TORQUIMETRO TECH3XDM250(1)

N/PARTE: TECH3XDM250
DESIGNACION: TORQUIMETRO
17611 - WRENCH,TORQUE
A manual tool for tightening various fasteners to a precise torque value. Consists of a
handle and drive to accommodate female square drive sockets and other types of wrenching
adapters. Torque value may be manually set and adjusted by user or may be provided as
preset for production line use. A signaling device is generally provided to indicate when set
torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply
torque. For items with handles that are spun in-line with axis of fastener rotation to apply
torque, see SCREWDRIVER, TORQUE.
FSC Information
5120 Hand Tools, Nonedged, Nonpowered
6520 Dental Instruments, Equipment, and Supplies
Colloquial Information
G9348 TORQUE TOOL,SOCKET WRENCH
H5417 HANDLE,SOCKET WRENCH,TORQUE INDICATING
J1285 SCREWDRIVER,TORQUE,2-30 IN. LBS. RANGE
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS
KNOWN.
Enter the item name code.
(NAMED17611*)
MATTDMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF
WHICH THE ITEM IS FABRICATED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable
Reply Code from Table 2
(MATT2ADDAL5086*;MATT2ADDAL5086$DST0146*;MATT2ADDAL5086$
$DST0146*)
Table 1
ISAC Field Indicator (0184) Location
2AA DRIVE SURFACE
2AB HANDLE
2AC LUG
2AD OVERALL
2AE PIN
2AF WRENCHING SURFACE
Table 2
Reply Code (MA01) Reply
ALA000 ALUMINUM
ALB000 ALUMINUM ALLOY
AL2011 ALUMINUM ALLOY 2011
AL0034 ALUMINUM ALLOY 208.0

AL0002 ALUMINUM ALLOY A356.0
AL0033 ALUMINUM ALLOY B443.0
AL0060 ALUMINUM ALLOY C355.0
AL0024 ALUMINUM ALLOY D712.0
GFB000 BAKELITE-GRAPHITE
CNA000 CARBON
CRA000 CHROMIUM
CUA000 COPPER
CUB000 COPPER ALLOY

CU0069 COPPER ALLOY 172

FBA000 FIBER
FEA000 IRON
LRA000 LEATHER
MNA000 MANGANESE
MBA000 MOLYBDENUM
NLA000 NICKEL
NLB000 NICKEL ALLOY

PCA000 PLASTIC
PCAN00 PLASTIC CELLULOSE ACETATE
PCBN00 PLASTIC CELLULOSE ACETATE BUTYRATE
PCP000 PLASTIC POLYAMIDE
RCE000 RUBBER
RC0007 RUBBER CHLOROPRENE CLASS CR
RCAC00 RUBBER NEOPRENE
STA000 STEEL
ST1006 STEEL COMP 1006





ST0079 STEEL COMP 303SE
ST0080 STEEL COMP 304L
ST0460 STEEL COMP 3130H
ST0082 STEEL COMP 316L


ST0105 STEEL COMP 440A
ST0106 STEEL COMP 440B
ST0107 STEEL COMP 440C

ST0397 STEEL COMP A10

ST0014 STEEL COMP B1111
ST0398 STEEL COMP D1
ST0028 STEEL COMP E4340
ST0037 STEEL COMP F1
ST0406 STEEL COMP H10

ST0425 STEEL COMP L1
ST0046 STEEL COMP MT1010

ST0049 STEEL COMP MTX1015
ST0050 STEEL COMP MTX1020
ST0291 STEEL COMP O1
ST0435 STEEL COMP S1
ST0296 STEEL COMP W108

STB000 STEEL CORROSION RESISTING
TTA000 TITANIUM ALLOY
VNA000 VANADIUM
VNB000 VANADIUM ALLOY
WDC000 WOOD
ZNB000 ZINC
MDCL*JMATERIAL DOCUMENT AND CLASSIFICATION

