop up for you to set the page
attributes. If you don’t want this dialog box to appear, simply uncheck this
option.

 Do not show Property Sheet as launching Advanced Editor

Every time Advanced Editor launches it will pop up the Property List. If you don’t
wish to display this dialog box, uncheck this option.
34
 Do not show Bookmark as launching Advanced Editor

Every time Advanced Editor launches it will pop up the Bookmark Pane. If you do
not wish to display this dialog box, uncheck this option.

 Show all comments in the PDF document

Check this option to show all comments if the opened PDF document has

annotations. Also, you can select the checkbox on the status

bar.

Selecting Objects

You can select one single object or a group of objects in a page. When (an)
object(s) is/are selected, a constantly moving dotted line and a rectangle
enabling you to resize and rotate the object (appears only when an object is
selected) will appear around it, so you can clearly identify which object(s) is/are
selected. And the object selected in the General Tab of the Properties pane will
show the number of currently selected objects, as well as other information
about selected object(s).

To select a single object

Just simply click on an object in the Document Pane to select it.

To select multiple objects

Select an object, and then hold down Ctrl key when select additional objects.

To select all objects within a page

 Choose Edit > Select All on Menu Bar to select all objects in page
 Use the keyboard shortcut Ctrl + A to select all objects in a page.

To select overlapped objects

Sometimes, there is more than one object overlapping with another object (for
example, background or foreground graph objects), and you might need to
repeat clicking to make sure the object is selected (you can check the type of
selected object in the Properties List).

To unselect objects

35
 To unselect a selected object from multiple selections, hold Ctrl key and click
on the object.
 To unselect all selected objects, click on a point outside of any object.

Note: you can check the type of selected object in the Properties List. If you are
selecting different types of objects, the value for object type will be read as
“mixed”.

Object Selection Mode

A page may contain several different editable objects. In Advanced Editor, users
can select one project mode to edit, and not need to worry about changing other
types of objects in unconscious operations. If you are aiming at editing text
objects, for example, you can choose text selection mode, thus everything but
text objects will be kept intact no matter what editing way you take.

Here is a list of selection modes in Advanced Editor:

 All modes: The default mode, all types of page objects (text, path, image
and shading) can be selected for editing.
 Text mode: Only text objects can be selected for editing.
 Path mode: Only path objects can be selected for editing.
 Image mode: Only image objects can be selected for editing.
 Shading mode: Only shading objects can be selected for editing.

The selection mode can be accessed by one of the following ways:

Using Tool Bar

 Drop down the selection mode icon from the Toolbar, and select a
selection mode.

Using File Menu

 Select Edit > Options.

 Click Other button on the left of the pop up Option dialog box.
 In the part of Object Selection Mode, you can select a selection mode, such
as All, Text only, Path only, image Only and Shading only.

Editing Objects

You can also freely edit any selected object(s) by the related toolbar.

36
Text Objects

1. Open the PDF document to be edited, and you can use the Text toolbar to
edit the text.

Text Toolbar

2. Use the Split Text to split the whole text into parts.

3. Use the Merge Text to merge objects in a line.

37
4. Use the Graphics Keyboard to insert fonts, especially the imbedded
fonts.

5. Converting Text to Path

Advanced Editor is able to convert the selected text object(s) into path(s), which
will meet the pre-press requirement. For those computers which do not support
or display certain embedded fonts, this new feature helps to overcome that
issue. Advanced Editor also offers a menu option for users to convert the entire
text in a PDF to path.

 Select the text objects which you want to convert to paths.

 Select the Convert selected text to path button , and finish converting.
 Select Object menu > Convert Selected Text to Path, and finish converting.

Graphic Objects

1. Open the PDF file to be edited, double click the graphic you want to modify,
and then you will be switched to the Graphic Editor window.

38
2. In the Graphic Editor window, you can only modify the selected object, but
you can use the Path tools to work with it. After you are done, click the Save

and Exit button to get back to the main window.

3. Adding Shapes in Non-Graphics Editing Mode

Advanced Editor provides several simple auto shapes that users can insert into
a PDF in the non-graphics editing mode. With this new version, users can easily
add a simple shape in the main interface of Advanced Editor without having to
enter into the graphics editor.

39
 Select the pull-down menu on the Toolbar.
 Select the graphics you want to draw, included Line, Rectangle, Filled
Rectangle, Ellipse and Filled Ellipse.

Image Objects

1. Open the PDF file to be edited, double click the image you want to modify,
and then you will be switched to the Image Editor window.

2. In the Image Editor window, you can use the toolbar to work with the image.
After you are done, click the Save to go back to the main window.

40
Shading Objects

1. Open the PDF file to be edited, double click the shading you want to modify,
and then you will be switched to the Shading Editor window.

2. In the Shading Editor window, you can only modify the selected object. You
can use the Path tools to work with it. When you are done, click the Save

and Exit button to get back to the main window.

41
Modifying Objects

Moving Objects

There are several ways to move objects. When an object that contains clip
elements is moved, you can set an option to determine whether the clip should
be moved along with the object.

Using Dragging Action

 Select the object(s) you wish to move, and hold down the left mouse button
to drag it over to the place you desire.

Note: When an object is being dragged, an equivalent blank rectangle is

used to represent the object.

Example: The following is an example of dragging an object. The dotted

object is the object that will be moved, and the blank rectangle represents
where the object is moved. Once you stop holding down the mouse button,
the object is moved to that place.

42
Using Cursor key

 Select the object(s) you wish to move, and press (Ctrl +) the cursor key to
move it in the up, down, right or left direction. In this method, you can also
hold down the cursor key until the object reaches the place you desire.

Using the Properties Pane

 Select the object(s) you wish to move, and in the Properties pane, double
click the item of Position X(point) and/or Position Y(point) (see the
following figure.), and then enter values in the text filed, and finally press
Enter to finish.

Note: If you only want to move one type of object, for example, text object,
you can change Position values in the Text tab of the Properties pane. If you
want to move different types of objects at the same time, you can change
Position values in the General tab of the Properties.

Deleting Objects

There are several ways to delete objects in Advanced Editor:

Using Object Menu

 Select the object(s) you want to delete in the Document window, and then
click Object > Delete Objects from the menu.

43
Using Context Menu

 Select the object(s) you want to delete in the Document window, and then
right click the object(s), in the pop up Context Menu, select Delete
Object.

Using Delete key

 Select the object(s) you want to delete in the Document window, and then
simply press the Delete key.

Using Object Toolbar

1. Select the object(s) you want to delete in the Document window, and then

click the Delete button on the Object toolbar.

Copying/Cutting/Pasting

Advanced Editor allows you to copy and paste in a PDF document. You can copy
and paste some types of objects. For text and image objects, you can copy from
or paste to other Windows applications, like text editor, word processor, or
image editor.

To copy or cut, select the objects you want to copy or cut, then press CTRL + C
to copy, or CTRL + X to cut. You can then go to other place of the PDF document,
or another Windows application, to perform paste operation.

To paste into Advanced Editor, simply press CTRL + V. The pasted objects will
appear at the upper left corner of the page view. You can also use right click on
a place in your PDF page, then select Paste to paste objects at the clicked
position.

Aligning Selected Objects

Automatically places or aligns the selected objects evenly with the Objects Align

button on the toolbar. This feature helps to make your structured PDF
pages more professional. There are six kinds of aligning: Align Left, Right, Top,
Bottom, Center and Middle.

44
Objects Align

 Select the objects which you want to align.

 Click one of the six align types from the pull-down menu of Objects Align,
and finish aligning.

Note: For more information about selecting objects, please refer to Selecting
Objects.

Dragging to Resize Object

Objects can be dragged to resize so that their aspect ratio is retained.

Using Cursor Action

1. Select the object (text, graphics or image) you want to resize;

2. Point to the one of the corner sizing handles;
3. When the pointer becomes a double-headed arrow, drag the handle to
resize the object by the same width and height.

Corner Sizing Handle

Sizing Handle

Rotating Objects

You can rotate objects by a counterclockwise or clockwise angle, and change in

45
any degree. Rotating turns the object around the reference axis and its rotating
direction is determined by the value you enter, negative or positive.

Using Toolbar button

 Select the object you want to rotate, and then click the or on the
Object toolbar to rotate the object counter-clockwise or clockwise.

Using the Properties Pane

1. Select the object you wish to rotate, and in the Properties pane, double
click the Rotate text field (see the following figure.);
2. In the text field, enter a positive value like 5, 13, 30, 90 to rotate the object
counter-clockwise; enter a negative value like -5, -13, -30, -90 to rotate
object clockwise.

Note: In the Properties pane, click General tab if you want to rotate group
types of objects, otherwise click an object tab, like Text tab, Image tab or Path
tab if you only want to rotate the type of object you selected.

Shearing Objects

You can shear objects horizontally.

Using the Properties Pane

 Select the object you wish to shear, and in the Properties pane, double
click the Shear text field (see the following figure.), and then enter values
in the text field. After you are done, press the Enter key to finish.

Note: In the Properties pane, click General tab if you want to shear group
types of objects, otherwise click an object tab, like Text tab, Image tab or Path
tab if you only want to shear the type of object you selected.

Scaling Objects

Scaling enlarges or reduces objects relative to its reference axis. You can scale

46
horizontally, vertically, or both horizontally and vertically.

Using the Properties Pane

 Select the object you wish to scale, and in the Properties pane, double
click the Scale X and/or Scale Y text field (see the following figure.), and
then enter values in the text filed. After you are done, press the Enter key to
finish.

Note: In the Properties pane, click General tab if you want to scale group
types of objects, otherwise click an object tab, like Text tab, Image tab or Path
tab if you only want to scale the type of object you selected.

Setting Objects to Front/Back

An object may be overlapped with one or several objects at the same position.
For example you might have a text object as foreground, and then at the same
location, there is a background graph object with filled color. You can control
whether the current selected object(s) to appear as foreground, or background.

Using Object Menu

 Select the object in the Document Pane, drop down the Object Menu, and
then select Set to Foreground, or Set to Background.

Using Context Menu

 Select the object in the Document Pane, right click it, and then choose Set
to Foreground or Set to Background in the pop- up Context Menu.

