1

Sai Nath University

Assignment For Diploma in Mechanical Engineering 3rd Sem.

The Assignment will consist of two parts, A and B. Part A will have 5 short answer
questions(40-60 words) of 4 marks each. Part B will have 2 long answer questions of
10 marks each

All questions are compulsory.

These Assignments should be completed and submitted in written form by the student to
his/her respective Faculty/ Examiners. Assignment Submission Dates are:

 DEC

List Of Suggested Questions

The list of suggested questions are for students to practice. Although optional, we
recommend that students solve these questions, as they will help them in preparing for
exams as well as in clearing the important concepts of the subject.

List of Practical and suggested practical’s

The list of practical’s should be done by the students in their Lab Sessions. These are the
basic practical’s, which each student should be able to do himself independently. While
the list of suggested practicals are optional, but it is recommended that students should
perform those practical so as to have a thorough knowledge of the subject

Education Delivery Schedule (EDS)

As per University Semester scheme, the minimum contact hours of each paper has
been Divided into two hours theory and practical class.
The faculty will maintain this attendance paper wise for his/her batch.

1
 2

Subject Code Subject Name

DEME STRENGTH OF MATERIALS

DEME THERMODYNAMICS

DEME BASICS OF E.E ENGG.

DEME WORKSHOP TECHNOLOGY-1

DEME MACHINE DRAWING

DEME WORKSHOP PRACTICE - I

2
 3

SAI NATH UNIVERSITY

Cover page of Assignment

ID NUMBER ……………………………………

NAME ……………………………………

COURSE Diploma Engineering ……………

STREAM Mechanical………………………………

SEM 3rd …………………………………

SUBJECT CODE ……………………………………

SUBJECT NAME ……………………………………

Assignments will be completed by the Student in his/her own handwriting.

3
 4

DEME

STRENGTH OF MATERIALS
Part A

Q.1 Differentiate between strain energy and shear strain energy.

Q.2 what is stress.classify the type of stress.
Q.3 What is hook’s law.Explain the stress strain diagram.
Q.4 Classify the type of beam and loading with diagram.
Q.5 What is stiffness and angle of twist.

PartB
Q.6 Draw the shear force and bending moment diagram of
cantilever beam.

Q.7 What is difference between open and closed coil spring.

4
 5

DEME
THERMODYNAMICS
Part A
1. What is a thermodynamic cycle ? What do you understand by homogeneous
and heterogeneous systems ? Give examples. What are intensive and
extensive properties ?.
2. Give the Clausius' statement of the second law. What is a PMM2 ? Why is it
impossible ? Explain.
3. Write short notes on any four of the following :
4. (a) Point function 2.
(b) Quasi-static process (c) Specific heat at constant pressure (Cp) (d)
Irreversibility (e) Availability (0 Heat engine
5. What is entropy ? What is the principle of Increase of Entropy ? Explain.
6. Explain first law of thermodynamics with jules experiments.
Part B
1. Derive expression for gas constant.
2. Derive relation between sp.heat at constant pressure (Cp) and sp. Heat at
constant volume (Cv).
3. What is a thermodynamic cycle ? What do you understand by
homogeneous and heterogeneous systems ? Give examples. What are
intensive and extensive properties ?
4. What is ideal gas? Derive the expression for gas constant and what is the numeric
value of gas constant.
5. State whether the following statements are true or false :
(a) Energy can flow in and out of a dosed system, but mass cannot.
(b) Mixture of ice and water is a heterogeneous system.
(c) Amount of work done is a point function
(d) The cyclic integral of a thermodynornic property is always zero.
(e) It is not possible to construct a PMM1.

5
 6

DEME
BASICS OF E.E ENGG.

Part A

Q.1 write the difference between AC and DC supply

Q.2 drive the EMF equation of transformer

Q.3 draw the key diagram three phase transmission and distribution system.

Q.4 what is electrical shock ? write the precaution.

Q.5 write the classification of fuses

Part B
Q.6 what is semiconductor ? explain types.

Q.7 explain the working of NPN and PNP transistor.

6
 7

DEME
WORKSHOP TECHNOLOGY-1
Part A
Q.1 Classification of welding processes.Explain the advantage and
limitations of welding.
Q.2 Explain the arc welding with neat diagram.
Q.3 Explain the type of welding defect and inspection of welding defect.
Q.4 Explain the moulding sand properties and types of molding boxes.
Q.5 Explain the working of injection moulding machine.

Part B

Q.6 Explain the types of presses and type of dies.

Q.7 Explain the forging processes

7
 8

DEME
MACHINE DRAWING
Part A
Q.1 What is limits and explain the types of limits.
Q.2 What is fits and explain the types of fits with diagram.
Q.3 Explain the types of lines with neat diagram.
Q.4 What is deviation.Explain the types of deviation.
Q.5 draw the universal coupling(assembly) in sheets.

Part B
Q.6 Drawing the mechanical screw jack in sheets.
Q.7 Draw the lathe tool holder of the sheets.

8
 9

DEME
WORKSHOP PRACTICE - 1
Instructions for Laboratory

1. The objective of the laboratory is learning.

2. The experiments are designed to illustrate phenomena in different areas of
Workshop and to expose you to uses of instruments. Conduct the job with
interest and an attitude of learning.
3. You need to come well prepared for the job.
4. Work quietly and carefully (the whole purpose of experimentation is to make
reliable measurements!) and equally share the work with your partners.
5. All presentations of job and diagram should be neatly and carefully done.
6. Diagrams should be neatly drawn with pencil. Always display units.
7. Come equipped with scales, pencils etc.
8. Do not fiddle idly with apparatus. Handle instruments with care. Report any
breakage to the Instructor. Return all the equipment you have signed out for
the purpose of your experiment.

Part A

Q(1)- What is the angle in a single and a double cut?

Q(2)- Classify different types of files.

Q(3)- List all specifications you need to identify a file in a market.

Q(4)-How do we classify files on the basis of cut? Which type of file is

used for softer/harder metals: single cut or double cut and why?

Q(5)-List all specifications you need to identify a file in a market

Part B

Q(1) -Define NOTCHING, BLANKING & PUNCHING.

Q(2)- Difference between piercing and punching?