THE SPECIFICATION, STANDARD, OR MANUFACTURER'S REFERENCE AND
THE CLASSIFICATION DESIGNATION, SUCH AS CLASS, CONDITION, TEMPER,
AND THE LIKE, THAT IDENTIFIES THE MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric
reply with a minimum of one character as in the first, second, and third examples. If ISAC
coding is authorized for this requirement, enter the applicable ISAC from Table 1 below
followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed
by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth
examples.
(MDCLJEATEXT1234*;MDCLJEATEXT1234$
$JEATEXT1234*;MDCLJEATEXT1234$JEATEXT1234*;MDCL1BJEATEXT1234*;M
DCL1BJEATEXT1234$$JEATEXT1234*;MDCL1BJEATEXT1234$JEATEXT1234*)
Table 1
2AA DRIVE SURFACE
2AB HANDLE
2AC LUG
2AD OVERALL
2AE PIN
Table 2
Reply Code (AP33) Reply
J AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
G ASSN STD
K DEF STAN/SPEC
B FED SPEC
C FED STD
L GOVERNMENT STD/SPEC
N INTERNATIONAL STD/SPEC
F MFR REF
D MIL SPEC
E MIL STD
H NATIONAL SPEC
P NATIONAL STD
M NATIONAL STD/SPEC
Table 3
M 10TH MATERIAL RESPONSE
N 11TH MATERIAL RESPONSE
P 12TH MATERIAL RESPONSE
Q 13TH MATERIAL RESPONSE
R 14TH MATERIAL RESPONSE
S 15TH MATERIAL RESPONSE
T 16TH MATERIAL RESPONSE
U 17TH MATERIAL RESPONSE
W 18TH MATERIAL RESPONSE
X 19TH MATERIAL RESPONSE
B 1ST MATERIAL RESPONSE
Y 20TH MATERIAL RESPONSE
Z 21ST MATERIAL RESPONSE
V 22ND MATERIAL RESPONSE
C 2ND MATERIAL RESPONSE
D 3RD MATERIAL RESPONSE
E 4TH MATERIAL RESPONSE
F 5TH MATERIAL RESPONSE
H 6TH MATERIAL RESPONSE
J 7TH MATERIAL RESPONSE
K 8TH MATERIAL RESPONSE
L 9TH MATERIAL RESPONSE
G ALL MATERIAL RESPONSES
A SINGLE MATERIAL RESPONSE
SFTT*DSURFACE TREATMENT
THE METALLIC,NONMETALLIC,AND/OR CHEMICAL PROPERTIES WITH
WHICH THE ITEM IS PLATED,DIPPED,AND/OR COATED.THE TREATMENT IS
DESIGNED TO PROTECT THE SURFACE(S) AND CANNOT BE WIPED OFF.
(SFTT2ACDXXA000*;SFTT2ACDXXA000$DCMB000*;SFTT2ACDXXA000$
$DCMB000*)
Table 1
2AA DRIVE SURFACE
2AB HANDLE
2AC LUG
2AD OVERALL
2AE PIN
Table 2
Reply Code (SF01) Reply
ANA000 ANODIZE
CDA000 CADMIUM
CMA000 CHROMATE
CMB000 CHROMATE ZINC
CRA000 CHROMIUM
CUA000 COPPER
DCA000 DICHROMATE
ENA000 ENAMEL
MTE000 GUNMETAL
LQA000 LACQUER
LCB000 LUBRICANT
NLA000 NICKEL
XXB000 OXIDE
XXA000 OXIDE FILM
PNA000 PAINT
PNG000 PAINT LUSTERLESS
PSA000 PASSIVATE
PHA000 PHOSPHATE
PCA000 PLASTIC
PRA000 PRIMER
SNA000 TIN
VAA000 VARNISH
ZNA000 ZINC
STDC*JSURFACE TREATMENT DOCUMENT AND CLASSIFICATION