Using Shortcut Key

 Select the object in the Document, then use the keyboard shortcut Alt+2 to
Set to Foreground, and Alt + 1 to Set to Background.

Creating Clip Layers for Objects

Advanced Editor allows you to create clip layers for objects. This feature ensures
only parts of the object are visible, and is often useful for images where you may
want to hide the background.

47
To create clipping masks, do the following:

 Click the object you want to add clipping masks in your Document window
(see example1);
 In the Properties pane, click the Clipping value field, and click the edit

button (see example 2);

 You will be switched to the Graphics Editor window;

 In the Graphics Editor window, use the Path tools to create clip layers to the
image (see example 3);

Note: The Clipping value lists all layers that the selected object contains.
Null means no layer for the current selection.

 After you are done, click the Save and Exit button to close the Graphics
Editor window and get back to your Document window and the clip layer has
been added (see example 4).

Example:

1. Here, we select an image object with Null clip layer in the Document
window.

2. Click the Edit button to enter into Graphics Editor window.

3. Here, we use the Ellipse tool to draw a clip layer in Graphics Editor window.

48
4. The clip layer has now been added to the image.

Removing Clip Layers for Objects

Advanced Editor allows you to remove clip layers from objects. This feature is
often useful for revealing the entire object or making parts of object visible.

To remove clipping masks, do the following:

 Click the object you want to remove clip layers in your Document window
(see example1);
 In the Properties pane, click the Clipping value field, and click the

49
 remove button ;

Note: The Clipping value lists all layers that the selected object contains.
Null means no layer for the current selection. You can select to delete one
of the layers or all layers.

 The clip layer is removed (see examples 3 and 5). You can use the Undo
action to retrieve it.

Example:

1. Here, we select an image object with two clip layers in the Document
window

2. Select Clip Layer1 to remove. You can select 2 Layers in Total to remove
layers immediately.

3. The Clip Layer1 is removed

50
4. Select Clip Layer2 to remove.

5. The Clip Layer2 is removed and the entire image becomes visible.

Setting Default Color for Objects

Advanced Editor takes RGB (Red, Green, and Blue) color as default. If you want
to set object color in CMYK (Cyan, Magenta, Yellow, and Key (Black)), you must

51
use the Options dialog box to change the setting first.

To change the color setting, do the following:

1. Select Edit>Options in the menu bar, and click Other tab;

2. Under Color Space Settings, check the CMYK box.
3. Check Save as Default box if you want to keep the setting for next time.

Note: If you check Use Original Color Space in the Other Options tab, you will
not be able to stroke other colors except Gray.

Setting Properties for New objects

Before inserting new objects such as text objects or graphics, you can assign
properties for them so that you an easily insert several objects with same
attributes.

Using the Options dialog box

 Select Edit in the Menu bar;

 Select Options in the drop down menu;
 On the pop-up Options dialog box (see the figure below), you can set
attributes for new inserting objects.

Inserting New Objects

With Advanced Editor, you can insert text objects, image objects, shading object
and graphic shapes like curve, straight line, etc. into your PDF. However, you

52
may like to set its attributes prior to inserting a new object. For details, see
Setting New Object Attributes.

Using Object Menu

 Point to the region you want to insert a new object, drop down the Object
menu, and select “Edit Object” to add the object.

Using Context Menu

 Point to the region you want to insert a new object, right click your mouse,
and select the add object command in the pop-up context menu to add the
object.

Using Toolbar

 Point to the region you want to insert a new object, and then click an
inserting button in the toolbar (see below).

A B C D E F

A: Add Text Objects B: Add Graphics Objects C: Add Graphics in

non-graphics editing mode D: Add Shading Objects E: Add New Image
Objects F: Add Image Objects From File

Text Object

From the Object toolbar, click Add Text Objects button . In the Add new
text objects dialog box, input any text you want, and click OK to insert.

53
Note: To insert more than one line, you can simply press Ctrl + Enter to start a
new line.

Blank Page

Open an existing PDF file to be edited, and insert a blank page using button .
On the left is the example of a new blank page.

Graphics Object

From the Object toolbar, click Add a Graphic Object button , and you will
be switched to the Graphic Editor window. Select a tool from the Path Toolbar to
draw a path you want.

54
 Path Toolbar

Image Object

To insert an existing image from file, click Add Image Objects From File

button to insert the image. To insert a self-created image, click Add New

Image Objects button , or go to Object > Add Image Objects > Add New
Image Objects or Add Image Objects From File (Ctrl + I).

Note: Advanced Editor supports transparent .PNG but not .GIF images at
present.

55
Shading Object

From the Object toolbar, click Add a Shading Object button , and you will
be switched to the Shading Editor window. Select a tool from the Path Toolbar to
draw a path you want.

Path Toolbar

Object Properties

Viewing Object Properties

Before changing an object, you may like to know what attributes are included in
the object, for example, object position, font information, fill or stroke color, etc.
You may also want to know what sort of object you are selecting. In Advanced
Editor, you can use the Properties pane to view the selected object properties
and their values.

When you select an object in the Document pane, the object tab that appears in
the Properties pane will be changed to reflect the selected object. For example,
if you select a text object, the Text tab will appear in the Properties pane and
displays most of the information about the text.

Changing Object Attributes

The Properties pane provides an easy way to change any selected objects. If the
Properties pane is hidden, select the View menu and check Properties list to
show the Properties pane.

56
Select an object or objects in the document, and then do the following:

 Use the Text tab to change the text object properties.

 Use the Image tab to change image properties.
 Use the Path tab to change the graphics properties.
 Use the General tab to change the properties common to the above
attributes.
 Use the Shading tab to change shading properties.

1. Open an existing PDF file that you want to be edited. Select an object, or
hold down CTRL to select multiple objects. Here we select the text, graphic,
image and shading objects as example.

2. The Properties pane changes to reflect the object you select. You can use
the General tab to change the common attributes to the objects you
selected. Or, you can use the Text tab to change text attributes, Path tab to
change the graphic attribute, Image tab to change the image attributes, or
shading tab to change the shading attribute. After you are done, press the
Enter key.

57
3. General Properties.

You can specify a number of properties that are common to all objects in the
General properties.

 Position X and Y: Allow you to set the precise horizontal and vertical
position of the objects.
 Rotate: Move the object clockwise or counter-clockwise around the
reference axis.
 Shear: Allows you to slant an item horizontally.
 Scale X and Y: Make an object bigger or smaller. You can scale
horizontally or vertically.
 Fill Color: The fill color is used to paint the interior of paths and text
characters that are filled.
 Stroke Color: The stroke color is used to paint the border of paths and
text that are stroked.
 Clipping: When the selected object contains any clip inside, the clip
value displaying as “mixed”. Otherwise it displays as “Null”. You can click
the rubber button next to the clipping text field to remove the clipping.
 Objects Selected: Shows the number of objects you currently have
selected.
 Objects Type: Shows what type of object you currently have selected.
When different types of objects are selected, its type is “mixed”.

4. Text Properties

 Text: Shows the contents of the text.

 Text Mode: The Text Mode determines whether text is stroked or filled.

There are four types of text modes as shown in the following figure, in which
a stroke color of black and a fill color of light gray are used.

1.Fill text (default) 2.Stroke text 3.Fill then stroke text 4. Text with no fill and
no stroke (invisible)

 Character (Char) Space: The Char Space value is a number specified in

text space units. It is added to the displacement between the origin of one
character and the origin of the next.

In the default coordinate system, the positive direction of the x-axis points
to the right, and the positive direction of the y-axis points upward. So, for

58
 horizontal writing, a positive value of Char Space has the effect of
expanding the space between characters; see the following figure. For
vertical writing, however, a negative value of Char Space has the effect of
expanding the space between characters.

Character 0 (default)

Character 0.25
Char Space for Horizontal Writing

 Word Space: The Word Space value is a number specified in text space
units. It works in the same way as character spacing.

For horizontal writing, a positive value for Word Space has the effect of
increasing the spacing between words. For vertical writing, a positive value
Word Space decreases the space between words, since the positive
direction of the y-axis points upward; therefore a negative value will
increase the space between words. The following figure illustrates the effect
of word space in horizontal writing.

Word Space 0(default)

Word Space 2.5

Effect of word space in horizontal writing

 Font: Font is a font in the current resources dictionary. The following lists
the standard 14 fonts which are guaranteed to be available to Advanced
Editor.
 Font Size: Font Size is a number expressed in the text space units.
 Horizontal Scale: The Horizontal Scaling adjusts the width of characters
by stretching or shrinking them in the horizontal direction. The scaling is
specified as a percent of the normal width of the characters, with 100 being
the normal width. The following figure shows the effect of horizontal scaling.
The scaling always applies to the x coordinate, independent of the writing
mode.

100 (default)

50

Horizontal Scaling

59
 Line Gap: The Line Gap specifies the vertical distance between the lines of
text, as shown in the following figure. The initial value for Line Gap is 0.

Line Gap

5. Path Properties

 Fill Type: The Fill Type specifies how the interior of a path is determined.
There are three types of fill: No Fill, Alternate, and Winding.
 No Fill means the enclosed regions of the path are transparent.
 Winding means that if a ray is drawn in any direction from a given point
to infinity and the places where the path intersects the ray are tested,
the point is inside of the path if and only if the result that the path
crosses the ray from left to right does not equal the result that the path
crosses the ray from right to left. If the result is equal (zero), the point
is outside of the path. See the following illustrations for the winding
effect.

 Alternate or called EVEN_ODD, uses a slightly different rule. Instead of

testing for a result of zero, alternate uses a test to determine whether
the result is even or odd. If the result is odd, the point is inside the path;
if the result is even, the point is outside. See the following illustration
for the winding effect.

60
 Line Width: The line width specifies the thickness of the line used to stroke
a path and is measured in user space units. A line width of 0 specifies the
thinnest line that can be rendered on the output device. The default value is
1.

Note: A line width of 0 is an inherently device-dependent value. Its use is

discouraged because the line may be nearly invisible when printing on
high-resolution devices.

 Miter limit: When two line segments meet at a sharp angle it is called a
Miter join and have been specified as the line join style. It is possible for the
miter to extend far beyond the thickness of the line stroking the path. The
miter limit imposes a maximum on the ratio of the miter length to the line
width, as shown in the following figure. When the limit is exceeded, the join
is converted from a miter to a bevel.

