PROGRAM BOOK FOR

SHORT-TERM INTERNSHIP

(Onsite / Virtual)

University
 An Internship Report on

(Title of the Internship)

Submitted in accordance with the of requirement for the degree

Under the Faculty Guideship of

Name of the Faculty (Guide)

Department of

(Name of the College)

Submitted by:

Reg. No:
 Instructions to
Students
Please read the detailed Guidelines on Internship hosted on the website of AP State Council of Higher
Education https://apsche.ap.gov.in

1. It is mandatory for all the students to complete 2 months (180 hours) of short- term
internship either physically or virtually.
2. Every student should identify the organization for internship in consultation with the
College Principal/the authorized person nominated by the Principal.
3. Report to the intern organization as per the schedule given by the College. You must
make your own arrangements for transportation to reach the organization.
4. You should maintain punctuality in attending the internship. Daily attendance is
compulsory.
5. You are expected to learn about the organization, policies, procedures, and processes
by interacting with the people working in the organization and by consulting the
supervisor attached to the interns.
6. While you are attending the internship, follow the rules and regulations of the intern
organization.
7. While in the intern organization, always wear your College Identity Card.
8. If your College has a prescribed dress as uniform, wear the uniform daily, as you
attend to your assigned duties.
9. You will be assigned a Faculty Guide from your College. He/She will be creating a
WhatsApp group with your fellow interns. Post your daily activity done and/or any
difficulty you encounter during the internship.
10. Identify five or more learning objectives in consultation with your Faculty Guide.
These learning objectives can address:
a. Data and Information you are expected to collect about the organization
and/or industry.
b. Job Skills you are expected to acquire.
c. Development of professional competencies that lead to future career success.
11. Practice professional communication skills with team members, co-interns, and your
supervisor. This includes expressing thoughts and ideas effectively through oral,
written, and non-verbal communication, and utilizing listening skills.
12. Be aware of the communication culture in your work environment. Follow up and
communicate regularly with your supervisor to provide updates on your progress
with work assignments.
13. Never be hesitant to ask questions to make sure you fully understand what you need
to do your work and to contribute to the organization.
14. Be regular in filling up your Program Book. It shall be filled up in your own
handwriting. Add additional sheets wherever necessary.
15. At the end of internship, you shall be evaluated by your Supervisor of the intern
organization.
16. There shall also be evaluation at the end of the internship by the Faculty Guide and the
Principal.
17. Do not meddle with the instruments/equipment you work with.
18. Ensure that you do not cause any disturbance to the regular activities of the intern
organization.
19. Be cordial but not too intimate with the employees of the intern organization and your
fellow interns.
20. You should understand that during the internship programme, you are the
ambassador of your College, and your behavior during the internship programme is of
utmost importance.
21. If you are involved in any discipline related issues, you will be withdrawn from the
internship programme immediately and disciplinary action shall be initiated.
22. Do not forget to keep up your family pride and prestige of your College.

<<@>>
 Student’s Declaration

I, a student of
Program, Reg. No. of the Department of
College do hereby declare that I have completed the mandatory internship from
to in (Name of the intern
organization) under the Faculty Guideship of
(Name of the Faculty Guide), Department of
,
(Name of the College)

(Signature and Date)

 Official Certification

This is to certify that (Name of the

student) Reg. No. has completed his/her internship in
(Name of the Intern Organization) on
(Title of the Internship) under my supervision
as a part of partial fulfilment of the
requirement for the Degree of
in the Department of
(Name of the College).
This is accepted for evaluation.

(Signatory with Date and Seal)

Endorsements

Faculty Guide

Head of the Department

Principal
 Certificate from Intern Organization

This is to certify that (Name of the

intern) Reg. No of (Name of the
College) underwent internship in (Name of the
Intern Organization) from to

The overall performance of the intern during his/her internship is found to be

(Satisfactory/Not Satisfactory).

Authorized Signatory with Date and Seal

Acknowledgements
 Contents

S.NO TOPIC PAGE NO.

1.
EXECUTIVE SUMMARY

2. OVERVIEW OF THE
ORGANIZATION

3.
INTERNSHIP PART

4.
ACTIVITY LOG

5. OUTCOMES DESCRIPTION
 CHAPTER 1: EXECUTIVE SUMMARY

As a part of the internship, I completed a IOT (Internet of Things) internship at Naresh

Technologies and Consultancy Services, an electronics research and development organization.
The internship spanned a period of [5 weeks] and provided me with valuable insights into the
world of embedded board, cloud platforms, and its operations.
Naresh Technologies & Consultancy Services is a Training and Consultancy Services that provides
internship resources and career services to students and employers. The platform offers internship searching
and posting services as well as many other career services such as counselling, cover-letter writing, resume
building, and training programs to students.

Naresh Technologies & Consultancy Services is a startup company. we are a technology company on
a mission to equip students with relevant skills and practical exposure to help them get the best possible start
to their careers. Imagine a world full of freedom and possibilities. A world where you can discover a passion
and turn it into your career. A world where you graduate fully assured, confident, and prepared to stake a
claim on your place in the world.

OBJECTIVES
● To learn about the basic concepts of Embedded system with IOT.
● To study about Cloud platforms.
● To gain Knowledge in circuit designing.
● To implement code in electronic components.
● To understand Testing and Verification.
● To know how to work at industries.
● To know what are the job roles and its work.
● To learn the software tools for designing circuits and its coding.