THE SPECIFICATION,STANDARD,OR MANUFACTURERS REFERENCE,AND THE
CLASSIFICATION DESIGNATION,SUCH AS TYPE,CLASS,GRADE,AND THE
LIKE,THAT IDENTIFIES THE SURFACE TREATMENT MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric
reply with a minimum of one character as in the first, second, and third examples. If ISAC
coding is authorized for this requirement, enter the applicable ISAC from Table 1 below
followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed
by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth
examples.
(STDCJEGTEXT1234*;STDCJEGTEXT1234$
$JEGTEXT1234*;STDCJEGTEXT1234$JEGTEXT1234*;
STDC1BJEGTEXT1234*;STDC1BJEGTEXT1234$
$JEGTEXT1234*;STDC1BJEGTEXT1234$JEGTEXT1234*)
Table 1
2AA DRIVE SURFACE
2AB HANDLE
2AC LUG
2AD OVERALL
2AE PIN
Table 2
G ASSN STD
A COMMERCIAL ITEM DESCRIPTION
K DEF STAN/SPEC
B FED SPEC
C FED STD
L GOVERNMENT STD/SPEC
N INTERNATIONAL STD/SPEC
F MFR REF
D MIL SPEC
E MIL STD
H NATIONAL SPEC
P NATIONAL STD
M NATIONAL STD/SPEC
Table 3
M 10TH TREATMENT RESPONSE
N 11TH TREATMENT RESPONSE
P 12TH TREATMENT RESPONSE
Q 13TH TREATMENT RESPONSE
R 14TH TREATMENT RESPONSE
S 15TH TREATMENT RESPONSE
B 1ST TREATMENT RESPONSE
C 2ND TREATMENT RESPONSE
D 3RD TREATMENT RESPONSE
E 4TH TREATMENT RESPONSE
F 5TH TREATMENT RESPONSE
H 6TH TREATMENT RESPONSE
J 7TH TREATMENT RESPONSE
K 8TH TREATMENT RESPONSE
L 9TH TREATMENT RESPONSE
G ALL TREATMENT RESPONSES
A SINGLE TREATMENT RESPONSE
IF STYLE/REPLY CODE(s) 842, 843, 845, 846, 847, 848, 849, 850, 851, 852, 853, 854,
855, 856, 857, 858, 861 OR 862 WERE ENTERED FOR MRC STYL, YOU MUST
ANSWER MRC (ABHP)
STYLLSTYLE DESIGNATOR
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST
NEARLY CORRESPONDS TO THE APPEARANCE OF THE ITEM.
Review the representative drawings below, find the drawing which best represents your
item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which
are applicable to your drawing.Enter the applicable reply code from the table below.
(STYLL858)
Table 1
Physical Reply Code (STYL) Reply
Drawing
ID
AO10399 842 DEFLECTING FRAME END DRIVE
AO10403 847 DEFLECTING FRAME CENTER DRIVE
AO10404 848 RIGID FRAME END DRIVE
AO10410 854 RIGID FRAME CENTER DRIVE W/DETACHABLE ARMS
AO10411 855 RIGID FRAME T-HANDLE
AO10412 856 RIGID FRAME T-HANDLE
AO10413 857 MICROMETER END DRIVE
AO10414 858 MICROMETER END DRIVE
AO10417 861 MICROMETER END DRIVE, W/SQUARE LOCATION FOR
AO10418 862 DEFLECTING FRAME END DRIVE, W/SQUARE LOCATIO
Drawings
ABHP*JOVERALL LENGTH
THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH
TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply
with a minimum of one digit, a decimal and a minimum of one digit.
(ABHPJAA2.0*;ABHPJAA2.0$$JAA2.1*)
Table 1
Reply Code (AA05) Reply
A INCHES
L MILLIMETERS
Table 2
Reply Code (AC20) Reply
A NOMINAL
B MINIMUM
C MAXIMUM
ATNCJDRIVE SURFACE SIZE
A NUMERIC VALUE WHICH INDICATES THE SIZE OF THE DRIVE SURFACE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable
Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one
digit, a decimal and a minimum of one digit.
(ATNC1DJAC2.0*;ATNC1DJAC2.0$$JAC2.1*)
Table 1
1A SINGLE END
1B FIRST END
1C SECOND END
1D BOTH ENDS
1E THIRD END
1F FOURTH END
1G BODY CENTER
1H FIFTH END
1J SIXTH END
Table 2
A INCHES
L MILLIMETERS
Table 3
A NOMINAL
B MINIMUM
C MAXIMUM
CTCTDDRIVE END SHAPE
THE PHYSICAL CONFIGURATION OF THE DRIVE END.
(CTCT2FBDSPT)
Table 1
2AA SINGLE END EXTERNAL
2AB SINGLE END INTERNAL
2BA FIRST END EXTERNAL
2BB FIRST END INTERNAL
2CA SECOND END EXTERNAL
2CB SECOND END INTERNAL
2DA BOTH ENDS EXTERNAL
2DB BOTH ENDS INTERNAL
2EA THIRD END EXTERNAL
2EB THIRD END INTERNAL
2FA FOURTH END EXTERNAL
2FB FOURTH END INTERNAL
2GA BODY CENTER EXTERNAL
2GB BODY CENTER INTERNAL
Table 2
TPT 10 POINT
TWP 12 POINT
SPT 16 POINT
ATP 18 POINT
TFP 24 POINT
XPT 6 POINT
XPS 6 POINT STAR
APT 8 POINT
AAF CLUTCH
DVT DOVETAIL
FLT FLAT
AAE FLAT (SLOTTED)
AAB FOUR-SPLINE
HEX HEXAGON
AAG HIGH TORQUE
CAA OVAL
PGN PENTAGON
AAH PHILLIPS (CROSS)
AAJ POZIDRIVE
REC RECTANGULAR
RND ROUND
AAC SIX SPLINE
SPL SPLINE
SQR SQUARE
STR STRAIGHT
AAD TORQUE SET
TLR TRIANGULAR
AAA TRI-WING
CQFM*JHARDNESS RATING
