Installing Microsoft BizTalk Accelerator for

SWIFT Message Pack 2019

Microsoft Corporation
Published: August 2019
Contents
Installing Microsoft BizTalk Accelerator for SWIFT Message Pack 2019......................................................3
Prerequisites................................................................................................................................................3
Installing Message Pack 2019......................................................................................................................4
Configuring Message Pack 2019..................................................................................................................4
Enabling SWIFT 2019 Service Release Validation.........................................................................................5
Deploying and Undeploying Assemblies and Policies..............................................................................5
Deploying FRR Schemas...........................................................................................................................6
Creating Custom FRR Schemas Project with FIN messages.....................................................................7
Update Schemas for any FRR Custom project from Message Pack 2018 to 2019....................................9
Update BizTalk FrrSchemas project from Message Pack 2018 to 2019....................................................9
Publishing and Unpublishing InfoPath Forms........................................................................................10
Disabling SRG 2019 Validation...............................................................................................................10
Updating Custom MRSR.............................................................................................................................11
Known Issues.............................................................................................................................................11
Uninstalling the Message Pack 2019..........................................................................................................12
Copyright...................................................................................................................................................12
Installing Microsoft BizTalk Accelerator for SWIFT Message
Pack 2019
In order to provide industry-standard compliance with the SWIFT 2019 Standards Release specification,
Microsoft® has released the following:
 SWIFT Message Pack 2019 for Microsoft BizTalk Accelerator for SWIFT (A4SWIFT) 2013
 SWIFT Message Pack 2019 for Microsoft BizTalk Accelerator for SWIFT (A4SWIFT) 2013 R2
 SWIFT Message Pack 2019 for Microsoft BizTalk Accelerator for SWIFT (A4SWIFT) 2016

Upgrading to a new release provides the compatibility required for ongoing use of the SWIFT standard
that is to be imposed starting in November 2019.
This document provides upgrade guidance to ensure minimum downtime. It also describes the feature
updates in the release so you can plan accordingly.
The A4SWIFT Message Pack 2019 contains the following:
 Complete re-packaging of all SWIFT FIN FF message types and business rules (not just net
change).
 Updates to schemas and business rules that are fully compliant with SWIFT 2019 certification
requirements.

Note

The Message Pack carries forward all hot-fixes related to schemas and business rules
that are not superseded by the 2019 requirements.

 The Microsoft BizTalk Accelerator for SWIFT Message Pack 2019 does not have any components
outside of schemas, business rules and Microsoft Office InfoPath® Forms.

Prerequisites
Ensure that the following prerequisites are installed prior to running setup:

 Common Language runtime (CLR) Version 4.0 or .Net Framework version 4.0 or higher.

 Microsoft Windows Server® 2008 R2, Microsoft Windows 8, Microsoft Windows Server® 2012,
Microsoft Windows 8.1, Microsoft Windows Server® 2012 R2 or Microsoft Windows Server®
2016
 The A4SWIFT Message Pack 2019 is available as one distinct downloadable package.

A4SWIFT Version and Service Pack

BizTalk Server Version
(if required)
BizTalk Server 2013 A4SWIFT 2013

BizTalk Server 2013 R2 A4SWIFT 2013 R2

BizTalk Server 2016 A4SWIFT 2016

Installing Message Pack 2019

To install Message Pack 2019

1. If any schemas and Business Rule Engine (BRE) rules are deployed from earlier version of
message pack, then run the BRE Deployment utility and point it to the schema assembly.
Undeploy all existing (e.g. SWIFT 2018 Message Pack) BRE policies by running the BRE
Deployment utility.

Note: Manually remove the A4SWIFT_Codelist and A4SWIFT_Functions vocabularies using the
Business Rule Composer tool.

2. Back up the A4SWIFT database or any other database that is used for SWIFT. Also back up your
SWIFT message schemas.
3. Unzip the MP_2019.exe package.
4. Run Setup.exe to install the Message Pack 2019.
5. On the Installation Completed page, click Finish.
Note

If Run Configuration Wizard is selected on the Installation Completed page (the

default), the Message Pack 2019 configuration wizard will run automatically when
you click Finish.

6. After the installation completes, continue to the following section, Configuring Message Pack
2019, to configure the Message Pack as it is mandatory for BRE Validations.

