c03918575

User Guide
© Copyright 2013 Hewlett-Packard Product notice Software terms

Development Company, L.P.
This guide describes features that are By installing, copying, downloading, or
Bluetooth is a trademark owned by its common to most models. Some features otherwise using any software product
proprietor and used by Hewlett-Packard may not be available on your computer. preinstalled on this computer, you agree to
Company under license. Microsoft and be bound by the terms of the HP End User
Windows are U.S. registered trademarks of License Agreement (EULA). If you do not
Microsoft Corporation. SD Logo is a accept these license terms, your sole
trademark of its proprietor. remedy is to return the entire unused
product (hardware and software) within 14
The information contained herein is subject days for a refund subject to the refund
to change without notice. The only policy of your place of purchase.
warranties for HP products and services are
set forth in the express warranty statements For any further information or to request a
accompanying such products and services. full refund of the computer, please contact
Nothing herein should be construed as your local point of sale (the seller).
constituting an additional warranty. HP shall
not be liable for technical or editorial errors
or omissions contained herein.
First Edition: July 2013
Document Part Number: 730501-001

Table of contents
1 Starting right ................................................................................................................................................... 1

Best practices ....................................................................................................................................... 1
Fun things to do .................................................................................................................................... 2
More HP resources .............................................................................................................................. 3
2 Getting to know your computer ..................................................................................................................... 5

Finding your hardware and software information ................................................................................. 5
Locating hardware ............................................................................................................... 5
Locating software ................................................................................................................. 5
Front ..................................................................................................................................................... 6
Right side ............................................................................................................................................. 7
Left side ................................................................................................................................................ 9
Top ..................................................................................................................................................... 11
Bottom ................................................................................................................................................ 12
Labels ................................................................................................................................................. 13
Identifying the labels .......................................................................................................... 13
3 Connecting to a network .............................................................................................................................. 14

Connecting to a wireless network ....................................................................................................... 14
Using the wireless controls ................................................................................................ 14
Using an Internet service provider ..................................................................................... 14
Setting up a WLAN ............................................................................................................ 15
Configuring a wireless router ............................................................................................. 15
Protecting your WLAN ....................................................................................................... 15
Connecting to a WLAN ...................................................................................................... 16
Connecting to a wired network ........................................................................................................... 17
Connecting to a local area network (LAN) ......................................................................... 17
4 Enjoying entertainment features ................................................................................................................. 18

Using the webcam .............................................................................................................................. 19
Using audio ........................................................................................................................................ 19
iii
Adjusting the volume ......................................................................................................... 19
Connecting speakers ......................................................................................................... 19
Connecting headphones .................................................................................................... 20
Using Beats Audio ............................................................................................................. 20
Accessing Beats Audio ..................................................................................... 20
Using video ......................................................................................................................................... 20
Connecting an HDMI device .............................................................................................. 20
Using HDMI audio .............................................................................................................. 21
Managing your audio and video files .................................................................................................. 21
Share media and data across your home group network (select models only) .................................. 22
Enable media sharing and set up a home group network ................................................. 22
Stream and share media between mobile devices ............................................................ 22
Migrate or synchronize data .............................................................................................. 23
Share photos, videos, and music to and from your phone ................................................ 23
Determining your Android phone operating system (OS) version ..................... 23
Download the sMedio TrueLink+ app to your phone ......................................... 23
Start sharing media ........................................................................................... 23
5 Navigating using the keyboard and pointing devices ............................................................................... 25

Using touch screen gestures .............................................................................................................. 26
One-finger slide ................................................................................................................. 26
Tapping .............................................................................................................................. 26
Scrolling ............................................................................................................................. 27
Pinching/stretching ............................................................................................................ 27
Rotating (select models only) ............................................................................................ 28
Edge swipes ...................................................................................................................... 29
Right-edge swipe .............................................................................................. 29
Left-edge swipe ................................................................................................. 29
Top-edge swipe and bottom-edge swipe .......................................................... 30
Using the keyboard ............................................................................................................................ 31
Using the action keys ......................................................................................................... 32
Using Microsoft Windows 8 shortcut keys ......................................................................... 33
Using the integrated numeric keypad ................................................................................ 33
6 Managing power ............................................................................................................................................ 35

Initiating Sleep and Hibernation ......................................................................................................... 35
Manually initiating and exiting Sleep .................................................................................. 35
Manually initiating and exiting Hibernation ........................................................................ 36
Setting password protection on wakeup ............................................................................ 36
Shutting down (turning off) the computer ........................................................................................... 36
iv
7 Managing and sharing information ............................................................................................................. 38
Using a USB device ........................................................................................................................... 38
Connecting a USB device .................................................................................................. 39
Removing a USB device .................................................................................................... 39
Inserting and removing a memory card .............................................................................................. 40
8 Maintaining peak performance .................................................................................................................... 41

Performing routine maintenance ........................................................................................................ 41
Using Disk Cleanup ........................................................................................................... 41
Using Disk Defragmenter ................................................................................................... 41
Updating programs and drivers ......................................................................................... 41
Cleaning your computer ..................................................................................................... 43
Cleaning procedures ......................................................................................... 43
Cleaning the display (All-in-Ones or Notebooks) .............................. 43
Cleaning the sides or cover .............................................................. 43
Cleaning the keyboard or mouse ...................................................... 44
Using security measures .................................................................................................................... 45
Setting Windows passwords .............................................................................................. 45
Setting Computer Setup (BIOS) passwords ...................................................................... 46
Using Internet security software ........................................................................................ 46
Installing software updates ................................................................................................ 47
Installing Windows updates ............................................................................... 47
Updating software ............................................................................................. 47
9 Using Computer Setup (BIOS) and HP PC Hardware Diagnostics (UEFI) ............................................... 48

Starting Computer Setup (BIOS) ........................................................................................................ 48
Updating the BIOS ............................................................................................................................. 48
Determining the BIOS version ........................................................................................... 48
Downloading a BIOS update ............................................................................................. 49
Using HP PC Hardware Diagnostics (UEFI) ...................................................................................... 50
Downloading HP PC Hardware Diagnostics (UEFI) to a USB device ............................... 50
10 Backing up, restoring, and recovering ..................................................................................................... 51

Creating recovery media and backups ............................................................................................... 52
Creating HP Recovery media ............................................................................................ 52
Restore and recovery ......................................................................................................................... 54
Using Windows Refresh for quick and easy recovery ....................................................... 55
Remove everything and reinstall Windows ........................................................................ 55
Recovering using HP Recovery Manager .......................................................................... 56
What you need to know ..................................................................................... 56
v
Using the HP Recovery partition (select models only) ...................................... 57
Using HP Recovery media to recover ............................................................... 57
Changing the computer boot order ................................................................... 57
Removing the HP Recovery partition ................................................................................. 58
11 Troubleshooting .......................................................................................................................................... 59
Wireless connection problems ........................................................................................................... 59
Cannot connect to a WLAN ............................................................................................... 59
Cannot connect to a preferred network ............................................................................. 59
Current network security codes are unavailable ................................................................ 60
Cannot connect to the wireless router ............................................................................... 60
Network status icon is not displayed .................................................................................. 61
Power problems ................................................................................................................................. 62
Computer will not turn on or start ....................................................................................... 62
Hard drive error .................................................................................................................. 62
Computer is not responding ............................................................................................... 62
Computer shuts down unexpectedly .................................................................................. 62
Computer Setup problems ................................................................................................................. 63
The computer will not enter Computer Setup .................................................................... 63
Display problems ................................................................................................................................ 64
The display is blank ........................................................................................................... 64
Images on the screen are too large or too small, or the images are fuzzy ........................ 64
Keyboard and mouse problems ......................................................................................................... 65
Audio problems .................................................................................................................................. 67
No sound is produced ........................................................................................................ 67
Software problems ............................................................................................................................. 68
12 Specifications .............................................................................................................................................. 69
Operating specifications ..................................................................................................................... 69
13 Electrostatic Discharge .............................................................................................................................. 70
Index ................................................................................................................................................................... 71
vi
1 Starting right
This computer is a powerful tool designed to enhance your work and entertainment. To get the most
out of your computer, read this chapter to learn about best practices after setup, fun things to do with
your computer, and where to get more HP resources.
Best practices
After you set up and register the computer, we recommend the following steps:
● If you haven’t already done so, connect to a wired or wireless network. See details in Connecting
to a network on page 14.
● Become familiar with the computer hardware and software. For information, go to Getting to
know your computer on page 5 and Enjoying entertainment features on page 18.
● Back up your hard drive by creating a recovery drive. See Backing up, restoring, and recovering
on page 51.
Best practices 1
Fun things to do
● You know that you can watch a YouTube video on the computer. But did you know that you can
also connect your computer to a digital set-top box or gaming console? For more information,
see Connecting an HDMI device on page 20.
● You know you can listen to music on the computer. But did you know that you can also stream
live radio to the computer and listen to music or talk radio from all over the world? See Using
audio on page 19.
● Experience music the way the artist intended, with deep controlled bass and clear, pure sound.
See Using Beats Audio on page 20.
● Use the new Windows 8 touch gestures for smooth control of images and pages of text. See
Using touch screen gestures on page 26.
2 Chapter 1 Starting right

More HP resources
You have already used Setup Instructions to turn on the computer and locate this guide. To locate
resources that provide product details, how-to information, and more, use this table.
Resource Contents
Setup Instructions ● Overview of computer setup and features.
Windows 8 Basics guide ● Overview of using Windows® 8.
Help and Support ● A broad range of how-to information and troubleshooting tips.
From the Start screen, type h, and then select Help

and Support. For U.S. support, go to
http://www.hp.com/go/contactHP. For worldwide
support, go to http://welcome.hp.com/country/us/en/
wwcontact_us.html.
Instructional videos ● How-to videos about using the features of your computer.
Go to http://www.hp.com/supportvideos (English only)
Upgrading and Servicing Guide ● Instructions for upgrading or replacing components of your
computer.
For U.S. support, go to http://www.hp.com/go/
contactHP. For worldwide support, go to
http://welcome.hp.com/country/us/en/
wwcontact_us.html.
Troubleshooting ● Solutions to the following problems:
See Troubleshooting on page 59 in this guide for ◦ Wireless connection problems

more information.
◦ Power problems
◦ Display problems
◦ Keyboard and mouse problems
◦ Audio problems
◦ Software problems
Safety & Comfort Guide ● Proper workstation setup.
To access this guide, select HP Support Assistant on ● Guidelines for posture and work habits that increase your
the Start screen, select My computer, and then select comfort and decrease your risk of injury.
User guides, or go to http://www.hp.com/ergo.
● Electrical and mechanical safety information.
Worldwide support web page ● Access to the following support options:
To get support in your language, go to ◦ Online chat with an HP technician.

