PA R I S H R A M

ENTERPRISES

PE ’s
SOLAR
WATER
HEATER

BUYING A • Up to 100% Running Cost Saving

PE’s SOLAR • Short Payback Time

WATER HEATER • Environment Friendly

MAKES SENSE • Easy Maintainance & Excellent Sales Service

Reliable and Economical Heating System

 PE’s Solar Water Heater

PE is our Brand in Solar Water Hea ng Systems. PE’s Solar Water Hea ng Systems are
suitable for varied projects right from bungalows, villas, apartments to large townships,
hotels, commercial buildings and industrial applica on.

We Have already installed over 4,00,000 LPD Resendi al and industrial systems with total
capacity of around 6,00,000 LPD across India.

Our vision is to become the na on leader in manufacturing highly qualita ve, innova ve
and cost effec ve solar water hea ng systems that will provide effec ve energy efficient
Non-pressure SS one pipe inlet-outlet ETC Type System

MATERIAL

1 . Vacuum tube:Cu/ss:ALN(H)/ss:ALN(L)/ss:ALN
2. Inner tank: SUS304 - 2B 0.5 mm/0.3mm
Vaccum tube 3. Outer tank: SUS304-BA.0.5 mm
4. Frame: SUS202.1 .2mm
5.The material of insula on: polyurethane

CHARACTERISTICS
This type uses the all-glass evacuated solar collector
three targeted tubes as the heat-absorbing element.
the high vacuum degree of the clearance between
the outer and inner tube reduces the heat emission
which is caused by convec on and conduc on. The
layer films (coa ng) of the all-glass evacuated three
targeted tubes transfer the sun energy into heat energy.
Depending on the different density between hot water
and cold water, a water flowing cycle is created in the
tube. Hot water flows automa cally upwards while
the cold water flows down. The water in the storage
tank will be heated because of this natural circula on.

5. Water connec ons (inch): 3/4

6. Collector angle (degree): 28
7. Volume from 100 LPD to 500 LPD
Non-pressure
one pipe inlet-outlet

MATERIAL

1. Vaccum tube:
Cu/ss:ALN(H)/ss:ALN(L)/ss:ALN
2. Inner tank: SUS304-2B.0.5 mm/0.3mm
3. Outer tank: drawbench silver steel, 0.5mm/
Ms Color coated 0.45 mm
4. Frame: coated galvanized steel - 1.5mm

Non-pressure
one pipe inlet-outlet

MATERIAL

1. Vaccum tube:
Cu/ss:ALN(H)/ss:ALN(L)/ss:ALN
2. Inner tank: GI 0.7mm/1/1.5
3. Outer tank: draw bench silver stell, 0.5 mm/
MS Color Coated 0.45mm
4. The material of insula on: polyurethane

5. Water connec ons(inch):3/4

6. Collector angle (degree):28
7. Volume from 100 LPD to 1000 LPD
Insulated water tank CHARACTERISTICS

Stainless steel insula on water tank is fit

for all kinds of hot water project the thickness
of insula on layer is 50mm, it has small heat
loss and sa sfying insula ng effect, the
connectors adopt high-frequency welding to
make sure the water tank won't rust and make
water leakage, the material of inner tank is
stainless steel SUS304 - 2B
INTEGRATED PRESSURIZED
FLAT PLATE SOLAR WATER HEATER

CHARACTERISTICS
1. It is completely made of copper good
performance under pressure, the black-
chrome-plated copper-strip and copper
-pipe is welded by ultrasonic welding
machine.

2. The black-chrome-plated coa ng has

excellent quality with high absorp on
efficiency and low emissivity.

3. The coa ng is resistant to high

temperatures: in general if empty, under
temperature of 220C, the performance
and quality of colletor will not be affected
materials and coa ngs can bear lience
weather and have a long life span.;
endothermic copper-strip with Nickel-
plated has excellent resistance to corrode,
which can be used more than 15 years.

