03 28 64 98 09

[email protected]
www.dbmoteurs.fr

tAD1341/1342/1343ge-B
12.78 liter, in-line 6 cylinder

TAD1341GE-B, TAD1342GE-B and TAD1343GE-B are The TAD1341GE-B, TAD1342GE-B and TAD1343GE-B are
powerful, reliable and economical Generating Set Diesel emission certified. An electronically controlled viscous fan drive is
Engines built on the dependable in-line six design. available giving substantially lower noise and fuel consumption.
Durability and low noise Easy service and maintenance
Designed for easiest, fastest and most economical installation. Easily accessible service and maintenance points contribute to the
Field tested to ensure highest standard of durability and long life. ease of service of the engine.
Well-balanced to produce smooth and vibration-free operation
with low noise level. • Excellent load acceptance
To maintain a controlled working temperature in cylinders and • Highly efficient cooling system
combustion chambers, the engine is equipped with piston cooling.
• RoHS2 compliant
The engine is also fitted with replaceable cylinder liners and valve
seats/guides to ensure maximum durability and service life of the • Dual Speed 1500/1800 rpm
engine.
• EMS 2.4
Low exhaust emission
The state of the art, high-tech injection and charging system with • EU Stage 2 emission certified
low internal losses contributes to excellent combustion and low
fuel consumption. • Wide range of optional equipment including visco fan

50 Hz / 1500 rpm 60 Hz / 1800 rpm

Continuous Prime Standby Continuous Prime Standby
power power power power power power
kWm kWe kVA kWm kWe kVA kWm kWe kVA kWm kWe kVA kWm kWe kVA kWm kWe kVA
TAD1341GE-B 206 191 239 271 252 315 298 277 346 221 205 257 287 267 334 317 295 369
TAD1342GE-B 227 212 264 303 282 352 333 310 387 259 241 301 345 321 401 377 351 438
TAD1343GE-B 244 227 284 325 302 378 356 331 414 265 246 308 353 328 410 388 361 451

Generator efficiency (typical): 93%

kWm = kiloWatt mechanical, net with fan*; kWe = kiloWatt electrical = kWm x Generator eff.; kVA = kiloVoltAmpere calculations based on a 0.8 power factor = kWe / 0.8
1 kW = 1 hp x 1.36; 1 hp = 1 kW x 0.7355
*) According to technical data
tAD1341/1342/1343ge-B
12.78 liter, in-line 6 cylinder