http://welcome.hp.com/country/us/en/
wwcontact_us.html. ◦ Email support.
◦ Support telephone numbers.
◦ HP service center locations.
Regulatory, Safety and Environmental Notices ● Important regulatory notices.
To access this guide, select the HP Support

Assistant app on the Start screen, select My
computer, and then select User guides.
More HP resources 3
Resource Contents
Limited Warranty* ● Specific warranty information about this computer.
To access this guide, select the HP Support

Assistant app on the Start screen, select My
computer, and then select Warranty and services,
or go to http://www.hp.com/go/orderdocuments.
*You can find the expressly provided HP Limited Warranty applicable to your product located with the user guides on your
computer and/or on the CD/DVD provided in the box. In some countries/regions, HP may provide a printed HP Limited
Warranty in the box. For countries/regions where the warranty is not provided in printed format, you may request a printed
copy from http://www.hp.com/go/orderdocuments or write to:
● North America: Hewlett-Packard, MS POD, 11311 Chinden Blvd., Boise, ID 83714, USA
● Europe, Middle East, Africa: Hewlett-Packard, POD, Via G. Di Vittorio, 9, 20063, Cernusco s/Naviglio (MI), Italy
● Asia Pacific: Hewlett-Packard, POD, P.O. Box 200, Alexandra Post Office, Singapore 911507
When you request a printed copy of your warranty, please include your product number, warranty period (found on your
service label), name, and postal address.
IMPORTANT: Do NOT return your HP product to the addresses above. For U.S. support, go to http://www.hp.com/go/
contactHP. For worldwide support, go to http://welcome.hp.com/country/us/en/wwcontact_us.html.
4 Chapter 1 Starting right

2 Getting to know your computer
Finding your hardware and software information

Locating hardware
To find out what hardware is installed on your computer:
1. From the Start screen, type c, and then select Control Panel.
2. Select System and Security, and then in the System area, click Device Manager.
A list displays all the devices installed on your computer.
Locating software
To find out what software is installed on your computer:
1. From the Start screen, right-click using the external wireless mouse.
– or –
Swipe down from the top edge of the computer screen.
2. Select the All apps icon.
Finding your hardware and software information 5

Front
Component Description
(1) WLAN antennas (2)* Send and receive wireless signals.
(2) Internal microphones (2) Record audio, automatically filtering out the noise around you.
(3) Webcam light On: The webcam is on.
(4) Webcam Records video and takes still photographs.
To use the webcam, from the Start screen, type c, and then select Camera.
(5) Speakers (2) Produce sound.
*The antennas are not visible from the outside of the computer. For optimal transmission, keep the areas immediately
around the antennas free from obstructions. For wireless regulatory notices, see the section of the Regulatory, Safety, and
Environmental Notices that applies to your country or region. These notices are located in Help and Support.
6 Chapter 2 Getting to know your computer

Right side
(1) USB 3.0 port Connects an optional USB 1.0, USB 2.0, or USB 3.0 device and
provides enhanced USB power performance for USB 3.0 devices.
(2) USB 3.0 charging (powered) port Connects an optional USB 1.0, USB 2.0, or USB 3.0 device. USB
charging ports allow you to charge connected USB devices.
Standard USB ports will not charge all USB devices or will charge
using a low current. Some USB devices require power and require
you to use a powered port.
NOTE: USB charging ports can also charge select models of

cell phones and MP3 players, even when the computer is off.
Right side 7
(3) Subwoofer connector Connects HP Pulse Subwoofer (purchased separately). The

subwoofer provides superior bass sound.
(4) USB 2.0 ports (2) Connect optional USB devices.
(5) RJ-45 (network) jack Connects a network cable.
(6) Hard drive light Blinking: The hard drive is being used.

Left side
(1) HDMI-in port Connects an optional video or audio device, such as a gaming
console or digital set-top box.
Left side 9
(2) Audio-out (headphone) jack/ Audio- Connects optional powered stereo speakers, headphones,
in (microphone) jack earbuds, or a headset. Also connects an optional headset
microphone. This jack does not support optional microphone-
only devices.
WARNING! To reduce the risk of personal injury, adjust the

volume before putting on headphones, earbuds, or a headset.
For additional safety information, see the Regulatory, Safety,
and Environmental Notices.
NOTE: When a device is connected to the jack, the

computer speakers are disabled.
(3) Security cable slot Attaches an optional security cable to the computer.
NOTE: The security cable may not prevent the computer

from being mishandled or stolen.
(4) AC adapter light ● On: The AC adapter is connected and the battery is
charged.
● Off: The computer is using battery power.
(5) Power connector Connects an AC adapter.

Top
(1) Near Field Communication (NFC) antenna Sends and receives wireless signals to share media from
(select models only) your phone to your computer.
For more information, see Start sharing media on page 23.
(2) Power button ● When the computer is off, press the button to turn on
the computer.
● When the computer is in the Sleep state, press the

button briefly to exit Sleep.
● When the computer is in Hibernation, press the button

briefly to exit Hibernation.
CAUTION: Pressing and holding down the power button

will result in the loss of unsaved information.
If the computer has stopped responding and Microsoft®

Windows® shutdown procedures are ineffective, press and
hold the power button down for at least 5 seconds to turn off
the computer.
To learn more about your power settings, from the Start

screen, type p. In the search box, type power, select
Settings, and then select Power options.
Top 11
Bottom
(1) HDMI-in button Switches the computer screen to the HDMI device.
NOTE: The HDMI cable must be connected to the computer.
(2) Memory card reader Reads data from and writes data to memory cards such as Secure Digital
(SD) memory cards.

Labels
Identifying the labels
The labels affixed to the computer provide information you may need when you troubleshoot system
problems or travel internationally with the computer. The labels are located on the bottom of the
computer stand.
● Service label—Provides important information to identify your computer. When contacting

support, you will probably be asked for the serial number, and possibly for the product number or
the model number. Locate these numbers before you contact support.
● Regulatory label(s)—Provide(s) regulatory information about the computer.
● Wireless certification label(s)—Provide(s) information about optional wireless devices and the
approval markings for the countries or regions in which the devices have been approved for use.
Labels 13
3 Connecting to a network
You can explore the globe and access information from millions of websites using your computer and
a wired or wireless network connection. This chapter will help you get connected to that world.
Connecting to a wireless network

Wireless technology transfers information across radio waves instead of wires. Your computer may
be equipped with one or more of the following wireless devices:
● Wireless local area network (WLAN) device—Connects the computer to wireless local area
networks. In a WLAN, the mobile wireless device in your computer communicates with a
wireless router or a wireless access point.
● Bluetooth® device—Creates a personal area network (PAN) to connect to other Bluetooth-

enabled devices such as computers, phones, printers, headsets, speakers, and cameras. In a
PAN, each device communicates directly with other devices, and devices must be relatively
close together.
For more information about wireless technology, see the information and website links provided in
Help and Support. From the Start screen, type h, and then select Help and Support.
Using the wireless controls

The Network and Sharing Center allows you to set up a connection or network, connect to a network,
and diagnose and repair network problems.
To use the Network and Sharing Center:
2. Select Network and Internet, and the select Network and Sharing Center.
For more information, go to Help and Support. From the Start screen, type h, and then select Help
and Support.
Using an Internet service provider

When you are setting up Internet access in your home, you must establish an account with an
Internet service provider (ISP). To purchase Internet service and a modem, contact a local ISP. The
ISP will help set up the modem, install a network cable to connect your wireless router to the modem,
and test the Internet service.
NOTE: Your ISP will give you a user ID and a password to use for Internet access. Record this
information and store it in a safe place.
14 Chapter 3 Connecting to a network

Setting up a WLAN
To set up a WLAN and connect to the Internet, you need the following equipment:
● A broadband modem (either DSL or cable) (1) and high-speed Internet service purchased from
an Internet service provider
● A wireless router (2) (purchased separately)
NOTE: Some modems have a built-in wireless router. Check with your ISP to determine what
type of modem you have.
● A wireless computer (3)
The illustration below shows an example of a wireless network installation that is connected to the
Internet.
Additional wireless and wired computers can be connected to increase the size of your home
network.
For help in setting up your WLAN, see the information provided by your router manufacturer or your
ISP.
Configuring a wireless router

For help configuring a wireless router, see the information provided by your router manufacturer or
your ISP.
NOTE: It is recommended that you initially connect your new wireless computer to the router by
using the network cable provided with the router. When the computer successfully connects to the
Internet, disconnect the cable, and access the Internet through your wireless network.
Protecting your WLAN

When you set up a WLAN or connect to an existing WLAN, always enable security features to protect
your network from unauthorized access.
Connecting to a wireless network 15

Wireless radio signals travel outside the network, so other WLAN devices can pick up unprotected
signals. Take the following precautions to protect your WLAN:
● Use a firewall.
A firewall checks information and requests that are sent to your network. It then discards any
suspicious items. Firewalls are available in both software and hardware. Some networks use a
combination of both types.
● Use wireless encryption.
Wireless encryption uses security settings to encrypt and decrypt information that is transmitted
over the network. For more information, go to Help and Support. From the Start screen, type h,
and then select Help and Support.
Connecting to a WLAN
To connect to a WLAN, follow these steps:
1. Be sure that the WLAN device in your computer is on.
2. From the Start screen, point to the far-right upper or lower corner of the screen to display the
charms.
3. Select Settings, and then click the network status icon.
4. Select a WLAN from the list.
5. Click Connect.
If the WLAN is a security-enabled WLAN, you are prompted to enter a security code. Type the
code, and then click OK to complete the connection.
NOTE: If no WLANs are listed, you may be out of range of a wireless router or access point.
NOTE: If you do not see the WLAN you want to connect to, from the Windows desktop, right-
click the network status icon, and then select Open Network and Sharing Center. Click Set up
a new connection or network. A list of options is displayed, allowing you to manually search
for and connect to a network or to create a new network connection.
After the connection is made, place the pointer over the network status icon in the notification area, at
the far right of the taskbar, to verify the name and status of the connection.
NOTE: The functional range (how far the wireless signals travel) depends on WLAN
implementation, router manufacturer, and interference from other electronic devices or structural
barriers such as walls and floors.
16 Chapter 3 Connecting to a network

Connecting to a wired network
WARNING! To reduce the risk of electric shock, fire, or damage to the equipment, do not plug a
modem cable or telephone cable into an RJ-45 (network) jack.
Connecting to a local area network (LAN)

Use a LAN connection if you want to connect the computer directly to a router in your home (instead
of working wirelessly), or if you want to connect to an existing network at your office.
Connecting to a LAN requires an 8-pin, RJ-45 (network) cable.
To connect the network cable, follow these steps:
1. Plug the network cable into the network jack (1) on the computer.
2. Plug the other end of the network cable into a network wall jack (2) or router.
NOTE: If the network cable contains noise suppression circuitry (3), which prevents
interference from TV and radio reception, orient the circuitry end of the cable toward the
computer.
Connecting to a wired network 17