OUTCOMES
● Learned the basics concepts of Embedded system with IOT.
● Studied about the Cloud platforms.
● Learned and gained knowledge on coding and its implementation.
● Worked on the tools of cloud platforms like AWS, ThingSpeak.
● Gained knowledge on how the embedded engineers will work in the industry.
● Learned the implementation of circuit designs, coding and its utilizations .
 CHAPTER 2: OVERVIEW OF THE ORGANIZATION

Naresh Technologies & Consultancy Services is a training and consultancy firm, it can be assumed
that they provide services related to education, training, and consulting. Typically, such organizations
offer a range of services to individuals and businesses, including:
Training Services:

1. Technical Training: This could include courses related to information technology, programming
languages, software development, data science, etc.

2. Soft Skills Training: Training in communication, leadership, teamwork, and other interpersonal skills
is often provided for professional development.

3. Certification Programs: Preparation courses for various industry certifications, which are essential
for career growth in many fields.

4. Customized Training: Tailored training programs designed specifically for businesses or

organizations to enhance the skills of their employees.

Consultancy Services:

1. IT Consultancy: Advising businesses on how to use information technology to meet their objectives
or overcome problems.

2. Business Process Optimization: Analysing and optimizing existing business processes to improve
efficiency and reduce costs.

3. Data Analysis and Interpretation: Helping businesses make sense of data, providing insights that
can be used for strategic decision-making.

4. Project Management: Providing expertise in managing projects, ensuring they are completed on time
and within budget.

5. Cybersecurity Consultancy: Advising businesses on how to protect their digital assets from cyber
threats and attacks.

Introduction :

Naresh Technologies & Consultancy Services is a leading organization specializing in comprehensive

training and consultancy services. With a team of experienced professionals and experts in various
fields, we are committed to empowering individuals and businesses with the knowledge and skills
needed to thrive in today's competitive world.

Our Training Services:

 At Naresh Technologies & Consultancy Services, we offer a diverse range of training programs, from
technical courses covering the latest programming languages and technologies to soft skills
development, ensuring that our clients are well-equipped to meet the challenges of the modern
workforce.

Our Consultancy Services:

In addition to our training programs, we provide strategic consultancy services to businesses of all
sizes. Our experts work closely with clients to understand their unique needs and challenges, offering
tailored solutions in areas such as IT consultancy, business process optimization, data analysis, project
management, and cybersecurity.

Why Choose Us:

 Expert Trainers: Our trainers are industry experts with years of practical experience, ensuring the
highest quality of education.

 Customized Solutions: We understand that every business is unique. That's why we provide
customized training and consultancy services to meet specific requirements.

 Cutting-Edge Curriculum: Our training programs are constantly updated to reflect the latest industry
trends and technologies, keeping our clients ahead of the curve.

 Client-Centric Approach: We prioritize client satisfaction, focusing on delivering exceptional

services that add tangible value to individuals and organizations.

Whether you're an individual looking to enhance your skills or a business seeking strategic guidance,
Naresh Technologies & Consultancy Services is your trusted partner for success. Contact us today to
explore how we can help you achieve your goals.

Organizational Structure

Naresh Technologies & Consultancy Services might have a structure that includes various departments
such as:

1. Executive Leadership: This includes top executives such as the CEO (Chief Executive Officer),
CFO (Chief Financial Officer), and other C-level executives who are responsible for the overall
direction of the company.

2. Departments: Different departments within the organization might include IT Services,

Consultancy, Training, Sales and Marketing, Human Resources, Finance, and Administration.
3. Managers and Team Leaders: Each department may have managers or team leaders who oversee
specific teams or projects.

4. Employees: These are the professionals working within the various departments, including
consultants, trainers, IT specialists, and administrative staff.

5. Support Staff: This includes roles such as receptionists, administrative assistants, and other
support personnel who help in the day-to-day functioning of the organization.

6. Clients and Partners: While not part of the internal organizational structure, clients and partners
are integral to the company’s operations. Maintaining strong relationships with clients and partners
is essential for the company's success.

Internship Policy at Naresh Technologies & Consultancy Services

At Naresh Technologies & Consultancy Services, we recognize the value of internships as a bridge
between academic learning and professional experience. Our internship program is designed to
provide aspiring professionals with meaningful opportunities to learn, grow, and contribute within our
organization. To ensure a mutually beneficial experience for both our interns and the organization, we
have established the following policies:

**1. ** Equal Opportunity: We are committed to providing equal opportunities to all interns,
regardless of their background, ethnicity, gender, or any other characteristic. Selections are made
based on merit and the potential to contribute effectively to our organization.

**2. ** Learning and Development: Interns at Naresh Technologies & Consultancy Services are
considered valuable members of our team. We provide a supportive environment where interns can
enhance their skills, gain practical experience, and participate in real projects under the guidance of
experienced professionals.

**3. ** Mentorship: Each intern is assigned a mentor who will guide and support them throughout
their internship. Our mentors are experienced professionals who provide valuable insights, feedback,
and encouragement to help interns succeed in their roles.

**4. ** Professional Conduct: We expect interns to adhere to the same professional standards as our
full-time employees. This includes punctuality, respect for colleagues, clients, and company property,
and maintaining confidentiality on sensitive matters.

**5. ** Project Involvement: Interns will be involved in meaningful projects that align with their
skills and interests. These projects are carefully chosen to provide a learning experience while also
contributing to the organization's goals.

**6. ** Feedback and Evaluation: Regular feedback sessions will be conducted to assess the intern's
 performance and provide constructive guidance for improvement. Successful completion of the
internship may lead to a certificate of achievement and a potential opportunity for future collaboration.

**7. ** Confidentiality: Interns will have access to sensitive information and are expected to
maintain strict confidentiality about the company's operations, clients, and projects, both during and
after their internship.

