Electronics Tutorial
Electronics Tutorial
1. What do the letters NTC and PTC stand for with regards to passive components?
2. What is a varistor and what is it used for?
3. A capacitor is constructed from two conductive metal plates 30cm x 50cm which are
spaced 6mm apart from each other, and uses dry air as its only dielectric material.
Calculate the capacitance of the capacitor.
4. Describe the formation of N-type material
5. How is a PN junction created?
6. Explain the differences between a centre tapped full wave rectifier and a full wave
bridge rectifier.
7. What is the mean output current from both the half wave and full wave rectifiers.
8. What use is a Zener diode? Draw the characteristics of the zener diode
9. For an NPN transistor in common emitter mode, draw and explain the static and
output characteristics. Show which region is the cut-off, saturation and active.
10. What are the functions of the base, emitter and collector load resistors in common
emitter amplifier?
11. What is a UJT? Explain the basic operation.
12. With reference to the diagram below, R = 2KOhms, RL = 5Kohms, Vz = 12V and the
supply voltage Ei = 27V. Calculate the current through the Zener diode.