Technical Description
ADANI BV6045
CHECKPOINT X-RAY INSPECTION SYSTEM
www.adanisystems.com
Technical Description
INTENDED USE
The ADANI BV6045 is intended for visual inspection of various objects (mail, hand-held baggage and
other small items) without opening them.
Dual energy imaging provides automatic color coding of materials with different atomic numbers so that
screening staff can easily identify within any parcel dangerous objects or objects that are prohibited for
importing (exporting) or are not declared.
The ADANI BV6045 allows identification of weapons, explosives (including plastic explosives), drugs,
primers and dangerous objects, which are safety hazard.
CONFIGURATION
Device body:
Frame
Conveyor
Inspection tunnel
Distribution panel;
Digital X-ray image receiver:
X-ray sensitive digital detector
Electronic interface unit;
X-ray unit:
X-ray generator;
X-ray collimator;
Operator’s workstation;
Set of control programs;
Set of spare parts, tools and accessories;
TIP software package;
Operational documentation;
Package.
Options:
Exit / entry rollers;
Operator’s desk;
Set of test objects.
www.adanisystems.com
Technical Description
TECHNICAL DATA
CONVEYOR BELT
Maximum distributed load on the
160
conveyor belt, kg, max
Conveyor speed, m / s 0.22±0,03
DIGITAL X-RAY IMAGE DETECTOR
Detector type multiunit array
Type of x-ray sensitive element solid-state photodiode with scintillation coating
Number of detection elements in array 1216
Wire detectability (minimum diameter of 0.08 (40 AWG)
copper wire/standard operating mode)
mm
Steel penetration, standard operation 30
mode, mm
Steel penetration, high penetration mode, 36
mm
X-RAY UNIT
Anode voltage, kV
- Standard operating mode 140
- High penetration mode 160
Angle of radiation 60°
Cooling system oil bath
Anode type stationary
PHYSICAL PARAMETERS
Tunnel dimensions, mm
- Width 610±3
- Height 450±5
Overall dimensions, not more than, mm
- Width 840
- Height 1320
- Length 2120
Weight of scanner, kg, no more than 450
www.adanisystems.com
Technical Description
SOFTWARE FEATURES
The purpose of the system software is to control the operation of the Scanner as well as to provide the
opportunity to acquire, visualize and process digital X-ray images. To facilitate the work of the operator,
a control panel is provided. The panel makes it possible to access all the software features.
GENERAL PURPOSE FUNCTIONS:
Password-protected logon.
SELF-TESTING AND PERFORMANCE SUPPORT FUNCTIONS:
Automatic self-testing;
Displaying messages about operating status of the Scanner;
Warming up the X-ray generator (the process can be started both manually and automatically).
HARDWARE CONTROL FUNCTIONS:
Controlling the conveyor belt drive, the protective shutter’s drive, the X-ray generator;
Automatic changing of generator's operating modes depending on the scanner idle time;
Acquiring data from the X-ray detector;
Automatically calibrating the X-ray detector;
Turning off the X-ray generator in case of emergency;
Indicating X-ray on.
DIGITAL X-RAY IMAGE ACQUISITION, VISUALIZATION, AND PROCESSING FUNCTIONS:
Acquiring images without additional algorithmic processing;
Highlighting optically dense objects;
Adjusting contrast of strongly absorbing objects;
Inverting images;
Performing gamma–correction of images;
Optimizing the overall contrast: combination of edge enhancement and local contrast
enhancement algorithms;
Coloring images according to calculated values of atomic numbers of substances which compose
objects under inspection;
Coloring substances with atomic numbers from a selected range;
Pseudocoloring objects with a possibility of selection of various palettes;
Displaying organic objects with atomic numbers equal to 7, 8, and 9;
Displaying substances according to a selected range of signal strength;
Magnifying one out of nine predefined areas of an image;
Zooming images up to 96x;
Automatically highlighting suspicious objects (which can be related to drugs, explosives, or arms).
ADDITIONAL FUNCTIONS:
Saving X-ray images to files;
Storing a predefined number of images;
Browsing the image archive;
Copying images on external storage media (CD/DVD disks and flash-drives);
Viewing and copying images from a local area network;
Automatic preparing, filing and printing service reports;
Controlling quality of operator’s performance with the TIP program module;
Counting inspected baggage.
www.adanisystems.com
Technical Description
GENERAL LAYOUT OF THE ADANI BV6045
www.adanisystems.com