A NUMERIC VALUE THAT REFLECTS THE HARDNESS OF AN ITEM WHEN
USED IN CONJUNCTION WITH A HARDNESS RATING SCALE.
(CQFMJSCB2.0*;CQFMJSCB2.0$$JSCB2.1*)
Table 1
BS BRINELL STANDARD
RC ROCKWELL C
SC SHORE SCLEROSCOPE
VF VICKERS OR FIRTH DIAMOND PYRAMID
Table 2
A NOMINAL
B MINIMUM
C MAXIMUM
AJCGJTORQUE CAPACITY
AN INDICATION OF THE UNIT OF MEASURE AND THE NUMERIC TORQUE
LIMIT FOR WHICH THE ITEM IS DESIGNED.
(AJCGJAC2.0*;AJCGJAC2.0$$JAC2.1*)
Table 1
D CENTIMETER-GRAMS
K CENTIMETER-KILOGRAMS
F FOOT-POUNDS
R INCH-GRAMS
A INCH-OUNCES
G INCH-POUNDS
S METER-KILOGRAMS
N METER-NEWTON
Table 2
A NOMINAL
B MINIMUM
C MAXIMUM
AJCFDTORQUE INDICATING MECHANISM
THE MEANS PROVIDED FOR SETTING THE APPLIED TORQUE.
Enter the applicable reply code from the table below
(AJCFDAP*;AJCFDFY$$DFX*)
Table 1
Reply Code (AH83) Reply
AN DIAL
CW MICROMETER
AP PLATE
CU PLATE WITH POINTER
AR PRESET
FX PRESET-ADJUSTABLE
FY PRESET-FIXED
AJDRDTORQUE SIGNAL METHOD
THE MEANS /AUDIBLE,VISUAL,AND THE LIKE/ USED TO SIGNIFY THAT THE
TORQUE IS FUNCTIONING.
(AJDRDAE*;AJDRDAF$DAC*;AJDRDAF$$DAC*)
Table 1
Reply Code (AD51) Reply
AE AUDIBLE
AC DIAL INDICATOR
AF FEEL IMPULSE
AG VISUAL
AJCH*JTORQUE SCALE GRADUATION
THE TORQUE SCALE DIVISIONS ON VISUAL INDICATING ITEMS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a
minimum of one digit, a decimal and a minimum of one digit.
(AJCHJD2.0*)
Table 1
D CENTIMETER-GRAMS
K CENTIMETER-KILOGRAMS
F FOOT-POUNDS
R INCH-GRAMS
A INCH-OUNCES
G INCH-POUNDS
S METER-KILOGRAMS
N METER-NEWTON
AFJH*GFURNISHED ITEMS
ITEMS FURNISHED AS ACCESSORIES WHICH ARE NOT SPECIFIED
ELSEWHERE.
Enter clear text.
(AFJHGCLEARTEXT)
IF STYLE/REPLY CODE(s) BKR WERE ENTERED FOR MRC CBBL, YOU MUST
ANSWER MRC (ABXZ)
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED
FOR PROPER FUNCTIONING OF THE ITEM.
(CBBLDDBY*;CBBLDBKW$$DAHJ*)
Table 1
Reply Code (AN47) Reply
ABC CABLE CLAMP
BKR ELECTRICALLY INSULATED
DQG MAGNETIC
BKT MANUAL INDICATOR
BKS MANUAL TOOL
BKW NONMAGNETIC
BKX NONREVERSIBLE RATCHET
AHJ NONSPARKING
ETN OFF THE POINT WRENCHING
BKY POWER TOOL
BKZ REMOVABLE ARM
BLA REMOVABLE HANDLE
BLB REPLACEABLE WRENCHING FEATURE
BLC REVERSIBLE RATCHET
BLD WIRE CUTTING FEATURE
DBY WRENCHING FACILITY
ABXZ*JDIELECTRIC WITHSTANDING VOLTAGE RATING
THE MAXIMUM VOLTAGE IN VOLTS,MULTIPLES OR SUBMULTIPLES OF
VOLTS,WHICH THE INSULATING MATERIALS OF THE ITEM WILL WITHSTAND
WITHOUT RESULTING IN DISRUPTIVE DISCHARGE OR DETERIORATION.
(ABXZJK2.0*)
Table 1
Reply Code (AB63) Reply
K KILOVOLTS
V VOLTS
MARK*GSPECIAL MARKINGS
MARKINGS INCLUDED ON AN ITEM FOR THE PURPOSE OF OFFERING
INSTRUCTIONS OR WARNINGS OR TO INDICATE THE PURPOSE,FUNCTION,OR
APPLICATION OF THE ITEM.EXCLUDES MANUFACTURERS PART
NUMBERS,SYMBOLS,OR THE LIKE.
Enter clear text.
(MARKGCLEARTEXT)
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM
NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE
DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE
OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE;
DISPOSABLE*)
ENAC*DENVIRONMENTAL ATTRIBUTE CODE
INDICATES THE TYPE OF PRODUCT THAT MEETS OR EXCEEDS THE
GOVERNMENT GUIDELINES FOR ENVIRONMENTALLY PREFERRED
CHARACTERISTICS.
(ENACDNZ*;ENACDNR$$DNR*)
Table 1
Reply Code (EN02) Reply
NZ PLASTICS REMOVAL IN THE MARINE ENVIRONMENT (PRIME) P
NR REVIEWED - DOES NOT MEET SOME ENAC CRITERIA
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT
SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST
CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES
ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED
BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE
COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY
CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE
Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*;
TESTJAA2345-654321$JB55566-663654*)
Table 1
A SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, B
DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL C
TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON
REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS
B STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDAR
C DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH A
MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICAT
REFERENCED IN A BASIC GOVERNING DRAWING)
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS,OR ENVIRONMENTAL AND PERFORMANCE
REQUIREMENTS THAT ARE DIFFERENT,MORE CRITICAL,OR MORE SPECIFIC
THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD
WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and
Government Entity (CAGE) Code of the entity controlling the document, a dash, and the
document designator. The agency that controls the limited coordination document must be
preceded and followed by a slash following the designator. The word canceled or
superseded must be preceded and followed by a slash for the designator. Professional and
industrial association specifications/standards are differentiated from a manufacturer's
specification in that the data has been coordinated and published by the professional and
industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180
REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZ
ZKJT81337-30642B$$JP80205-NAS1103*)
Table 1
S GOVERNMENT SPECIFICATION
T GOVERNMENT STANDARD
D MANUFACTURERS SOURCE CONTROL
R MANUFACTURERS SPECIFICATION
N MANUFACTURERS SPECIFICATION CONTROL
M MANUFACTURERS STANDARD
B NATIONAL STD/SPEC
A PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION
P PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC
ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER,LETTER,OR SYMBOL THAT INDICATES THE
TYPE,STYLE,GRADE,CLASS,AND THE LIKE,OF AN ITEM IN A
NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the approproiate
number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
Table 1
Reply Code (AD08) Reply
AL ALLOY
BE ANNEALED
AN ANNEX
AP APPENDIX
AC APPLICABILITY CLASS
AR ARRANGEMENT
AS ASSEMBLY
AB ASSORTMENT
BF BOND
BX BOX
CY CAPACITY
CA CASE
CT CATEGORY
CF CIRCUMFERENCE
CL CLASS
CE CODE
CR COLOR
CC COMBINATION CODE
CN COMPONENT
CP COMPOSITION
CM COMPOUND
CD CONDITION
AV CONFIGURATION
CS CONSTRUCTION
BG CORE CONDITION
CB CUT OFF
AM DELAY CLASS
DE DESIGN
DG DESIGNATOR
DW DRAWING NUMBER
DU DUPLEX
EG EDGE
EN END
FY FAMILY
FG FIGURE
AK FILE NUMBER
FN FINISH
FB FLAVOR
BH FLUX PERCENTAGE
FM FORM
FA FORMULA
GR GRADE
GA GRADUATION
AX GRANULES
AY GRIT
GB GROUND
GP GROUP
HA HEAVY DUTY
BA IMAGE COLOR
NS INSERT
TM ITEM
KD KIND
KT KIT
LG LENGTH
LV LEVEL
LT LIMIT
MK MARK
AA MARKER
AD MASK APERTURE
ML MATERIAL
BB MAXIMUM DENSITY
TA MEDIUM TEMPER
MH MESH
ME METHOD
BC MINIMUM DENSITY
MD MODEL
MT MOUNTING
AQ NATURAL
AU NON-DELAY CLASS
NR NUMBER
BL OUTFIT NUMBER
PA PARAGRAPH
PT PART
PN PATTERN
PC PHYSICAL CONDITION
PS PIECE
PL PLAN
PR POINT
PD POLISHED
PB PRESSURE RATING
QA QUALITY
QB QUENCHED
RN RANGE
AE RAPID
RT RATING
RF REFERENCE NUMBER
RA REGULAR DUTY
BJ RMA FLUX
SJ SALIENT CHARACTERISTICS
SC SCHEDULE
SB SECTION
SL SELECTION
BD SERIALIZED
SE SERIES
SV SERVICE
SX SET
SA SHADE
SH SHAPE
SG SHEET
SZ SIZE
AG SLOW
TC SOFT TEMPER
SK SOURCE
PZ SPECIES
SQ SPECIFICATION SHEET
SD SPEED
AW STANDARD
SR STRAIGHT
ST STYLE
SS SUBCLASS
SF SUBFORM
SP SUBTYPE
BK SUPPORT
SN SURFACE CONDITION
SY SYMBOL
SM SYSTEM
TB TABLE
TN TANNAGE
TP TEMPER
TX TEXTURE
TK THICKNESS
TT TREATMENT
TR TRIM
TY TYPE
YN UNIT
AZ UNSERIALIZED
VA VARIETY
WT WEIGHT
WD WIDTH
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC/S/ OF AN ITEM OF
SUPPLY WHICH DEPART/S/ FROM THE TEXT OF A SPECIFICATION OR A
STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS
STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL,OR A
VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS,OR AN
ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR
STANDARD.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE
DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD,EXCEPT IN
REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING
CHARACTERISTICS.
(ZZZXGAS MODIFIED BY MATERIAL*)
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY
RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item
being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE
TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR
OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the
