BHARATI VIDYAPEETH , DEEMED TO BE UNIVERSITY

SCHOOL OF DISTANCE EDUCATION, NEW DELHI

MCA Project guide list for Winter 2024 examination

Course &
Sr.No. PRN Student Name Student Email Id Guide Name Guide Contact Number Guide Email id
SEM
1 2428100017 GAGAN JHA
[email protected]
2 2428100007 MUNNU KUMAR SINGH
[email protected]
3 2428100006 NAVIN KUMAR Mca II Mr.Pankaj kumar 9582712120 [email protected]
[email protected]
4 2428100003 SHRI KUMAR SHARMA
[email protected]
5 2428100067 TUSHAR
[email protected]
Course &
Sr.No. PRN Student Name Student Email Id Guide Name Guide Contact Number Guide Email id
SEM
1 2328100229 SUNNY KUMAR [email protected]
Dr.Ajay Kumar
2 2328100314 RIYA [email protected]
Dr.Ajay Kumar
3 2328100332 CHETAN YADAV [email protected]
Dr.Ajay Kumar
4 2328100784 TANISH ANAND [email protected]
Dr.Ajay Kumar
5 2328100177 MOHIT CHAND [email protected]
Dr.Ajay Kumar
6 2328100178 NIKHIL [email protected]
Dr.Ajay Kumar
7 2328100222 TANHAVI SHIKHA [email protected]
Dr.Ajay Kumar
8 2328100224 YOGITA KAPOOR [email protected]
Dr.Ajay Kumar
9 2328100233 KARAN BHARDWAJ [email protected]
Dr.Ajay Kumar
MCA -III 9953007789 [email protected]
10 2328100241 NISHU [email protected]
Dr.Ajay Kumar
11 2328100252 AKSHAY KUMAR [email protected]
Dr.Ajay Kumar
12 2328100263 KASHISH GARG [email protected]
Dr.Ajay Kumar
13 2328100264 SIMRANJEET SINGH [email protected]
Dr.Ajay Kumar
14 2328100285 VIKAS GODARA [email protected]
Dr.Ajay Kumar
15 2328100304 NIKHIL VATS [email protected]
Dr.Ajay Kumar
16 2328100305 SHUBHAM [email protected]
Dr.Ajay Kumar
17 2328100306 ABHISHEK GUPTA [email protected]
Dr.Ajay Kumar
18 2328100317 JAYANSH GABA [email protected]
Dr.Ajay Kumar
19 2328100331 SARTHAK MEHTA [email protected]
Ms..Bhawna Jasuja
20 2328100339 BHAVIK KOCHHAR [email protected]
Ms..Bhawna Jasuja
21 2328100203 ANSHUL UPPAL [email protected]
Ms..Bhawna Jasuja
22 2328100230 TANISHQ ARORA [email protected]
Ms..Bhawna Jasuja
23 2328100286 MOHIT SIDANA [email protected]
Ms..Bhawna Jasuja
24 2328100296 KM NAVYA [email protected]
Ms..Bhawna Jasuja
SHRIVASTAVA MCA -III 9622755457 [email protected]
25 2328100297 JASKARAN SINGH SETHI [email protected]
Ms..Bhawna Jasuja
26 2328100310 VINAY KUMAR [email protected]
Ms..Bhawna Jasuja
27 2328100679 PRERNA [email protected]
Ms..Bhawna Jasuja
28 2228101109 KAPIL MANOCHA [email protected]
Ms..Bhawna Jasuja
29 2228101078 ANKIT KUMAR [email protected]
Ms..Bhawna Jasuja
30 2228101175 LAKSHAY SHARMA [email protected]
Ms..Bhawna Jasuja
Course &
Sr.No. PRN Student Name Student Email Id Guide Name Guide Contact Number Guide Email id
SEM
2228101079 SUPRITA NARULA
[email protected] Dr.Megha Sehgal
2 2228101083 ANJALI
[email protected] Dr.Megha Sehgal
3 2228101087 HARSHITA RAHEJA
[email protected] Dr.Megha Sehgal
4 2228101088 KM SWATI JATAV
[email protected] Dr.Megha Sehgal
5 2228101102 DHARMENDER KUMAR
[email protected] Dr.Megha Sehgal
6 2228101122 ABHISHEK DUBEY
[email protected] Dr.Megha Sehgal
7 2228101125 RAVINDER
[email protected] Dr.Megha Sehgal
[email protected]
8 2228101126 VIVEK KUMAR TIWARI 9654236872
[email protected] Dr.Megha Sehgal u