MATERIAL

1. Inner tank: SUS304-2B,

2. Core:black chrome
3. Outer tank: Drawbench silver steel,
0.5mm/stainless steel, 0.5mm/ MS Powder Coated 0.45mm
4. Frame: aluminum, 2.5 mm/GI 1.0mm
SPLIT PRESSURIZED
ETC SOLAR WATER HEATER

CHARACTERISTICS
1 . Collector is separated with the storage
tank. The tank can be put anywhere of
the house.
2. The collector can be put on both lted
roof and flat roof.
3. Module design, arbitrary combina on,
harmony with the building perfectly.
4. Intelligent control and automa c opera on.
5. An -freeze: no water inside the three
targeted tubes when it works.
6. The system controller has the an -freezing
func on: the temperature circula on will
operate while it reac on will operate while it reaches
the fixed temperature.
7. Mul func on: bathing, washing domes c hea ng.
8. Workable at any me and enjoyable

MATERIAL

1 Vaccum tube: Cu/ss:ALN(H)/ss:ALN(L)/ss:ALN

2. Inner tank: SUS304-213-1 .2-2.0mm/GI-1 -1 .5mm
3. Outer tank: painted mild steel - 0.45mm
4. Frame: Galvanized steel 2.omm
LARGE - SCALE
SOLAR COLLECTOR

CHARACTERISTICS
1 . Applicable to supplying solar hot water for
villa swimming pool, house hea ng and
so on.
2. Intelligent control and automa c
opera on.
3. All-day/ me -lapse mode
4. The design was the integra on of versa le
architectonic.
5. Any type of assistant heater can be
combined.
Remark
1. Diameter of the tank (mm): 360/460/800 5. Water connec on (inch): 3/4
2. Thickness insulated (mm): 50 6. Ins l angel (degree): 28
3. Vent Connec on (Inch): 3/4 7. Test pressure (Pa): 1.0 MPa
4. Electric heater connec on (inch):1 1/4
Non Pressurised Evacuated Type Solar Water Heater Spec. Sheet

Model Capacity No. of Tube Full Volume Inner Tank Installation

in LPD Tubes Dimension Inner Tank Size Dimension Area
r = 180 mm,
PE SWH 100 100 lpd 10 100 Ltr. 28 sq.ft
h = 983 mm
r = 180 mm,
PE SWH 150 150 lpd 15 150 Ltr. h = 1475 mm 42 sq.ft

r = 180 mm,
PE SWH 200 200 lpd 20 58mm x 200 Ltr. h = 1966 mm 50 sq.ft
1800mm
r = 180 mm,
PE SWH 250 250 lpd 25 250 Ltr. h = 2474 mm 65 sq.ft

r = 180 mm,
PE SWH 300 300 lpd 30 300 Ltr. h = 3000 mm 90 sq.ft

58mm x 2100 r = 230 mm,

PE SWH 500 500 lpd 32 500 Ltr. 110 sq.ft
mm h = 3050 mm
All Above System are available
SS 304 Tanks of 0.5mm, 0.8mm, 1.5mm_ 3/5/7 Years Conditional Warranty
GI Tanks of 0.8mm, 1.5mmm, 2 mm Tanks_2/5/7 Years Conditional Warranty
MS With Epoxy Coated Tanks 1.5mm, 2mm, 2.5mm Tanks_ 5/7 Years Conditional Warranty
MS with PE's Special Anticorrosive Coating 1.5mm Tanks_12 Years Unconditional Warranty
Pressurised and Non Pressurised Flat Plate Collector Type
Solar Water Heater Spec. Sheet
Model Capacity in LPD No. of Dimension of Full Volume
Collectors Collectors Inner Tank Size

PE FPC SWH 125 125 lpd 1 125 Ltr.

PE FPC SWH 250 250 lpd 2 250 Ltr.

PE FPC SWH 350 350 lpd 3 350 Ltr.

BIS 2m x 1m
PE FPC SWH 500 500 lpd 4 500 Ltr.

PE FPC SWH 800 800 lpd 6 800 Ltr.

PE FPC SWH 1000 1000 lpd 8 1000 Ltr.

