Sr.

CODE/
DESCRIPTION
No. STANDARD
1. API 5L Specification for Line Pipe
2. API 6D Specification for Pipeline Valves
3. API 520 Sizing, Selection and Installation of Pressure-relieving Devices
4. API 526 Flanged Steel Pressure-relief Valves
5. API 527 Seat Tightness of Pressure Relief Valves
6. API 594 Check Valves: Flanged, Lug, Wafer and Butt-welding
7. API 598 Valve Inspection and Testing
8. API 600 Steel Gate Valves - Flanged and Butt-welding Ends, Bolted Bonnets
9. API 602 Steel Gate, Globe and Check Valves for Sizes DN 100 and Smaller for
the Petroleum and Natural Gas Industries
10. API 607 Fire Test for Quarter-turn Valves and Valves Equipped with Non-metallic
Seats
11. API 608 Metal Ball Valves-Flanged, Threaded and Welding Ends
12. API 609 Butterfly Valves: Double-flanged, Lug- and Wafer-type
13. API 610 Centrifugal Pumps for Petroleum, Petrochemical and Natural Gas
Industries
14. API 617 Axial and Centrifugal Compressors and Expander- compressors for
Petroleum, Chemical and Gas Industry Services
15. API 618 Reciprocating Compressors for Petroleum, Chemical and Gas Industry
Services
16. API 620 Design and Construction of Large, Welded, Low-Pressure Storage Tanks
17. API 623 Steel Globe Valves-Flanged and Butt-welding Ends, Bolted Bonnets
18. API 671 Special Purpose Couplings for Petroleum, Chemical and Gas
Industry Services
19. API 674 Positive Displacement Pumps - Reciprocating
20. API 675 Positive Displacement Pumps-Controlled Volume for Petroleum,
Chemical, and Gas Industry Services
21. API 676 Positive Displacement Pumps-Rotary

22. API 681 Liquid Ring Vacuum Pumps and Compressors for Petroleum,
Chemical, and Gas Industry Services
23. API 682 Pumps Shaft Sealing Systems for Centrifugal and Rotary Pumps
24. ASME/ANSI Pipe Flanges and Flanged Fittings: NPS 1/2 through NPS 24 Metric/Inch
B 16.5 Standard
25. ASME/ANSI Factory-Made Wrought Butt-welding Fittings
B 16.9
26. ASME/ANSI Face-to-Face and End-to-End Dimensions of Valves
B 16.10
27. ASME/ANSI Forged Fittings, Socket-Welding and Threaded
B 16.11
28. ASME/ANSI Metallic Gaskets for Pipe Flanges: Ring-Joint, Spiral-Wound, and Jacketed
B 16.20
29. ASME/ANSI Non-metallic Flat Gaskets for Pipe Flanges
B 16.21
30. ASME/ANSI Valves - Flanged, Threaded, and Welding End
B 16.34
31. ASME/ANSI Large Diameter Steel Flanges: NPS 26 through NPS 60 Metric/Inch
B 16.47 Standard
32. ASME/ANSI Square, Hex, Heavy Hex, and Askew Head Bolts and Hex, Heavy Hex,
B 18.2.1 Hex Flange, Lobed Head, and Lag Screws (Inch Series)
33. ASME/ANSI Nuts for General Applications: Machine Screw Nuts, Hex, Square, Hex
B 18.2.2 Flange, and Coupling Nuts (Inch Series)
34. ASME/ANSI Process Piping
B 31.3
35. ASME/ANSI Welded and Seamless Wrought Steel Pipe
B 36.10
36. ASME/ANSI Stainless Steel Pipe
B 36.19
37. ASME Material Specification
Section II
38. ASME Non Destructive Examination
Section V
39. ASME Rules for Construction of Pressure Vessels
Section VIII
Division
40. 1/2/3
ASME Welding and Brazing Qualifications
Section IX
41. ASTM F 441 Standard Specification for Chlorinated Poly (Vinyl Chloride)
(CPVC) Plastic Pipe, Schedules 40 and 80
42. AWS B Specification for Welding Procedure and Performance
2.4:2012 Qualification for Thermoplastics
43. BS-4994 Specification for the design and construction of vessels and storage tanks in
reinforced plastics
44. BS 7159 Code of practice for Design and construction of glass reinforced plastics
(GRP) piping systems for individual plants or sites
45. BS EN 13121 GRP tanks and vessels for use above ground
46. DIN 8077 Polypropylene (PP) pipes
47. DIN 16962 Pipe joint assemblies and fittings for types 1 and 2 polypropylene (PP)
pressure pipes; tees and branches produced by segment inserts and
48. DVS 2203 necking of
Testing forwelding
butt welding;
joints dimensions
of thermoplastics (All parts and supplements )