item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE
DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED
ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY
AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT
WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked
proprietary on the technical data, using and coding ($) for multiple characteristics. If all the
MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the
reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and
Government Entity (CAGE) Code unless there is more than one extra long reference
number on the NSN.If there is more than one extra long reference number on the NSN,
include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., 28480 ANN112036BIL060557LEN313605UZ62365 & S1234
NN112036BIL060557LEN313605UZ62365).
In determining quantity of characters in the reference number, count will be made after
modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD
4100.39-M.
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
Table 1
A ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD
PKWT*JUNPACKAGED UNIT WEIGHT
THE MEASURED WEIGHT OF AN ITEM UNENCUMBERED BY PACKAGING OR
PACKING MATERIAL. PLEASE USE MRC CTJS IN PLACE OF THIS CANCELED
MRC.
(PKWTJOZ2.0*)
Table 1
GM GRAMS
KG KILOGRAMS
OZ OUNCES
LB POUNDS
CBME*JCUBIC MEASURE
A MEASUREMENT OF VOLUME TAKEN BY MULTIPLYING THE LENGTH BY
THE WIDTH BY THE HEIGHT OF AN ITEM AND RENDERED IN CUBIC UNITS.
(CBMEJCN2.0*)
Table 1
CC CUBIC CENTIMETERS
CN CUBIC INCHES
BGTB*HSTORAGE FACILITY
THE STORAGE FACILITY STANDARDS ESTABLISHED TO ASSURE THE
SERVICEABILITY OF SUPPLIES IN STORAGE.
Enter the applicable Reply Code from Tables 1 & 2 & 3 below.
(BGTBHDAGAC*)
Table 1
D ALTERNATE
B MANDATORY
C PREFERRED
Table 2
Reply Code (AM81) Reply
AB ABOVE GROUND MAGAZINE
AT DOCK LEVEL HEATED WAREHOUSE
AX DOCK LEVEL UNHEATED WAREHOUSE
AS GROUND LEVEL HEATED WAREHOUSE
AW GROUND LEVEL UNHEATED WAREHOUSE
AF IGLOO MAGAZINE
AG IMPROVED OPEN
AR SHED
AK UNIMPROVED OPEN
Table 3
AF CHILL
AC CONTROLLED HUMIDITY
AJ CORROSION
AD FLAMMABLE
AG FREEZE
AB GENERAL PURPOSE
AH HEAVY DUTY
AE SECURITY
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF
THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION,
MODEL 12, TYPE A*)
PRMT*DPRECIOUS MATERIAL
IDENTIFICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM.
(PRMTDAGA000*;PRMTDIRA000$DRHA000*;PRMTDIRA000$$DRHA000*)
Table 1
AUA000 GOLD
IRA000 IRIDIUM
AZA000 OSMIUM
PDA000 PALLADIUM
PTA000 PLATINUM
RHA000 RHODIUM
RTA000 RUTHENIUM
AGA000 SILVER
PMWT*JPRECIOUS MATERIAL AND WEIGHT
AN INDICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM,AND
THE AMOUNT PER A MEASUREMENT SCALE.
(PMWTJAGA000E2.0*;PMWTJAGA000E2.0$$JAGA000E2.1*)
Table 1
AUA000 GOLD
IRA000 IRIDIUM
AZA000 OSMIUM
PDA000 PALLADIUM
PTA000 PLATINUM
RHA000 RHODIUM
RTA000 RUTHENIUM
AGA000 SILVER
Table 2
Reply Code (AG14) Reply
E GRAINS, TROY
R GRAMS
F OUNCES, TROY
PMLC*JPRECIOUS MATERIAL AND LOCATION
AN INDICATION OF THE PRECIOUS MATERIAL AND ITS LOCATION IN THE
ITEM.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply
with a minimum of one character.
(PMLCJRTA0002.0*;PMLCJRTA0002.0$JRTA0002.0*;PMLCJRTA0002.0$
$JRTA0002.1*)
Table 1
AUA000 GOLD
IRA000 IRIDIUM
AZA000 OSMIUM
PDA000 PALLADIUM
PTA000 PLATINUM
RHA000 RHODIUM
RTA000 RUTHENIUM
AGA000 SILVER
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM,NOT COVERED IN ANY OTHER
REQUIREMENT,WHICH ARE CONSIDERED ESSENTIAL INFORMATION FOR
ONE OR MORE FUNCTIONS EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT*
SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT;
BLADE TIEDOWN*)
FCLS*AFUNCTIONAL CLASSIFICATION
THE ALPHA-NUMERIC DESIGNATION THAT IDENTIFIES THE CLASSIFICATION
OF THE ITEM ACCORDING TO THE CATEGORY OF FUNCTIONS PERFORMED.
Enter the alpha-numeric reply with a minimum of one character.
(FCLSAR6)
FTLD*GFUNCTIONAL DESCRIPTION
DESCRIBES THE CAPABILITIES,INTENDED USE,AND/OR PURPOSE FOR WHICH
THE ITEM IS PROVIDED.
Enter the reply from the applicable document.
(FTLDGUSED TO INSTALL/REMOVE ENGINE NACELLE*)
TMDN*ATYPE/MODEL DESIGNATION