4 Enjoying entertainment features
Use your HP computer as an entertainment hub to socialize via the webcam, enjoy and manage your
music, and download and watch movies. Or, to make your computer an even more powerful
entertainment center, connect external devices like speakers, headphones, or a gaming console.
18 Chapter 4 Enjoying entertainment features

Using the webcam
Your computer has an integrated webcam, a powerful social networking tool that allows you to
communicate up close with friends and colleagues whether they are next door or on the other side of
the world. With the webcam, you can stream video with your instant messaging software, capture and
share video, and take photos.
▲ To start the webcam, from the Start screen, type c, and then select Camera.
For details about using the webcam, go to Help and Support. From the Start screen, type h, and then
select Help and Support.
Using audio
On your HP computer, you can play music CDs, download and listen to music, stream audio content
from the web (including radio), record audio, or mix audio and video to create multimedia. To
enhance your listening enjoyment, attach external speakers or headphones.
Adjusting the volume

1. From the Start screen, point to the far-right upper or lower corner of the screen to display the
charms.
2. Select Settings, and then click the speaker icon.
3. Adjust the slider to increase or decrease the volume.
NOTE: You can also adjust the volume using the volume keys on the external wireless keyboard.
See Using the action keys on page 32 for more information.
Connecting speakers
You can attach wired speakers to your computer by connecting them to a USB port on your
computer.
To connect wireless speakers to your computer, follow the device manufacturer's instructions. Before
connecting speakers, lower the volume setting.
Using the webcam 19

Connecting headphones
You can connect wired headphones to the audio-out (headphone) jack/audio-in (microphone) jack on
your computer.
To connect wireless headphones to your computer, follow the device manufacturer's instructions.
WARNING! To reduce the risk of personal injury, adjust the volume before putting on headphones,
earbuds, or a headset. For additional safety information, see the Regulatory, Safety and
Environmental Notices.
Using Beats Audio

You can experience Beats Audio through the computer's internal speakers or through Beats Audio
headphones connected to the audio-out (headphone) jack/audio-in (microphone) jack.
Accessing Beats Audio

Use Beats Audio Control Panel to view and manually control audio and bass settings.
▲ To open Beats Audio Control Panel, from Start screen, type c, select Control Panel, select
Hardware and Sound, and then select Beats Audio Control Panel.
Using video
Your HP computer is a powerful video device that enables you to watch streaming video from your
favorite websites and download video and movies to watch on your computer without needing to
connect to a network.
Connecting an HDMI device

NOTE: To connect an HDMI device to your computer, you need an HDMI cable, sold separately.

You can connect high-definition devices to your computer, such as a gaming console or digital set-top
box.
1. Connect one end of the HDMI cable to the HDMI-in port on the computer.
2. Connect the other end of the cable to the device.
3. If the computer screen does not automatically switch, press the HDMI-in button to alternate the
computer screen to the HDMI device.
4. To make your selections, use the enter, back space, up arrow, or down arrow keys.
Using HDMI audio

HDMI is the only video interface that supports high-definition video and audio. HDMI controls are only
intended to control the settings of the device plugged into that port, and do not control any other
media devices on the system. When a device is plugged into the HDMI port, the volume on the
computer is muted.
Managing your audio and video files

CyberLink MediaSuite helps you manage and edit your photo and video collections.
▲ To open CyberLink MediaSuite, from the Start screen, type c, and then select CyberLink
MediaSuite.
For more information about using CyberLink MediaSuite, see the software Help.
Managing your audio and video files 21

Share media and data across your home group network
(select models only)
Your computer has advanced features that allow you to connect your mobile devices and exchange
photos, files, data, music, or videos. Using Near Field Communication (NFC) hardware and sMedio
360 software on your home group network, you can tap your NFC-enabled Android smart phone to
your computer and wirelessly share information between your two devices.
IMPORTANT: sMedio works in both Windows 8 and Windows 7 operating systems. You can use
sMedio on your computer as well as on other devices, as long as they are on the same home group
network.
sMedio empowers you to:
● Stream and share media between mobile devices wirelessly with sMedio.
● Migrate and synchronize data between two computers on a wired or wireless home group
network with sMedio TrueSync.
● Tap your phone to your computer to share photos, videos, and music to and from your phone
and your computer with sMedio TrueLink+.
NOTE: To explore all of the available features of sMedio, go to the Windows desktop and click the
sMedio TrueSync icon in the taskbar. Click Learn More on the Sign-in/Create Account screen.
Enable media sharing and set up a home group network

Before you can begin using sMedio software, you need to be sure that all of your computers and
mobile devices are on the same home group network and media sharing is enabled.
1. Enable media sharing:
a. From the Start screen, point to the upper-right or lower-right corner of the display to reveal
the charms.
b. Select Settings, and then click the network status icon.
c. Right-click the network you are connected to, and then select the check box to turn on
sharing.
2. From the Start screen, click sMedio, and then click Tutorial for information on how to set up a
home group network
Stream and share media between mobile devices

To wirelessly stream and share media from one device to another, your computers and mobile
devices must be on the same home group network and media sharing must be enabled on all
devices. See Enable media sharing and set up a home group network on page 22 for more
information.
▲ To wirelessly share media between devices, from the Start screen, select the sMedio 360.
– or –
From the Start screen, type s, and then select sMedio 360 from the list of applications.

Migrate or synchronize data
With sMedio TrueSync, you can synchronize and access your files across multiple computers that are
on the same home group network. You can also migrate files from one computer to another. For
information on setting up a home group network, see Enable media sharing and set up a home group
network on page 22.
1. From the Windows desktop, click the sMedio TrueSync icon on the taskbar.
2. Follow the on-screen instructions to set up your folders that will be used for migrating and
synchronizing information.
TIP: You will also be guided through the process of setting up additional computers to create the
synchronization relationship.
Share photos, videos, and music to and from your phone

sMedio TrueLink+ allows you to play back, stream, and share photos, videos, and music to and from
your computer and NFC-enabled Android smart phone. Your computer and phone must be on the
same home group network. For information on setting up a home group network, see Enable media
sharing and set up a home group network on page 22.
TIP: For help in connecting the phone to your home group network, see the phone manufacturer's
instructions.
Before you can begin sharing media, you must do the following:
1. Determine your Android phone operating system version.
2. Download the free app on your phone.
3. Share media between your devices.
Determining your Android phone operating system (OS) version

Your phone must have the Android 4.0 or higher operating system. Refer to the phone's
manufacturer's instructions for NFC-enable capabilities.
To determine the operating system version:
1. On your phone, go to the Settings screen, and then tap About Phone.
2. Tap Android version.
Download the sMedio TrueLink+ app to your phone

Download the sMedio TrueLink+ app to your phone to wirelessly touch-to-share photos, videos, and
music from your NFC-enabled Android smart phone and your computer. This free app is located in
the Google Play app store.
▲ Click the Tutorial icon on the sMedio main screen for instructions on downloading and using this
app.
Start sharing media

Tap your phone to your computer to start sharing media.
Share media and data across your home group network (select models only) 23
NOTE: In order to share media from your phone to your computer, the media must be in a format
that is compatible with other network devices.
1. On your phone, open the sMedio 360 TrueLink+ app, tap My Devices, and then tap My
Mobile.
2. Swipe left or right to find your music, videos, or photos.
3. Open the item you want to share.
4. Tap any part of your phone on the NFC label on the top of your computer.
5. A message, Touch to Beam, appears on the phone screen. Press and hold the item you are
sharing for a few seconds.
6. In a few seconds, you are prompted on your computer to stream, copy, or cancel the file.
Depending on your choice, the file will begin moving to the correct folder on your computer.

5 Navigating using the keyboard and
pointing devices
Your computer includes an external wireless keyboard and an external wireless mouse for easy
navigation. After you remove the battery tabs from the accessories, they will automatically pair with
the computer.
NOTE: The wireless receiver is preinstalled in the dedicated USB port on the bottom of the
computer stand. If you have any problems with the wireless accessories, remove the receiver from
the USB port and then reconnect it. For additional information, see Keyboard and mouse problems
on page 65.
25
Using touch screen gestures
A touch screen computer allows you to control items on the screen directly with your fingers.
TIP: On touch screen computers, you can perform the gestures on the screen or using the keyboard
and mouse.
One-finger slide
The one-finger slide is mostly used to pan or scroll through lists and pages, but you can use it for
other interactions, too, such as moving an object.
● To scroll across the screen, lightly slide one finger across the screen in the direction you want to
move.
NOTE: When many apps are revealed on the Start screen, you can slide your finger to move
the screen left or right.
● To drag, press and hold an object, and then drag the object to move it.
Tapping
To make an on-screen selection, use the tap function.
● Use one finger to tap an object on the screen to make a selection. Double-tap an item to open it.
26 Chapter 5 Navigating using the keyboard and pointing devices

Scrolling
Scrolling is useful for moving the pointer up, down, left, or right on a page or image.
● Place two fingers on the screen and then drag them in an up, down, left, or right motion.
Pinching/stretching
Pinching and stretching allows you to zoom out or in on images or text.
● Zoom in by placing two fingers together on the display and then move your fingers apart.
● Zoom out by placing two fingers apart on the display and then move your fingers together.
Using touch screen gestures 27

Rotating (select models only)
Rotating allows you to turn items such as photos.
● Anchor the forefinger of your left hand on the object you want to rotate. Using your right hand,
slide your forefinger around in a sweeping motion from 12 o’clock to 3 o’clock. To reverse the
rotation, move your forefinger from 3 o’clock to 12 o’clock.
NOTE: Rotate is intended for specific apps where you can manipulate an object or image. Rotate
may not be functional for all apps.

Edge swipes
With edge swipes you can perform tasks such as changing settings and finding or using apps.
Right-edge swipe
The right-edge swipe reveals the charms, which let you search, share, start apps, access devices, or
change settings.
● Gently swipe your finger inward from the right edge of the display onto the screen to reveal the
charms.
Left-edge swipe
The left-edge swipe reveals your open apps so that you can switch to them quickly.
● Gently swipe your finger inward from the left edge of the display to switch between apps.
Without lifting your finger, swipe back toward the left edge to reveal all open apps.
Using touch screen gestures 29

Top-edge swipe and bottom-edge swipe
The top-edge swipe or bottom-edge swipe allows you to open a list of apps available on your
computer.
1. From the Windows Start screen, gently swipe your finger from the top edge or the bottom edge
of the display onto the screen.
2. Tap All apps to view available apps.

