Scribd
Upload
60 views5 pages

POK3R User Manual

Uploaded by

rallibasoddo-3063
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
60 views5 pages

POK3R User Manual

Uploaded by

rallibasoddo-3063
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

!

POK3R User manual

The Vortexgear POK3R is the perfect solution for limited space in situations. It's
integrating 3 kind of layout. Also features 3 layers customization options individually
programmable key codes and LEDs, all easily set through what you want.

Main Features:
1.!ANSI or ISO layout with 60% size
2.!Cherry MX inside
3.!Arbitrary programming key code and LED colors
4.!ABS double shot Keycaps
5.!3 layers customization
6.!Built-up 3 kind of layout (Qwerty, Dvorak, Colemak)
7.!Metal bezel

Package Content:
1.!Keyboard x 1
2.!USB Cable x 1

Enjoy now for this fantastic tool and your typing feeling.
!

Keycode Programming Instructions*1:


Step 1. Choose a layer (Fn+<,> or ? key) you want to edit the keycodes.
Step 2. Press Fn + Right CTRL to enter the programming mode (Spacebar right LED steadily lit)
Step 3. Select a desire key you want to program (Spacebar right LED flashing)
Step 4. Key in the programming contents and then press Pn(Spacebar right LED steadily lit again)
Step 5. Repeat step 2 and step 3 to program other keys.
Step 6. Press Fn + Right CTRL to exit programming mode (Spacebar right LED off)

More:
· Support Fn layer programming, you can select the Fn combination key (e.g., Fn + A) to program it
· Support time delay, press 15ms key (Fn + T) each time to delay 15ms, press 0.1s key (Fn + G) each time
to delay 0.1s, press 0.5s key (Fn + B) each time to delay 0.5s. Consecutive delay will add up but will only
be counted as 1 key stroke.
· Every key can program up to 32 key strokes.
· If there is no key pressed for 15 sec in programming mode, it will back to normal mode.

Note:
*1 Default layer, R_ctrl, M,<,> and ? keys are fixed can’t be programmed.

Restore to factory default:


Current layer:
Press and hold Fn + R
All layers:
Press and hold both Alt keys, it will clean all the layers’ program key codes.

Remark:
1. When you reset the current layer or all layers, the spacebar left LED will flash at the after 5 seconds then it
will return to default.
2. If you had changed the Fn position and forgot where it was. You still can press the original position of Fn +
R to restore it.
!

Fn General keys Remark


ESC `

1 F1

2 F2

3 F3

4 F4

5 F5

6 F6

7 F7

8 F8

9 F9

0 F10

-_ F11

=+ F12

I ↑
Fn + = Key code change
J ←

K ↓

L →

P PrtSc

[{ ScrLk

]} Pause

Z APP

H Home

N End

U PgUp

O PgDn

Backspace Del

“’ Del

;: Ins
!

Switching Layer Remark


M Default Spacebar left LED off

Spacebar left LED


<, Layer 2
showing RED color.
Fn + = Spacebar left LED
>. Layer 3
showing Green color

Spacebar left LED


?/ Layer 4
showing Blue color

Multimedia key function Remark


Q Previous

W Pause/Play

E Next
Fn + =
S Volume -

D Volume +

F Mute

Monochromatic Backlit function Remark


X LED on/off and swap LED modes
C Light Down Single color LEDs
Fn + =
only
V Light Up
!

DIP Switch function descriptions:


SW 1 SW 2 Layout Remark

ON ON = Colemak

ON OFF = Dvorak
Default = OFF
OFF ON = Qwerty

OFF OFF = Qwerty

ON OFF Remark

SW 3 CapsLock = Fn CapsLock = CapsLock Default = OFF

Change Fn & Pn R_CTRL Shall not be


SW 4
Fn & Pn at any position at original position changed to Fn or Pn

Others:
1. Fn + Shift + ESC = ~

2. L_Win + R_Alt + Spacebar:


The bottom right corner as arrow keys.

You might also like