The value for miter limit is a number that must be greater than or equal to
1, and has a default value of 10.

Miter length
 Line Cap Style: The line cap style specifies the shape to be used at the
ends of open sub paths when they are stroked. Allowed values are Butt end
caps, Round end caps, and Projecting Square End.
 Butt end caps (default) --- the stroke is squared off at the endpoint
of the path.

 Round end caps: --- a semicircular arc with a diameter equal to the
line width is drawn around the endpoint and filled in.

 Projecting square end: --- the stroke extends beyond the end of the
line by a distance which is half the line width and is squared off.

Butt end caps Round end caps Projecting square end

 Line Join Style: The line join style specifies the shape to be used at the
corners of paths that are stroked. The allowed values are Miter joins, Round
joins and Bevel joins.

61
  Miter joins — the outer edges of the strokes for the two segments are
continued until they meet. If the extension projects too far, as
determined by the miter limit, a bevel join is used instead.

 Round joins — a circular arc with a diameter equal to the line width is
drawn around the point where the segments meet and filled in,
producing a rounded corner.

 Bevel joins — the two path segments are drawn with butt end caps
(see the discussion of line cap style), and the resulting notch beyond
the ends of the segments is filled in with a triangle.

Miter joins Round joins Bevel join

Butt end caps Round end caps Projecting square end

6. Image Properties

 Width and Height: Displays the selected image’s width and Height values;
displays the largest values if you select a number of different images.
 Resolution X and Y: Displays the precise horizontal and vertical resolution
of the image objects.
 Alpha: Allows users to set image transparency by inputting values between
0% and 100% in the Alpha text field; the image goes from fully transparent
to fully opaque.

7. Shading Properties

 Shading Type: Displays as Linear if you selected one Linear shading or two
types’ shading. Otherwise, displays as Radial.
 Extend: Extend is an optional array of two Boolean values that specify
whether or not to extend the start and end colors past the start and
endpoints, respectively. The default value for each element of the array is
true.

There are four kinds of Extend values to choose, including “true true”, “true
false”, “false true” and “false false”.

 Start X and Y: Allows you to set the precise horizontal and vertical position
of the shading’s start point.
 End X and Y: Allows you to set the precise horizontal and vertical position
of the shading’s end point.
62
 Alpha: Allows users to set shading transparency, by inputting values of
between 0% and 100% in the Alpha text field, the shading goes from fully
transparent to fully opaque.

Editing Page Layout

1. Go to the page you want to edit its layout, click the Page Layout button
from the Page toolbar, and then you will be switched to the Layout Editor
window.

Page Toolbar

2. Use the Layout toolbar to resize the page size or content size, the Page
Properties to change the page attributes, and Reset to cancel all actions.

After you are done, click the Save and Exit button to get back to main
window.

Layout Toolbar

63
Modifying Pages

There are several ways you can do modifications on pages.

 Insert new page

When you insert a new page, you can customize the page attributes like the
page dimension and/or content measurement. To insert page, you can
select Page > Insert Page on the menu bar.

 Copy Pages
You can copy a whole page into another page, just like cloning. To copy page,
simply perform copy and paste command.

 Import and Export pages

You can insert pages from other PDF document into your document; and
extract pages from your document into an existing PDF document.

 Delete Page:
You can delete an unwanted page. To delete the page, you can select Page >
Delete Page on the menu bar.

See Also: Work with Pages

Using Rulers and Grids

C
A

A. Rulers B. Guides C. Grids

Advanced Editor provides horizontal and vertical rulers and grids to help users
align and position objects precisely on the page, and measure the dimensions of
64
the shapes.

Display rulers

Choose View > Rulers, or right-click the mouse on the page and check Rulers
option.

Hide rulers

Choose View > Rulers, or right-click the mouse on the page and uncheck Rulers
option, or right-click the horizontal ruler or the vertical ruler and then choose
Hide Rulers.

Create ruler guides

Do one of the following:

 Drag down from the horizontal rulers to create a horizontal guide, or drag to
the right of the vertical ruler to create a vertical guide.
 Double-click a location on the horizontal ruler to create a vertical guide, or
double-click a location on the vertical ruler to create a horizontal guide.

Move ruler guides

Click and hold the guide, and then drag it to a new location.

Change unit of measurement

Right-click the horizontal ruler or the vertical ruler, and select a measurement
system for the rulers. There are five kinds of unit: Points, Picas, Millimeters,
Centimeters, and Inches.

Delete ruler guides

 Delete a guide by selecting the target guide and press the Delete key.
 Delete all guides on a certain page by scrolling to the page and right-click in
the ruler area and choose Clear Guides on Page.
 Delete all guides by right-click in the ruler area and choose Clear All Guides.

Snapping objects to grids

The Snap To Grid Function automatically positions text and other objects to the
closest intersection of the grids as you place or move them on the page. The
grids do not print.

 To use or hide the grid, choose View > Grid, or right-click the mouse on the
65
 page and choose Grid.
 To snap an object to gridlines, choose View > Snap To Grid, select the object
you want to move, and drag it toward a grid until its edges are within the
grid’s snap-to zone.

66
Chapter 4 – Working with Pages

Advanced Editor allows you to insert and delete the pages in a PDF document,
import pages from other PDF documents into your document, and export the
pages from your document. You can also reorganize the pages by Page Layout
Editor.

About Page Toolbar

Page tools can be found on the toolbar (see the following figure), which by
default is located on the Toolbar.

Page Toolbar

 Click the Previous Page icon or the Next Page icon to go to the
previous or next page.

 Click the First Page icon or the Last Page icon to go to the first or
last page.

 Click layout button to switch to the Page Layout Editor window, so you
can reorganize the page layout.

 Click the Insert a Blank Page button , and you can set the blank page
attributes in the pop-up dialog box.

 Click the Delete Current Page button to delete a current page in your
PDF document.

Note: If you find the Page Toolbar is invisible, Select View > Page Toolbar in
the menu to show it.

Setting Page Options

Before inserting a page, you might like to preset some options so that you can
easily insert pages with your personalized preferences.

67
To set page options, do the following:

1. Select Edit > Options from the menu bar, or press Alt + O keyboard.
2. In the pop-up Options dialog box, click Page.
3. In the Page tab, change the values to suit your preferences.
4. After you are done, click the Ok button. Click the Restore Default button
to leave the settings unchanged.

Note: After you exit the program, all the changes are restored to default.

Inserting Blank Pages

Advanced Editor allows you to insert a blank page into your PDF document. To
insert blank pages, please do the following:

1. Locate the page where you want to insert a blank page before or after.

2. Do one of the following:

 Point to the Page toolbar, and click Insert a Blank Page button
 Select document > Insert Page on the Menu bar

3. On the pop-up New Page Attributes dialog box, assign the new attributes
you want.

Note:

 You can use the Options dialog box to preset the page attributes for the
inserting page.
 If you do not want the New Page Attributes dialog box to show up when
you insert a page, you can uncheck the option “show page setting
dialog when inserting a page” in the Other Options tab.

See also:
Page Options in Setting Options
Other Options in Setting Options

Importing and Exporting Pages

Advanced Editor allows you to import pages from other PDF documents, and
insert into your PDF document; and also allows you to export pages from your
PDF document into an existing PDF document.

68
To import pages, do the following:

1. Select Document > Import Page(s) item from the Menu bar in your
Document window.
2. In the following pop-up dialog box, do the following:

 Under Position, check one of items to decide where to insert the pages.

 Under File, click the Open button to look for the document you
would like to export pages from. Then the Total Page(s) field will
display the total page numbers of the document.
 Under Page Range, check one of the items to select how many pages
or which page you want to import.
 In Document Preview, you can navigate in the document to look over
the pages before importing.

3. After you are done, click the Ok button to insert the page and close the
dialog box.

To export pages, do the following:

1. Select Document > Export Page(s) item from the Menu bar in your
document window.
2. In the following pop-up dialog box, do the following:

 Under Destination, click the Open button to look for the existing
document that you will export the pages into.
 Under Page Range, check one of the items to select the page(s) you
want to export and the Total Page(s) displays your current document
total page number.
 In Document Preview, you can navigate in the document to look over
the pages before exporting.
69
Note: Exporting pages to an existing document will cover all the document
pages.

3. After you are done, click the Ok button to insert the page and close the
dialog box.

Deleting Pages

Advanced Editor allows you to delete a current page in your PDF document.

To delete a current page, do the following:

1. Locate the page which you want to delete.

2. Do one of the following:

 Point to the Page toolbar, and click Delete Current Page button
 Select Document > Delete Page on the Menu bar
 Press keyboard shortcut Alt + Del

3. A warning message pops up to confirm your deleting action.

4. Click the Ok button to delete the page.

Deleting Warning Message

About the Page Layout Editor

70
Advanced Editor allows you to reorganize the page layout, such as, to change
the page size, adjust the content size, and rotate pages.

To adjust page layout settings, do the following:

1. Point to the Object toolbar.

2. Click the Page Layout button .

3. You will be switched to the Page Layout Editor window.
4. In the Layout Editor window, use the available tools to change the page
layout.

5. After you are done, click the Save and Exit button to close the Page
Layout window and go back to your Document window.

As you click layout button in the Main window of Advanced Editor, you will
be guided to the Page Layout Editor window as shown in the following figure.

Size Handle

Red Media Box for Resizing Page

The Layout pane is especially useful when you want to specify the page layout
for user preview or print. When you resize the page or clip the content size, the
page will be surrounded by a red media box or a green crop box with Sizing
Handle. You can drag the Sizing Handle to adjust the size.

The Page Layout Editor window consists of a Layout Toolbar to reorganize the
page, a Zoom Toolbar to magnify or reduce the page, and a Page Properties
Pane to set up the page by specifying the actual value.

1. The Layout Toolbar contains the main tools for you to work with the page

71
 layout.

Clip Content Reset Save and Exit

Resize Page Rotate Page Exit without Save

2. All the tools on the layout toolbar can be accessed from the Context Menu as
shown in the following figure.

Context Menu

3. When you adjust the page size, you may use the Zoom Toolbar to zoom
in/out your page for easy operation.

Zoom Toolbar

4. If you would like to reorganize the page layout by specifying the actual value,
you can use the Page Properties Pane (see the following figure). Just
double-click the value field, and input your desired value.