All Above System are available

SS 304 Tanks of 0.5mm, 0.8mm, 1.5mm_ 3/5/7 Years Conditional Warranty
GI Tanks of 0.8mm, 1.5mmm, 2 mm Tanks_2/5/7 Years Conditional Warranty
MS With Epoxy Coated Tanks 1.5mm, 2mm, 2.5mm Tanks_ 5/7 Years Conditional Warranty
MS with PE's Special Anticorrosive Coating 1.5mm Tanks_12 Years Unconditional Warranty
 Vaccuum tube 20GP/40GP/40HQ
Type Area(x2) Length Diameter Quan ty Volume Gross loading Quan ty
(mm) (mm) (mm) weight(kg) (sets)

Pe’s -04-12 1.55 1800 58 12 100 91.5 40/93/109

PE’s-04-18 2.31 1800 58 18 150 109 30/71/83
PE’s-04-24 3.09 1800 58 24 200 148 26/61/71
PE’s-04-30 3,86 1800 58 30 250 170 21/50/59
PE’s-04-36 4.63 1800 58 36 300 201 18/42/50
PE’s-04-60 7,71 1800 58 60 600 289.5 11/7/31

Remark
1. Diameter of the tank (mm): 360/460/800 5. Water connec ons(inch):3/4
2. Thickness, insulated (mm): 50 6. Install angle (degree): 28
3. Vent Connec on (inch): 3/4 7. Test pressure (pa):1.0 Mpa
4. Electric heater connec on: 11/4 8. Opera ng fluid pressure (pa): 0.4MPa
Residen al Project:

Capacity...18000lpd

Project completed in 4 weeks me..

Consulta on, Manufacturing, Supply, Installa on

Region: Kahne, Pune, Maharashtra, india

Feel free to contact us for any of your similar requirement.

Residen al Project

Capacity: 20000 lpd

Project Completed in 5 Weeks

Our task, 1. Site survey2. Design of system as per

space availability3. Installa on at site 4. 5 years
AMC.

Region, Himnjewadi, Pune, Maharashtra, India

Services We Offer:
Consulta on and Contrac ng of Hea ng, Cooling & Solar Solu on | Government Registered Electrical
Contractor | Industrial Suppliers | Consumer & Commercial Electronics Supplier | Manufacturers & Distributors
of Air Coolers | Customized Engineering Solu on Providers.

List of Our Solu ons and Services:

1. Hea ng Solu ons:

a. Efficient Hot Water System
i. Domes c Efficient Hot Water System (300-1000 lpd): 50-60oC
ii. Commercial Efficient Hot Water System (1000 lpd onwards): 50-60oC
iii. Industrial Efficient Hot Water System: 45oC – 75oC
b. Solar Water Heaters
i. Evacuated Tube Solar Water Heater (Non – Pressurized)
ii. Flat Plate Solar Water Heater
iii. Pressurized Solar Water Heater
c. Calorifiers
i. Electrical Calorifiers (110% Efficiency) 35oC-90oC (MS / SS)
ii. Calorifiers with Internal Coil Heat Exchanger (MS / SS)
iii. Calorifiers with Shell and Tube Heat Exchanger (MS / SS)
iv. Calorifiers with Brazed Plate Heat Exchanger (MS / SS / FRP)
v. Mariner Calorifiers (SS / FRP)
vi. Customized Calorifiers
d. Swimming Pool Temperature Control System:
i. Electrical Swimming Pool Calorifiers with External Titanium Heat Exchanger
ii. Efficient Swimming pool Hea ng System with Brazed PHE
e. Space Hea ng
f. Fluid Hea ng
g. Heat Exchange Solu ons
h. Customized Hea ng Solu ons
i. Maintenance and Service of all Above Products and Solu ons
2. Cooling Solu ons:
a. Chiller Units
b. Cooling Calorifiers with internal as well as External Heat Exchanger
c. Air Coolers
d. Air Condi oners
3. Solar Photo-Voltaic Solu on:
a. Solar PV Plant
i. On-Grid Solu on
ii. Off-Grid Solu on
b. Solar Street Light
c. Solar Water Pumps
d. Solar Air Condi oners
e. Solar Charging Sta on
f. Solar Portable PV System

We Also Design, Manufacture, Install Customized Engineering Solu on.

AUTHORISED PARTNER:

Head Office.
2, Chandradarshan Apts, Plot no. 7, Mahesh society,
Bibwewadi, Pune 411037, Maharashtra, India...

Workshop and Sales Office..

2, Dew Drop villa, SV Road, Bibwewadi, Pune
411037, Maharashtra, India..

[email protected]
www.parishramenterprises.com