Using the keyboard
With the keyboard, you can type to select items and perform the same functions as you do by using
touch gestures. The keyboard also allows you to use action keys to perform specific functions.
TIP: The Windows logo key on the keyboard allows you to quickly return to the computer Start
screen from an open app or the Windows desktop. Pressing the Windows logo key again will return
you to the previous screen.
NOTE: Depending on the country or region, your keyboard may have different keys and keyboard
functions than those discussed in this section.
(1) fn key Executes frequently used system functions when pressed in combination with
an action key.
(2) Windows logo key Returns you to the Start screen from an open app or the Windows desktop.
Pressing the key again returns you to the previous screen.
(3) Action keys Perform common tasks.
(4) Windows application key Displays options for a selected object.
(5) Volume keys Mute or restore speaker sound, and decrease or increase speaker volume
incrementally as long as you hold down the key.
(6) Integrated numeric Set at the factory to function like an external numeric keypad. To alternate
keypad between this numeric function and the navigational function (indicated by the
directional arrows on the keys), press the num lock key.
(7) Sleep key Initiates Sleep, which saves your information in the system. The display and
other system components turn off and power is conserved.
To exit Sleep, briefly press the power button.
CAUTION: To reduce the risk of information loss, save your work before
initiating Sleep.
WARNING! If a critical battery level occurs while the computer is in the

Sleep state, the computer initiates Hibernation and the information stored is
saved to the hard drive.
Using the keyboard 31

Using the action keys
An action key performs an assigned function. The icon on each of the f1 through f12 keys, and the
volume (5), and Sleep (7) keys illustrates the assigned function for that key.
▲ To use an action key function, press and hold the key.
Icon Key Description
f1 Allows you to view two apps simultaneously. The apps are displayed side by side.
f2 Switches between open apps.
NOTE: Continue to press this key until the app you want is displayed.
f3 Shows the commands available in an app.
f4 Shows a list of recently used apps.
f5 Plays the previous track of an audio CD or the previous section of a DVD or a Blu-ray Disc (BD).
f6 Begins, pauses, or resumes playback of an audio CD, a DVD, or a BD.
f7 Stops playing an audio CD, DVD, or a BD.
f8 Plays the next track of an audio CD or the next section of a DVD or a BD.
f9 Opens the Search charm. Allows you to search an open app or another app, your computer, and
the Internet.
f10 Opens the Share charm. Allows you to share pictures, files, or webpages.
f11 Opens the Devices charm. Allows you to set up printers and synchronize data with your phone
and stream video to your wireless TV.
f12 Opens the Settings charm. Allows you to personalize your computer: Change your account
picture, specify the background and color of your Start screen, and more.
Mutes or restores speaker sound.
Decreases speaker volume incrementally as long as you hold down the key.

Icon Key Description
Increases speaker volume incrementally as long as you hold down the key.
Initiates Sleep, which saves your information in the system. The display and other system
components turn off and power is conserved.
To exit Sleep, briefly press the power button.
CAUTION: To reduce the risk of information loss, save your work before initiating Sleep.
WARNING! If a critical battery level occurs while the computer is in the Sleep state, the
computer initiates Hibernation and the information stored is saved to the hard drive.
Using Microsoft Windows 8 shortcut keys

Microsoft Windows 8 provides shortcuts to perform actions quickly. Several shortcuts will help you
with Windows 8 functions. Press the Windows logo key in combination with a designated key in
the table to perform the action.
For additional information on Windows 8 shortcut keys, go to Help and Support. From the Start
screen, type h, and then select Help and Support.
Shortcut Keys
Shortcut Key Description

key
Returns you to the Start screen from an open app or the Windows desktop.
Pressing the key again returns you to the previous screen.
+ c Opens the charms.
+ d Opens the Windows desktop.
+ tab Switches between open apps.
NOTE: Continue to press this key combination until the app you want
displays.
alt + f4 Closes an active app.
Using the integrated numeric keypad

The computer includes an external wireless keyboard that includes a numeric keypad.
Using the keyboard 33

num lock key Controls the function of the integrated numeric keypad. Press the
key to alternate between the standard numeric function found on
an external keypad (this function is turned on at the factory) and
the navigational function (indicated by the directional arrows on
the keys).
NOTE: The keypad function that is active when the computer is

turned off is reinstated when the computer is turned back on.
Integrated numeric keypad Set at the factory to function like an external numeric keypad. To
alternate between this numeric function and the navigational
function (indicated by the directional arrows on the keys), press
the num lock key.

6 Managing power
Initiating Sleep and Hibernation

Windows has two power-saving states, Sleep and Hibernation.
● Sleep–The Sleep state is automatically initiated after a period of inactivity. Your work is saved to
memory, allowing you to resume working very quickly. You can also initiate Sleep manually. For
more information, see Manually initiating and exiting Sleep on page 35.
● Hibernation–The Hibernation state is automatically initiated if the computer is in the Sleep state
for an extended period. Hibernation puts your open documents and programs on your hard
drive, and then turns off your computer.
NOTE: You can manually initiate Hibernation. See Manually initiating and exiting Sleep
on page 35 and Manually initiating and exiting Hibernation on page 36.
CAUTION: To reduce the risk of possible audio and video degradation, loss of audio or video
playback, or loss of information, do not initiate Sleep while reading from or writing to a disc or an
external media card.
NOTE: You cannot connect to a network or perform any computer functions while the computer is in
the Sleep state or in Hibernation.
Manually initiating and exiting Sleep

▲ To initiate Sleep, from the Start screen, point to the far-right upper or lower corner of the screen
to display the charms. Click Settings, click the Power icon, and then select Sleep.
To exit Sleep:
● Briefly press the power button.
● Press a key on the keyboard.
When the computer exits Sleep, the power lights turn on and your work returns to the screen.
NOTE: If you have set a password to be required on wakeup, you must enter your Windows
password before your work will return to the screen.
Initiating Sleep and Hibernation 35

Manually initiating and exiting Hibernation
You can enable user-initiated Hibernation and change other power settings and timeouts using Power
Options in Control Panel.
1. From the Start screen, type power, select Settings, and then select Power Options.
2. In the left pane, select Choose what the power button does.
3. Select Change Settings that are currently unavailable.
4. In the When I press the power button area, select Hibernate.
5. Click Save changes.
To exit Hibernation, briefly press the power button.
When the computer exits Hibernation, the power lights turn on and your work returns to the screen. If
you have set a password to be required on wakeup, you must enter your Windows password before
your work will return to the screen.
Setting password protection on wakeup

To set the computer to prompt for a password when the computer exits Sleep or Hibernation, follow
these steps:
1. From the Start screen, type power, select Settings, and then select Power Options.
2. In the left pane, select Require a password on wakeup.
3. Select Change Settings that are currently unavailable.
4. Select Require a password (recommended).
NOTE: If you need to create a user account password or change your current user account
password, click Create or change your user account password, and then follow the on-
screen instructions. If you do not need to create or change a user account password, go to step
5.
5. Click Save changes.
Shutting down (turning off) the computer

CAUTION: Unsaved information is lost when the computer shuts down.
The Shut down command closes all open programs, including the operating system, and then turns
off the computer.
Shut down the computer under any of the following conditions:
● When you need to access components inside the computer
● When you are connecting an external hardware device to a port other than a USB or video port
● When the computer will be unused and disconnected from external power for an extended
period
36 Chapter 6 Managing power

Although you can shut down the computer with the power button, the recommended procedure is to
use the turn off command, as follows:
NOTE: If the computer is in the Sleep state or in Hibernation, you must first exit Sleep or
Hibernation before shutdown is possible.
1. Save your work and close all open programs.
2. From the Start screen, point to the far-right upper or lower corner of the screen to display
charms, and then click Settings.
3. Click the Power icon, and then click Shut down.
If the computer is unresponsive and you are unable to use the preceding shutdown procedures, try
the following emergency procedures in the sequence provided:
● Press ctrl+alt+delete. Click the Power icon in the lower-right corner of the screen, and then click
Shut Down.
● Press and hold the power button for at least 5 seconds.
● Press and hold the power button and the mute button.
● Disconnect the computer from external power.
Shutting down (turning off) the computer 37

7 Managing and sharing information
Drives are digital storage devices that help you store, manage, share, and access information. Your
computer has an internal hard drive that stores your personal files and your computer's software and
operating system. For added capacity or functionality, connect an external drive (purchased
separately), such as an optical drive or hard drive.
To quickly transfer information, connect a USB flash drive to the USB port on your computer, or insert
the memory card from your phone or camera into the memory card reader.
NOTE: For more information about required software and drivers, or to learn which computer port to
use, see the manufacturer's instructions.
Using a USB device

Most computers have at least one USB port, because this versatile interface allows you to connect to
numerous kinds of external devices to your computer.
Your computer may have more than one type of USB port. See Getting to know your computer
on page 5 for the types of USB ports on this computer. Be sure to purchase devices that are
compatible with your computer.
38 Chapter 7 Managing and sharing information

Connecting a USB device
CAUTION: To reduce the risk of damage to a USB connector, use minimal force to connect the
device.
▲ Connect the USB cable for the device to the USB port.
A sound indicates that the device has been detected.
NOTE: The first time you connect a USB device, a message displays on the Windows desktop and
an icon in the notification area lets you know that the device is recognized by the computer.
Removing a USB device

CAUTION: To reduce the risk of damage to a USB connector, do not pull on the cable to remove
the USB device.
CAUTION: To reduce the risk of loss of information or an unresponsive system, use the following
procedure to safely remove the USB device.
1. Save your information and close all programs associated with the device.
2. From the Windows desktop, click the hardware icon in the notification area, at the far right of the
taskbar. A message, Safely remove hardware and eject media displays.
3. Follow the on-screen instructions.
Using a USB device 39

Inserting and removing a memory card
To insert a memory card:
CAUTION: To reduce the risk of damage to the memory card connectors, use minimal force to
insert a memory card.
1. Hold the card label-side up, with the connectors facing the computer.
2. Insert the card into the memory card reader, and then press in on the card until it is firmly
seated.
A sound indicates that the device has been detected.
To remove a memory card:
1. Save your information and close all programs associated with the card.
2. From the Windows desktop, click the remove hardware icon in the notification area, at the far
right of the taskbar. Then, follow the on-screen instructions.
3. Press in on the card (1), and then remove it from the slot (2).
40 Chapter 7 Managing and sharing information

8 Maintaining peak performance
Keep your computer at peak operating performance using the practices and tools described in this
chapter. Start with routine maintenance, keep the equipment clean, and regularly update software.
Also pay attention to important security issues, including passwords, virus protection, and anti-theft
measures. Finally, find out how to access your system settings when you need to contact support or
run diagnostics on your computer system.
Performing routine maintenance

Using Disk Cleanup
Disk Cleanup searches the hard drive for unnecessary files that you can safely delete to free up disk
space and help the computer run more efficiently.
To run Disk Cleanup:
1. From the Start screen, type disk.
2. Click Settings, and then select Free up disk space by deleting unnecessary files.
Using Disk Defragmenter