Page Properties Pane

72
To resize a page

Resizing a page is actually to enlarge or reduce the red Media Box of a page
currently displayed in the layout window. It is very useful if there are documents
with different page size (for example the dimensions of A4 and A3 ) which you
want to make unified in as the same size (for example A4). When you resize a
page, you may like to zoom out to the best fit size for easy operation.

To resize a page, you can use the Resize button, the Context menu, or the Page
Properties Pane.

Using the Resize Page button

1. Click on Resize Page button on Layout Toolbar, and you will see the
following change:
2. The page rectangle in layout window is highlighted in red with sizing handles.
This rectangle is called the media box, and it is the natural size of a page.
3. Drag one of the sizing handles to any size you want.

4. After you are done, click the Save and Exit button to go back to the

Main Window, or click the Reset button to take back the change and
redo.

Note: Please be aware that the intersection between the page's size and the
content size is the region that is viewed or printed. The content size’s default is
the value of media box. So, on one hand, when you shrink the page's size
without reducing the content size accordingly, the portion outside of the page
size will not be displayed in the Viewer (see the following example). On the
other hand, if you enlarge the page size without resizing the content size, the
displaying content is kept intact, while the page size is expanded (for example
expanded from A4 to A3). This will affect your printing result.

Example:

The following example shows a page size with a red media box that is reduced
in Layout Editor and its result got displayed in a reader.

73
 ① ② ③

Example ①: Shows the original PDF page.

Example ②: Shows the page is resized in Layout Editor. The *red box* indicates
the page size you pick.
Example ③: Shows the result page layout in PDF Reader

Using the Page Properties Pane

1. Double-click the value field next to the Width (Page Size) or Height
(Page Size) in Page Properties pane;

2. Type the size value you want;

3. Click any other place, or press Enter to take the change effect.

To clip a page content

Clipping content is actually to adjust the page's green crop box (see the
following figure), so to adjust the file display, the output file page size and the
file print. When you clip content, you may like to zoom out your page to the best
fit size for easy operation.

Green Crop Box for

Content Clipping

Sizing Handle

74
To clip the content, you can use the Clip Content button on the Layout toolbar,
the Context menu, or the Page Properties Pane.

Using the Clip Content button

1. Click on Clip Content button on the Layout Toolbar, and you will see
the following change:
2. The page rectangle in layout window is highlighted in green with sizing
handles. This rectangle is called a crop box, its default is the value of page
size.
3. Drag the sizing handles to any size you want.

4. After you are done, click the Save and Exit button to go back to the

Main Window, or click Reset button to take back the change and redo.

Using the Page Properties Pane

1. Double-click the value field next to the following properties name in Page
Properties pane:

2. Type the size value you want.

3. Click any other place or press Enter for the change to take effect.

To rotate a page

Rotating content will change the orientation of the currently displayed page's
content. This will change its actual orientation of the page, and can be saved
and generated into a PDF file.

To rotate the content, you can use the Clip Content button on the Layout toolbar,
the Context menu, or the Page Properties Pane.

Using the Rotate Page button

1. Click on Rotate Page button on Layout Toolbar.

2. Click the page to rotate the page 90 degrees.

75
3. After you are done, click the Save and Exit button to go back to the

Main Window, or click the Reset button to take back the changes and
redo.

Using the Page Properties Pane

1. Double-click the value field next to Page Rotate in Page Properties pane:

2. Drop down the combo box and select an orientation degree to rotate.
3. Click any other place or press Enter for the change to take effect.

76
Chapter 5 – Working on Text
Objects

A text object consists of one or more characters that can be placed anywhere on
the page and in any orientation. Text Objects can be stroked or filled, and uses
fonts to specify what the characters look like, and font sizes to specify how
large those characters are.

About Text Toolbar

Text tools can be found on the toolbar (see the following figure), which by
default is located on the Toolbar.

Text Toolbar

Note: If you find the text toolbar is invisible, Select View > Text Object
Toolbar in the menu to show it.

To Use Graphics Keyboard

The Graphics Keyboard is helpful for you to intuitively view all characters
contained in a text font and to selectively input the characters.

When a type of font text, including embedded font text, is selected or dotted,
the graphics keyboard button is activated, otherwise it is disabled. By clicking

the Graphics Keyboard button , you can bring about a dialog box for
modifying the font (see the following figure).

77
 Text Object field

Characters Pane

Graphics Keyboard

The Text Object field displays the current selected text, and the Characters
Pane displays all characters contained in the selected text font.

To use graphics keyboard, do the following:

1. Select a block of text in the page.

2. Click the Graphics Keyboard button on the Text toolbar.

3. Click the Text Object field, and use the Backspace Key to delete the
characters you do not want.
4. Click the character you desire in the Characters Pane, which will be
displayed into the space where the cursor rests in the Text Object field.
5. After you are done, click Ok to finish.

To Merge Text

Blocks of text may be merged together when you need to join text as one
object.

To merge text, do the following:

1. Select blocks of text you want to merge in a same line.

2. Click the Merge Text button on the Text toolbar to merge the text.
3. After merging, the dash rectangle is switched to selection status ready for
dragging.

Text before merging

78
Text after Merging

Note: You can only merge blocks of text in a same line

To Split Text

A block of text can be divided up into several parts.

To split text, do the following:

1. Select a block of text you want to split.

2. Click Split Text button on the Text toolbar.

3. In the Split Text dialog box, click the desired place where a split mark will
appear.
4. Click Ok button to finish.

Before Splitting

Split Mark

In the process of splitting

After splitting

79
To Import Windows Fonts

You may find that you would like to use a font that is not in the current font
resources. In this case, you can import fonts installed on your Windows system.

1. To import a Windows font, do the following:

 Click Import Font button on the Text toolbar.

 In the Import Windows Font dialog box (see the following figure), select
your desired font.
 Click the Ok button to finish.

Import Windows Font

2. To set the imported font as default

After importing a font in a current document, you may want it to be your default
font so that you can easily insert text with that same font many times. To set the
imported font as default, do the following:

 Select Edit > Options in the menu bar.

 Click Other options dialog box in the Options dialog box.
 Check Set as default font after being imported. By default, this option is
checked.

To Convert Selected Text to Path

Advanced Editor is able to convert the selected text object(s) into path(s), which
will meet the pre-press requirement. For those computers which do not support
or display certain embedded fonts, this new feature helps to overcome that
issue. Advanced Editor also offers a menu option for users to convert the entire
text in a PDF to path.

 Select the text objects which you want to convert to paths.

80
 Select the Convert selected text to path button , and finish converting.
 Or select Object menu > Convert Selected Text to Path, and finish
converting.

Finding Text

You can search text in PDF files with the Find box. Searching text with the tool
will highlight the matching text snippets.

Find text by:

 Input text in the Find box.

 Click the drop-down button next to “Search:” , and choose from the
search options:

A. Whole words only – limits the search to match only whole words, i.e.
searching Edit won’t return Editor.
B. Case-Sensitive – makes the search case-sensitive., i.e. searching text
won’t return TEXT.

 Press the Find Next button , Find Previous button , or Enter.

Advanced Editor jumps to the first instance of the search term, which
appears highlighted.

 Press Enter repeatedly to continue searching the next instances of the

search term.

Setting Text Options

Before inserting text, you might like to preset some options so that you can
easily insert text with your personalized preferences.

To set text options, do the following:

1. Select Edit > Options from the menu bar, or press Alt + O.
2. In the pop-up Options dialog box, click Text.
3. In the Text tab, change the values to suit your preferences.
4. After you are done, click the Ok button. Click the Restore Default button
to leave settings unchanging.

81
Note: After you exit the program, all the changes are restored to default except
the Font option. You can set it as default for the next time in the Other Options
tab.

Selecting Text Mode

To modify text objects, you can select to work in a text state, so that you can
easily and solely interact with those text objects without affecting any other
type of objects.

To select text state, do one of the following:

1. Select Text from the drop down list of Choose Selected Objects’ Type
in the Menu Bar.
2. Select Edit > Options. In the pop-up dialog box, select the Other tab, and
check “Text only” under Objects Selection Mode.

Inserting New Text

With Advanced Editor, you can insert new text objects, using the standard 14
fonts, embedded, non-embedded fonts, or Windows fonts.

To insert a new text object, do the following:

1. Point to a region where you want to insert new text, and then do one of the
following:

1) Click the button on the Object toolbar

2) Select Object > Add Text on the Menu bar
3) Use the keyboard shortcut CTRL+T
4) Right-click the mouse in the Document window, and select Add Text in
the context menu.

2. In the pop-up Add New Text Objects dialog box (see the following figure),
enter text in the text editing field, press CTRL+ENTER to start a new line.

With Advanced Editor, text attributes such as as font, color, size, horizontal
scale, line gap, etc., can now be set directly in the “Add new text objects”
dialog box.

82
 Add New Text Objects Dialog Box

Note: After setting the text attributes, you cannot preview the text settings
in the blank text field while typing words.

3. You can also click the Other object attributes option, and set other
preferences for text objects in the pop-up Options dialog box, such as Char
space, Word space and so on. And click Restore Default to restore the
default settings.

4. After you are done, click the Ok button to insert.

Note:

 If you want to insert blocks of texts with the same properties, you can
also use the Text Options dialog box to preset preferences for
83
 inserting text.
 After inserting text, you can use the Text Properties Tab to change
the text attributes. Or use the text toolbar to edit it.

Editing Text Objects

To change text contents

1. Select the text and click the Edit Object button , or double-click a string
of text you want to change in your page to enter in-place editing mode.
2. In the in-place editing mode, the text you selected appears highlighted.
Please move your mouse cursor directly to the proper place you wish to edit.

3. You can click the Undo button to undo previous actions. After

modifying the text, click Save and Exit button or Exit without Save

button to exit the in-place editing mode.

Notes:
 Double-click to enter the in-place editing mode may be unavailable
when multiple objects overlap.
 You can only change a block of text at a time.
 Note that a text object consists of a group of characters, if the
characters you typed are not in the group, they will not be displayed in
the page. You can use the Graphics Keyboard to intuitively view all the
characters in the font.