MCA IV
 [email protected]
9654236872
u
9 2228101143 SAURABH YADAV
[email protected] Dr.Megha Sehgal
10 2228101144 VIMAL SHARMA
[email protected] Dr.Megha Sehgal
11 2228101145 RAHUL GARG
[email protected] Dr.Megha Sehgal
12 2228101151 VIKAS TIWARI
[email protected] Dr.Megha Sehgal
13 2228101155 GARVIT NAGPAL
[email protected] Dr.Megha Sehgal
MCA IV
14 2228101162 VINOD
[email protected] Dr.Megha Sehgal
15 2228101163 SAHIL AGGARWAL
[email protected] Dr.Megha Sehgal
16 2228101172 BHARAT Dr.Nripesh Kumar Nrip
[email protected]
17 2228101179 ADITI SINGH Dr.Nripesh Kumar Nrip
[email protected]
18 2228101109 KAPIL MANOCHA Dr.Nripesh Kumar Nrip
[email protected]
19 2228101078 ANKIT KUMAR Dr.Nripesh Kumar Nrip
[email protected]
20 2228101175 LAKSHAY SHARMA Dr.Nripesh Kumar Nrip
[email protected]
21 2228101108 ISHITA SHARMA Dr.Nripesh Kumar Nrip 9405278721 [email protected]
[email protected]
22 2228100688 MANSI RAWAT Dr.Nripesh Kumar Nrip
[email protected]
23 2228100304 KRITI SHEJWALKAR Dr.Nripesh Kumar Nrip
[email protected]
24 2228100309 SHUBHAM SRIVASTAVA Dr.Nripesh Kumar Nrip
[email protected]
25 2228100370 ADITYA SHUKLA Dr.Nripesh Kumar Nrip
[email protected]
ABHISHEK KUMAR
26 2028100716 Dr.Nripesh Kumar Nrip
BHARDWAJ [email protected]

Note : 1) Students are requested to follow project guidelines given .

2) E-mail your project report to your respective guides for approval Last date of approval from guide is before 4th Dec 2024 .
Without guide approval no project wil be accepted.
3) The last date for final project submission is 7th Dec 2024 .
4) Submit your project report in Hard copy with proper certification Form .
5)Project will not be accepted in any other way i.e. Email, whatsapp etc .
Kindly ensure to submit hardcopy project only in the campus itself .
6) If any student name is not present in the list kindly contact Dr.Megha sehgal Coordinator MCA immediately .

Dr.Megha Sehgal Dr.A.R. Deshmukh

Academic coordinator
Director, CDOE, New Delhi
CDOE New Delhi
 Table of Contents
Before proceeding to Chapter – I following should get mentioned in the report:

 Student undertaking

 Certificate from Internal Guide

 Certificate from the Director

 Preface

 Acknowledgement

CHAPTER 1 INTRODUCTION

1.1 Introduction about Project

1.2 Need of Computerization of System

1.3 Proposed Software (What would s/w accomplish?)

1.4 Importance of the Work

CHAPTER 2 SYSTEM ANALYSIS

2.1
Feasibility Study of s/w includes its types

2.2
Analysis Methodology (Types)

2.3
Choice of Platforms s/w & h/w

2.3.1 Software used

2.3.2 Hardware used

 CHAPTER 3 SYSTEM DESIGN

3.1 Design methodology

3.2 Database Design

3.3 Screen Design

3.4 Report Design

(Include DFD/ERD/OOAD/ Screen Shots/ Reports & Data Base

Design)

