Scribd
Upload
1 views

Assignment -V

Hs

Uploaded by

manassharma1307
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
1 views

Assignment -V

Hs

Uploaded by

manassharma1307
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Assignment-V (Section of Solid)

Subject-Engg. Graphics (BT-105)

1. 1. A hexagonal prism of base side 25 mm and axis 55 mm long is resting on H.P.


on one of its rectangular faces, with its Axis perpendicular to the V.P. It is cut by a
plane inclined at 40 degree to the VP and perpendicular to HP and is bisecting the
axis of the prism. Draw its top view, sectional front view and true shape of the
section.
2. A Square prism (25 mm base side × 60mm height) is kept on HP with its axis
vertical and two adjacent to VP. It is cut section plane whole V.T. makes an angle
of 30 degree with the reference line and bisect the axis. Draw sectional top view
and true shape of section.
3. A cone base 75 mm diameter and axis 80 mm long is resting on its base on HP. It
is cut by a section plane perpendicular to the VP and inclined at 45 degree to HP
and cutting axis at a point 35 mm from the apex. Draw its front view, section top
view and true shape of the section.
4. A pentagonal prism side of base 25 mm and axis 60 mm log, rest with one of the
edge of the its base on HP. Its axis is inclined at 30 degree to HP and parallel to VP
it is cut by a horizontal section plane passing through the highest corner of the
base. Draw the sectional top view.

You might also like