See Also: To Use Graphics Keyboard

To adjust character space

1. Select the characters you want to change in your page.

2. In the Text Properties tab, click the text field next to Char Space.
3. In the text field, input the spacing value, and click any other place to
change.

To adjust word space

1. Select the words you want to change in your page.

84
2. In the Text Properties tab, click the text field next to Word Space.
3. In the text field, input the spacing value, and click any other place to
change.

To change text font

1. Select a string of text you want to change.

2. In the Text Properties tab, drop down the font list box next to Font.
3. If you want a font that is not listed, you can use the Import Font button on
the Object toolbar to import fonts installed on your Windows system.

To change font size

1. Select a string of text you want to change in your page.

2. In the Text Properties tab, click the text field next to Font Size.
3. In the text field, input the spacing value, and click any other place to
change.

To fill/stroke text color in RGB/CMYK

1. Select a string of text you want to fill/stroke in your page.

2. In the Text Properties tab, click the text field next to Fill Color/Stroke
Color.
3. Click the arrow button on the right to view the current value.
4. Click the Edit button on the right and drag the color bar match the color.

5. After you are done, click the button to make the change effect.

RGB Fill/Stroke Color Box CMYK Fill/Stroke Color Box

Note: Advanced Editor takes RGB color as default; if you want to set text color
in CMYK, you must use the Options dialog box to change the setting first.

See Also: Setting Default Color for Objects

To change text mode for fill/stroke color

85
There are four types of text modes, and Advanced Editor takes Fill Text as a
default setting. If you find the text you selected cannot be stroked, you must
change the text mode to Stroke Text mode or Fill then stroke text mode.

To change text mode, do the following:

1. Click the Text Properties tab in the Properties pane.

2. Drop down the Text Mode box and select a type of text mode.
3. After you are done, click any other place the take change effect.

To modify text objects

Advanced Editor allows users to move, delete, rotate, shear, scale and align
objects, and create clip layers for Text Objects, etc.

More information about modifying, please refer to Modifying Objects.

86
Chapter 6 – Working on Image
Objects

An image object consists of a set of samples using a specified color model.

Images can be placed anywhere on a page and in any orientation.

Selecting Image Mode

Before modifying image objects, you can select to work in an image state, so
that you can easily and solely interact with those image objects without
affecting any other type of objects.

To select image state, do one of the following:

1. Select Image from the drop down list of Choose Selected Objects’ Type

in the Menu Bar.

2. Select Edit > Options. In the pop-up dialog box, select the Other tab, and
check “Image only” under Objects Selection Mode.

Insert New Image

With Advanced Editor, you can insert an existing image from file, insert a new
image created by yourself, or embed an image from the clipboard.

Note: Advanced Editor supports transparent .PNG but not .GIF images at
present.

To insert an image from file

Locate the page where you want to insert the image in your document, and then
do one of the following:

1. Locate the page where you want to insert the image in your document, and
then do one of the following:
 Point to the Object toolbar, and click the Add Image Objects From

File button .
 Right click the page, and select Add Image Objects > Add New

87
 Image Objects From File on the Context menu.
 Point to Object menu, and select Add Image Objects > Add New
Image Objects From File.
2. In the pop-up Open dialog box, find your desired image, and click on Open
button.
3. You current Main window is switched to the Image Editor window (see the
following figure). Click the Close button to exit if you don’t want to do any
changes to the image.
4. Once you are back to the Main window, the image is inserted. You can resize
the image and drag it to any place you want.

To insert a self-created image

1. Locate the page where you want to insert the image in the document, and
then do one of the following:

 Point to the Object toolbar, and click the Add New Image Objects

button
 Right click the page, and select Add Image Objects > Add New
Image Objects on the Context menu
 Point to the Object menu, and select Add Image Objects > Add New
Image Objects

2. A New Image dialog box pops up (see the following figure). You may
change the parameters, and then click the Ok button
3. You are now in the Image Editor window, and you can use the toolbar and
filter tools to draw your image from scratch.
4. After you are done, click Save to exit and get back to the Document
window.
5. Once you are back to the Document window, the image is inserted. You can
resize the image and drag it to any place you want.

88
To embed an image from clipboard

1. Locate the page where you want to embed the image in the document from
the clipboard.
2. On the Edit menu, click Paste, or press Ctrl + V.
3. You current Main window is switched to the Image Editor window, just click
the Close button to exit if you don’t want to do any changes to image.
4. You are back to the Main window, and the image is inserted. You can resize
the image and drag it to any place you want.

About the Image Editor

Image Editor is an image editing program that is part of Advanced Editor. You
will be directed to the Image Editor Window (see the following figure) when
taking one of the following procedures in the Main window of Advanced Editor:
 Select Create a New Image in the Main window
 Double click a current object in the page
 Select to Open an Existing Image in the Main Window
 Paste an image from the clipboard

Layer Palette Function Palette

Color Palette
Histogram Palette

Image Editor Window

To edit image with Image Editor, do the following:

1. Double-click the image you want to edit in the Document window.

2. You will be switched to the Image Editor window.
3. In the Image Editor window, you can use the toolbar together with the filter
tools to edit the image.
4. After you done, click Save to exit and get back to your Document window.
89
Currently, the Image Editor Window consists of the following components:

Filter Menu
The filter menu holds tools for applying filters for special effects. (See also:
Using Filters)

Toolbox
The toolbox holds tools for creating and editing images. (See also: Using the
Toolbox)

Options Palette
The options palette provides options for using a tool. (See also: Using the
Options Palette)

Layer Palette
Layer Palette helps you monitor and modify images. (See also: Using the Layer
Palette)

Color Palette
Color Palette displays the color values for the current foreground and
background colors. (See also: Using the Color Palette)

Histogram Palette
The histogram of an image normally refers to a histogram of the pixel intensity
values. This histogram is a graph showing the number of pixels in an image at
each different intensity value found in that image. (See also: Using the
Histogram Palette)

Replacing an Image

1. On the Toolbox, click Replace button .

2. In the pop-up Open dialog box, search the image file you want and click
Open button.

Note: Only BMP, PCX, TIF, and JPEG format file can be opened.

3. You get a confirmation message asking you if you want to continue to

replace the current active image. If yes, click the Ok button to finish.

Note: The replaced image will never be recovered.

90
Saving Images

1. On the Toolbox, click Save to File button .

2. In the File name box of the Save dialog box, type a new name for the image.

Note: Currently the file format type is limited to save as BMP.

Zooming Images

You can use the zoom tool to magnify or reduce your view.

To zoom in

Select the zoom tool on the Toolbox. The pointer becomes a magnifying
glass with a plus sign in its center . Click the area you want to magnify.

To zoom out

Select the zoom tool. The pointer becomes a magnifying glass with a minus sign
in its center . Click the center of the area of the image you want to reduce.

Using the Toolbox

The first time you start the application, the toolbox appears on the left side of
the screen. Some tools in the toolbox have options that appear in the tool
options palette (See using the tool options palette).

You can select a tool by clicking its icon in the toolbox. Positioning the pointer
over a tool displays a tool tip with the tool's name.

To show or hide the toolbox:

Choose View > Image Toolbar > Tools. A check mark indicates the item is
showing.

To move the toolbox:

Drag the toolbox by its title bar to move.

91
Selecting tools include Rectangle tool, Magic Wand tool and Lasso tools.

Painting tools include Eyedropper tool, Bush tool, Paint Bucket tool, Dodge
tool, Burn Tool and Eraser tool.

Flipping tool is to flip the entire image horizontally or vertically.

Selecting Tools

Using the rectangle tool

 Select the rectangle tool from the Toolbox.

 Drag over the area you want to select.

Using the magic wand tool

The magic wand tool lets you select a consistently colored area without having
to trace its outline. You can specify the tolerance for the magic wand tool's
selection.

 Select the magic wand tool .

 In the Options palette, drag the slider to specify the Tolerance, or enter a
value ranging from 0 to 255.
 To select only adjacent areas using the same colors, select Contiguous.
Otherwise, all pixels using the same colors will be selected.
 In the image, click the color you want to select. If Contiguous is selected,
all adjacent pixels within the tolerance range are selected. Otherwise, all
pixels in the tolerance range are selected.

Using the lasso tools

The lasso and polygonal lasso tools let you draw both straight-edged and
freehand segments of a selection border.

To use the lasso tool

 Select the lasso tool from the Toolbox.

 Drag to draw a freehand selection border.

92
To use the polygonal lasso tool

 Select the lasso tool from the Toolbox.

 Click in the image to set the starting point.
 Double click the image to close the selection.

Cutting, copying, and pasting selections

 Select the area you want to cut /copy.

 Choose Cut out tool or Copy tool from the Toolbox.
 Paste the selection into the same image or another application.

Deleting selections

 To delete a selection, select the part you want to delete, and press the Del
key.
 To cut a selection to the Clipboard, click Cut out tool from the Toolbox.

Painting Tools

1. Setting options for painting

You can set options for a painting tool in the Options palette.

Selecting a blending mode

The blending mode specified in the Options palette controls how pixels in the
image are affected by a painting or editing tool.

 To select a blending mode for a tool

Choose from the Mode drop-down menu in the options palette.

 Normal

Edits or paints each pixel to make it the result color. This is the default mode.

 Color Burn

Looks at the color information in each channel and darkens the base color to
reflect the blend color by increasing the contrast. Blending with white produces
no change.

 Color Dodge

93
Looks at the color information in each channel and brightens the base color to
reflect the blend color by decreasing the contrast. Blending with black produces
no change.

 Darken

Looks at the color information in each channel and selects the base or blend
color--whichever is darker--as the result color. Pixels lighter than the blend
color are replaced, and pixels darker than the blend color do not change.

 Difference

Looks at the color information in each channel and subtracts either the blend
color from the base color or the base color from the blend color, depending on
which has the greater brightness value. Blending with white inverts the base
color values; blending with black produces no change.

 Exclusion

Creates an effect similar to but lower in contrast than the Difference mode.
Blending with white inverts the base color values. Blending with black produces
no change.

 Hard Light

Multiplies or screens the colors, depending on the blend color. The effect is
similar to shining a harsh spotlight on the image.