Configuring Message Pack 2019

To configure Message Pack 2019

1. On the Microsoft BizTalk Accelerator for SWIFT Message Pack 2019 Configuration page, click DB
Configuration in the left pane.
 2. In the DB Configuration pane, select Do you want to create a new database group to create the
groups shown in the Group pane. Clear Do you want to create a new database group to join an
existing database group.
3. Click Apply Configuration.
4. On the Summary page, verify the configuration settings, and then click Apply Configuration.
Note

You can save the configuration settings as an XML file if desired.

5. On the Configuration Wizard page that indicates that you have successfully completed the
Configuration Wizard, click Finish.

Note

Installing the SWIFT Message Pack 2019 will not automatically validate messages for
SWIFT 2019 Service Release compliance. Use the following procedure to enable SWIFT
2019 Service Release validation.

Enabling SWIFT 2019 Service Release Validation

Deploying and Undeploying Assemblies and Policies

To deploy and undeploy assemblies and policies

1. Undeploy all existing (e.g., SWIFT 2018 Message Pack) schema assemblies. In a multi-computer
environment, you must manually remove these schema assemblies from the GAC on all run-time
servers and the Business Activity Services (BAS)/ MRSR Site (A4Swift 2013 / A4Swift 2013 R2 /
A4Swift 2016)

2. Rebuild and deploy the schema assemblies with the schemas provided in the Message Pack under
<drive>:\Program Files\MP2019\SWIFT Messages\A4SWIFT-SRG2019.
(OR)
<drive>:\Program Files (x86)\MP2019\SWIFT Messages\A4SWIFT-SRG2019.

The rebuilt schema assemblies need to be installed in the global assembly cache (GAC) on all
computers that have the A4SWIFT run-time components installed.

Note

If any custom changes have been made to these schemas, the same changes must be
made to the Message Pack schemas after adding them to the schema projects.
 Note

The Message Pack does not support side-by-side deployment of SWIFT 2019 MessagePack
schema assemblies with SWIFT 2018 MessagePack schema assemblies.

Message instances that were originally parsed with SWIFT 2018 MessagePack schema
assemblies may be suspended. Suspended messages can then be resumed so that they
use SWIFT 2019 MessagePack schemas and validation policies.

3. Back up the BREDeployment utility configuration file BREDeployment.exe.config from the <drive>\
Program Files\Microsoft BizTalk Accelerator for SWIFT\SDK\Tools folder.

Open the configuration file in Notepad and modify the values of the following keys to point to the
appropriate directories in the SWIFT Message Pack 2019 installation directory. For example:

 <add key="BasePoliciesDirectory" value="%Program

Files%\MP2019\SWIFT Messages\A4SWIFT-SRG2019\Base Policies" />

 <add key="SchemasDirectory" value="%Program Files%\MP2019\SWIFT Messages\

A4SWIFT-SRG2019" />

 <add key="VocabularyDirectory" value="%Program Files%\MP2019\SWIFT Messages\

A4SWIFT-SRG2019\Base Policies\Vocabulary" />

 <add key="LogFileName" value="C:\Documents and Settings\All Users\Application Data\

BREDeploymentLog.txt" />

4. Go to <drive>:\Program Files\MP2019\SWIFT Messages\A4SWIFT-SRG2019\Base Policies.

Open the file DBConnection_Master_Policy.xml. Change the “DATABASE SERVER” and “DATABASE
NAME”. Ensure that “DATABASE NAME” is the same as you have entered when configuring the
Message Pack 2019.

5. Manually deploy policy DBConnection_Master_Policy.xml using the Business Rule Engine

Deployment Wizard. The file path to DBConnection_Master_Policy.xml is <drive>:\Program Files\
MP2019\SWIFT Messages\A4SWIFT-SRG2019\Base Policies\.

6. Run the BRE Deployment utility and point it to the schema assembly as in step 1.

7. Deploy the policies.

Note: Use “%ProgramFiles(x86)%” instead of %ProgramFiles% for (x64) bit OS.

Deploying FRR Schemas

Manually deploy %ProgramFiles%\MP2019\Assemblies\

Microsoft.Solutions.FinancialServices.SWIFT.FrrSchemas.dll by adding BizTalk assembly resource in
BizTalk Server Administration Console or execute following command in administrator mode
“<BizTalk Installation Folder>\BTSTask.exe” addresource -Type:System.BizTalk:BizTalkAssembly -Source:
“%ProgramFiles%\MP2019\Assemblies\Microsoft.Solutions.FinancialServices.SWIFT.FrrSchemas.dll” -
Overwrite

Note: Use “%ProgramFiles(x86)%” instead of %ProgramFiles% for (x64) bit OS.