**8. ** Duration and Schedule: The duration and schedule of the internship will be clearly defined at
the beginning of the program. Any changes to the schedule should be communicated and agreed upon
in advance.

**9. ** Conclusion of Internship: At the end of the internship, interns are expected to return any
company property and materials and complete an exit interview to provide feedback about their
experience.

Future Plans:

1. Diversification of Services: The company could expand its range of services to cater to a broader
clientele. This might include offering new training programs, specialized consultancy services, or
venturing into emerging technology sectors.

2. Global Expansion: Naresh Technologies & Consultancy Services might consider expanding its
operations internationally, tapping into new markets and establishing a global presence. This
expansion could involve opening offices in different countries or forming strategic partnerships with
international organizations.

3. Digital Transformation: Embracing digital technologies internally can enhance efficiency. This
might involve implementing advanced project management software, data analytics tools, or customer
relationship management (CRM) systems.

4. Focus on Emerging Technologies: Staying ahead of the curve in terms of technological

advancements is crucial. The company could focus on emerging technologies such as artificial
intelligence, blockchain, cybersecurity, or Internet of Things (IoT), offering specialized services and
training programs in these areas.

5. Partnerships and Collaborations: Collaborating with universities, research institutions, or other

businesses can foster innovation. Partnerships can lead to joint research projects, access to new talent
pools, and the development of cutting-edge solutions.

6. Quality Assurance and Certifications: Obtaining industry certifications and quality assurance
standards can enhance the company’s reputation. Certifications in specific technologies or consultancy
methodologies can instill trust in clients and partners.
7. Corporate Social Responsibility (CSR): Engaging in CSR activities not only benefits society but
also enhances the company’s image. This could include supporting education initiatives,
environmental conservation, or community development projects.

8. Talent Development: Investing in the continuous development of employees through training,

workshops, and skill enhancement programs can ensure that the company always has a skilled
workforce ready to tackle new challenges.

9. Client Relationship Management: Strengthening relationships with existing clients through excellent
service and personalized attention can lead to long-term partnerships and repeat business.

10. Innovation and Research: Encouraging a culture of innovation within the organization can lead to
the development of proprietary technologies, methodologies, or services, giving the company a
competitive edge.
 CHAPTER 3: INTERNSHIP PART

An internship can provide a student with paid professional work experience in a safe and
structured environment with help from experts. Typically, an intern will be assigned a
worksite mentor and school-based internship coordinator. The worksite mentor will help train a
student and advise him or her on how to navigate a particular worksite culture and interact with
other workers. The school internship coordinator helps the mentor and student build a strong
relationship that will help the intern have positive outcomes from their internship
experience. The internship coordinator can also help the student learn how to manage their
expectations and implement successful work habits.
Through this Internship, I have improved my knowledge in the field of Embedded System
with IOT. The internship time period is 5 weeks. The working time is scheduled with comfortable
and flexible timings where most of the work is research work.
The tasks are given for every completion of 2 to 3 topics and need to be done within a
period of time provided as a deadline to submit the tasks and day-to-day work is maintained for
the reference purpose. The documentation is maintained from topic to topic. These are the main
responsibilities that need to be followed by every intern. They provided a few mentors with a
clear explanation of the topics and a few of them to clear the doubts raised by interns.
The weekly tests are conducted once in a week on the topics previously covered. The
revision classes are held on every weekend and special doubt clarification sessions are held which
are helpful to all the interns. Finally, by this internship, I have improved the following things
● Confidence: By keeping a target to complete the work and reaching the target helps to
build confidence in my mind.
● Care of responsibilities: It is helpful to get knowledge on what responsibilities need to
be taken by the intern.

● Communication skills: Mainly communication skills are improved the group discussions
and by delivering seminars before the group of members.

● Researching: By preparing the topics given as works or tasks which need to be learned
ourselves without any help from others.

Page No: 5
 Activities under taken as an intern

● Research and implementation of applications od IOT

● Developing IOT applications according to requirements
● Selection of appropriate components and software
● Performing statistical analysis
● Write the embedded c code as for the requirement

Equipment Used

THINGSPEAK

ThingSpeak is an IoT analytics platform service that allows you to aggregate, visualize, and analyze
live data streams in the cloud. You can send data to ThingSpeak from your devices, create instant
visualizations of live data, and send alerts using web services like Twitter and Twilio. With
MATLAB analytics inside ThingSpeak, you can write and execute MATLAB code to perform
preprocessing, visualizations, and analyses. ThingSpeak enables engineers and scientists to prototype
and build IoT systems without setting up servers or developing web software.

 Data Collection : ThingSpeak allows you to collect data from various IoT devices and sensors. You
can send data to ThingSpeak using a variety of protocols, including HTTP, MQTT, and others.

 Channels : In ThingSpeak, data is organized into channels. A channel is a collection of data fields,
and each field can store a different type of data. For example, you might have a temperature field, a
humidity field, and so on.

 Visualization : ThingSpeak provides built-in tools for visualizing data in the form of charts, graphs,
and gauges. This makes it easy to understand trends and patterns in your IoT data.

 Apps : ThingSpeak supports the creation of MATLAB-based apps that allow you to perform custom
analysis and visualization on your data. You can also use third-party plugins to extend the
functionality of ThingSpeak.

 Integration : ThingSpeak can be integrated with other IoT platforms and services. It also supports
integration with third-party applications and devices.

 React : ThingSpeak allows you to set up reactions to your data. For example, you can trigger an
action when a certain condition is met, such as sending an email or tweeting a message.

 Open API : ThingSpeak provides an open API, allowing developers to build custom applications
and integrations.

