Scribd
Upload
13 views3 pages

1.A. Colomn Load

-

Uploaded by

Tedi Rustiandi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
13 views3 pages

1.A. Colomn Load

-

Uploaded by

Tedi Rustiandi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

1.A.

COLOMN LOAD
Axial Force Pu = 3215 N
Moment Mu = 15514900 Nmm
Shrear Load Vu = 1739 N
1.B. BWRO
Thickness, ht = 12 mm
1.C. BASE PLATE
Yield stress of steel, fy = 250 MPa
p
Ultimate stress of steel, fu = 420 MPa
plate width, B= 210 mm
plate length, L= 200 mm
Thickness of plte tp = 14 mm
Concreate compressive strenght, f c' = 28 MPa

1.D. ANCHOR
b
Tensile stress at break of bolt, fu = 500 MPa
Yield stress of bolt anchor, fy = 440 MPa
Diameter of bolt anchor, d= 16 mm
Number of anchor, tensile side, nt = 2 bh
Number of anchor, compress side, nc = 2 bh
eccentricity of load, e = 4826 mm
Bolt distance to the center of the colomn section, f = 150 mm
Leng of bolt anchor embedded in concreate La = 200 mm

1.E. STRENGHT REDUCTION FACTOR


Compressive strenght reduction factor fc = 0.75
Flexural strenght reduction factor fb = 0.9
Anchor shear strenght reduction factor ff = 0.75
Anchor tensile strenght reduction factor ft = 0.75

2.LOAD ECCENTRICITY
Tensile force on bolt anchor, Pt = Pu x ec/et = 3482.916667 N
Total compressive force on plate Puc =Pu + Pt = 6698 N
Total number of bolt anchor, n = nt + nc = 4 bh
h = h t - tf = 0 mm
et = f + h / 2 = 156 mm
et = f - h / 2 = 144 mm
3.TENSILE FORCE ON ANCHOR BOLTS
Tensile force in break of bolt, Tu1 = Pt / nct = 1741 N
Bolt breaking tensile stress, fuᵇ = 500 MPa
Bolt anchor cross-sectional area, Ab = π / 4 x d²= 201 mm2
Tensile strenght reduction factor, ɸt = 0.75
Nominal tensile resistance of bolt anchor Tn = 0.75 x Ab x fuᵇ = 75398 N
Bolt anchor tensile resistance, ɸ x Tn = 56549 N
Syarat yang harus dipenuhi :
Tu1 ≤ ɸ x Tn =
1741 < 56549 → SAFE (OK)

4.SHEAR FORCE IN BOLT ANCHOR


Shear force at bolt anchor, Vu1 = Vu / nct = 870 N
Tensile stress at break of bolt, fuᵇ = 500 MPa
Total shear cross section, m= 1
shear plane factor, r1 = 0.40
Coross-sectional area of bolt anchor, Ab = π / 4 x d² = 201 mm2
Shear strenght reduction factor, ɸf = 0.75
Nominal shear resistance, Vn = r1 x m x Ab x fuᵇ = 40212 N
Shear resistance of bolt anchor, ɸ x Vn = 30159 N
Condition must be met :
Vu1 ≤ ɸ x Vn =
870 < 30159 → SAFE (OK)

5.FULCRUM FORCE ON ANCHOR BOLT


Bearing force on bolt anchor, Ru1 = Vu1= 870 N
Bolt diameter , d= 16 mm
Thickness of fulcrum plate, t = 14 mm
Tensile stress at break of plate fuᵖ = 420 MPa
reduction factor of bearing strenght, ɸf = 0.75
Nominal bearing resistance, Rn = 2.4 x d x t x fuᵖ = 225792 N
bolt anchor fulcrum resistance, ɸ x Rn = 169344 N
Condition must be met :
Ru1 ≤ ɸ x Rn =
870 < 169344 → SAFE (OK)
6.COMBINATION OF SHEAR AND TENSILE
Stress constant for high quality bolts f1 = 500 MPa
f2 = 440 MPa
shear plane factor, r2 = 1.9
shear stress due to factired load, fuv = Vu / ( n x Ab) = 1.081 MPa
Shear strenght of bolt anchor, ɸf x r1 x m x fuᵇ = 150.00 MPa
Condition must be met :
fuv ≤ ɸf x r1 x m x fuᵇ
1.081 < 150 → SAFE (OK)
Tensile force due to factired load Tu1= 1741 N
bolt anchor tensile resistance, ɸf x Tn = ɸf x f1 x Ab = 75398 N
Condition must be met :
Tu1 ≤ ɸf x Tn = ɸf x f1 x Ab
1741.458 < 75398 → SAFE (OK)
bolt anchor tensile strenght, ft = 0.75 x fuᵇ = 375 MPa
combination stress limit, f1 - (r2 x fuv )= 498 MPa
f2 = 621 MPa
Condition must be met :
ft ≤ f1 - (r2 x fuv)
375.000 < 498 → SAFE (OK)
Condition must be met :
ft ≤ f2
375.000 < 621 → SAFE (OK)

7.ANCHOR LENGTH CONTROL


the length of the planting anchor used, La= 200 mm
Concreate compressive strenght fc' = 28 MPa
Yield stress of steel fy = 250 MPa
Diameter anchir bolt, d = 16 mm
minimum allowed for anchor length
Lmin = fy / ( 4 x sqrt(fc') x d = 189 mm

Condition must be met :


Lmin ≤ La
189 < 200 → SAFE (OK)

You might also like