As you use your computer over time, the files on the hard drive become fragmented. Because of this,
the hard drive works harder to locate files, and the computer slows down. Disk Defragmenter
consolidates and reorganizes the fragmented files on the hard drive so that the system can run more
efficiently.
Depending on the size of your hard drive and the number of fragmented files, Disk Defragmenter may
need more than an hour to complete the task.
To run Disk Defragmenter:
1. From the Start screen, type disk.
2. Click Settings, and then select Defragment and optimize your drives.
Updating programs and drivers

HP recommends that you update your programs and drivers on a regular basis. Updates can resolve
issues and bring new features and options to your computer.
Performing routine maintenance 41

Go to the HP support website to download the latest versions of HP programs and drivers. For U.S.
support, go to http://www.hp.com/go/contactHP. For worldwide support, go to http://welcome.hp.com/
country/us/en/wwcontact_us.html. At this location, you can also register to receive automatic
notifications when updates become available.
42 Chapter 8 Maintaining peak performance

Cleaning your computer
Use the following products to safely clean your computer:
● Dimethyl benzyl ammonium chloride 0.3 percent maximum concentration (For example:
Disposable wipes, which come in a variety of brand names.)
● Alcohol-free glass cleaning fluid
● Water with mild soap solution
● Dry microfiber cleaning cloth or a chamois (static-free cloth without oil)
● Static-free cloth wipes
CAUTION: Avoid strong cleaning solvents that can permanently damage your computer. If you are
not sure that a cleaning product is safe for your computer, check the product contents to make sure
that ingredients such as alcohol, acetone, ammonium chloride, methylene chloride, and hydrocarbons
are not included in the product.
Fibrous materials, such as paper towels, can scratch the computer. Over time, dirt particles and
cleaning agents can get trapped in the scratches.
Cleaning procedures
Follow the procedures in this section to safely clean your computer.
WARNING! To prevent electric shock or damage to components, do not attempt to clean your
computer while it is turned on.
Turn off the computer.
Disconnect external power.
Disconnect all powered external devices.
CAUTION: To prevent damage to internal components, do not spray cleaning agents or liquids
directly on any computer surface. Liquids dripped on the surface can permanently damage internal
components.
Cleaning the display (All-in-Ones or Notebooks)

Gently wipe the display using a soft, lint-free cloth moistened with an alcohol-free glass cleaner. Be
sure that the display is dry before closing the display.
Cleaning the sides or cover

To clean the sides or cover, use a soft microfiber cloth or chamois moistened with one of the cleaning
solutions listed previously or use an acceptable disposable wipe.
NOTE: When cleaning the cover of the computer, use a circular motion to aid in removing dirt and
debris.
Performing routine maintenance 43

Cleaning the keyboard or mouse
WARNING! To reduce the risk of electric shock or damage to internal components, do not use a
vacuum cleaner attachment to clean the keyboard. A vacuum cleaner can deposit household debris
on the keyboard surface.
CAUTION: To prevent damage to internal components, do not allow liquids to drip between the
keys.
● To clean the keyboard or mouse, use a soft microfiber cloth or a chamois moistened with one of
the cleaning solutions listed previously or use an acceptable disposable wipe.
● To prevent keys from sticking and to remove dust, lint, and particles from the keyboard, use a
can of compressed air with a straw extension.

Using security measures
A password is a group of letters, numbers, and symbols that you choose to secure your computer
information and to protect online transactions. Several types of passwords can be set. Some sites
dictate the number and combination of letters, numbers, or symbols they require for passwords.
Use the following tips for creating and saving passwords:
● To reduce the risk of being locked out of the computer, record each password and store it in a
secure place away from the computer. Do not store passwords in a file on the computer.
● Change your passwords frequently.
● Before you send your computer for service, back up your files, delete confidential files, and then
remove all password settings.
For additional information about passwords, such as screen-saver passwords, go to Help and
Support. From the Start screen, type h, and then select Help and Support.
Setting Windows passwords

Password Function
User password Protects access to a Windows user account.
Administrator password Protects administrator-level access to computer contents.
NOTE: This password cannot be used to access Computer

Setup (BIOS) contents.
Using security measures 45

Setting Computer Setup (BIOS) passwords
Password Function
Administrator password ● Must be entered each time you access Computer Setup
(BIOS).
● If you forget your administrator password, you cannot

access Computer Setup (BIOS).
NOTE: The administrator password can be used in place of

the power-on password.
NOTE: Your administrator password is not interchangeable

with an administrator password set in Windows, nor is it
revealed as it is set, entered, changed, or deleted.
NOTE: If you enter the power-on password at the first

password check, you must enter the administrator password
to access Computer Setup (BIOS).
Power-on password ● Must be entered each time you turn on or restart the
computer.
● If you forget your power-on password, you cannot turn

on or restart the computer.
NOTE: The administrator password can be used in place of

the power-on password.
NOTE: A power-on password is not revealed as it is set,

entered, changed, or deleted.
To set, change, or delete an administrator or power-on password in Computer Setup (BIOS):
1. To start Computer Setup (BIOS), turn on or restart the computer, quickly press esc, and then
press f10.
2. Use the arrow keys to select Security, and then follow the on-screen instructions.
Your changes take effect when the computer restarts.
Using Internet security software

When you use your computer to access email, a network, or the Internet, you expose your computer
to viruses, spyware, and other online threats. To help protect your computer, Internet security
software that includes antivirus and firewall features is preinstalled on your computer.
▲ To access Norton Internet Security, from the Start screen, type n, and then select Norton
Internet Security.
For more information about protecting your computer from Internet threats, go to Help and Support.
From the Start screen, type h, and then select Help and Support.

Installing software updates
Installing Windows updates
Updates to the operating system and other software may have become available after the computer
left the factory. Microsoft sends out alerts regarding critical updates. To protect the computer from
security breaches and computer viruses, install all critical updates from Microsoft as soon as you
receive an alert.
To be sure that all available updates are installed on the computer, observe these guidelines:
● Run Windows Update as soon as possible after you set up your computer. From the Start
screen, type u, select Settings, and then select Windows Update.
● Enable automatic Windows Update thereafter.
Updating software
HP recommends that you regularly update the software and drivers that were originally installed on
your computer. To download the latest versions, go to http://www.hp.com/support. At this location,
you can also register to receive automatic update notifications when updates become available.
If you have installed software from other companies, regularly update the software to correct security
problems and improve the performance of the software.
Using security measures 47

9 Using Computer Setup (BIOS) and HP
PC Hardware Diagnostics (UEFI)
Computer Setup, or Basic Input/Output System (BIOS), controls communication between all the input
and output devices on the system (such as disk drives, display, keyboard, mouse, and printer).
Computer Setup (BIOS) includes settings for the types of devices installed, the startup sequence of
the computer, and the amount of system and extended memory.
Starting Computer Setup (BIOS)

To start Computer Setup (BIOS), turn on or restart the computer, quickly press esc, and then press
f10.
NOTE: Use extreme care when making changes in Computer Setup (BIOS). Errors can prevent the
computer from operating properly.
Updating the BIOS

Updated versions of the BIOS may be available on the HP website.
Most BIOS updates on the HP website are packaged in compressed files called SoftPaqs.
Some download packages contain a file named Readme.txt, which contains information regarding
installing and troubleshooting the file.
Determining the BIOS version

To determine whether available BIOS updates contain later BIOS versions than those currently
installed on the computer, you need to know the version of the system BIOS currently installed.
BIOS version information (also known as ROM date and System BIOS) can be revealed by pressing
fn+esc (if you are already in Windows) or by using Computer Setup (BIOS).
1. Start Computer Setup (BIOS) (see Starting Computer Setup (BIOS) on page 48.
2. Use the arrow keys to select File and then select System Information.
3. To exit Computer Setup (BIOS) without saving your changes, use the arrow keys to select File,
and then select Ignore Changes and Exit.
4. Select Yes.
48 Chapter 9 Using Computer Setup (BIOS) and HP PC Hardware Diagnostics (UEFI)

Downloading a BIOS update
CAUTION: To reduce the risk of damage to the computer or an unsuccessful installation, download
and install a BIOS update only when the computer is connected to reliable external power using the
AC adapter. Do not download or install a BIOS update while the computer is running on battery
power, docked in an optional docking device, or connected to an optional power source. During the
download and installation, follow these instructions:
Do not disconnect power from the computer by unplugging the power cord from the AC outlet.
Do not shut down the computer or initiate Sleep.
Do not insert, remove, connect, or disconnect any device, cable, or cord.
1. From the Start screen, type support, and then select the HP Support Assistant app.
2. Click Updates and tune-ups, and then click Check for HP updates now.
4. At the download area, follow these steps:
a. Identify the most recent BIOS update and compare it to the BIOS version currently installed
on your computer. If the update is more recent than your BIOS, make a note of the date,
name, or other identifier. You may need this information to locate the update later, after it
has been downloaded to your hard drive.
b. Follow the on-screen instructions to download your selection to the hard drive.
If the update is more recent than your BIOS, make a note of the path to the location on your
hard drive where the BIOS update is downloaded. You will need to access this path when
you are ready to install the update.
NOTE: If you connect your computer to a network, consult the network administrator before
installing any software updates, especially system BIOS updates.
BIOS installation procedures vary. Follow any instructions that are revealed on the screen after the
download is complete. If no instructions are revealed, follow these steps:
1. From the Start screen, type e, and then select File Explorer.
2. Click your hard drive designation. The hard drive designation is typically Local Disk (C:).
3. Using the hard drive path you recorded earlier, open the folder on your hard drive that contains
the update.
4. Double-click the file that has an .exe extension (for example, filename.exe).
The BIOS installation begins.
5. Complete the installation by following the on-screen instructions.
NOTE: After a message on the screen reports a successful installation, you can delete the
downloaded file from your hard drive.
Updating the BIOS 49

Using HP PC Hardware Diagnostics (UEFI)
HP PC Hardware Diagnostics is a Unified Extensible Firmware Interface (UEFI) that allows you to run
diagnostic tests to determine whether the computer hardware is functioning properly. The tool runs
outside the operating system so that it can isolate hardware failures from issues that are caused by
the operating system or other software components.
To start HP PC Hardware Diagnostics UEFI:
1. Turn on or restart the computer, quickly press esc, and then press f2.
The BIOS searches three places for the HP PC Hardware Diagnostics (UEFI) tools in the
following order:
a. Connected USB drive
NOTE: To download the HP PC Hardware Diagnostics (UEFI) tool to a USB drive, see
Downloading HP PC Hardware Diagnostics (UEFI) to a USB device on page 50.
b. Hard drive
c. BIOS
2. Click the type of diagnostic test you want to run, and then follow the on-screen instructions.
NOTE: If you need to stop a diagnostic test, press esc.
Downloading HP PC Hardware Diagnostics (UEFI) to a USB device