 IoT Analytics : The platform includes basic analytics tools for understanding the patterns and trends
in your IoT data.

 Free and Paid plans : ThingSpeak offers both free and paid plans. The free plan has limitations on
the amount of data that can be stored and the frequency of data updates. Paid plans provide
additional features and higher limits.
 Advantages
 Ease of use: ThingSpeak provides a user-friendly interface that simplifies the process of setting up
and managing IoT devices and data. This ease of use is particularly beneficial for beginners and
those without extensive programming or IoT experience.

 Cloud – Based : Being a cloud-based platform, ThingSpeak eliminates the need for users to manage
their own servers. This makes it convenient for individuals and organizations to quickly deploy IoT
solutions without worrying about infrastructure management.

 Free – Tier : ThingSpeak offers a free plan with basic features, making it accessible for hobbyists,
students, and small-scale projects. This allows users to explore and experiment with IoT concepts
without immediate financial commitments.

 Integration with MATLAB : ThingSpeak integrates seamlessly with MATLAB, a popular

numerical computing environment. This integration enables users to perform advanced analytics,
data processing, and visualization using MATLAB scripts and functions directly within the
ThingSpeak platform.

 Open API : ThingSpeak provides an open API that allows developers to create custom applications,
integrate with other services, and extend the functionality of the platform. This openness fosters
innovation and flexibility in building IoT solutions.

 Customizable Visualization : The platform offers built-in tools for visualizing data with
customizable charts, graphs, and gauges. Users can easily create dashboards that suit their specific
needs and preferences.

 React and Analyze : ThingSpeak allows users to set up reactions based on the data received. For
example, you can trigger alerts, notifications, or other actions when certain conditions are met. This
feature is useful for real-time monitoring and response.

Applications

 Home Automation : ThingSpeak can be used to monitor and control smart devices in a home
automation system. For example, you can collect data from temperature sensors, motion
detectors, and smart appliances, and use ThingSpeak to analyze and visualize this data.
 Weather Stations : Individuals or organizations can set up weather stations with sensors for
temperature, humidity, pressure, and other weather-related parameters. The collected data can
be sent to ThingSpeak for analysis and historical tracking.

 Industrial IoT (IIoT) : In industrial settings, ThingSpeak can be used to monitor and analyze
data from sensors on machines and equipment. This can help in predictive maintenance,
optimizing processes, and ensuring efficient operation.

 Agriculture Monitoring : Farmers can use ThingSpeak to collect data from soil moisture
sensors, weather stations, and other agricultural sensors. This data can then be analyzed to
make informed decisions about irrigation, fertilization, and crop health.
 Healthcare Monitoring : ThingSpeak can be applied in healthcare for remote patient
monitoring. Connected devices, such as wearables or home health monitoring equipment, can
send data to ThingSpeak for analysis. This can be useful for tracking vital signs or managing
chronic conditions.

ACTIVITY LOG FOR THE FIRST WEEK

 D Pers
ay Brief description of on
the daily Learning
& Outcome InChar
D activity ge
at Signat
e ure

Day – 1

Day - 2

Day – 3

Day – 4

Day – 5

Day –6

Page No: 9
 WEEKLY REPORT
WEEK – 1
(From Dt : to Dt : )

Detailed Report:
First week sessions are all about the Introduction to the Organization, the roles of the interns
and introduction about the Embedded System and IoT. Acquired knowledge about the cloud
platforms and also implemented libraries and worked on online simulators like

 TinkerCad
 Wokwi
 ThingSpeak
 Blynk

 ThingSpeak is an IoT analytics platform service that allows you to aggregate, visualize, and analyze
live data streams in the cloud. You can send data to ThingSpeak from your devices, create instant
visualization of live data, and send alerts.

 Wokwi is an online Electronics simulator. You can use it to simulate Arduino, ESP32, STM32, and
many other popular boards, parts and sensors. Here are some quick examples of things you can
make with Wokwi: Arduino Uno "Hello World"

 Tinkercad is an amazingly powerful easy-to-use tool for creating digital designs that are ready to be
3D printed into super-cool physical objects. You will be guided through the 3D design process via
easy hands-on "Lessons", that teach you the basics of Tinkercad before moving on to more complex
modeling techniques.

 Blynk was designed for the Internet of Things. It can control hardware remotely, it can display
sensor data, it can store data, visualize it and do many other cool things.

So, with this gained knowledge to apply the embedded systems and iot and able to perform the sensor
operations, cloud storage and communications.

Page No: 10
 ACTIVITY LOG FOR THE SECOND WEEK

D Pers
ay Brief description of the Learning on
& daily activity InCha
Outcome
D rge
at Signa
e ture

Day – 1

Day - 2

Day – 3

Day – 4

Day – 5

Day –6

Page No: 11
 WEEKLY REPORT
WEEK –2
(From Dt : to Dt : )

Detailed Report:

Second week session started with working on Arduino boards and their libraries and brief introduction
about the sensors. Covered some basic sensor interfacing like

 DHT11
 MQ2
 IR Sensor
 LDR
 Ultra Sonic Sensor

 Interfacing IR sensor with Arduino UNO

1. Connect the Vcc pin of the IR sensor to the Vcc of the Arduino via a breadboard.
2. Connect the ground pin of the IR sensor to the ground of the Arduino.
3. Connect the output pin of the IR sensor to D2 of the Arduino.
4. Connect cathode lead of the LED to the ground rail of the breadboard.
5. Connect the anode lead of the LED to one of the arms of the 220Ω resistor.
6. Connect another arm of the resistor to D3 of the Arduino.

