Flammability

Burning Characteristics of Fibers
The way a fabric burns depends partly on its fiber content. The Table below describes typical burning characteristics of fibers, ranking them from the most to least hazardous.
Natural Cellulosic Fibers Cotton/Linen Burn with a yellow flame, light smoke, and have glowing embers. Cellulosic fibers do not melt or draw away from flames. Manufactured Cellulosic Fibers can burn quickly when ignited, but they behave somewhat differently as they burn. Rayon/Lyocell Burn similarly to cotton and linen, except they may shrink up and become tighter. Acetate Burns with a rapid flame and melts when burning. May melt and pull away from small flames without igniting. Melted area may drip off clothing carrying flames with it. When flames have died out, the hot, molten plastic residue is difficult to remove. Synthetics may catch fire quickly or shrink from the flame initially, but ultimately, they will sputter, flame, and melt to the skin or the flaming melt will drop to the floor. Acrylic Burns similarly to acetate, except that it burns with a very heavy dense black smoke. It drips excessively. Nylon, Polyester, Spandex, Lastol, and Olefin, Burn slowly and melt when burning. May melt and pull away from small flames without igniting. Melted area may drip off clothing carrying flames with it but not to the extent of acetate and acrylic.
Protein fibers are difficult to ignite. They may self-extinguish, but this varies depending on the closeness of the weave or knit (fabric density) and other finish treatments. Wool Burn slowly and are difficult to ignite. May self and Silk extinguish Flame Resistant Fabrics are difficult to ignite, burn slowly and go out when the source of the flame is removed. Modacrylic Burn very slowly with melting. May melt and and Saran pull away from small flames without igniting. Self extinguishes. Aramid, Char but do not burn novoloid, and vinyon
Fabrics that are a blend of two or more fibers do not burn in the same way as either fiber. Sometimes, blends are more dangerous than either fiber. For example, fabrics of 50 percent cotton and 50 percent polyester tend to burn longer than a similar fabric of either cotton or polyester. The way a fabric is made (knit, weave, lace, etc.) affects how it burns. Heavy close structures ignite with difficulty and burn more slowly than light, thin, or open fabrics. In general, summer weight clothing is more likely to catch fire than winter weight fabrics. However, heavy weight fabrics burn longer when ignited, because there is more flammable material present. Fabrics with more of the fiber surface area exposed to air have more oxygen available to support burning and therefore burn more easily. Thus, thin, gauzy fabrics, lace, or brushed fabrics can be very flammable. Fabrics with a napped or brushed surface of fine fibers can catch fire easily because of the greater amount of fiber surface exposed to oxygen in the air.
Flammable Fabric Facts

All fabrics will burn, but some are more combustible than others. Untreated natural fibers such as cotton, linen and silk burn more readily than wool, which is more difficult to ignite and burns with a low flame velocity. The weight and weave of the fabric will affect how easily the material will ignite and burn. Recommended fabrics are materials with a tight weave. Heavy, tight-weave fabrics will burn more slowly than loose-weave, light fabrics of the same material. The surface texture of the fabric also affects flammability. Fabrics with long, loose, fluffy pile or "brushed" nap will ignite more readily than fabrics with a hard, tight surface and, in some cases, will result in flames flashing across the fabric surface. Most synthetic fabrics, such as nylon, acrylic or polyester resist ignition. However, once ignited, the fabrics melt. This hot, sticky, melted substance causes localized and extremely severe burns. When natural and synthetic fibers are blended, the hazard may increase because the combination of high rate of burning and fabric melting usually will result in serious burns. In some cases, the hazard may be greater than that of either fabric individually. Curtains, draperies and other articles in the home can have their burning rates reduced with flame retardants applied through chemical treatment. Such flame-retardant treatment after manufacturing is not recommended for clothing. The design of clothing also may influence the flammability of the garment. Full, long and loose garments tend to ignite easily and have a higher rate of burning since more material is exposed to the atmosphere than with close-fitting garments. Flame-retardant materials
used in garments require special laundering to maintain the flame-retardant effectiveness. Flame-retardant materials should be washed only with standard detergents. Clothing labels usually provide adequate information about the care of the garment. Recommended clothing for minimum flammability would be sturdy jeans, tight-fitting jerseys, blouses without frills, jersey pajamas with no ruffled nightgowns, clothes with tight-fitting or short sleeves, clothes made from flame-retardant fabrics, sweaters, shirts and dresses that are not loose, flowing or too big. Clothing made from flame-retardant fabric is recommended especially for the elderly. In terms of flammability, silk may be the worst with a high burning rate, which may be increased by the dyes and other additives to provide color. Cotton and linen also have a high burning rate but this can be alleviated by the application of flame-retardant chemical additives. Acetate and triacetate are as flammable or slightly less flammable than cotton. However, they can be made flame-retardant with chemical treatment. Nylon, polyester and acrylic tend to be slow to ignite but, once ignited, severe melting and dripping occurs. Wool is comparatively flame-retardant. If ignited, it usually has a low burning rate and may self-extinguish.

Flammability

Uploaded by

Copyright:

Available Formats

Flammability

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Flammability

Uploaded by

Copyright:

Available Formats

Burning Characteristics of Fibers

Flammable Fabric Facts

You might also like