THE ALPHA-NUMERIC-ALPHA DESIGNATION USED TO IDENTIFY THE TYPE
AND/OR MODEL OF THE BASIC ITEM.
(TMDNAA5)
RTSE*GRELATIONSHIP TO SIMILAR EQUIPMENT
INDICATES THE RELATIONSHIP,SUCH AS CONSTRUCTION,CAPABILITIES,AND
THE LIKE,OF THE ITEM TO A SIMILAR ITEM.
Enter concise statement for similar item including name and identifying data.
(RTSEGSIMILAR TO LOCKHEED OVERWING ENGINE HOIST P/N 61521-58*)
RDAL*GREFERENCE DATA AND LITERATURE
LITERATURE AND REFERENCES AVAILABLE FOR INFORMATION PERTAINING
TO THE ITEM.
Enter data appropriate and in a concise manner to identify informational references
covering the item.
(RDALGNAAVAIROIA/VFK58 A-2.2.9*)
NTRD*AENTRY DATE
INDICATES THE DATE THE ITEM WAS ENTERED INTO MIL-HDBK-300.
Enter the date structured in three hyphenated 2 position segments to indicate the last 2
digits of the calendar year, month, and day.
(NTRDA80-05-28*)
ZZZP*JPURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED
IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the 5-position Commercial and Government Entity (CAGE) code, followed by a dash
and the identifying number of the document.
(ZZZPJ81A37-30624A*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS
/FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER
CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
PKQT*AINTERMEDIATE PACKAGE QUANTITY
THE NUMBER OF WRAPS,BOXES,OR BUNDLES,WHICH CONTAINS TWO OR
MORE UNITS OF ISSUE,PLACED INSIDE AN EXTERIOR CONTAINER.
Enter the numeric reply with a minimum of one digit.
(PKQTA10*)
EXQT*AEXTERIOR CONTAINER QUANTITY
THE NUMBER OF UNITS OF ISSUE PLACED INSIDE THE EXTERIOR
CONTAINER. PLEASE USE MRC NMBR WITH ISAC CODING OF OUTER
CONTAINER IN PLACE OF THIS CANCELED MRC.
Enter the numeric reply with a minimum of one digit.
(EXQTA10*)
SUWT*JUNIT OF ISSUE WEIGHT
THE MEASURED WEIGHT OF THE ACTUAL CONTAINER(S) OR SUPPORTING
DEVICE(S) WHICH IS IN DIRECT CONTACT WITH THE ITEM AND ITS
CONTENTS.
(SUWTJLB2.0*)
Table 1
KG KILOGRAMS
LB POUNDS
ECWT*JEXTERIOR CONTAINER WEIGHT
THE MEASURED WEIGHT OF THE EXTERIOR CONTAINER. PLEASE USE MRC
AJWK WITH ISAC CODING OF OUTER CONTAINER IN PLACE OF THIS
CANCELED MRC.
(ECWTJLB2.0*)
Table 1
KG KILOGRAMS
LB POUNDS
SUCB*JUNIT OF ISSUE CUBE
THE WIDTH BY THE HEIGHT OF THE UNIT OF ISSUE AND RENDERED IN
CUBIC UNITS.
(SUCBJCM2.0*)
Table 1
CF CUBIC FEET
CM CUBIC METERS
EXME*JEXTERIOR CONTAINER CUBIC MEASURE
THE WIDTH BY THE HEIGHT OF THE EXTERIOR CONTAINER AND RENDERED
IN CUBIC UNITS.
(EXMEJCM2.0*)
Table 1
CF CUBIC FEET
CM CUBIC METERS
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR
COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
HZRD*DHAZARDOUS SUBSTANCES
THE SUBSTANCES AND/OR MATERIALS CONTAINED IN THE ITEM THAT
HAVE BEEN IDENTIFIED AS HAZARDOUS OR ENVIRONMENTALLY
DAMAGING BY THE ENVIRONMENTAL PROTECTION AGENCY OR OTHER
AUTHORIZED GOVERNMENT AGENCY.
(HZRDDHAZ011)
Table 1
Reply Code (HZ00) Reply
HAZ011 CHROMIUM
SHPN*ADOT PROPER SHIPPING NAME
THE PROPER SHIPPING NAME AS IDENTIFIED BY THE DEPARTMENT OF
TRANSPORTATION (DOT) AND LISTED IN THE TITLE 49 CODE OF FEDERAL
REGULATIONS (CFR), PART 172, HAZARDOUS MATERIALS TABLE.
(SHPNAP0)
DENN*ADOT IDENTIFICATION NUMBER
THE IDENTIFICATION NUMBER ASSIGNED BY THE DEPARTMENT OF
TRANSPORTATION (DOT) TO EACH PROPER SHIPPING NAME.
IDENTIFICATION NUMBERS PRECEDED BY THE LETTERS "UN" ARE
ASSOCIATED WITH INTERNATIONAL AS WELL AS DOMESTIC
TRANSPORTATION AND THOSE PRECEDED BY THE LETTERS "NA" ARE NOT
RECOGNIZED FOR INTERNATIONAL TRANSPORTATION OF HAZARDOUS
MATERIALS (DANGEROUS GOODS) EXCEPT TO AND FROM THE UNITED
STATES AND CANADA.
(DENNAV4)
WLBL*ADOT WARNING LABEL CODE
THE WARNING LABEL CODE ASSIGNED BY THE DEPARTMENT OF
TRANSPORTATION (DOT) TO EACH PACKAGE OR CONTAINMENT DEVICE
OFFERED FOR TRANSPORTATION OF A HAZARDOUS MATERIAL WHICH
MEETS ONE OR MORE HAZARD CLASS DEFINITIONS IN ACCORDANCE WITH
THE TITLE 49 CODE OF FEDERAL REGULATIONS (CFR), PART 172,
HAZARDOUS MATERIALS TABLE. CANCLED WITH NO REPLACEMENT - THIS
INFORMATION IS NOT CHARACTERISTIC INFORMATION, THIS INFORMATION
NEEDS TO BE INPUT IN SEG G OF THE TIR
(WLBLAX1)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
(CLQLGWOVEN WIRE CLOTH*)