 Interfacing Ultra sonic sensor with Arduino UNO

1. Vcc: connected to the 5V in Arduino

2. TRIG (trigger): connected to PIN 10 of the Arduino is used as Transmitter, this pin is
used to transmit the sound from the Ultrasonic sensor. Trigger should be high. It is
connected to the digital pin of the Arduino and used as output pin.
3. ECHO: connected to PIN 9 of Arduino. Echo is used as a Receiver, it receives the sound. It
is connected to the digital pin of the Arduino and used as input pin. In this diagram, we have
connected Echo to pin 9.
4. GND (ground): connected to the GND of Arduino.

The sessions of second week went on the topic Arduino IDE . Also on the topic Interfacing with
different sensors with IDE software.
Page No: 12
 ACTIVITY LOG FOR THE THIRD WEEK

Da Perso
y Brief description of the Learning n
& daily activity InCha
Outcome
Da rge
te Signat
ure

Day – 1

Day - 2

Day – 3

Day – 4

Day – 5

Day –6

Page No: 13
 WEEKLY REPORT
WEEK – 3
(From Dt : to Dt : )

Detailed Report:

Third week session started with Working on NodeMCU – ESP8266, Sensor interfacing, worked
on Wokwi Simulation and Wi-Fi Module connection.

 The NodeMCU ESP8266 is an extensively employed development board in IoT applications,

providing a versatile and cost-effective approach to connect devices to the internet. It features Wi-Fi
and programming capabilities, facilitating speedy prototyping and deployment of IoT solutions.

 Interface NodeMCU boards with Arduino IDE and its Coding.

To interface NodeMCU boards with the Arduino IDE, start by installing the Arduino IDE on your
computer if you haven't already. Open the Arduino IDE and navigate to "File" -> "Preferences." In
the Additional Boards Manager URLs field, add the URL for the ESP8266 board manager, which is
"http://arduino.esp8266.com/stable/package_esp8266com_index.json." Next, go to "Tools" ->
"Board" -> "Boards Manager," search for "ESP8266," and install the ESP8266 board support. Once
installed, select the appropriate NodeMCU board model from the "Tools" -> "Board" menu. Ensure
that you choose the correct COM port and baud rate for your NodeMCU board under "Tools" ->
"Port." You can now write and upload Arduino sketches to your NodeMCU board, leveraging the
power of the Arduino IDE while enjoying the connectivity capabilities of the NodeMCU for IoT
applications.

 Difference between NodeMCU and Arduino UNO

NodeMCU and Arduino Uno are both popular development platforms, but they differ significantly in
terms of their architecture, capabilities, and use cases. Arduino Uno is based on the AVR
microcontroller, while NodeMCU is built around the ESP8266 Wi-Fi module. The Arduino Uno is a
versatile microcontroller board suitable for a wide range of projects, offering a variety of digital and
analog pins. It is commonly used for tasks like sensing and control in standalone projects. On the
other hand, NodeMCU is specifically designed for Internet of Things (IoT) applications, featuring
integrated Wi-Fi connectivity. This makes NodeMCU an excellent choice for projects that require
wireless communication and interaction with the internet. Additionally, NodeMCU supports the Lua
scripting language, enabling easier programming for networking tasks.
The sessions of third week went on the topic NodeMCU. Also on the topic Interfacing with different
sensors with IDE software, and Wi-Fi connects. And also interface with Wokwi Simulation with Wi-
Fi scanning and connecting.

Page No: 14
 ACTIVITY LOG FOR THE FOURTH WEEK

Day Person
& Brief description of the Learning In
Dat daily activity Charg
Outcome
e e
Signature

Day – 1

Day - 2

Day – 3

Day – 4

Day – 5

Day –6

Page No : 15
 WEEKLY REPORT
WEEK –4
(From Dt : to Dt : )

Detailed Report:

Fourth week session started with working on Blynk cloud. And also working with ThingSpeak by read
the data and write data by using API keys.

 Configure led with Blynk cloud

1. Download and install the Blynk app on your smartphone.
2. Create a new account or log in if you already have one.
3. Create a new project in the Blynk app and note down the authentication token provided.
4. Open the Arduino IDE.
5. Go to "Sketch" -> "Include Library" -> "Manage Libraries..."
6. Search for "Blynk" and install the Blynk library
7. In the Arduino sketch, find the section related to the virtual pin you assigned (e.g.,
BLYNK_WRITE(V1)).
8. Modify the code to control the state of a digital pin connected to an LED. For example, use
digitalWrite(LED_PIN, param.asInt()); to set the LED state.
9. Open the Blynk app and press the Button widget you added.
10. The LED should blink or change its state according to the Button widget's status in the app.

 How to create account in ThingSpeak

1. Click "Sign Up".
2. Fill the following mandatory fields: User ID, E-mail, Time Zone, Password and Password
Confirmation.
3. Click "Create Account".
4. Click "Create New Channel".
5. Click the "Channel Settings" tab.
6. Fill Fields 1 to 6 with the following values: Left Wheel, Right Wheel, Vacuum, Bumper, Cliff and
Battery.
7. Click "Update Channel".
8. Click the "API Key" tab to get the API key required by the installer.

 How to read and write and API keys in the ThingSpeak.

 The Read API key allows you to read data from a private channel. You can find the Read API key
for a channel on the API Keys tab of your ThingSpeak channel view. If you are reading data from a
public channel, you do not need a Read API key. Save your channel Read API key in a variable for
convenience.

