Scribd
Upload
9 views

module-5 (IIR) Tutorial Problems

Uploaded by

kaushikvetri2.0
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
9 views

module-5 (IIR) Tutorial Problems

Uploaded by

kaushikvetri2.0
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

VARDHAMAN COLLEGE OF ENGINEERING

(AUTONOMOUS)
Affiliated to JNTUH, Approved by AICTE, Accredited by NAAC with A++ Grade, ISO 9001:2015 Certified
Kacharam, Shamshabad, Hyderabad – 501218, Telangana, India
B. Tech III Year II-Semester
(Regulations: VCE-R21)
DIGITAL SIGNAL PROCESSING
Tutorial Problems
Module 5
1. Convert the analog filter with system transfer function into a digital filter using the impulse
invariant transformation.

2
𝐻𝑎 (𝑠) =
(𝑆 + 3)2 + 4

2. Discuss about the design procedure for lowpass digital Butterworth IIR filter.
3. Design a Butterworth digital IIR low-pass filter using bilinear transformation with pass band
edge at 1000 Hz and stop band edge at 1500Hz for a sampling frequency of 5000Hz. The
filter is to have a pass band ripple of 0.5 dB and stop band ripple below 30dB.
4. Evaluate Butterworth digital filter coefficients using the bilinear transformation. The
specifications of the desired low-pass filter are:
𝜋
0.9 ≤ |𝐻 (𝑤)| ≤ 1; 0 ≤ 𝑤 ≤
2
3𝜋
|𝐻 (𝑤)| ≤ 0.2; ≤𝑤≤𝜋
4
with T = 1sec
5. Design IIR filter using impulse invariant technique for the following specifications:
𝜋
0.707 ≤ |𝐻 (𝑤)| ≤ 1; 0 ≤ 𝑤 ≤
2
3𝜋
|𝐻(𝑤)| ≤ 0.2; ≤𝑤≤𝜋
4
with T = 1sec
6. Evaluate the order of the lowpass butter worth filter using the bilinear transformation for
satisfying the following constraints
Passband: 0-400Hz Stopband: 2.1-4KHz
Passband ripple:2dB Stopband attenuation: 20dB
Sampling Frequency: 10KHz
7. Discuss about the design procedure for lowpass digital Chebyshev IIR filter.
8. Given the specifications ᾲp=3dB; ᾲS=16dB; fp=1KHZ and fs=2KHZ. Determine the order of
the filter using Chebyshev approximation and also find H(S).
9. What is warping effect? What is its effect on magnitude and phase response?
10. What are the characteristics of mapping technique from s-plane to z-plane?
Or
What are the properties that are maintained same in the transfer of analog filter into a digital
filter?

You might also like