Timing & Redundant Network Access

Managed
g Redbox (Redundancy
Ruby3 Box) or 10 Port PRP/HSR
PR Switches

Reliable industrial networking realizing

rea zero packet loss and zero
recovery time
Compliant implementation of botboth PRP (IEC62439-3-4) and HSR
(IEC62439-3-5)
Full FPGA hardware solution with low switching latency
PRP/HSR selection is configurable in software only with the same
hardware platform
Precision time synchronization in accordance with IEEE 1588v2 is
supported
Provides pure 3 port Redbox and also 10 port PRP/HSR switches
PRP/HSR ports and up to 8 Ethernet
including 2 Gigabit combo PRP/H
ports including Gigabit SFP ports and 100 Mbit fiber/copper ports
Exceeds IEC61850-3 and IEEE1613

Overview SNTP,PTP,RTC;
SSH,SSL,TACACS+,RADIUS,ACL;
The new Ruby3 series switches from Kyland are specially designed for FTP,TFTP,Syslog;
reliable industrial networking realizing both PRP (Parallel Redundancy ARP,Modbus TCP,QoS,LACP
Protocol) and HSR (High-availability Seamless Redundancy) which are
defined in IEC62439-3. The Ruby3 provides the ultimate in network Switch Properties
reliability and zero failover time from network faults. Full FPGA hardware (Following switching properties are for switch part of Ruby3 only)
solution enables Kyland Ruby3 low switching latency and PRP/HSR is Priority Queues: 4
selectable via software with the same hardware platform. Precision time Number of VLANs: 256
synchronization in accordance with IEEE 1588v2 is supported on Kyland VLAN ID: 1-4094
Ruby3. Ruby3 series not only provide 3 port pure Redbox but also 10 port Number of Multicast Groups: 256
PRP/HSR switches including 2 Gigabit combo PRP/HSR ports and up to 8 MAC Table: 8K
Ethernet ports including Gigabit SFP ports and 100 Mbit fiber/copper Packet Buffer: 1Mbit
ports. Packet Forwarding Rate: 5.5Mpps
Table size: Standard, 512; Professional, 8K
*Product Status: Ring Node: Standard, 30; Professional, 200
RFD (Ready for delivery) since April 1st, 2014 Switching Delay: <3μs

Interface
Technical Specifications Port A: Gigabit combo port
Port B: Gigabit combo port
Standard Gigabit Ethernet port: 1 Gigabit combo port, or 2 Gigabit SFP ports
IEEE802.3i, IEEE802.3u, IEEE802.3ab, IEEE802.3ac, IEEE802.3ad, IEEE 802.3z Fast Ethernet fiber ports: Optional 2 100Base-FX multi mode or single
IEEE 802.3x, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE802.1X, IEEE1588-2008 mode fiber ports in SC/ST connector
IEC62439-3 Fast Ethernet RJ45 Ports: 6 10/100Base-TX RJ45 ports
Console Port: RS232 (RJ45 connector)
Protocols Alarm Contact: 3-pin 5.08mm-spacing plug-in terminal block,
PRP, HSR 250VAC/220VDC Max, 2A Max, 60W Max
DT-Ring,DT-Ring+,DT-VLAN,MSTP,DRP;
IGMPsnooping,GMRP;VLAN,GVRP,PVLAN; LED
Telnet,HTTP,HTTPS,SNMPv1/v2/v3,RMON,LLDP,Bootp,DHCP LEDs on Front Panel:
server/relay/client,DHCP Option 82; Running LED: Run
Alarm LED: Alarm

72 [email protected] / www.kyland.com
 Timing &
11
Power LED: PWR1, PWR2 MTBF Redundant Network
Redundancy LED: PRP/HSR 345,000 hrs
Interface LED: Link/ACT, Speed (RJ45 port)
Warranty
Transmission Distance 5 years
Twisted Pair: 100m (Standard CAT5, CAT5e network cable)
Multi Mode Fiber: 1310nm, 5km (100M); 850nm, 550m (1000M) Approvals
Single Mode Fiber: CE, FCC, UL508 Class1 Div2 (Pending)
1310nm, 40km/60km (100M); 1550nm, 60km/80km (100M)
1310nm, 10km/40km (1000M); 1550nm, 60km/80km (1000M) Industrial Standard
EMI:
Power Requirements FCC CFR47 Part 15, EN55022/CISPR22, Class A
Power Input: 24DCW (18-72VDC), 220AC/DCW(85-264VAC/77-300VDC)
Power Terminal: 5-pin 5.08mm-spacing plug-in terminal block EMS:
Power Consumption: <5W (Ruby3-3G only), <8W (Others) IEC61000-4-2 (ESD): ±8kV (contact), ±15kV (air)
Overload Protection: Support IEC61000-4-3 (RS): 10V/m (80MHz-2GHz)
Reverse Connection Protection: Support IEC61000-4-4 (EFT): Power Port: ±4kV; Data Port: ±2kV
Redundancy Protection: Support (24DCW version only) IEC61000-4-5 (Surge): Power Port: ±2kV/DM, ±4kV/CM; Data Port: ±2kV
IEC61000-4-6 (CS): 3V (10kHz-150kHz); 10V (150kHz-80MHz)
Physical Characteristics IEC61000-4-16 (Common mode conduction): 30V (cont.), 300V (1s)
Housing: Metal, fanless
Protection Class: IP40 Machinery:
Dimensions (W×H×D): 66×135×107.5mm (2.60×5.31×4.23 in.) IEC60068-2-6 (Vibration)
Weight: 0.76kg (1.676 pound) IEC60068-2-27 (Shock)
Mounting: DIN-Rail IEC60068-2-32 (Free Fall)

Environmental Limits Industry: IEC61000-6-2

Operating Temperature: -40 to 85°C (-40 to 185°F) Power: IEC61850-3, IEEE1613
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)

Mechanical Drawing

Ordering Information
Ruby3 - ______ - ___________________ - ___ 1310nm 40km in SC connector
Ports Distance & Connector PS SC60 = Single mode fiber, 1310nm 60km in SC connector
SC80 = Single mode fiber, 1550nm 80km in SC connector
Ports
3G = 2 Gigabit combo ports as Port-A and Port-B for PRP/HSR, 1 Gigabit
PS: Power Supply
combo port as Local port
L1 = 24DCW(18-72VDC), dual redundant power inputs
2G2GX6T = 2 Gigabit combo ports as Port-A and Port-B for PRP/HSR, 2
H1 = 220AC/DCW(85-264VAC/77-300VDC), single power input
Gigabit SFP ports and 6 10/100Base-TX RJ45 ports
2G2S6T = 2 Gigabit combo ports as Port-A and Port-B for PRP/HSR, 2
Example Order Codes
100Base-FX single mode port, 6 10/100Base-TX RJ45 ports
Ruby3-3G-H1
2G2M6T = 2 Gigabit combo ports as Port-A and Port-B for PRP/HSR, 2
Redbox with 3 Gigabit combo ports, 220AC/DCW(85-264VAC/77-300VDC),
100Base-FX multi mode port, 6 10/100Base-TX RJ45 ports
single power input

Distance & Connector

Ruby3-2G2S6T-SC-L1
SC = Multi mode fiber: 1310nm 5km in SC connector; Single mode fiber:
PRP/HSR switch with 2 PRP/HSR Gigabit combo ports, 2 single mode fiber
1310nm 40km in SC connector
ports, 1310nm 40km in SC connector, 24DCW (18-72VDC) dual redundant
ST = Multi mode fiber: 1310nm 5km in SC connector; Single mode fiber:
power inputs

[email protected] / www.kyland.com 73