Page No: 16

ACTIVITY LOG FOR THE FIFTH WEEK

D Pers
ay Brief description of the Learning on
& daily activity InCha
Outcome
D rge
 at Signa
e ture

Day – 1

Day - 2

Day – 3

Day – 4

Day – 5

Day –6

Page No: 17
 WEEKLY REPORT
WEEK –5
(From Dt : to Dt : )

Detailed Report:
Fifth week is all about the Interfacing with sensors with Wokwi and operate in Blynk cloud .
And also work with cloud data interfacing with Arduino code. Then, we working on the internship
mini project

 Interfacing both cloud platform by using coding

Depending on the plan you choose, the data can be stored as-is (Raw data) or will be averaged to a
one-minute average. Averaging means that if you send 60 values per minute, Blynk will only store
one value. You can still see the data flowing in in real-time.
Before you start sending data, we need to prepare some place to store it and visualize it. Let's use
Chart Widget in Blynk.Console for that and plot the noise coming in from Analog Pin A0 on the
hardware.

1. Go to Blynk.Console -> Templates -> Create New Template

2. Go to Web Dashboard Tab -> Add Chart Widget, then open Widget Settings
3. Press Create New Datastream -> Virtual Pin

The above scenario is the sending and storing the data in blynk cloud

 Internship Mini Project

o Controller with servo motor application using Wokwi and Blynk cloud

 Technology used
o Wokwi Simulator
o Blynk cloud

 Coding
o Embedded C++
o GitHUB libraries
Page No : 18
 CHAPTER 5: OUTCOMES DESCRIPTION

Below are common outcomes i achieved after such an internship:

1. Understanding of IoT Concepts
 Comprehensive Knowledge of IoT:
 Gained an understanding of the Internet of Things, including how connected devices
communicate and interact.
 IoT Architecture:
 Learned about IoT architecture components such as sensors, actuators, communication
protocols, gateways, and cloud platforms.
2. Arduino Programming Skills
 Basic to Advanced Arduino Programming:
 Acquired programming skills with Arduino, covering basic electronics, sketches, and
interfacing with sensors and actuators.
 Sensor Integration:
 Gained experience connecting and programming a variety of sensors (temperature, humidity,
light, etc.) with Arduino.
 Data Acquisition and Processing:
 Learned to capture data from sensors, process it, and transmit it for further analysis.
3. PCB Design Knowledge
 Understanding PCB Design Tools:
 Became proficient in using PCB design software like Eagle, KiCAD, or Altium Designer.
 Design and Layout of PCBs:
 Learned to create PCB layouts, including placing components, routing traces, and designing
for manufacturability.
 Prototyping and Testing PCBs:
 Gained experience prototyping PCB designs, assembling components, and testing for
functionality and performance.
4. Communication Protocols and IoT Connectivity
 Knowledge of IoT Communication Protocols:
 Developed an understanding of common IoT communication protocols like MQTT, HTTP,
Zigbee, and Bluetooth.
 Wireless Connectivity:
 Learned to set up wireless connections for IoT devices using Wi-Fi or Bluetooth.
  Cloud Integration:
 Acquired skills in integrating IoT devices with cloud platforms such as AWS IoT, Google
Cloud IoT, or Azure IoT Hub.
5. Real-Time Projects and Applications
 Development of IoT Projects:
 Built and deployed real-time IoT projects, demonstrating practical skills in connecting
devices, data collection, and analysis.
 Prototyping and Testing:
 Gained hands-on experience in building and testing IoT prototypes, troubleshooting issues,
and improving designs.
 Application of IoT in Real-World Scenarios:
 Applied IoT concepts to real-world scenarios, such as smart homes, industrial automation, or
wearable devices.
6. Collaboration and Communication
 Cross-Functional Collaboration:
 Worked with cross-functional teams, including hardware engineers, software developers, and
project managers.
 Effective Communication:
 Developed communication skills by presenting projects, writing documentation, and
explaining technical concepts to team members and stakeholders.
7. Problem-Solving and Troubleshooting
 Troubleshooting IoT Systems:
 Learned to troubleshoot IoT systems, identify issues, and resolve them in a timely manner.
 Root Cause Analysis:
 Developed problem-solving skills by conducting root cause analysis to prevent recurring
issues.
8. Exposure to Industry Best Practices
 Understanding Industry Standards:
 Gained exposure to industry best practices and standards for IoT, Arduino programming, and
PCB design.
 Describe the real time technical skills you have acquired