49. DVS 2207 Welding of Thermoplastics (All Parts & Supplements)

50. DVS 2211 Welding of thermoplastics – Welding fillers – Marking,
requirements and tests
51. DVS 2231 Above-ground tanks, apparatus and piping made of
thermoplastics – Guide to quality assurance
52. IBR Indian Boiler Regulations
53. IS 325 Three-phase induction motors
54. IS 800 General Construction in Steel - Code of Practice
55. IS 807 Design, Erection and testing (Structural Portion) of Cranes and Hoists
56. IS 875: Part Code of Practice for Design Loads (Other than Earthquake) for Buildings
3 and Structures : Wind Loads
57. IS 1030 Carbon steel castings for general engineering purposes
58. IS 1239 Mild steel tubes, tubulars and other wrought steel fittings
59. IS 1363 Hexagon head bolts, screws and nuts of product grade C
60. IS 1364 Hexagon Head Bolts, Screws and Nuts of Product Grades A and B
61. IS 1367 Technical Supply Conditions for Threaded Steel Fasteners
62. IS 1893 Criteria for earthquake resistant design of structures
63. IS 2002 Steel plates for pressure vessels for intermediate & high temperature
service including boilers
64. IS 2041 Steel Plates for Pressure Vessels Used at Moderate and Low Temperature
- Specification
65. IS 2062 Hot Rolled Low, Medium and High Tensile Structural Steel
66. IS 2379 Colour code for identification of pipe lines
67. IS 2825 Code for unfired pressure vessels
68. IS 3109 Specification for Load Chain for Lifting Purposes
69. IS 3224 Valve Fittings for Compressed Gas Cylinders Excluding
Liquefied Petroleum Gas (LPG) Cylinders
70. IS 3832 Hand-Operated Chain Pulley Blocks - Specification
71. IS 4179 Sizes of process vessels and leading dimensions
72. IS 4263 Code of Safety for Chlorine
73. IS 4682 Code of practice for lining of vessels and equipment for chemical
processes
74. IS 4864 to IS Specification for Shell Flanges for Vessels and Equipment
4870
75. IS 4984 Specification for high density polyethylene pipes for
potable water supplies
76. IS 5120 Technical requirements for Rotodynamic special purpose pumps
77. IS 5572 Classification of hazardous areas (other than mines) having flammable
gases and vapours for electrical installation
78. IS 5600 Pumps - Sewage and drainage specification.
79. IS 5624 Foundation bolts - Specification
80. IS 5639 Specification for Pumps Handling Chemicals and Corrosive Liquids
81. IS 5659 Specification for Pumps for Process Water
82. IS 6157 Valve inspection and test
 83. IS 8008 : Part Injection Moulded/Machined High Density Polyethylene (HDPE)
1 Fittings for Potable Water Supplies - Specification
84. IS 8008 : Part -Injection
Part 1 : General Requirements
Moulded/Machined for Fittings
High Density Polyethylene (HDPE) Fittings
2 to Part 9 for Potable Water Supplies - Specification
85. IS-9083 - Part 2 : data
Purchaser's Specific
sheetRequirements fortanks
for rubber lined 90º Bend , 90º Tee , Reducers,
86. IS 9890 Specification for General Purpose Ball Valves
87. IS 10221 Code of practice for coating and wrapping of underground mild steel
pipelines
88. IS 10592 Specification for industrial emergency showers, eye and face
fountains and combination units
89. IS 10605 Steel globe valves (flanged and butt welded ends) for
petroleum, petrochemical and allied industries
90. IS 10611 Specification for Steel Gate Valves (Flanged and Butt- welded Ends) for
Petroleum, Petrochemicals and Allied Industries
91. IS 11791 Specification for Diaphragm Type Valves for General
Purposes
92. IS 11792 Steel ball valve for the petroleum petrochemical and allied industries
93. IS 14164 Industrial Application and Finishing of Thermal Insulation Material at
Temperature Above -80OC and up to 750OC - Code of Practice
94. IS 14333 High density polyethylene pipe for sewerage – Specification
95. IS 15657 Centrifugal Pumps for Petroleum,Petrochemical and Natural Gas
Industries
96. IS 15801 Polypropylene random co-polymer pipes for hot and cold water
supplies
97. ISO 1940 Mechanical vibration: Balance quality requirements for rotors
in a constant (rigid) state
98. ISO 11342 Mechanical vibration: Methods and criteria for the mechanical
balancing of flexible rotors
99. ISO 13709 Centrifugal Pumps for Petroleum,Petrochemical and Natural Gas
Industries
100. ISO 14692 Petroleum and natural gas industries -- Glass-reinforced
plastics (GRP) piping
101. TEMA Shell & Tube Type Heat Exchanger Design
102. WRC 107 Local Stresses In Spherical And Cylindrical Shells Due To External
Loadings
103. WRC 297 Local Stresses In Cylindrical Shells Due To External
Loadings On Nozzles