Technical data Technical description

Configuration and no. of cylinders............................................................. in-line 6 Engine and block
Method of operation.................................................................................. 4-stroke – Optimized cast iron cylinder block with optimum distribution of forces
Bore, mm (in.)............................................................................................131 (5.16) without the block being unnecessary heavy.
Stroke, mm (in.)....................................................................................... 158 (6.22) – Wet, replaceable cylinder liners
Displacement, l (in³).............................................................................. 12.78 (780) – Piston cooling for low piston temperature and reduced ring tempera-
Compression ratio............................................................................................18.1:1 ture
Wet weight, kg (lb)............................................................................... 1325 (2921) – Tapered connecting rods for increased piston lifetime
Wet weight with Gen Pac, kg (lb)...................................................... 1790 (3946) – Crankshaft induction hardened bearing surfaces and fillets with seven
main bearings for moderate load on main and high-end bearings
Performance TAD1341GE-B TAD1342GE-B TAD1343GE-B – Case hardened and Nitrocarburized transmission gears for heavy duty
rpm 1500 1800 1500 1800 1500 1800 operation
– Keystone top compression rings for long service life
Prime 271 287 303 345 325 353
Power, kW (hp) (369) (390) (412) (469) (442) (480) – Viscous type crankshaft vibration damper to withstand single bearing
Standby 298 317 333 377 356 388 alternator torsional vibrations
Power, kW (hp) (405) (431) (453) (513) (484) (528) – Replaceable valve guides and valve seats
– Over head camshaft and four valves per cylinder
Fuel consumption Lubrication system
Prime Power, g/kWh (lb/hph) – Full flow oil cooler
TAD1341GE-B TAD1342GE-B TAD1343GE-B – Full flow disposable spin-on oil filters, for extra high filtration
1500 rpm 1800 rpm 1500 rpm 1800 rpm 1500 rpm 1800 rpm – The lubricating oil level can be measured during operation
– Gear type lubricating oil pump, gear driven by the transmission
25% 235 254 228 240 224 239
(0.381) (0.411) (0.369) (0.389) (0.363) (0.387)
Fuel system
50% 202 210 199 206 198 205
(0.327) (0.341) (0.322) (0.334) (0.320) (0.333) – Electronic high pressure unit injectors
– Fuel prefilter with water separator and water-in-fuel indicator / alarm
75% 194 201 193 200 193 200
(0.314) (0.327) (0.312) (0.325) (0.312) (0.325) – Gear driven low-pressure fuel pump
100% 192 201 192 204 192 205 – Fine fuel filter with manual feed pump and fuel pressure switch
(0.312) (0.326) (0.311) (0.331) (0.312) (0.332)
Cooling system
Standby Power, g/kWh (lb/hph) – Efficient cooling with accurate coolant control through a water distribu-
TAD1341GE-B TAD1342GE-B TAD1343GE-B tion duct in the cylinder block. Reliable sleeve thermostat with mini-
mum pressure drop.
1500 rpm 1800 rpm 1500 rpm 1800 rpm 1500 rpm 1800 rpm
– Belt driven coolant pump with high degree of efficiency
25% 228 245 222 233 219 232 – Electronically controlled viscous fan drive provides lower noise and fuel
(0.369) (0.396) (0.360) (0.378) (0.355) (0.376)
consumption (optional).
50% 199 207 196 203 196 202
(0.323) (0.335) (0.318) (0.329) (0.317) (0.328) Turbo charger
75% 193 201 193 202 193 202
– Efficient and reliable turbo charger
(0.314) (0.326) (0.312) (0.327) (0.313) (0.327) – Electronically controlled Waste-gate
– Extra oil filter for the turbo charger
100% 194 204 193 207 195 207
(0.314) (0.331) (0.313) (0.335) (0.316) (0.336)
Electrical system
– Engine Management System 2 (EMS 2.4), an electronically controlled
Dimensions processing system which optimizes engine performance. It also in-
Not for installation. Dimensions in mm. cludes advanced facilities for diagnostics and fault tracing.
– The instruments and controls connect to the engine via the CAN SAE
J1939 interface, either through the Control Interface Module (CIM) or
the Digital Control Unit (DCU). The CIM converts the digital CAN bus
signal to an anolog signal, making it possible to connect a variety of
1391 instruments. The DCU2 is a control panel with display, engine control,
monitoring, alarm, parameter setting and diagnostic functions. The
DCU2 also presents error codes in clear text.
– Sensors for oil pressure, oil temp, boost pressure, boost temp, coolant-
temp, fuel temp, water in fuel, fuel pressure and two speed sensors.

2206 1114

Rating guidelines Power standards

CONTINUOUS POWER is defined as being the The engine performance corresponds to ISO
maximum power which the generating set is capable 3046, BS 5514 and DIN 6271. The technical data
of delivering continuously while supplying a con- applies to an engine without cooling fan and op-
stant electrical load when operated for an unlimited
English 04-2021 © 2021 AB Volvo Penta.

erating on a fuel with calorific value of 42.7 MJ /

number of hours per year under the agreed operat- kg (18360 BTU/lb) and a density of 0.84 kg/liter
ing conditions with the maintenance intervals and
(7.01 lb/US gal), also where this involves a devia-
procedures being carried out as prescribed by the
tion from the standards. Power output guaranteed
manufacturer.
within 0 to +2% att rated ambient conditions at
PRIME POWER rating corresponds to ISO Standard delivery. Ratings are based on ISO 8528. Engine
Power for continuous operation. It is applicable for speed governing in accordance with ISO 8528-5
supplying electrical power at variable load for an un- G3.
limited number of hours instead of commercially pur-
chased power. A10 % overload capability for govering
Please contact your local Volvo Penta dealer for further information.
purpose is available for this rating. Please note that products illustrated may differ from production
STAND-BY POWER rating corresponds to ISO Stan- models. Not all models and accessories are available in all markets,
and standard equipment may vary between different markets. Every
dard Fuel Stop Power. It is applicable for
supplying stand-by electrical power at variable load AB Volvo Penta effort has been made to ensure that facts and figures are correct at
the time of publication. However, Volvo Penta reserves the right to
in areas with well established electrical networks in SE-405 08 Göteborg, Sweden make changes without prior notice at any time.
the event of normal utility power failure. No overload www.volvopenta.com
capability is available for this rating.