NOTE: The HP PC Hardware Diagnostics (UEFI) download instructions are provided in English
only.
1. Go to http://www.hp.com.
2. Click Support & Drivers, and then click the Drivers & Software tab.
3. Enter the product name in the text box, and then click Search.
4. Select your computer model, and then select your operating system.
5. In the Diagnostic section, click HP UEFI Support Environment.
– or –
Click Download, and then select Run.
50 Chapter 9 Using Computer Setup (BIOS) and HP PC Hardware Diagnostics (UEFI)

10 Backing up, restoring, and recovering
Your computer includes tools provided by HP and Windows to help you safeguard your information
and retrieve it if you ever need to. These tools will help you return your computer to a proper working
state or even back to the original factory state, all with simple steps.
This chapter provides information about the following processes:
● Creating recovery media and backups
● Restoring and recovering your system
NOTE: This chapter describes an overview of backing up, restoring and recovering options. For
more details about the tools provided, see Help and Support. From the Start screen, type h, and then
select Help and Support.
51
Creating recovery media and backups
Recovery after a system failure is only as good as your most recent backup.
1. After you successfully set up the computer, create HP Recovery media. This step creates a
backup of the HP Recovery partition on the computer. The backup can be used to reinstall the
original operating system in cases where the hard drive is corrupted or has been replaced.
HP Recovery media you create will provide the following recovery options:
● System Recovery—Reinstalls the original operating system and the programs that were
installed at the factory.
● Minimized Image Recovery—Reinstalls the operating system and all hardware-related

drivers and software, but not other software applications.
● Factory Reset—Restores the computer to its original factory state by deleting all
information from the hard drive and re-creating the partitions. Then it reinstalls the
operating system and the software that was installed at the factory.
See Creating HP Recovery media on page 52.
2. As you add hardware and software programs, create system restore points. A system restore
point is a snapshot of certain hard drive contents saved by Windows System Restore at a
specific time. A system restore point contains information that Windows uses, such as registry
settings. Windows creates a system restore point for you automatically during a Windows update
and during other system maintenance (such as a software update, security scanning, or system
diagnostics). You can also manually create a system restore point at any time. For more
information and steps for creating specific system restore points, see Help and Support. From
the Start screen, type h, and then select Help and Support.
3. As you add photos, video, music, and other personal files, create a backup of your personal
information. Windows File History can be set to regularly and automatically back up files from
libraries, desktop, contacts, and favorites. If files are accidentally deleted from the hard drive and
they can no longer be restored from the Recycle Bin, or if files become corrupted, you can
restore the files that you backed up using File History. Restoring files is also useful if you ever
choose to reset the computer by reinstalling Windows or choose to recover using HP Recovery
Manager.
NOTE: File History is not enabled by default, so you must turn it on.
For more information and steps for enabling Windows File History, see Help and Support. From
the Start screen, type h, and then select Help and Support.
Creating HP Recovery media

HP Recovery Manager is a software program that offers a way to create recovery media after you
successfully set up the computer. HP Recovery media can be used to perform system recovery if the
hard drive becomes corrupted. System recovery reinstalls the original operating system and the
software programs installed at the factory, and then configures the settings for the programs. HP
52 Chapter 10 Backing up, restoring, and recovering

Recovery media can also be used to customize the system or restore the factory image if you replace
the hard drive.
● Only one set of HP Recovery media can be created. Handle these recovery tools carefully, and
keep them in a safe place.
● HP Recovery Manager examines the computer and determines the required storage capacity for
the blank USB flash drive or the number of blank DVD discs that will be required.
● To create recovery discs, your computer must have an optical drive with DVD writer capability,
and you must use only high-quality blank DVD-R, DVD+R, DVD-R DL, or DVD+R DL discs. Do
not use rewritable discs such as CD±RW, DVD±RW, double-layer DVD±RW, or BD-RE
(rewritable Blu-ray) discs; they are not compatible with HP Recovery Manager software. Or
instead you can use a high-quality blank USB flash drive.
● If your computer does not include an integrated optical drive with DVD writer capability, but you
would like to create DVD recovery media, you can use an external optical drive (purchased
separately) to create recovery discs, or you can obtain recovery discs for your computer from the
HP website. For U.S. support, go to http://www.hp.com/go/contactHP. For worldwide support, go
to http://welcome.hp.com/country/us/en/wwcontact_us.html. If you use an external optical drive,
it must be connected directly to a USB port on the computer; the drive cannot be connected to a
USB port on an external device, such as a USB hub.
● Be sure that the computer is connected to AC power before you begin creating the recovery
media.
● The creation process can take up to an hour or more. Do not interrupt the creation process.
● If necessary, you can exit the program before you have finished creating all of the recovery
DVDs. HP Recovery Manager will finish burning the current DVD. The next time you start HP
Recovery Manager, you will be prompted to continue, and the remaining discs will be burned.
To create HP Recovery media:
1. From the Start screen, type recovery, and then select HP Recovery Manager.
2. Select Recovery Media Creation, and then follow the on-screen instructions.
If you ever need to recover the system, see Recovering using HP Recovery Manager on page 56.
Creating recovery media and backups 53

Restore and recovery
There are several options for recovering your system. Choose the method that best matches your
situation and level of expertise:
● If you need to restore your personal files and data, you can use Windows File History to restore
your information from the backups you created. For more information and steps for using File
History, see Help and Support. From the Start screen, type h, and then select Help and
Support.
● If you need to correct a problem with a preinstalled application or driver, use the Drivers and
Applications Reinstall option of HP Recovery Manager to reinstall the individual application or
driver.
From the Start screen, type recovery, select HP Recovery Manager, select Drivers and
Applications Reinstall, and then follow the on-screen instructions.
● If you want to restore the system to a previous state without losing any personal information,
Windows System Restore is an option. System Restore allows you to restore without the
requirements of Windows Refresh or a reinstallation. Windows creates system restore points
automatically during a Windows update and other system maintenance events. Even if you did
not manually create a restore point, you can choose to restore to an automatically created
restore point. For more information and steps for using Windows System Restore, see Help and
Support. From the Start screen, type h, and then select Help and Support.
● If you want a quick and easy way to recover the system without losing your personal information,
settings, or apps that came preinstalled on your computer or were purchased from the Windows
Store, consider using Windows Refresh. This option does not require backing up data to another
drive. See Using Windows Refresh for quick and easy recovery on page 55.
● If you want to reset your computer to its original state, Windows provides an easy way to remove
all personal data, apps, and settings, and reinstall Windows.
For more information, see Remove everything and reinstall Windows on page 55.
● If you want to reset your computer using a minimized image, you can choose the HP Minimized
Image Recovery option from the HP Recovery partition (select models only) or HP Recovery
media. Minimized Image Recovery installs only drivers and hardware-enabling applications.
Other applications included in the image continue to be available for installation through the
Drivers and Applications Reinstall option in HP Recovery Manager.
For more information, see Recovering using HP Recovery Manager on page 56.
● If you want to recover the computer's original factory partitioning and content, you can choose
the System Recovery option from the HP Recovery partition (select models only) or use the HP
Recovery media that you have created. For more information, see Recovering using HP
Recovery Manager on page 56. If you have not already created recovery media, see Creating
HP Recovery media on page 52.
● If you have replaced the hard drive, you can use the Factory Reset option of HP Recovery
media to restore the factory image to the replacement drive. For more information, see
Recovering using HP Recovery Manager on page 56.
● If you wish to remove the recovery partition to reclaim hard drive space, HP Recovery Manager
offers the Remove Recovery Partition option.
For more information, see Removing the HP Recovery partition on page 58.

Using Windows Refresh for quick and easy recovery
When your computer is not working properly and you need to regain system stability, the Windows
Refresh option allows you to start fresh and keep what is important to you.
IMPORTANT: Refresh removes any traditional applications that were not originally installed on the
system at the factory. Any Windows 8 apps that came preinstalled on your computer and any that
were purchased from the Windows Store will be saved.
NOTE: During Refresh, a list of removed traditional applications will be saved so that you have a
quick way to see what you might need to reinstall. See Help and Support for instructions on
reinstalling traditional applications. From the Start screen, type h, and then select Help and Support.
NOTE: You may be prompted for your permission or password when using Refresh. See Help and
Support for more information. From the Start screen, type h, and then select Help and Support.
To start Refresh:
1. From the Start screen, point to the upper-right or lower-right corner of the screen to reveal the
charms.
2. Click Settings.
3. Click Change PC settings in the bottom-right corner of the screen, and then select General
from the PC settings screen.
4. Scroll the right-side choices down to display Refresh your PC without affecting your files.
5. Under Refresh your PC without affecting your files, select Get started, and then follow the
on-screen instructions.
Remove everything and reinstall Windows

Sometimes you want to perform detailed reformatting of your computer, or you want to remove
personal information before you give away or recycle your computer. The process described in this
section provides a speedy, simple way to return the computer to its original state. This option
removes all personal data, apps, and settings from your computer, and reinstalls Windows.
IMPORTANT: This option does not provide backups of your information. Before using this option,
back up any personal information you wish to retain.
You can initiate this option by using the f11 key or from the Start screen.
To use the f11 key:
1. Press f11 while the computer boots.
– or –
Press and hold f11 as you press the power button.
2. Choose your keyboard layout.
3. Select Troubleshoot from the boot options menu.
4. Select Reset your PC, and then follow the on-screen instructions.
Restore and recovery 55

To use the Start screen:
1. From the Start screen, point to the upper-right or lower-right corner of the screen to reveal the
charms.
2. Click Settings.
3. Click Change PC settings in the bottom-right corner of the screen, and then select General
from the PC settings screen.
4. Scroll the right-side choices down to display Remove everything and reinstall Windows.
5. Under Remove everything and reinstall Windows, select Get started, and follow the on-
screen instructions.
Recovering using HP Recovery Manager

HP Recovery Manager software allows you to recover the computer to its original factory state by
using the HP Recovery media that you created or by using the HP Recovery partition (select models
only). If you have not already created recovery media, see Creating HP Recovery media on page 52.
Using HP Recovery media, you can choose from one of the following recovery options:
● System Recovery—Reinstalls the original operating system, and then configures the settings for
the programs that were installed at the factory.
● Minimized Image Recovery (select models only)—Reinstalls the operating system and all
hardware-related drivers and software, but not other software applications.
● Factory Reset—Restores the computer to its original factory state by deleting all information
from the hard drive and re-creating the partitions. Then it reinstalls the operating system and the
software that was installed at the factory.
The HP Recovery partition (select models only) allows System Recovery and Minimized Image
Recovery.
What you need to know

● HP Recovery Manager recovers only software that was installed at the factory. For software not
provided with this computer, you must either download the software from the manufacturer's
website or reinstall the software from the media provided by the manufacturer.
● Recovery through HP Recovery Manager should be used as a final attempt to correct computer
issues.
● HP Recovery media must be used if the computer hard drive fails. If you have not already
created recovery media, see Creating HP Recovery media on page 52.
● To use the Factory Reset option, you must use HP Recovery media. If you have not already
created recovery media, see Creating HP Recovery media on page 52.
● If the HP Recovery media does not work, you can obtain recovery media for your system from
the HP website. For U.S. support, go to http://www.hp.com/go/contactHP. For worldwide
support, go to http://welcome.hp.com/country/us/en/wwcontact_us.html.
IMPORTANT: HP Recovery Manager does not automatically provide backups of your personal
data. Before beginning recovery, back up any personal data you wish to retain.