TORQUIMETRO TECH3XDM250(1)

Uploaded by

Document Informationclick to expand document information

Document Informationclick to expand document information

Copyright:

Available Formats

TORQUIMETRO TECH3XDM250(1)

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

TORQUIMETRO TECH3XDM250(1)

Uploaded by

Copyright:

Available Formats

N/PARTE: TECH3XDM250

ALB000 ALUMINUM ALLOY

AL2011 ALUMINUM ALLOY 2011

AL2017 ALUMINUM ALLOY 2017

AL2024 ALUMINUM ALLOY 2024

AL0034 ALUMINUM ALLOY 208.0

AL0038 ALUMINUM ALLOY 222.0

AL0039 ALUMINUM ALLOY 242.0

AL0025 ALUMINUM ALLOY 295.0

AL3003 ALUMINUM ALLOY 3003

AL0035 ALUMINUM ALLOY 319.0

AL0036 ALUMINUM ALLOY 328.0

AL0045 ALUMINUM ALLOY 355.0

AL0046 ALUMINUM ALLOY 356.0

AL5083 ALUMINUM ALLOY 5083

AL5086 ALUMINUM ALLOY 5086

AL0026 ALUMINUM ALLOY 514.0

AL0043 ALUMINUM ALLOY 520.0

AL6061 ALUMINUM ALLOY 6061

AL0047 ALUMINUM ALLOY 705.0

AL0048 ALUMINUM ALLOY 707.0

AL7075 ALUMINUM ALLOY 7075

AL0049 ALUMINUM ALLOY 713.0

AL0771 ALUMINUM ALLOY 771.0

AL0850 ALUMINUM ALLOY 850.0

AL0002 ALUMINUM ALLOY A356.0

AL0042 ALUMINUM ALLOY A712.0

AL0061 ALUMINUM ALLOY A850.0

AL0033 ALUMINUM ALLOY B443.0

AL0041 ALUMINUM ALLOY B514.0

AL0062 ALUMINUM ALLOY B850.0

AL0060 ALUMINUM ALLOY C355.0

AL0024 ALUMINUM ALLOY D712.0

CUB000 COPPER ALLOY

CU0233 COPPER ALLOY 173

CU0074 COPPER ALLOY 230

CU0076 COPPER ALLOY 240

CU0079 COPPER ALLOY 260

CU0304 COPPER ALLOY 262

CU0080 COPPER ALLOY 268

CU0081 COPPER ALLOY 270

CU0272 COPPER ALLOY 272

CU0274 COPPER ALLOY 274

CU0302 COPPER ALLOY 280

CU0330 COPPER ALLOY 330

CU0305 COPPER ALLOY 331

CU0332 COPPER ALLOY 332

CU0335 COPPER ALLOY 335

CU0340 COPPER ALLOY 340

CU0088 COPPER ALLOY 342

CU0306 COPPER ALLOY 344

CU0307 COPPER ALLOY 345

CU0308 COPPER ALLOY 347

CU0309 COPPER ALLOY 348

CU0089 COPPER ALLOY 353

CU0090 COPPER ALLOY 356

CU0091 COPPER ALLOY 360

CU0370 COPPER ALLOY 370