CHAPTER 4 TESTING AND IMPLEMENTATION

4.1 Testing Methodology (Types)

4.2 Unit Testing
4.3 Module Testing
4.4 System Testing
4.5 Alpha/ Beta Testing
4.6 White Box Black Box Testing
4.7 Implementation
4.8 Post Implementation

CHAPTER 5 CONCLUSION AND REFERENCES

5.1 Conclusion

5.2 Limitation of System

5.3 Future Scope for Modification

5.4.1 H/W Requirement

5.4.2 S/W Requirement

5.5 References/ Bibliography

CHAPTER 6 ANNEXURES

A‐1 Menu Flow Diagram A‐2 Data DictionaryA‐3 Sample

Input

A‐4 Sample Output

OOAD (use case diagrams) if used this approach.

Typing Instructions and Project Performa for the courses
BCA and MCA projects
 Important Instructions:
Students are required to attach following documents in their
project hard copy
1. Guide’s certificate
2. Director’s Certificate (The both certificates on the college
letterhead will be provided from SDE office.)

To get the above certificates, students are required to bring with

them following papers:
1. Approval mail of project guide (Printed hard copy)
2. Company certificate photo copy
3. Summary format (format copy is available at photo copy
shop)

Student are also required to include student declaration,

Acknowledgment and Preface in the report
 For MCA and BCA students

1. Binding for MCA-I to MCA-III Total No. of copies: Two (Spiral bound) and
2. MCA-IV - One copy hard cover bound
3. The project should be hard cover bound in leather or Rexin with the following
color specification.
4. The Project Hardbound color for MCA, BCA ( Black Rexin with gold
Embossing).
5. Only Embossing will be accepted (Kindly do not get Screen Printing as it is
strictly not acceptable).
6. The Hard Bound should have Spine with the Course, Title and Academic year
embossed on it.
7. The order of the initial pages should be
Cover page
Certificate from the company (if any)
Certificates from the College
i) Guide Certificate of Originality of the project
ii) Director Certificate
Preface
Acknowledgement
Table of Contents / INDEX

NOTE: If your project title and guide are confirm, you can order your hard
bound so that it is ready by the time your printouts are ready which can save
you from time constraints.
 Title of Project

A Project Report
Submitted in partial fulfillment of the requirements for the
Award of degree (Name of the Course)

20XX – 20YY

Submitted by: Guided by:

(Student’s Name) (Internal Guide)

BHARATI VIDYAPEETH DEEMED UNIVERSITY SCHOOL OF DISTANCE EDUCATION

Academic Study Center - BVIMR, New Delhi An
ISO 9001:2008 Certified Institute
NAAC Accredited Grade “A” University
 Student Undertaking

Certificate of Originality

I (Name of Student) (Course and Sem) would like to declare that

the project report entitled “ (Title of your project) Submitted to Bharati
Vidyapeeth University Pune, School of Distance Education Pune, Academic Study Centre
BVIMR New Delhi in partial fulfillment of the requirement for the award of the degree.

It is an original work carried out by me under the guidance of (Name of Project

Guide).

All respected guides, faculty member and other sources have been properly acknowledged and
the report contains no plagiarism.

To the best of my knowledge and belief the matter embodied in this project is a genuine work
done by me and it has been neither submitted for assessment to the University nor to any other
University for the fulfillment of the requirement of the course of study.

Student Name with Signature

 Certificate from the Company/Organization

(On Company Letter head)

This is to certify that (Name of the student) son/daughter of (name of the father) pursuing
MBA from Bharati Vidyapeeth Deemed University School of distance education, New
Delhi has successfully completed Project Report in our organization on the topic titled,
“Title of the Project” from to 20XX. During his/ her Internship project

tenure in the organization/ company, we found him/ her hard working, sincere and diligent
person and his/ her behavior and conduct was good during the project. We wish him/her
all the best for his/ her future endeavors.

Comments of Guide

1.
2.
3.

Name and Signature of the Mentor (Corporate Mentor)

Designation
 REPORT FORMAT/ TYPING INSTRUCTIONS
Total No. of Copies need to be Submitted : One Original Typed (no photocopy)

C.D. : One
Paper Quality : Executive Bond, 100 gsm (thickness)
The size of the paper : A4
Border Indents

 Top : 1.0 Inch

 Bottom : 1.0 Inch
 Left : 1.5 Inch.
 Right : 1.0 Inch.

