TSW210

Copyright © 2024, UAB TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by UAB TELTONIKA NETWORKS without prior notice.
 DATASHEET // TSW210

HARDWARE

FRONT VIEW

Power socket Ethernet LEDs SFP ports

SFP status LEDs

GE

Power LED Ethernet ports

BACK VIEW

Integrated Grounding
DIN Rail screw

RJ45 LED MEANING

Orange LED on: link established

10/100 Mbps Green LED on: link established
Orange LED blinking: active connection 1000Mbps

POWER SOCKET PINOUT

Power/Red wire Ground/Black wire

Copyright © 2024, UAB TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by UAB TELTONIKA NETWORKS without prior notice. 2
 DATASHEET // TSW210

FEATURES

ETHERNET
LAN 8 x ETH ports, 10/100/1000 Mbps, supports auto MDI/MDIX crossover

Fiber 2 x SFP ports

IEEE 802.3 series standards 802.3i, 802.3u, 802.3ab, 802.3x, 802.3az

PERFORMANCE SPECIFICATIONS
Bandwidth (Non-blocking) 20 Gbps

Packer buffer 128 KB

MAC address table size 2K entries

Jumbo frame support 9216 bytes

POWER
Connector 2-pin industrial DC power socket

Input voltage range 7 – 57 VDC

Power consumption Idle: ~1.03 W / Max: 3.71 W

PHYSICAL INTERFACES
Ethernet 8 x RJ45 ports, 10/100/1000 Mbps

Fiber 2 x SFP ports

Status LEDs 1 x Power LED, 16 x ETH status LEDs 2 x SFP status LEDs

Power 1 x 2-pin industrial DC power socket

Other 1 x Grounding screw

PHYSICAL SPECIFICATION
Casing material Full aluminum housing

Dimensions (W x H x D) 132 x 44.2 x 95.1 mm

Weight 500 g

Mounting options Integrated DIN rail bracket, wall mount, flat surface (additional kit needed)

OPERATING ENVIRONMENT
Operating temperature -40 °C to 75 °C

Operating humidity 10% to 90% non-condensing

Ingress Protection Rating IP30

REGULATORY & TYPE APPROVALS

Regulatory CE, UKCA, CITC, ANRT, FCC, IC, RCM, CB

EMC EMISSIONS & IMMUNITY

EN 55032:2015 + A1:2020
EN 55035:2017 + A11:2020
Standards
EN IEC 61000-3-2:2019 + A1:2021
EN 61000-3-3:2013 + A1:2019

ESD EN 61000-4-2:2009

EFT EN 61000-4-4:2012

Surge Immunity
EN 61000-4-5:2014 + A1:2017
(AC Mains Power Port)
CS EN 61000-4-6:2014

DIP EN IEC 61000-4-11:2020

SAFETY
IEC 62368-1:2018
Standards
EN IEC 62368-1:2020+A11:2020

Copyright © 2024, UAB TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by UAB TELTONIKA NETWORKS without prior notice. 3
 DATASHEET // TSW210

STANDARD PACKAGE*

• TSW210
• QSG (Quick Start Guide)
• Packaging box

TSW210 QSG

* Standard package contents may differ based on standard order codes.

CLASSIFICATION CODES
HS Code: 851762
HTS: 8517.62.00

For more information on all available packaging options – please contact us directly.

AVAILABLE VERSIONS
HARDWARE VERSION SUPPORTED FREQUENCIES STANDARD ORDER CODE / PACKAGE CONTAINS

TSW210000010 / Standard package

TSW210 ****** N/A
TSW210000020 / Mass packing code

Copyright © 2024, UAB TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by UAB TELTONIKA NETWORKS without prior notice. 4
 DATASHEET // TSW210

TSW210 SPATIAL MEASUREMENTS

MAIN MEASUREMENTS
W x H x D dimensions for TSW210:
Device housing*: 132 x 44.2 x 95.1 mm
Box: 173 x 71 x 148 mm
*Housing measurements are presented without antenna connectors and screws; for measurements of other device elements look to the sections below.

TOP VIEW
The figure below depicts the measurements of TSW210 and its components as seen from the top:

RIGHT VIEW
The figure below depicts the measurements of TSW210 and its components as seen from the right side:

Copyright © 2024, UAB TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by UAB TELTONIKA NETWORKS without prior notice. 5
 DATASHEET // TSW210

FRONT VIEW
The figure below depicts the measurements of TSW210 and its components as seen from the front panel side:

REAR VIEW
The figure below depicts the measurements of TSW210 and its components as seen from the back panel side:

Copyright © 2024, UAB TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by UAB TELTONIKA NETWORKS without prior notice. 6
 DATASHEET // TSW210

MOUNTING SPACE REQUIREMENTS

The figure below depicts an approximation of the device's dimensions when cables and antennas are attached:

Copyright © 2024, UAB TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by UAB TELTONIKA NETWORKS without prior notice. 7
 DATASHEET // TSW210

DIN RAIL
The scheme below depicts protrusion measurements of an attached DIN Rail:

Copyright © 2024, UAB TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by UAB TELTONIKA NETWORKS without prior notice. 8