Microsoft.Solutions.FinancialServices.SWIFT.FrrSchemas.dll contains FRR schemas compatible with both MQHA

and MQSA

Note

FRR Orchestration should be unenlisted Before deploying FRR schemas dll.

Creating Custom FRR Schemas Project with FIN messages

To create a custom project, use
FRR schemas from <drive>\Program Files (x86)\MP2019\SWIFT Messages\A4SWIFT-SRG2019\Category0
folder,
Base Schemas from <drive>\Program Files (x86)\MP2019\SWIFT Messages\A4SWIFT-SRG2019\Base
Schemas folder,
FIN messages from category folders <drive>\Program Files (x86)\MP2019\SWIFT Messages\A4SWIFT-
SRG2019\Categoryn where n represents Category 1 to 9.
For example to create a custom project with FIN message MT103.xsd and Base Schemas along with FRR
schema MTS21_FIN_ACK_NAK.xsd follow the below steps.
1. In Visual Studio, click File, point to New, and then click Project.
2. In the New Project dialog box, in the Project types pane, select the BizTalk Projects folder.

3. In the Templates pane, select Empty BizTalk Server Project.

4. In the Name box, type SWIFTSchemas as the project name.

5. Click OK to create the new project.

6. In Solution Explorer, right-click the SWIFTSchemas project, point to Add, and then click Existing
Item.

7. In the Add Existing Item-SWIFTSchemas dialog box, browse to <drive>:\Program Files (x86)\
MP2019\SWIFT Messages\A4SWIFT-SRG2019\Base Schemas**.
8. Select the SWIFT Base Types.xsd and the SWIFT Common Data Types.xsd schemas, and then
click Add.

Note

The SWIFT Base Types.xsd and the SWIFT Common Data Types.xsd schemas appear in
Solution Explorer under the SWIFTSchemas project.

9. In Solution Explorer, right-click the SWIFTSchemas project, point to Add, and then click Existing
Item.

10. In the Add Existing Item-SWIFTSchemas dialog box, browse to the <drive>:\Program Files (x86)\
MP2019\SWIFT Messages\A4SWIFT-SRG2019\Category 1\MT103** folder.

11. Select the MT103.xsd schema, and then click Add

Note

The new schema, MT103.xsd, appears in Solution Explorer under the SWIFTSchemas
project.

12. In the Add Existing Item-SWIFTSchemas dialog box, browse to the <drive>:\Program Files (x86)\
MP2019\SWIFT Messages\A4SWIFT-SRG2019\Category 0\MTS21_FIN_ACK_NAK** folder.

13. Select the MTS21_FIN_ACK_NAK.xsd schema, and then click Add

Note

The new schema, MTS21_FIN_ACK_NAK.xsd, appears in Solution Explorer under the

SWIFTSchemas project.

14. In Solution Explorer, ensure that the SWIFTSchemas project is expanded. Right-click References,
and then click Add Reference.

15. In the Add Reference dialog box, click the Browse tab.

16. Browse to <drive>:\Program Files (x86)\MP2019\Assemblies**.

17. Select the Microsoft.Solutions.FinancialServices.SWIFT.RuntimeSchemas.dll file.

18. Click Add, and then click OK.

Note

The RuntimeSchemas assembly (dll) that you selected now appears in the references
collection in the SWIFTPipelines project.

19. On the File menu, click Save All to save your changes.
20. Add the strong name key to the project.

21. In Solution Explorer, right-click SWIFTSchemas, and then click Build.

Note

Verify that Build Succeeded appears in the lower left-hand corner of the screen.

22. In Solution Explorer, right-click SWIFTSchemas, and then click Deploy

Note

Verify that Deploy Succeeded appears in the lower left-hand corner of the screen.

Update Schemas for any FRR Custom project from Message Pack
2018 to 2019

If a custom project is created using Message Pack 2018 with FRR schemas
From <drive>\Program Files (x86)\MP2018\SWIFT Messages\A4SWIFT-SRG2018\Category0**
and with Base Schemas from
<drive>\Program Files (x86)\MP2018\SWIFT Messages\A4SWIFT-SRG2018\Base Schemas**, folder

Remove the FRR Schemas and Base Schemas from the custom project.
Add FRR schemas from
<drive>\Program Files (x86)\MP2019\SWIFT Messages\A4SWIFT-SRG2019\Category0** folder and
Base Schemas from
<drive>\Program Files (x86)\MP2019\SWIFT Messages\A4SWIFT-SRG2019\Base Schemas** folder to the
custom project.