Page Numbering : Bottom centered

Font

 Type : Times New Roman/ Century Gothic only

 Color : Black Only
 Sizes : Uniform & Consistent throughout the report
Normal Text-12, Chapter Heading-16, Titles-14

Line Spacing : 1.5

Graphical Presentation : Colour/ Black & White

Printing : single sided

Paragraph format
 Vertical space between paragraphs should be of about 2.5 line spacing.
 A single lined of a paragraph should not be left at the top or bottom of a page

Chapter and Section format

Each chapter should begin on a fresh page. Chapter number and title of the Chapter,
subheading of the chapter should be printed at the center of the Page.

Sections and Sub-sections

A chapter can be divided into Sections, Sub-sections and Sub-Sub-sections so as to present
different concepts separately. Sections and sub-sections can be numbered using decimal points,
e.g., 2.2 for the second Section in Chapter 2 and 2.3.4 for the fourth Sub-section in third section
of Chapter 2. Chapters, Sections and Sub-Sections should be included in the Contents with page
numbers flushed to the right. Further subsections need not be numbered or included in the
contents.
Table/Figure Format
 Table and figures should be numbered chapter wise. For example, the fourth figure in
Chapter 5 should bear the number Figure 5.4 or Fig.5.4.
 Table number and title should be placed above the table. Reference for Table and Figures
reproduced from elsewhere should be cited in the last and separate line in the table and
figure caption, e.g. (after McGregor [12] ).( Source of Table)

Binding
The project should be hard cover bound in leather or rexin with the following colour
specification:

 Colour Black

 Lettering All lettering should be embossed in gold.

 Bound back

The degree, the name of the candidate and the year of submission should also be
embossed on the bound (side) in gold.

 Blank sheets

In addition to the white sheets (binding requirement) two white should be put at the
beginning and end of the Project.

List of Figures and Tables

Two separate lists of Figure caption and Table titles along with their numbers and
corresponding page numbers against them shall follow the Contents.
 Typing Sample Format

Top Margin 1
inch
Chapter Heading size -16
Titles size -14
below is the normat text size -12 Margin between lines 1.5 line
The Business establishment may be a Company, Industrial unit,
Wholesaler, Retailer, Distributor Office, Dealers, Company Showroom,
Company Office, Service Organizations, Government Offices, NGO`s
etc. Students must read these guidelines carefully and clarify doubts, if
any, before proceeding for Summer Training Project.
Margin between paragraph 2 line
Left All the students enrolled for BCA Programme have to undergo
Margin compulsorily the SUMMER TRAINING for 50 working days in an Right
1.5 organization. The objective of this training is to test the ability of the Margin
inch students to work on any topic/problem related to any functional area. 1 inch
The problem/topic can also be assigned by the organization in which
the students undergo in-plant training in the absence of which students
is free to select any topic/problem as his/her own accord.
Margin between paragraph 2 line
Keeping in view the first year curriculum for giving exposure to different
functional areas and research methodology in BCA, the students have
to collect the data relevant to their topic or problem and analyze the
same methodologically, make intelligent observations and offer some
practical suggestions. In order to complete the task following Chapter
Scheme is suggested which can be adopted with or without
modifications.
Bottom Margin 1 inch Page No. 1
 REPORT FORMAT/ TYPING INSTRUCTIONS

***************************
A Project Report
Submitted in the partial fulfillment of the requirement for the award
of the Degree of
****************************
20**-20**

Submitted By: Under the Guidance of:

******************************

BHARATI VIDYAPEETH DEEMED UNIVERSITY SCHOOL OF

DISTANCE EDUCATION
Academic Study Center - BVIMR, New Delhi
An ISO 9001:2008 Certified Institute
Reaccredited Grade “A” University by NAAC

This is Spine
The spine of the book is an important aspect in Project design, especially in the cover design.
When the project are stacked up or stored in a shelf,
the spine is the only visible surface that contains the information about the book.