 Lighten

Looks at the color information in each channel and selects the base or blend
color--whichever is lighter--as the result color. Pixels darker than the blend
color are replaced, and pixels lighter than the blend color do not change.

 Linear Light

Burns or dodges the colors by decreasing or increasing the brightness,

depending on the blend color. If the blend color (light source) is lighter than
50% gray, the image is lightened by increasing the brightness. If the blend
color is darker than 50% gray, the image is darkened by decreasing the
brightness.

 Multiply

Looks at the color information in each channel and multiplies the base color by
the blend color. The result color is always a darker color. Multiplying any color
94
with black produces black. Multiplying any color with white leaves the color
unchanged. When you're painting with a color other than black or white,
successive strokes with a painting tool produce progressively darker colors. The
effect is similar to drawing on the image with multiple magic markers.

 Overlay

Multiplies or screens the colors, depending on the base color. Patterns or colors
overlay the existing pixels while preserving the highlights and shadows of the
base color. The base color is not replaced but is mixed with the blend color to
reflect the lightness or darkness of the original color.

 Pin Light

Replaces the colors, depending on the blend color. If the blend color (light
source) is lighter than 50% gray, pixels darker than the blend color are replaced,
and pixels lighter than the blend color do not change. If the blend color is darker
than 50% gray, pixels lighter than the blend color are replaced, and
pixels darker than the blend color do not change. This is useful for adding
special effects to an image.

 Screen

Looks at each channel's color information and multiplies the inverse of the blend
and base colors. The result color is always a lighter color. Screening with black
leaves the color unchanged. Screening with white produces white. The effect is
similar to projecting multiple photographic slides on top of each other.

 Soft Light

Darkens or lightens the colors, depending on the blend color. The effect is
similar to shining a diffused spotlight on the image.

Specifying opacity or flow

You can specify opacity or flow for the following tools:

 Opacity specifies the maximum amount of paint coverage applied by the

brush, pencil, clone stamp, and paint bucket tools.
 Flow specifies how quickly paint is applied by the brush tool.

To specify opacity or flow

Enter a value, or drag the slider for Opacity or Flow in the Options palette.

95
Opacity or flow can range from 1% to 100%. For transparent paint or a weak
effect, specify a low percentage value; for more opaque paint or a strong effect,
specify a high value.

2. Using the eyedropper tool

The eyedropper tool samples color to designate a new foreground or

background color. You can sample from the active image. You can also specify
the area sampled by the eyedropper tool. For example, you can set the
eyedropper to sample the color values of a 3-by-3-pixel area under the pointer.

To sample color with the eyedropper tool:

 Select the eyedropper tool from the Toolbox.

 In the Options palette, choose an option from the Sample Size menu.

Note: 3 by 3 Average or 5 by 5 Average to read the average value of the

specified number of pixels within the area you click.

 Click the area containing the color you want to copy.

3. Using the brush tool

Image Editor provides the brush tool to let you paint with the current foreground
color.

 Select the Brush tool from the Toolbox.

 Do one of the following in the Options palette:
 Click the triangle next to Brush, and set brush options: Diameter to
control the size of the brush. Hardness to control the size of the brush's
hard center
 Specify a blending mode(See Selecting a blending mode)
 Specify an opacity and a flow rate (See Specifying opacity or flow)
 Drag the image to paint.

4. Using the paint bucket tool

The paint bucket tool fills adjacent pixels that are similar in color value to the
pixels you click.

 Select the Brush tool from the Toolbox.

 Do one of the following in the Options palette:
 Specify a blending mode(See Selecting a blending mode)
 Specify an opacity (See Specifying opacity or flow)
 Specify a tolerance

96
 Note: The tolerance defines how similar in color a pixel must be to be filled.
Values can range from 0 to 255. A low tolerance fills pixels within a range of
color values very similar to the pixel you click. A high tolerance fills pixels
within a broader range.

 Click the part of the image you want to fill.

5. Using the dodge tool

The dodge tool is used to lighten areas of the image.

To use the dodge tool:

 Select the dodge tool .

 Do the following in the options palette:
 Set brush options: Diameter to control the size of the brush. (See Using
the brush tool)
 Select what to change in the image: Shadows to change the dark areas;
Highlights to change the light areas.
 Drag over the part of the image you want to modify.

6. Using the burn tool

The burn tool is used to darken areas of the image.

To use the burn tool:

 Select the burn tool .

 Do the following in the options palette:
 Set brush options: Diameter to control the size of the brush. Hardness
to control the size of the brush's hard center (See Using the brush tool)
 Select what to change in the image: Shadows to change the dark areas;
Highlights to change the light areas.
 Drag over the part of the image you want to modify.

7. Using the eraser tool

 Select the Eraser tool from the Toolbox.

 Do one of the following in the Options palette:
 Click the triangle next to Brush, and set brush options
 Specify an opacity and a flow rate (See Specifying opacity or flow).
 Drag the pointer over the area you want to erase.

8. Choosing foreground and background colors

97
You can use the Color Picker to select the foreground or background color by
choosing from a color spectrum or by defining colors numerically.

You can designate a new foreground or background color using the eyedropper
tool, the Color palette, or the Color Picker. (See Using the eyedropper tool and
Using the color palette)

The default foreground color is black, and the default background color is white.

To display the Color Picker:

Do one of the following:

 Click the foreground or background color selection box in the Toolbox.

 Click the active color selection box in the Color palette.

Flipping, Repairing and Cloning

 Flipping entire images

 Using the healing brush tool
 Using the clone stamp tool

1. Flipping entire images

 In the Toolbox, click or to flip the entire image horizontally or

vertically.
 To flip the image you select, click Rectangle tool or Lasso tool to select an
area, and click Flip tool or .

2. Using the spot healing brush tool

The spot healing brush tool effortlessly removes dust, scratches, blemishes, and
other flaws and automatically preserves the shading, lighting, and texture of the
original image.

To use the healing brush tool:

 Select the spot healing brush tool .

 Do the following in the options palette:
 Specify the diameter option to control the size of the brush.
 Specify the roundness option to control the ratio between the brush's
short and long axes.
 Press down Alt key and click an area to define a source to repair.

3. Using the clone stamp tool

98
The clone stamp tool takes a sample of an image, which you can then apply over
another image or part of the same image. Each stroke of the tool paints on more
of the sample.

To use the clone stamp tool:

 Select the clone stamp tool .

 Do one of the following in the Options palette:
 Click the triangle button next to Brush in the Options palette, and set
brush options: Diameter to control the size of the brush. Hardness to
control the size of the brush's hard center
 Specify a blending mode(See Selecting a blending mode)
 Specify opacity and a flow rate (See Specifying opacity or flow).
 Drag in the image.

Using Filters

1. On the menu bar, select the Filters menu.

2. Select an item from the drop-down menu to add an effect to the image.

Using the Function Palette

Most tools have options that are displayed in the tool options palette. The
options bar changes as different tools are selected. Some settings in the options
bar are common to several tools, and some are specific to one tool.

You can move the options bar anywhere in the work area.

To display the tool options palette:

Choose View > Image Toolbar > Function.

Brush Function palette

To move the options bar:

99
Drag the options bar by its title bar.

Using the Layer Palette

The Layers palette lets you set layer opacity, fill layers and choose a blending
mode.

Layer palette

Displaying the Layer palette

Choose View > Image Toolbar > Layer.

Setting layer opacity

A layer's opacity determines to what degree it obscures or reveals the layer

beneath it. A layer with 1% opacity appears nearly transparent, while one with
100% opacity appears completely opaque.

To specify opacity for a layer

1. Select a layer or layer set in the Layers palette.

2. In the Layer palette, enter a value in the Opacity text box or drag the Opacity
slider.

Using the Color Palette

The Color palette displays the color values for the current foreground and
background colors. Using the sliders in the Color palette, you can edit the
foreground and background colors according to several different color models.

Note: Image Editor uses RGB mode to work with images.

100
Color palette

To display the Color palette:

Choose View > Image Toolbar > Color.

To select the foreground or background color:

1. To edit the foreground or background color, make sure that its color selection
box is active (outlined in black). To make the foreground or background color
selection box active, click the box.
2. Do one of the following:
 Drag the color sliders. By default, the slider colors change as you drag.
 Enter values next to the color sliders.

Using the Histogram Palette

A histogram can tell you whether or not your image has been properly exposed,
whether the lighting is harsh or flat, and what adjustments will work best. This
can show you whether the image contains enough detail in the shadows (shown
in the left part of the histogram), midtones (shown in the middle),
and highlights (shown in the right part) to make a good correction.

Example Histogram

To display the histogram for an image:

Choose View > Image Toolbar > Histogram.

101
Quit Image Editor
1. Click the Close button on the upper right corner of the Image Editor
window.

2. You get a confirmation message asking you whether you want to save the
modified image to the PDF file. Click Yes to save the changes to the PDF file,
click No to abort the changes on the image and return to the Main window;
click Cancel to continue working in the Image Editor window.

102
Chapter 7 – Working on Graphics
Objects

A graphics object is an arbitrary shape made of straight lines, rectangles, and

cubic curves. A path may contain multiple sub-paths (or path segments). A path
object can be painted (filled and stroked), and the unpainted (“invisible”) path
objects are sometimes used as placeholders or to denote text bounds.

Setting Graphics Options

Before inserting graphics, you might like to preset some options so that you can
easily insert graphics with your personalized preferences.

To set graphics options, do the following:

 Select Edit > Options from the menu bar, or press Alt + O keyboard.
 In the pop-up Options dialog box, click Graphics.
 In the Graphics tab, change the values to suit your preferences.
 After you are done, click the Ok button. Click Restore Default button to
leave settings unchanged.

Note: After you exit the program, all the changes are restored to default.

Selecting Graphics Mode

Before modifying graphics objects, you can select to work in a graphics state, so
that you can easily and solely interact with those graphics objects without
affecting any other type of objects.

To select graphics state, do one of the following:

1. Select Path from the drop down list of Choose Selected Objects’ Type
in the Menu Bar.
2. Select Edit > Options. In the pop-up dialog box, select the Other tab, and
check “Path only” under Objects Selection Mode.