During an IoT, Arduino, and PCB design internship, I gained a combination of hardware and software skills
crucial for building modern IoT systems. Here is a description of the real-time technical skills i might
acquired:
1. Arduino Programming
 Basics of Arduino:
 Developed a fundamental understanding of Arduino, including setting up the development
environment, writing sketches, and uploading them to Arduino boards.
 Working with Sensors and Actuators:
 Gained experience interfacing with various sensors (e.g., temperature, humidity, light,
motion) and actuators (e.g., LEDs, motors, servos).
 Data Acquisition and Processing:
 Learned to acquire data from sensors, process it, and trigger actions based on predefined
conditions.
2. PCB Design and Fabrication
 PCB Design Software:
 Became proficient in PCB design software like Eagle, KiCAD, or Altium Designer, including
creating schematics and laying out circuit boards.
 Component Placement and Routing:
 Developed skills in optimizing component placement, routing traces, and ensuring signal
integrity.
 Manufacturing and Assembly:
 Learned about the PCB manufacturing process, including generating Gerber files, and gained
experience in assembling and soldering components on PCBs.
3. IoT Connectivity and Communication
 Wireless Communication:
 Gained experience in setting up wireless communication for IoT devices using technologies
like Wi-Fi, Bluetooth, or LoRa.
 Communication Protocols:
 Learned about common IoT communication protocols such as MQTT, HTTP, Zigbee, and
Bluetooth Low Energy (BLE).
 IoT Cloud Integration:
 Acquired skills in connecting IoT devices to cloud platforms, such as AWS IoT, Google
Cloud IoT, or Azure IoT Hub, to transmit data and receive commands.
4. Real-Time IoT Applications
 Building IoT Projects:
 Developed real-time IoT projects, integrating Arduino with sensors, actuators, and
communication modules.
 Prototyping and Testing:
 Learned to build, test, and troubleshoot IoT prototypes, ensuring they meet functional
requirements.
 Data Analytics and Visualization:
 Gained experience in analyzing IoT data and creating simple visualizations to understand
trends and patterns.
5. Hardware Troubleshooting and Debugging
 Debugging Hardware Issues:
 Developed skills in troubleshooting hardware problems, identifying faulty components, and
ensuring proper connections.
 Using Debugging Tools:
 Learned to use debugging tools like multimeters, oscilloscopes, and logic analyzers to
diagnose and resolve hardware issues.
6. Power Management and Optimization
 Power Supply Design:
 Gained experience designing power supply circuits for IoT devices, considering battery life,
power efficiency, and voltage regulation.
 Power Optimization:
 Learned techniques for optimizing power consumption in IoT devices, such as using low-
power components and implementing sleep modes.
7. Collaboration and Documentation
 Collaborating with Teams:
 Worked in cross-functional teams, collaborating with software developers, hardware
engineers, and other stakeholders to build and test IoT solutions.
 Technical Documentation:
 Gained experience in documenting hardware designs, software code, and project workflows,
ensuring that information is clear and accessible to others.
8. Safety and Compliance
 Understanding Safety Standards:
 Learned about safety standards and best practices for IoT devices and PCB design.
 Compliance with Regulations:
 Acquired knowledge of relevant industry regulations and certifications, such as CE marking
or FCC compliance, for IoT hardware.
 Describe the managerial skills you have acquired

1. Project Management
 Planning and Organization:
 Developed the ability to plan projects, organize tasks, and set priorities to meet deadlines.
 Time Management:
 Enhanced your skill in managing time effectively, ensuring tasks are completed efficiently.
 Agile Methodologies:
 Participated in Agile processes like Scrum or Kanban, learning to work in sprints, attend
stand-up meetings, and contribute to sprint reviews.
2. Team Collaboration
 Cross-Functional Collaboration:
 Worked with a team of diverse backgrounds, including hardware engineers, software
developers, and designers, requiring effective communication and teamwork.
 Stakeholder Engagement:
 Learned to communicate effectively with stakeholders, understanding their needs and
expectations, and keeping them updated on project progress.
3. Communication Skills
 Clear Communication:
 Improved your ability to communicate technical concepts to non-technical stakeholders, such
as project managers or clients.
 Technical Documentation:
 Developed skills in writing clear documentation, including project reports, PCB schematics,
and user guides.
 Presentation and Reporting:
 Learned to create and deliver presentations to team members and stakeholders, effectively
conveying project status and outcomes.
4. Leadership and Initiative
 Taking Initiative:
 Demonstrated initiative by identifying and addressing project challenges, suggesting
improvements, and taking charge of specific tasks.
  Leadership Development:
 Developed leadership skills by leading small projects or mentoring junior team members,
providing guidance and support.
5. Problem-Solving and Decision-Making
 Problem-Solving Skills:
 Enhanced your ability to identify problems, brainstorm solutions, and implement corrective
actions.
 Decision-Making:
 Learned to make informed decisions, weighing different options and considering the potential
impact on project outcomes.
6. Quality Assurance and Compliance
 Quality Management:
 Gained experience in implementing quality assurance processes, ensuring that projects meet
specified standards and requirements.
 Compliance with Industry Standards:
 Learned about relevant industry standards and compliance requirements for IoT devices and
PCB design, ensuring projects meet safety and regulatory guidelines.
7. Conflict Resolution
 Resolving Conflicts:
 Acquired skills in resolving conflicts within the team, mediating differences of opinion, and
finding common ground.
 Negotiation:
 Learned to negotiate effectively to resolve disputes and reach agreements that benefit the
project and the team.
 Describe how you could improve your communication skills

