Scribd
Upload
10 views2 pages

Lecture15 Handout

Uploaded by

waleed ali
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
10 views2 pages

Lecture15 Handout

Uploaded by

waleed ali
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Lecture 15 - EE 359: Wireless Communications - Winter 2020

MIMO Fading Channel Capacity, Massive MIMO,


Beamforming, Diversity vs. Multiplexing, RX Design
Lecture Outline
• MIMO Fading Channel Capacity
• Massive MIMO
• Beamforming
• MIMO Diversity/Multiplexing Tradeoffs
• MIMO RX Design

1. MIMO Fading Channel Capacity


• In fading, capacity with both transmitter and receiver knowledge is the average of
the capacity for the static channel, with power allocated either by an instantaneous
or average power constraint. Under the instantaneous constraint power is optimally
allocated over the spatial dimension only. Under the average constraint it is allocated
over both space and time.
• In fading, if the channel is unknown at transmitter, uniform power allocation is optimal,
but this leads to an outage probability since the transmitter doesn’t know what rate
R to transmit at:
ρ
   
Pout = p H : B log2 det IMr + HHH < R .
Mt

2. Massive MIMO:
• When the number of TX (or RX) antennas is large, the channel becomes “static” due
to the law of large numbers. Specifically
1
lim HHH = IMr .
Mt →∞ Mt

• The MIMO channel capacity then becomes


ρ
 
lim B log2 det IMr + HHH = B log2 det [IMr + ρIMr ] = Mr B log2 (1 + ρ).
Mt →∞ Mt
• Defining M = min(Mt, Mr ), this implies that as Mt grows large, the MIMO channel
capacity in the absence of TX CSI approaches C = M B log2 (1 + ρ) for ρ the SNR, and
hence grows linearly in M . This is also true for finite Mt and Mr but at large SNR.

3. MIMO Systems: Beamforming


• Beamforming sends the same symbol over each transmit antenna with a different scale
factor.
• At the receiver, all received signals are coherently combined using a different scale
factor.
• This produces a transmit/receiver diversity system, whose SNR can be maximized by
optimizing the scale factors (MRC).
• Beamforming leads to a much higher SNR than on the individual channels in the
parallel channel decomposition.
• Thus, there is a design tradeoff in MIMO systems between capacity and diversity.
4. Diversity versus Multiplexing in MIMO Systems

• Can exchange data rate for probability of error.


• Define rate scale factor r = R/ log(SN R). Define diversity gain d = log)Pe )/ log(SN R)/.
• Can show (Zheng/Tse’02) that in high SNR regime, the optimal tradeoff is d∗ (r) =
(Mt − r)(Mr − r)..
• The optimal operating point on this traedeoff curve depends on the application.

5. MIMO Receiver Design (see supplemental notes)

• Optimal MIMO receiver is maximum-likelihood (ML) receiver. Finds input vector x


that minimizes |y − Hx|2F for | · |F the Frobenius (matrix) norm.
• This receiver is exponentially complex in the constellation size and number of trans-
mitted data streams.
• Can reduce complexity through linear processing of input vector Ax.
• Zero-forcing receiver forces all interference from other symbols to zero. This can result
in significant noise enhancement.
• MMSE receiver: trades off cancellation of interference from other symbols for noise
enhancement. Reduces to zero forcing in the absence of noise.
• Sphere decoder: uses upper triangular decomposition of H to reduce complexity. Finds
constellation point within a sphere of a given radius. Provides near-ML performance
with near-linear complexity.

Main Points

• With TX and RX CSI, capacity of MIMO channel uses waterfilling in space or space/time
- leads to min(Mt , Mr ) capacity gain.

• Without transmitter CSI, use outage as capacity metric.

• Capacity of massive MIMO or MIMO at high SNR scales as min(Mt , Mr ).

• MIMO introduces diversity/multiplexing tradeoff: Optimal use of antennas depends on


application.

• MIMO RX design trades complexity for performance. ML detector is optimal but expo-
nentially complex. Linear decoders enhance noise. Sphere decoders allow performance vs.
complexity tradeoff via radius; most common technique in practice.

You might also like