Scribd
Upload
13 views1 page

Assignment 1 - EC (CS) 301

Uploaded by

Narayan Dey
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
13 views1 page

Assignment 1 - EC (CS) 301

Uploaded by

Narayan Dey
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Date: 06-11-2024

Assignment 1
(Attend question No. 1,2,5,7,8,9,10,11,12,15,18,19 and any three from rest)
(Marks of each question between 2 to 5)

1. Describe the D Flip-Flop using its excitation table, characteristic equation, state
diagram, and present state-next state table.
2. Create a truth table and logic expressions for the outputs of a four-bit binary to gray
code converter. Then, simplify these expressions and create a clean circuit schematic.
3. Design Full Subtractor using Half Subtractor with proper explanation.
4. Convert a D flip-flop to J-K flip-flop.
5. What are the differences between a Sequential and Combinational Circuit?
6. Design a 4-bit parallel adder-subtractor circuit.
7. Design 16:1 MUX using only 4:1 MUX
8. What is race around condition? How we can rectify this problem for JK flip-flip.
9. Implement the function Y(A,B,C)= Ʃ(0,1,3,5,6) using a 4-to-1 MUX.
10. In what ways is a Carry Look Ahead adder superior to a ripple carry adder?
11. What is a parity bit? How many different kinds are there?
12. How does a priority encoder differ from an ordinary encoder?
13. Describe the four-bit magnitude comparator process and write the outputs'
experimentation.
14. Utilizing simple GATEs with the appropriate truth table and circuit layout to realize a
1:4 demultiplexer.
15. What is Latch? Desing the basic SR flip-flop circuit diagram using universal GATE.
16. Write down the application of Flip-flop.
17. Write down the applications of MUX.
18. What is the difference between Edge triggered and Level triggered clock pulse?
19. Design SR flip flop using JK flip flop
20. Implement the full adder circuit using multiplexer.

You might also like