Using the HP Recovery partition (select models only)
The HP Recovery partition (select models only) allows you to perform a system recovery or
minimized image recovery without the need for recovery discs or a recovery USB flash drive. This
type of recovery can only be used if the hard drive is still working.
To start HP Recovery Manager from the HP Recovery partition:
1. Press f11 while the computer boots.
– or –
Press and hold f11 as you press the power button.
2. Choose your keyboard layout.
3. Select Troubleshoot from the boot options menu.
4. Select Recovery Manager, and follow the on-screen instructions.
Using HP Recovery media to recover

You can use HP Recovery media to recover the original system. This method can be used if your
system does not have an HP Recovery partition or if the hard drive is not working properly.
1. If possible, back up all personal files.
2. Insert the first HP Recovery disc you created into the optical drive on your computer or into an
optional external optical drive, and then restart the computer.
– or –
Insert the HP Recovery USB flash drive you created into a USB port on your computer, and then
restart the computer.
NOTE: If the computer does not automatically restart in HP Recovery Manager, change the
computer boot order. See Changing the computer boot order on page 57.
Changing the computer boot order

If computer does not restart in HP Recovery Manager, you can change the computer boot order,
which is the order of devices listed in BIOS where the computer looks for startup information. You can
change the selection for an optical drive or a USB flash drive.
To change the boot order:
1. Insert the HP Recovery media you created.
2. Restart the computer, quickly press esc, and then press f9 for boot options.
3. Select the optical drive or USB flash drive you want to boot from.
Restore and recovery 57

Removing the HP Recovery partition
HP Recovery Manager software allows you to remove the HP Recovery partition to free up hard drive
space.
IMPORTANT: After you remove the HP Recovery partition, you can no longer use the Windows
Refresh option, the Windows option to remove everything and reinstall Windows, or the HP Recovery
Manager option. So before you remove the Recovery partition, create HP Recovery media; see
Creating HP Recovery media on page 52.
Follow these steps to remove the HP Recovery partition:
1. From the Start screen, type recovery, and then select HP Recovery Manager.
2. Select Remove Recovery Partition, and then follow the on-screen instructions.

11 Troubleshooting
Wireless connection problems

Some possible causes for wireless connection problems include the following:
● Wireless device is not turned on.
● Wireless device is not installed correctly or has been disabled.
● Wireless device encountered interference from other devices.
● Wireless device or router hardware has failed.
Cannot connect to a WLAN

If you have a problem connecting to a WLAN, confirm that the integrated WLAN device is turned on
and properly installed on your computer.
1. Be sure that the wireless device is turned on.
2. Then try connecting to the WLAN again.
If you are still unable to connect, follow the steps below.
2. Select System and Security, and then in the System area, click Device Manager.
3. Click the arrow next to Network adapters to expand the list and show all adapters.
4. Identify the WLAN device from the Network adapters list. The listing for a WLAN device may
include the term wireless, wireless LAN, WLAN, or 802.11.
If no WLAN device is listed, either your computer does not have an integrated WLAN device, or
the driver for the WLAN device is not properly installed.
For more information about troubleshooting WLANs, see the website links provided in Help and
Support.
Cannot connect to a preferred network

You may not be able to connect to a preferred network because it is a security-enabled WLAN. You
must have the security code to connect to this type of WLAN. See the next section for additional
information.
Wireless connection problems 59

If entering a security code is not the problem, you may have a corrupted WLAN connection. Many
times, Windows can automatically repair a corrupted WLAN connection.
● If there is a network status icon in the notification area, at the far right of the taskbar, right-click
the icon, and then click Troubleshoot problems.
Windows resets your network device and attempts to reconnect to one of the preferred
networks.
● If there is no network status icon in the notification area, follow these steps:
2. Select Network and Internet, and then select Network and Sharing Center.
3. Select Troubleshoot problems, and then select the network you want to repair.
Current network security codes are unavailable

If you are prompted for a security code (or network key) or a name (SSID) when connecting to a
WLAN, the network is protected by security. The SSID and security code are alphanumeric codes
that you enter into your computer to identify your computer to the network. You must have the current
codes to connect to a secure network.
● For a network connected to your personal wireless router, review the router user guide for
instructions on setting up the same codes on both the router and the WLAN device.
● For a private network, such as a network in an office or at a public Internet chat room, contact
the network administrator to obtain the codes, and then enter the codes when your are prompted
to do so.
Some networks change the SSID or network keys used in their routers or access points on a
regular basis to improve security. You must change the corresponding code in your computer
accordingly.
If you are provided with a new wireless network key and SSID for a network, and if you have
previously connected to that network, follow the steps below to reconnect to the network:
1. From the Windows desktop, click the network status icon in the notification area, at the far right
of the taskbar.
A list showing the available WLANs is displayed. If you are in a hotspot where several WLANs
are active, several will be displayed.
2. Right-click the network, and then click Properties.
NOTE: If the network you want is not listed, check with the network administrator to be sure
that the router or access point is operating.
3. Click the Security tab and enter the correct wireless encryption data into the Network security
key box.
4. Click OK to save these settings.
Cannot connect to the wireless router

If you are trying to connect to the wireless router and are unsuccessful, reset the wireless router by
removing power from the router for 10 to 15 seconds.
60 Chapter 11 Troubleshooting
If the computer still cannot connect to a WLAN, restart the wireless router. For details, see the router
manufacturer's instructions.
Network status icon is not displayed

If the network status icon is not displayed in the notification area after you configure the WLAN, the
software driver is either missing or corrupted. A Windows “Device not Found” error message may
also be displayed.
To resolve this problem, get the latest version of the WLAN device software and drivers for your
computer from http://www.hp.com.
1. Open your Internet browser.
2. For U.S. support, go to http://www.hp.com/go/contactHP. For worldwide support, go to

http://welcome.hp.com/country/us/en/wwcontact_us.html.
3. Click the option for software and driver downloads, and then type your computer model number
in the search box.
4. Press enter, and then follow the on-screen instructions.
NOTE: If the WLAN device you are using was purchased separately, consult the manufacturer's
website for the latest software.
Wireless connection problems 61

Power problems
Computer will not turn on or start
1. Shut down the computer.
2. Test the AC outlet by connecting a different electrical device to it.
3. Reconnect the computers cables, being sure that the connection from the AC adapter to the
computer and the connection from the AC adapter to the AC outlet are secure.
4. Try to turn on the computer.
● If the power lights turn on, the AC adapter is working properly.
● If the connections are secure and the power lights remain off, the AC adapter is not
functioning and should be replaced.
Contact support for information about obtaining a replacement AC power adapter.
Hard drive error

1. Press the ctrl+alt+delete keys simultaneously.
2. Click the Power icon, and then click Restart.
Or, press and hold the power button on the computer for 5 or more seconds to turn off the
computer, and then press the power button to turn on the computer.
3. If Windows opens, immediately back up all important information to an external hard drive.
4. Whether Windows started or not, contact support. Either the hard drive or the system board may
need to be replaced.
Computer is not responding

Use the Windows Task Manager to close any programs that are not responding.
1. Press the ctrl+alt+delete keys.
2. Click Task Manager.
3. Select any program that is not responding, and then click End Task.
If closing programs does not work, restart the computer.
1. Press the ctrl+alt+delete keys.
2. Click the Power icon, and then click Restart. Or, press and hold the power button on the
computer for 5 or more seconds to turn off the computer, and then press the power button to
turn on the computer.
Computer shuts down unexpectedly

● The computer might be in an exceedingly hot environment. Turn it off and let it cool down.
● Be sure that the computer vents are not blocked and that the internal fan is running. See Getting
to know your computer on page 5 for the location of the computer vents.
Computer Setup problems
The computer will not enter Computer Setup
If the computer will not enter Computer Setup when you press f10, press fn+f lock, and then try to
start Computer Setup again.
Computer Setup problems 63

Display problems
The display is blank
● Exit Sleep to redisplay the screen image.
◦ Press the power button briefly.
◦ Press a key on the keyboard.
◦ Press the space bar.
◦ Press the esc key.
● Press the power button to turn on the computer.
Images on the screen are too large or too small, or the images are fuzzy
Adjust the resolution settings.
2. Select Appearance and Personalization.
3. Under Display, select Adjust Screen Resolution.
4. Adjust resolution as necessary, and then click Apply.
Keyboard and mouse problems
● Be sure that you are using the keyboard or mouse within range of the receiver.
● Be sure that the mouse is not in Suspend mode, which occurs after 20 minutes of inactivity.
Click the left mouse button to reactivate it.
● Replace the batteries in the keyboard and mouse.
● Remove the wireless USB receiver on the bottom of the stand, and then reinsert it. Re-pair the
keyboard and mouse to the receiver.
NOTE: The illustrations below may look slightly different from your keyboard and mouse.
IMPORTANT: During these steps, place the keyboard and mouse on the same level as the
receiver.
To re-pair the keyboard and mouse:
1. Disconnect the receiver from the USB port on the bottom of the computer stand, and then
reconnect it. See Bottom on page 12 for the location of the USB port.
2. Be sure that the mouse is on (1), and then press and hold the Connect button (2) for 5 to 10
seconds, until the LED on the receiver lights up or stops flashing. To confirm the connection,
move the mouse and check for a response on the screen.
3. After the mouse connection is established, complete the following steps to re-pair the keyboard.
Keyboard and mouse problems 65

