Combinador
Combinador
Combinador
50 - 1000 MHz Resilience from dual Signal monitoring Local Monitoring via
operating frequency redundant amplifiers via –20dB monitor port front panel status LEDs
range (OPT-R) for amplifier & PSU
V 1.0 E&OE
Technical specifications and operating parameters
RF Parameters Environmental
Capacity 8 way Combiner Operating temperature 0 to 50˚C
50 to 1000MHz (IF)
Frequency Location Indoor use only
Amplification Single path amplifier (standard model) System Control & Alarms
Dual redundant amplifier Local Control Via Front Panel LCD
Options OPT-R Selectable hot or cold standby, 1:1 redundancy with auto switch-
over based on amplifier current monitoring. Via RJ45 Ethernet port, TCP/IP, SNMP & Web
Remote Control
Typical 30 dB 30 dB 30 dB 30 dB 30 dB browser interface.
Isolation at
70MHz Minimum 20 dB 20 dB 20 dB 20 dB 20 dB Indication LEDs with an SMA monitor port (on
Local front panel)
Typical 21 dB 21 dB 21 dB 21 dB 21 dB
Isolation at PSU and Summary dry contact alarms.
1000MHz 16 dB 16 dB 16 dB 16 dB 16 dB Monitoring
Minimum Alarms: Dry contact, change-over via 9-way D-
Noise Figure 24 dB Remote type. Full status and alarms are also available
via the Ethernet interface.
Output 1dB GCP +10 dBm
Note 1: The specification is subject to regular reviews and will be updated from time to time as part of our continuing product development and improved spec accuracy.
Note 2: Operation beyond the quoted limits stated above may cause instantaneous and permanent damage.