0% found this document useful (0 votes)
8 views2 pages

Modelo

Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as RTF, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
8 views2 pages

Modelo

Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as RTF, PDF, TXT or read online on Scribd
You are on page 1/ 2

.

subckt Nos 1 2 3
LEVEL = 1
VTO = 0.7
GAMMA = 0.45
PHI = 0.9
NSUB = 9E+14
LD

Model generated on Oct 22, 96 * MODEL FORMAT:


SPICE3 * Symmetry POWER MOS Model (Version
1.0) * External Node Designations * Node 1 ->
Drain * Node 2 -> Gate * Node 3 -> Source M1 9 7
8 8 MM L=100u W=100u * Default values used in
MM: * The voltage-dependent capacitances are *
not included. Other default values are: * RS=0
RD=0 LD=0 CBD=0 CBS=0 CGBO=0 .MODEL MM
PMOS LEVEL=1 IS=1e-32 +VTO=-3.87971
LAMBDA=0.0503704 KP=0.713612
+CGSO=2.47152e-06 CGDO=1e-11 RS 8 3
0.116837 D1 1 3 MD .MODEL MD D IS=5e-21
RS=0.15039 N=1.5 BV=60 +IBV=10 EG=1.2
XTI=4 TT=1e-07 +CJO=4.40194e-10 VJ=1.63887
M=0.440757 FC=0.5 RDS 3 1 600000 RD 9 1
0.0001 RG 2 7 9.4415 D2 5 4 MD1 * Default values
used in MD1: * RS=0 EG=1.11 XTI=3.0 TT=0 *
BV=infinite IBV=1mA .MODEL MD1 D IS=1e-32
N=50 +CJO=1.96085e-10 VJ=0.665506
M=0.480463 FC=1e-08 D3 5 0 MD2 * Default
values used in MD2: * EG=1.11 XTI=3.0 TT=0
CJO=0 * BV=infinite IBV=1mA .MODEL MD2 D
IS=1e-10 N=0.4 RS=3.00002e-06 RL 5 10 1 FI2 7 9
VFI2 -1 VFI2 4 0 0 EV16 10 0 9 7 1 CAP 11 10
6.62636e-10 FI1 7 9 VFI1 -1 VFI1 11 6 0 RCAP 6 10
1 D4 6 0 MD3 * Default values used in MD3: *
EG=1.11 XTI=3.0 TT=0 CJO=0 * RS=0 BV=infinite
IBV=1mA .MODEL MD3 D IS=1e-10 N=0.4 .ENDS
irfl9014

You might also like