4. On the keyboard, press and hold the Connect button (3) for 5 to 10 seconds, until the LED on
the receiver lights up or stops flashing.
Audio problems
No sound is produced
● Be sure that you connected powered speakers and that they are turned on.
● Adjust the volume, either on the speakers or through the computer operating system.
● Turn off your computer, and then unplug and reconnect the speakers. Be sure that the speakers
are properly connected.
● Unplug headphones if they are connected to your computer (or speaker system).
● If the computer is in the Sleep state, exit Sleep by briefly pressing the power button.
● Check the audio functions.
To check the audio functions on your computer, follow these steps:
2. Select Hardware and Sound, and then select Sound.
3. When the Sound window opens, click the Sounds tab. Under Program Events, select any
sound event, such as a beep or alarm, and click the Test button.
You should hear sound through the speakers or through connected headphones.
To check the recording functions on your computer, follow these steps:
1. From the Start screen, type s, and then select Sound Recorder.
2. Click Start Recording and speak into the microphone. Save the file to your Windows desktop.
3. Open a multimedia program and play back the sound.
NOTE: To confirm or change the audio settings on your computer, from the Start screen, type c,
and then select Control Panel. Select Hardware and Sound, and then select Sound.
Audio problems 67
Software problems
● Shut down the computer, and then turn it on again.
● Update or reinstall the drivers. See Updating programs and drivers on page 41.
● Refresh or restore your computer. See Backing up, restoring, and recovering on page 51.
12 Specifications
Operating specifications
NOTE: To see the electrical ratings, refer to your computer’s ratings label, located on the outside of
the computer, to determine the exact electrical rating.
Factor Metric U.S.
Operating temperature 5°C to 35°C 41°F to 95°F
Storage temperature –30°C to 65°C –22°F to 149°F
Operating humidity 15% to 80% @ 26°C 15% to 80% @ 78°F
Operating altitude 0 m to 2000 m 0 ft to 6561 ft
Storage altitude 0 m to 4572 m 0 ft to 15,000 ft
Operating specifications 69
13 Electrostatic Discharge
Electrostatic discharge is the release of static electricity when two objects come into contact—for
example, the shock you receive when you walk across the carpet and touch a metal door knob.
A discharge of static electricity from fingers or other electrostatic conductors may damage electronic
components. To prevent damage to the computer, damage to a drive, or loss of information, observe
these precautions:
● If removal or installation instructions direct you to unplug the computer, be sure that you are
properly grounded before you unplug the computer or remove a cover.
● Keep components in their electrostatic-safe containers until you are ready to install them.
● Avoid touching pins, leads, and circuitry. Handle electronic components as little as possible.
● Use nonmagnetic tools.
● Before handling a component, discharge static electricity by touching an unpainted metal surface
of the component.
● If you remove a component, place it in an electrostatic-safe container.
If you need more information about static electricity or assistance with component removal or
installation, contact support.
70 Chapter 13 Electrostatic Discharge

Index
A C HDMI-in button, identifying 12

AC adapter light, identifying 10 cables, USB 39 HDMI-in port
action keys caring for your computer 43 connecting 20
identifying 31 cleaning your computer 43 HDMI-in port, identifying 9
next track or section 32 components headphone jack, identifying 10
play, pause, resume 32 back 11 headphones, connecting 20
previous 32 bottom 12 Hibernation
stop 32 front 6 exiting 36
using 32 left-side 9 initiating 36
antennas right-side 7 high-definition devices,
Near Field Communication computer reset 55 connecting 20
(NFC) 11 Computer Setup (BIOS) HP PC Hardware Diagnostics
audio for HDMI 21 passwords 46 (UEFI)
audio-in (microphone) jack, Computer Setup (BIOS), using downloading 50
identifying 10 48 HP Recovery Manager
audio-out (headphone) jack, connecting to a WLAN 16 correcting boot problems 57
identifying 10 corporate WLAN connection 16 starting 57
HP Recovery media
B D creating 52
backing up deleted files recovery 57
personal files 52 restoring 54 HP Recovery partition
backups 51 Disk Cleanup 41 recovery 57
Beats Audio 20 Disk Defragmenter software 41 removing 58
Beats Audio Control Panel 20 drivers, updating 41 hubs 38
best practices 1
BIOS E I
determining version 48 edge swipe gestures 29 installing, critical updates 47
downloading an update 49 edge—swipe gestures integrated numeric keypad,
updating 48 top-edge swipe 30 identifying 31, 34
Bluetooth device 14 electrical ratings 69 integrated webcam light,
Bluetooth label 13 electrostatic discharge 70 identifying 6
boot order Internet connection setup 15
changing HP Recovery F Internet security software, using
Manager 57 fn key, identifying 31 46
bottom 13 fun things to do 2 ISP 14
buttons
HDMI-in 12 H J
power 11 hard drive light, identifying 8 jacks
HDMI, using audio 21 audio-in (microphone) 10
Index 71
audio-out (headphone) 10 P reset
RJ-45 (network) 8 passwords computer 54, 55
Computer Setup (BIOS) 46 steps 55
K Windows 45 restore
keys pinching touch screen gesture 27 Windows File History 54
fn 31 ports right-edge swipe 29
Sleep 31 HDMI-in 9, 20 RJ-45 (network) jack, identifying
volume 31 USB 2.0 ports 8 8
Windows application 31 USB 3.0 7
Windows logo 31 USB 3.0 (charging) powered S
7 security cable slot, identifying 10
L power button, identifying 11 security, wireless 15
labels power connector, identifying 10 serial number 13
Bluetooth 13 product name and number, serial number, computer 13
regulatory 13 computer 13 setting password protection on
serial number 13 programs, updating 41 wakeup 36
wireless certification 13 public WLAN connection 16 setup of WLAN 15
WLAN 13 sharing media 22
LAN, connecting 17 R shortcut keys, Windows 8 33
left-edge swipe 29 re-pair, wireless keyboard and shutdown 36
lights mouse 65 Sleep
AC adapter 10 recovery exiting 35
hard drive 8 discs 53, 57 initiating 35
webcam 6 HP Recovery Manager 56 Sleep key, identifying 31
media 57 slots
M options 52 security cable 10
maintenance, Disk refresh 55 sMedio 360 software 22
Defragmenter 41 starting 57 software
memory card reader, identifying supported discs 53 CyberLink MediaSuite 21
12 system 56 Disk Defragmenter 41
memory card, inserting 40 USB flash drive 57 software updates, installing 47
microphone jack, identifying 10 using HP Recovery media 53 software, updating 47
microphones, identifying 6 recovery media speakers
minimized image creating 52 connecting 19
creating 56 creating using HP Recovery speakers, identifying 6
minimized image recovery 57 Manager 53 specifications 69
recovery partition subwoofer connector, identifying
N removing 58 8
Near Field Communication (NFC) recycle supported discs
antenna, identifying 11 computer 54, 55 recovery 53
NFC 22 refresh system recovery 56
NFC Android phone 23 computer 54 system restore point
num lock key, identifying 34 recovery 54 creating 52
Windows 55 restoring 54
O regulatory information
operating specifications 69 regulatory label 13 T
original system recovery 56 wireless certification labels 13 Touch screen gestures 29, 30
remove everything and reinstall edge–swipe gestures 29
Windows 55 one-finger slide 26
pinching 27
72 Index
rotating 28 Refresh 54, 55
scrolling 27 reinstall 54, 55
tapping 26 remove everything and reinstall
Touch screen, using 26 option 55
traveling with the computer 13 reset 55
troubleshooting 59 restoring files 54
audio functions 67 system restore point 52, 54
computer is not responding Windows application key,
62 identifying 31
computer shuts down Windows logo key, identifying 31
unexpectedly 62 Windows passwords 45
computer will not turn on 62 Windows updates, installing 47
display is blank 64 wired network, connecting 17
hard drive error 62 wireless certification label 13
images on screen problems wireless controls, operating
64 system 14
keyboard 65 wireless light 14
mouse 65 wireless network (WLAN)
re-pair the wireless keyboard connecting 16
and mouse 65 corporate WLAN connection
software problems 68 16
wireless connection 59 equipment needed 15
turning off the computer 36 functional range 16
public WLAN connection 16
U security 15
unresponsive system 36 using 15
USB 2.0 ports, identifying 8 wireless router 15
USB 3.0 (charging) powered port, WLAN antennas, identifying 6
identifying 7 WLAN device 13, 14
USB 3.0 port, identifying 7 WLAN label 13
USB cable, connecting 39
USB devices Z
connecting 39 zooming touch screen gesture 27
description 38
removing 39
USB hubs 38
V
video 20
volume keys, identifying 31
volume, adjusting 19
W
webcam
using 19
webcam light
identifying 6
webcam light, identifying 6
Windows
backup 52
File History 52, 54
Index 73

c03918575

Uploaded by

Document Informationclick to expand document information

Document Informationclick to expand document information

Copyright:

Available Formats

c03918575

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

c03918575

Uploaded by

Copyright:

Available Formats

User Guide

© Copyright 2013 Hewlett-Packard Product notice Software terms

First Edition: July 2013

Document Part Number: 730501-001

1 Starting right ................................................................................................................................................... 1

2 Getting to know your computer ..................................................................................................................... 5

3 Connecting to a network .............................................................................................................................. 14

4 Enjoying entertainment features ................................................................................................................. 18

5 Navigating using the keyboard and pointing devices ............................................................................... 25

6 Managing power ............................................................................................................................................ 35

8 Maintaining peak performance .................................................................................................................... 41

9 Using Computer Setup (BIOS) and HP PC Hardware Diagnostics (UEFI) ............................................... 48

10 Backing up, restoring, and recovering ..................................................................................................... 51

13 Electrostatic Discharge .............................................................................................................................. 70

2 Chapter 1 Starting right

Setup Instructions ● Overview of computer setup and features.

Windows 8 Basics guide ● Overview of using Windows® 8.

From the Start screen, type h, and then select Help

Go to http://www.hp.com/supportvideos (English only)

Troubleshooting ● Solutions to the following problems:

See Troubleshooting on page 59 in this guide for ◦ Wireless connection problems

◦ Keyboard and mouse problems

Safety & Comfort Guide ● Proper workstation setup.

Worldwide support web page ● Access to the following support options:

To get support in your language, go to ◦ Online chat with an HP technician.

◦ Support telephone numbers.

◦ HP service center locations.

Regulatory, Safety and Environmental Notices ● Important regulatory notices.

To access this guide, select the HP Support

Limited Warranty* ● Specific warranty information about this computer.

To access this guide, select the HP Support

4 Chapter 1 Starting right

Finding your hardware and software information

A list displays all the devices installed on your computer.

Swipe down from the top edge of the computer screen.

2. Select the All apps icon.

Finding your hardware and software information 5

(1) WLAN antennas (2)* Send and receive wireless signals.

(3) Webcam light On: The webcam is on.

(4) Webcam Records video and takes still photographs.

(5) Speakers (2) Produce sound.

6 Chapter 2 Getting to know your computer

NOTE: USB charging ports can also charge select models of

(3) Subwoofer connector Connects HP Pulse Subwoofer (purchased separately). The

(4) USB 2.0 ports (2) Connect optional USB devices.

(5) RJ-45 (network) jack Connects a network cable.

8 Chapter 2 Getting to know your computer

WARNING! To reduce the risk of personal injury, adjust the

NOTE: When a device is connected to the jack, the

NOTE: The security cable may not prevent the computer

● Off: The computer is using battery power.

(5) Power connector Connects an AC adapter.

10 Chapter 2 Getting to know your computer

For more information, see Start sharing media on page 23.

● When the computer is in the Sleep state, press the

● When the computer is in Hibernation, press the button

CAUTION: Pressing and holding down the power button

If the computer has stopped responding and Microsoft®