103
Inserting New Graphic Objects

With Advanced Editor, you can swiftly insert graphic objects by a simple and
useful Graphic Editor.

To insert graph objects, do the following:

1. Locate the page where you want to insert the image in your document, and
then do one of the following:
 Point to the Object toolbar, and click the Add Graphics Objects

button
 Select Object > Add Graphics on the Menu bar
 Use keyboard shortcut CTR+R
2. Your current Document window is switched to the Graphics Editor window
(see example 2)
3. Select one of path tools, and draw in the place where you want to insert the
graphics (see example 3)

4. After you are done, click the Save button to exit and get back to the
Document window.
5. You are back to the Document window, and the graphic object is inserted
(see example 4). You can adjust its size by dragging the sizing handles, or
change its fill/stroke color.

Example 1: Current Document Window

Example 2: Graphics Editor Window

104
Example 3: Drawing a Graphic object

Example 4: Inserted graphic in the Document window

105
Changing Graphics Properties

To alter line width

1. Click the graphics you want to change in your page (see example 1).
2. In the Path Properties tab, click the value field next to Line Width.
3. Input the value you want, and click any other place to change.

See also: Line Width in Path Properties.

Example:

① Selected Graphics with

Line Width value at 1

② In the value filed, we

input 10 to change the width

③ The result graphics with

line width at 10

106
To alter miter limit

1. Click the graphics you want to change in your page.

2. In the Path Properties tab, click the value field next to Miter Limit.
3. Input the value you want, and click any other place to change.

See also: Miter Limit in Path Properties.

To alter line cap style

1. Click the graphics you want to change in your page.

2. In the Path Properties tab, drop down the combo box next to Line Cap
Style.
3. Select a style you want.

See also: Line Cap Style in Path Properties.

To alter line join style

1. Click the graphics you want to change in your page.

2. In the Path Properties tab, drop down the combo box next to Line Join
Style.
3. Select a style you want.

See also: Line Join Style in Path Properties.

To alter line dash pattern

You can change the line to be a dashed or a solid pattern.

1. Click the graphics you want to change in your page (see example 1).
2. In the Path Properties tab, click the Dash value field, and click the edit
button next to it (see example 2).
3. In the Edit box, input any negative numbers in the Dash Count, and
change the Array value according to your preference (see example 3).
4. Click any other place for the change to take effect.
5. If you do not want a dashed line, input “0” in the Dash Count.

Example:

① Here, we click a round rectangle in

the Document window

107
 ② Click the Dash value field and

click Edit button

③ Here we input 3 in the Dash

Count, and 6 in the Array【0】，

5 in the Array【1】， and 4 in the
Array【2】

④ The result graphics with Dash

Count at 3.

To fill/stroke graphics color in RGB/CMYK

1. Click the graphics object you want to fill/stroke in your page.

2. In the Path Properties tab, click the text field next to Fill Color/Stroke
Color.
3. Click the button on the right to view current value.
4. Click the Edit button on the right, drag the color bar match the color.
5. After you done, click the button to make the change.

RGB Fill/Stroke Color Box CMYK Fill/Stroke Color Box

See Also: Setting Default Color for Objects

To change the fill type for graphics fill color

108
There are three different fill types to use, and Advanced Editor takes No Fill as a
default setting. If you find the text you selected cannot be filled, you must
change the fill type to Alternate or Winding type.

To change the fill type, do the following:

 Click the Path Properties tab in the Properties pane.

 Drop down the Fill Type box; and select a style of fill types.
 After you are done, click any other place for the changes to take effect.

See Also: Fill type in Path Properties.

To change the stroke type for graphics stroke color

Advanced Editor takes No Stroke as a default setting. If you find the text you
selected cannot be stroked, you must change the stroke type to Yes.

To change the stroke type, do the following:

1. Click the Path Properties tab in the Properties pane.

2. Drop down the Stroke Type box and select Yes.
3. After you are done, click any other place for the changes to take effect.

About the Graphics Editor

As you select to insert a graphic object in the Main window of Advanced Editor,
or double click a graphic object, you will be switched to the Graphics Editor
Window as shown in the following figure:

Graphics Editor Window

109
You can use the Path toolbar to add a line, rectangle, circle, or other shapes and
then you can change and enhance these objects with colors and borders in the
Main window.

When you are drawing a shape, it stays selected until you click elsewhere on the
page and a wireframe with sizing handles appears to let you adjust the size and
shape.

Note: Sizing handles are the small circles or squares that appear at the corners
and sides of a selected object. You drag these handles to change the size of the
object

When drawing a graphic shape, you can press the Ctrl + Z or Ctrl+ Y to undo or
redo your operation. After creating the graphics you intended, click the Save

and Exit tool on the Path toolbar to go back to the Main window.

A B C D E F G H I J K L M N

A. Line tool B. Rectangle tool C. Ellipse tool D. Round Rectangle tool E. Polygon
tool F. Polyline tool G. Polybezier tool H. Curve tool I. Delete tool J. Fit Window
tool K. Select tool L. Point Select tool M. Exit without Saving tool N. Save and
Exit tool

Note: If you don't see the Path toolbar in the program window, point to the
View menu and then click Path toolbar.

Drawing Graphics

To draw a straight line

1. Point to the Path toolbar and then click the Line tool .
2. Click a region in the document where you want to create the drawing and
draw the line.
3. Drag the handles to adjust the line size if necessary.
4. Click outside the shape when you are done to set the line.

To draw a rectangle

110
1. Point to the Path toolbar and then click the Rectangle tool to create a

square-cornered shape, or click the Rounded Rectangle tool to

create a round-cornered shape.
2. Click a region in the document where you want to create the drawing and
draw a rectangle.
3. Drag the sizing handle diagonally in the direction you want.

To draw an ellipse

1. Point to the Path toolbar and then click the Ellipse tool .
2. Drag the pointer to draw the ellipse.
3. Click outside the shape when you are done to set the ellipse.

To draw a polygon, polyline, or polybezier

 Point to the Path toolbar and then click the Polygon tool , Polyline

tool , or Polybezier tool .

 Drag the pointer to draw a straight line.
 Click once at each position where you want a new line segment to appear.
 Click outside the shape when you are done to set the shape.

To draw a curved line or a curved shape

1. Point to the Path toolbar and then click the Curved tool ;
2. Draw a straight line by dragging the pointer.
3. Click once at each position where you want a new line segment to appear.
4. Click outside the shape when you are done, and then drag the sizing handle
to adjust the curve.

Editing Graphics

You can use Image Editor to edit your graphics.

To edit graphics, do the following:

111
1. Double -click the image you want to edit in the Document window.
2. You will be switched to the Graphics Editor window.
3. In the Graphics Editor window, you can change the shape of the graphics, or
add another graphics object onto it.

4. After you are done, click the Save and Exit button to close the
Graphics Editor window and get back to your Document window.

To sketch the shape

1. Point to the Path toolbar and then click the Select tool .
2. Click the object you want to sketch.
3. Drag the sizing handle diagonally, horizontally, or vertically.

To adjust the view

 To fit the view, point to the Path toolbar, and click the Fit Window tool

.
 To zoom in/out the view, point to the Path toolbar, and click the zoom

in/out tool .
 To magnify or reduce the view in a percent degree, point to the Status
bar and drop down the Zoom box, and then select a percent.

To change the graphics

1. Point to the Path toolbar and then click the Select Point tool .
2. Click the graphics you want to change the shape of.
3. Drag the handles to change the graphic shape.

To resize the shape

1. Position the pointer over one of the sizing handles.

2. Drag the sizing handle until the object is the shape and size you want.

 To increase or decrease the size in one or more directions, drag the mouse
away from or toward the center.
 To maintain the object's proportions, drag one of the corner sizing handles.

112
To shear the graphics

1. Point to the Path toolbar and then click the Select tool .
2. Double-click the graphics you want to shear.
3. Drag the double arrow to shear the graphic shape.
4. Click outside the graphic shape to set the shearing.

To rotate the graphics

1. Point to the Path toolbar and then click the Select tool .
2. Double-click the graphics you want to rotate.
3. Drag the rotate handle on the graphics in the direction you want to
rotate it.
4. Click outside the graphic shape to set the rotation.

To delete the graphics

 Point to the Path toolbar and then click the Select tool .
 Click the graphics you want to delete.

 Click Delete tool on the path toolbar or press DEL key.

Quit Graphics Editor

1. Click the Close button on the upper right corner of the Graphics Editor
window.
2. You get a confirmation message asking you whether you want to save the
modified graphics to the PDF file. Click Yes to save the changes to the PDF
file, click No to abort the changes on the graphics and return to the Main
window; click Cancel to continue working in the Graphics Editor window.

113
Chapter 8 – Working on Shading
Objects

A shading starts at a certain point on the page with a given color and ends at a
second point with different colors. Shading is used for many purposes like
shadows, three dimensional appearances or simply to make a nice background
for a diagram.

A shading object has a smooth transition between colors across an area, and
Advanced Editor offers linear and radial gradients for users to choose.

Selecting Shading Mode

To modify shading objects, you can select to work in a shading state, so that you
can easily and solely interact with those shading objects without affecting any
other type of objects.

To select shading state, do one of the following:

1. Select Shading from the drop down list of Choose Selected Objects’ Type

in the Menu Bar.

2. Select Edit > Options. In the pop-up dialog box, select the Other tab, and
check “Shading only” under Objects Selection Mode.

Inserting New Shading

With Advanced Editor, you can insert shading objects easily, just do the
following:

1. Locate the page where you want to insert the shading objects in your PDF
document;

2. From the Insert Object toolbar, click Add Shading Objects button , or
select Object > Add Shading Objects on the Menu bar.
3. Your current Document window will be switched to the Shading Editor
window.
4. Select a tool from the Path Toolbar to draw a path anywhere within the
current page.
5. Select one shading color from the Select Shading Style which box popped up

114
 in Shading Editor Window.

6. Select Linear or Radial gradient, and drag mouse to draw a line

within the path area or anywhere in the current page of PDF document, so
that finish inserting new shading object.
7. Edit colors to a shading, such as clicking underneath the preview bar to add
colors, and clicking and dragging to move the colors and change the shading
effect.