If there is a reference to Microsoft.Solutions.FinancialServices.SWIFT.RuntimeSchemas.dll from

MP2018 in the custom project, remove old dll reference from the custom project and also from <drive>\
labs\Projects\UserSolution\UserProject\bin\Debug** folder.

Add Microsoft.Solutions.FinancialServices.SWIFT.RuntimeSchemas.dll from

<drive>\Program Files (x86)\MP2019\Assemblies** folder to the References in the custom project.
Build the newly modified custom project. Undeploy the old custom project from BizTalk Admin Console
and deploy the newly created custom project. Restart the host instances to reflect the changes.

Update BizTalk FrrSchemas project from Message Pack 2018 to 2019

If FrrSchemas.btproj project is created from
<drive>\Program Files (x86)\MP2018\SDK\Source\FRRSchemas** folder,
Undeploy MP2018 FrrSchemas.btproj (Microsoft.Solutions.FinancialServices.FrrSchemas.dll pointing to
MP2018) from BizTalk Admin Console/Resources.

Use the FrrSchemas.btproj project from

<drive>\Program Files (x86)\MP2019\SDK\Source\FRRSchemas** folder.
Add the required FRR schemas from
<drive>\Program Files (x86)\MP2019\SWIFT Messages\A4SWIFT-SRG2019\Category0** folder and
Base Schemas from
<drive>\Program Files (x86)\MP2019\SWIFT Messages\A4SWIFT-SRG2019\Base Schemas** folder to the
FrrSchemas.btproj project at <drive>\Program Files (x86)\MP2019\SDK\Source\FRRSchemas** folder.

Remove the unwanted FRR schema references from the project if any.

Build the project and deploy it. Restart the host instances to reflect the changes.

Disabling SRG 2019 Validation

To disable SRG 2019 validation
1. Undeploy all SWIFT Message Pack 2019 BRE policies by running the BRE Deployment utility.
Manually remove the A4SWIFT_Codelist and A4SWIFT_Functions vocabulary using the Business
Rule Engine Composer tool.
2. Undeploy all existing SRG 2019 schema assemblies and remove them from the GAC on all
runtime servers and the BAS server/MRSR site server in your deployment environment.

Note

Before rebuilding and redeploying your schemas project, remove all Message Pack 2018
schemas and replace them with schemas from Message Pack 2019. Any custom changes
made to those schemas may not be preserved.
 3. Rebuild and deploy the schema assemblies with the schemas provided in the original SWIFT
Accelerator under one of the following locations:
 <installation drive>:\%Program Files%\Microsoft BizTalk Accelerator for SWIFT\SWIFT
Messages\A4SWIFT 2013
 <installation drive>:\%Program Files%\Microsoft BizTalk Accelerator for SWIFT\SWIFT
Messages\A4SWIFT 2013 R2
 <installation drive>:\%Program Files%\Microsoft BizTalk Accelerator for SWIFT\SWIFT
Messages\A4SWIFT 2016
 Rebuild and deploy schema assemblies to the GAC on all runtime servers and the BAS
server/MRSR site server in your deployment environment.
4. Go to the <installation drive>:\%Program Files%\Microsoft BizTalk Accelerator for SWIFT\SDK\
Tools folder and back up the existing BREDeployment.exe.config file.
Replace the BREDeployment utility configuration file that was backed up in step 3 of the
“Deploying and Undeploying Assemblies and Policies” section of this document, so that the keys
listed below now point to the appropriate directories in the A4SWIFT2013/ A4SWIFT2013R2/
/A4SWIFT2016 or the Message Pack 2019 installation directory. Here the path of the files would
be different based on the version of the Message Pack currently being rolled back to. For
example:
 <add key="BasePoliciesDirectory" value="%Program Files%\MP2019\SWIFT Messages\
A4SWIFT-SRG2019/Base Policies" />
 <add key="SchemasDirectory" value="%Program Files%\MP2019\SWIFT Messages\
A4SWIFT-SRG2019" />
 <add key="VocabularyDirectory" value="%Program Files%\ MP2019\SWIFT Messages\
A4SWIFT-SRG2019\Vocabulary" />
5. Run the BREDeployment utility and point it to the schema assembly deployed in step 3.
6. If you have published any InfoPath forms previously, you will have to unpublish them. At a
command prompt, navigate to the
<installation drive>:\%Program Files%\Microsoft BizTalk Accelerator for SWIFT\SDK\Tools folder.
7. Run FormPublish.exe –d. It will unpublish your previous forms.Rebuild and deploy any
projects or assemblies that you had previously used with A4SWIFT 2013 / A4SWIFT 2013
R2 / A4Swift 2016 or Message Pack 2019 as applicable.

Note: Use “%ProgramFiles(x86)%” instead of %ProgramFiles% for (x64) bit OS.

Updating Custom MRSR

If you are using custom MRSRs located in the <drive>:\%Program Files%\Microsoft BizTalk Accelerator
for SWIFT \SDK\Samples\CustomMRSRModel folder, you must update the tables in the custom MRSR
database to make the Message Pattern feature compatible with changes in the SWIFT 2019 Standards
Release Guide specifications.

To update the custom MRSR tables, run the UpdateDefaultDataSRG2006.sql script located in the
<drive>:\Program Files\MP2019\SDK\Samples\CustomMRSRModel\DB\SRG2006\ folder.

If you do not run the script, you will not be able to create patterns specific to the SRG 2019 update.
Patterns related to non-SRG2019 changes will continue to function.

Known Issues
1. Uninstalling the SWIFT Message Pack 2019 leaves behind the root folder.

Issue: When you uninstall the SWIFT Message Pack 2019, you might notice that the following
folder is not deleted: MP2019.

Resolution: You can safely delete this folder manually after uninstalling the Message Pack.

2. Failed upgrade

Issue: During Upgrade, upgrade will fail if a prerequisite is missing otherwise upgrade will be
successful but Upgrade will not show prerequisite missing dialog. Setup Log file will contain
particular prerequisite missing statement in case of prerequisite missing.

Resolution: Install prerequisite software mentioned in the Prerequisite section above.

3. Unconfiguring Message Pack deletes A4Swift Database.

Issue: If you don’t close Message Pack configuration wizard before unconfiguring Message Pack,
the A4Swift database gets deleted.

Resolution: After configuring Message Pack, close the configuration wizard and start the wizard
to unconfigure Message Pack.

4. Issue: Install of Message Pack may warn that it is unable to deploy the new runtime assembly.
This may occur when an older version of the Message Pack has been uninstalled without
unconfiguring it first.

Resolution: Unconfigure the older version of the Message Pack before uninstalling it.

Uninstalling the Message Pack 2019

1. Click Start, go to Control Panel, and then click Add or Remove Programs.
 2. In Add or Remove Programs, click Microsoft BizTalk Accelerator for SWIFT Message Pack 2019,
and then click Remove.

Copyright
Information in this document, including URL and other Internet Web site references, is subject to change
without notice. Unless otherwise noted, the companies, organizations, products, domain names, e-mail
addresses, logos, people, places, and events depicted in examples herein are fictitious. No association
with any real company, organization, product, domain name, e-mail address, logo, person, place, or
event is intended or should be inferred. Complying with all applicable copyright laws is the responsibility
of the user. Without limiting the rights under copyright, no part of this document may be reproduced,
stored in or introduced into a retrieval system, or transmitted in any form or by any means (electronic,
mechanical, photocopying, recording, or otherwise), or for any purpose, without the express written
permission of Microsoft Corporation.

Microsoft may have patents, patent applications, trademarks, copyrights, or other intellectual property
rights covering subject matter in this document. Except as expressly provided in any written license
agreement from Microsoft, the furnishing of this document does not give you any license to these
patents, trademarks, copyrights, or other intellectual property.

© 2019 Microsoft Corporation. All rights reserved.

Microsoft, BizTalk, InfoPath, Windows Server are trademarks of the Microsoft group of companies.

SWIFT, S.W.I.F.T., the SWIFT logo, Sibos, SWIFT Net, SWIFT Alliance, SWIFT Standards, SWIFT Ready and
Accord are trademarks of S.W.I.F.T. SCRL. Other SWIFT-derived product and service names, such as but
not limited to SWIFT Solutions and SWIFT Support, are trade names of S.W.I.F.T. SCRL.

All other trademarks are property of their respective owners.