8. Click the Save button to save and exit to get back to the Document
window.

Linear and Radial gradients

Path Toolbar

Preset shading color

Shading Object
Preview bar

About the Shading Editor

As you select to add a shading object in the Main window of Advanced Editor, or
double click a shading object, you will be switched to the Shading Editor
window.

115
 Shading Editor Window

Shading Object

Advanced Editor offers linear and radial gradients for users to choose. After
drawing a path, you can select one shading color from the Select Shading Style

box and choose Linear or Radial gradients from Shading Object.

Shading Object

Path Toolbar

Select a tool from the Path Toolbar to draw a path anywhere within the current
page, like adding a rectangle, circle, etc.

Note: More information about drawing path, please see Drawing Graphics.

Select Shading Style

Select Shading Style box will be popped up while switching to Shading Editor
window. Here you can preset and edit the shading color.

116
You can select the different shading colors from the Preset box, and to preview
the shading effect of the path you drew in the current document page, please do
one of the following:

 If you check Apply option , you can automatically preview the

shading effect of the path after choosing one shading color.

 If you don’t check Apply option, you should click Apply button
after selecting one shading color to preview the shading effect.

After presetting shading color, you can also edit the shading color, like add new
colors, delete existed colors, etc.

Move colors

Each color can be moved by clicking and dragging.

Change colors to a shading

Double click one color, and select the color you like in the Color dialog box. Also,

you can click the small square box and choose one color you like.

117
Add colors to a shading

Select one color you like at first and click underneath the preview bar. There will
be new colors added to a shading.

Delete colors to a shading

Click one color you want to delete, and click Delete button . Also, you
can move it away from the preview bar, the color will be removed from shading.

Drawing New Shading

Linear shading

Linear shading defines a field of color that varies along the line between the
start and end coordinates and extends infinitely away from the line. Linear is
just one form of interpolation that can be used to define the gradient fill of the
shading.

In the Shading Editor window, select a tool from the Path Toolbar to draw a path,

and select Linear on the Tool Bar and select one shading color in the Select
Shading Style box. Now you can drag the mouse to draw a line within the path
area or anywhere in the current page of PDF document.

Note: More information about drawing path, please see Drawing Graphics.

118
For linear shading, the start Shading Area
and end point are shown,
connected by a line. The Start Point
transition from one color to
another varies linearly
along the line. The color
gradient begins at the start End Point
point and finishes at the end
point.

You can drag either start or end point to move it individually, or drag the line to
move them both at the same time. This moving will change the shading effect.
Compare with Shading 1, Shading 2 is dragging the start point to move, Shading
3 is dragging the end point to move, and Shading 4 is dragging the line to move.

Shading 1 Shading 2 Shading 3 Shading 4

Select one shading color from the Select Shading Style to preset, and you can
edit shading color on the preview bar.

To preset different shading colors

You can select the different shading colors from the Preset box, and to preview
the shading effect in the shading area.

119
To edit shading colors

You can add new colors, delete existed colors, or move any colors.

Compare with shading 1, Shading 2 is dragging the color to move and changing
the shading color order, Shading 3 is adding new colors, and Shading 4 is
deleting the existed colors.

Shading 1 Shading 2 Shading 3 Shading 4

Note: For more information about presetting and editing shading colors, please
see Select Shading Style.

Radial shading

Radial shading defines a color gradient fill between two circles or cylinders. This
method is most commonly used to produce the visual effect of a
three-dimensional sphere or cone. Radial shading is accomplished by
one-dimensional interpolation along the radius of the circle, form the center of
the circle outward. The resulting path can be either circular or elliptical.

In the Shading Editor window, select a tool from the Path Toolbar to draw a path,

and select Radial on the Tool Bar and select one shading color in the Select
Shading Style dialog box. Now you can drag the mouse to draw a line within the
path area or anywhere in the current page of PDF document.

Note: More information about drawing path, please see Drawing Graphics.

120
For radial shading, both the
inner and outer circle is Inner Circle
shown, together with their
Inner Circle Center
centers. When first creating
Radial shading, the centers Outer Circle Center
are exactly on top of each
Outer Circle
other, and the inner circle
has no radius. Shading Area

To bring out the inner circle

When first creating radial shading, the inner circle has no radius; you really just
see one circle. To bring out the inner circle and let its radius be greater than zero,
first dissociate the circles’ centers by dragging the center point, then click and
drag the inner circle’s center point to bring out the inner circle you like.

Shading 1 Shading 2 Shading 3

To move one of the circles

To move one of the circles individually, click and drag the center point of the
circle you wish to move.

Compare with Shading 1, Shading 2 is dragging the inner circle’s center, and
Shading 3 is dragging the outer circle’s center.

121
 Shading 1 Shading 2 Shading 3

To move both circles

To move both inner circles and outer circles at the same time, just click and drag
the line which connects the two circles’ centers.

To resize the circles

To resize one of the circles, click and drag the circumference of the circle.

122
Editing a Shading

To edit an existed shading in the Shading Editor window, just do the following:

1. Double-click the shading you want to edit in the Document window, or select

the shading object and click Edit Object button in the Menu Bar.
2. You will be switched to the Shading Editor window.
3. In the Shading Editor window, you can change the shape of the shading area
and edit the shading colors.

4. After done, click the Save and Exit button to close the Shading Editor
window and get back to your Document window.

To sketch the shading objects

Click the Select tool and drag the sizing handle diagonally, horizontally,
and vertically to sketch the shading objects.

To adjust the shading objects’ shape

Click the Select Point tool and drag the handles to change the shading
area’s shape.

123
Note: There are four kinds of sizing handles, included yellow , green , blue
and red small square.

 The yellow small square is the start point of the path.

 The green one is the center point fo the path, click and drag it to move the
whole path.
 The blue one is to pull the endpoint which connects two curves.
 The red one will be shown if there are curves in the path, and it is to adjust
the curve which is conneted by two blue squares, and the bule squares are
adjacent to the red small square.

To edit the shading colors

Click one shading color to preset in the Select Shading Style, or edit colors on
the preview bar.

More information of editing shading colors, please see Select Shading Style.

To rotate the shading objects

 Click the Select tool and then double-click the path you want to
rotate.

 Drag the handle around the path to rotate the shading object.
 When finished, click outside the path shape to set the rotation.

 Also, you can change the Rotate values in the Properties

Pane in the Document window.

To shear the shading objects

 Click the Select tool and then double-click the path you want to shear.
 Drag the handle around the path to shear the shading object.
 When finished, click outside the path shape to set the shearing.

124
 Also, you can change the Shear values in the Properties

Pane in the Document window.

Quit Shading Editor window

To quit the Shading Editor window, just do the following:

1. Click the Close button on the upper right corner of the Shading Editor

window.
2. You get a confirmation message asking you whether you want to save the
modified shading to the PDF file. Click Yes to save the changes to the PDF file;
click No to abort the changes on the shading and return to the Main window;
click Cancel to continue working in the Shading Editor window.

3. Also, you can click Exit without save button on the Menu bar, if you just
want to exit and return to the Document window without saving any
changes to the PDF file

About shading properties

In the Document window, you can check the shading properties and modify the
related values in the Properties Pane.

Extend is an optional array of two Boolean values that specify whether or not to
extend the start and end colors past the start and endpoints, respectively. The
default value for each element of the array is true.

1. If the Extend Boolean values are true, the field may also extend infinitely far
along the line, past either or both endpoints, using the constant color of that
endpoint.
2. If the Extend Boolean values are false, the field may stop extending past

125
 either or both endpoints, using the constant color of that endpoint.

Setting the Extend values to “true” will extend the gradient fill towards the
drawing direction with the color where it leaves off or starts.

 In the shading object with “true true” Extend values, the start and end color
will separately extend to the fields past the start and end points.
 In the shading object with “false false” Extend values, the start and end
color will stop extending to the fields past the start and end points.
 In the shading object with “true false” Extend values, the start color will
extend to the field past the start point, and the end color will stop extending
the field past the end point.
 In the shading object with “false true” Extend values, the start color will
stop extending to the field past the start point, and the end color will extend
the field past the end point.

true true true false false true false false

true true true false false true false false

true true true false false true false false

126
Keyboard Shortcuts
There are number of keyboard shortcuts that you can use to speed up your
navigation within the Foxit PhantomPDF. You can both use the default keyboard
shortcuts and customize your own shortcuts.

Zoom out Alt + -

Zoom in Alt + +
Set to background Alt + 1
Set to foreground Alt + 2
Go to a specified page Ctrl + G
Load image Ctrl +I
Insert Text Ctrl + T
Insert Graphics Ctrl + R
Modify Object Ctrl + M
Optimize Alt + M
Import Font Alt + I
First page Alt + T
Next page Alt +N
Previous page Alt + P
Last Page Alt + L
Undo Ctrl +Z
Redo Ctrl +Y
Delete Selected object Delete
Page Delete Alt + Del
Move one point up , down, left, right arrows
Move ten point Ctrl +( up , down, left, right
arrows)
File top Home
File End End
Select All Ctrl + A
Copy Ctrl + C
Paste Ctrl + V
Cut Ctrl + X
New File Ctrl + N
File Print Ctrl + P
File Open Ctrl + O
Set Options Alt + O
Saving and exiting the in-place editing mode ESC
Fill a selection with the foreground color Alt + Delete
Fill a selection with the background color Ctrl + Delete
Deselect a selection Ctrl + D
127
Properties Ctrl + Alt + P
Save Ctrl + S
Optimize and Save As Alt + S
Search Ctrl + F
Bookmark Ctrl + Alt + B

128
Contact Us
Feel free to contact us should you need any information or have any problems
with our products. We are always here, ready to serve you better.

 Office Address:
Foxit® Corporation
42840 Christy Street. Suite 201
Fremont CA 94538
USA

 Mailing Address:
Foxit® Corporation
42840 Christy Street. Suite 201
Fremont CA 94538
USA

 Sales:
1-866-680-3668 (24/7)

 Support:
1-866-MYFOXIT or 1-866-693-6948 (24/7)

 Fax:
1-510-405-9288

 Website:
www.foxitsoftware.com

 E-mail:
Sales and Information - [email protected]

Technical Support - [email protected]

Marketing Service - [email protected]

129