. Active Participation in Meetings

 Attend Regular Meetings:
 Participate in stand-up meetings, project planning sessions, and reviews. Actively engage in
discussions and contribute to the conversation.
 Prepare in Advance:
 Before meetings, prepare your talking points, understand the agenda, and gather relevant
information. This preparation will help you communicate more confidently.
2. Seek Feedback and Act on It
 Ask for Constructive Feedback:
 Request feedback from mentors, supervisors, or colleagues about your communication style.
Use this feedback to identify areas for improvement.
 Implement Feedback:
 Apply the feedback you receive to improve your communication, whether it's speaking more
clearly, providing more detail, or listening attentively.
3. Practice Technical Documentation
 Write Clear Documentation:
 Practice writing technical documentation, such as project reports, code comments, and PCB
schematics. Ensure your documentation is clear, concise, and understandable.
 Review and Revise:
 After writing documentation, review it with a colleague or mentor to get feedback. Revise it
based on their suggestions to improve clarity and accuracy.
4. Engage in Cross-Functional Collaboration
 Work with Diverse Teams:
 Collaborate with cross-functional teams, including hardware engineers, software developers,
and designers. This
allows you to practice communicating with people who have different backgrounds and expertise.
 Adapt Communication Styles:
 Learn to adjust your communication style based on your audience. For technical discussions,
use appropriate terminology, and for non-technical stakeholders, explain concepts in simpler
terms.
5. Improve Presentation Skills
 Prepare and Deliver Presentations:
 Offer to present your projects, ideas, or updates during team meetings. This will help you
practice public speaking and improve your ability to communicate to a group.
 Use Visual Aids:
 Enhance your presentations with slides, diagrams, or other visuals to make complex concepts
more accessible. Visual aids can help you stay organized and focused during your
presentations.
6. Practice Active Listening
 Listen Attentively:
 Focus on what others are saying during meetings and discussions. Avoid interrupting, and ask
questions to clarify points when necessary.
 Summarize Key Points:
 At the end of a discussion or meeting, summarize the key points to ensure you understood
correctly. This also helps reinforce information and keeps everyone on the same page.
7. Enhance Written Communication
 Use Communication Tools Effectively:
 Learn to communicate clearly and professionally through email, Slack, or other team
collaboration platforms. Keep your messages concise and to the point.
 Proofread and Edit:
 Before sending written communication, proofread it to check for errors. Edit your messages
to ensure clarity and proper tone.
8. Build Relationships and Networking
 Build Rapport with Colleagues:
 Establish positive relationships with colleagues by engaging in conversations, asking about
their work, and sharing your experiences. This helps create a collaborative work environment.
 Networking Opportunities:
 Attend company events, workshops, or networking sessions to improve your communication
skills in a broader context. This also provides an opportunity to learn from others and build
professional connections.
9. Learn from Communication Experts
 Read Communication Books and Articles:
 Explore resources that focus on improving communication skills. Books, articles, and blogs
on effective communication can offer valuable tips and techniques.
.
Describe the technological developments you have observed and relevant to the subject
area of training (focus on digital technologies relevant to your job role)

1. Internet of Things (IoT)

 Edge Computing:
 Increased adoption of edge computing, where data processing and analytics occur closer to
the source (e.g., IoT devices), reducing latency and improving efficiency.
 IoT Platforms and Ecosystems:
 Growth of IoT platforms like AWS IoT, Google Cloud IoT, and Azure IoT, providing
comprehensive tools for device management, data analytics, and machine learning
integration.

 IoT Security:
 Enhanced focus on IoT security, with improved encryption methods, secure boot processes,
and hardware-based security measures to protect IoT devices and data.
2. Arduino Development
 Arduino-Compatible Boards:
 Proliferation of Arduino-compatible boards with enhanced features, such as increased
processing power, additional memory, and built-in wireless capabilities (e.g., Wi-Fi,
Bluetooth).
 Integration with IoT:
 Greater integration of Arduino boards with IoT platforms, facilitating seamless
communication between devices and cloud-based services
 Student Self Evaluation of the Short-Term Internship

Student Name: Registratio

n No:
Term of From: To :
Internship:
Date of
Evaluation:
Organization Name & Address:

Please rate your performance in the following areas:

Rating Scale: Letter grade of CGPA calculation to be provided

1 Oral communication 1 2 3 4 5
2 Written communication 1 2 3 4 5
3 Proactiveness 1 2 3 4 5
4 Interaction ability with community 1 2 3 4 5
5 Positive Attitude 1 2 3 4 5
6 Self-confidence 1 2 3 4 5
7 Ability to learn 1 2 3 4 5
8 Work Plan and organization 1 2 3 4 5
9 Professionalism 1 2 3 4 5
10 Creativity 1 2 3 4 5
11 Quality of work done 1 2 3 4 5
12 Time Management 1 2 3 4 5
13 Understanding the Community 1 2 3 4 5
14 Achievement of Desired Outcomes 1 2 3 4 5
15 OVERALL PERFORMANCE 1 2 3 4 5

Date: Signature of the Student

 Evaluation by the Supervisor of the Intern Organization

Student Registration
Name: No:
Term of Fro To
Internship: m: :
Date of Evaluation:

Organization Name &

Address:

Name & Address of the

Supervisor with Mobile
Number

Please rate the student’s performance in the following areas: Please note that your
evaluation shall be done independent of the Student’s self evaluation Rating Scale: 1
is lowest and 5 is highest rank

1 Oral communication 1 2 3 4 5
2 Written communication 1 2 3 4 5
3 Proactiveness 1 2 3 4 5
4 Interaction ability with community 1 2 3 4 5
5 Positive Attitude 1 2 3 4 5
6 Self-confidence 1 2 3 4 5
7 Ability to learn 1 2 3 4 5
8 Work Plan and organization 1 2 3 4 5
9 Professionalism 1 2 3 4 5
10 Creativity 1 2 3 4 5
11 Quality of work done 1 2 3 4 5
12 Time Management 1 2 3 4 5
13 Understanding the Community 1 2 3 4 5
14 Achievement of Desired Outcomes 1 2 3 4 5
15 OVERALL PERFORMANCE 1 2 3 4 5

Date: Signature of the Supervisor

 PHOTOS & VIDEO LINKS

EVALUATION
Internal Evaluation for Short Term
Internship
(On-site/Virtual)
Objectives:

• To integrate theory and practice.

• To learn to appreciate work and its function towards the future.

• To develop work habits and attitudes necessary for job success.

• To develop communication, interpersonal and other critical skills in the future job.

• To acquire additional skills required for the world of work.

Assessment Model:

• There shall only be internal evaluation.

• The Faculty Guide assigned is in-charge of the learning activities of the students and for the
comprehensive and continuous assessment of the students.

• The assessment is to be conducted for 100 marks.

• The number of credits assigned is 4. Later the marks shall be converted into grades and
grade points to include finally in the SGPA and CGPA.

• The weightings shall be:

o Activity Log 25 marks o Internship

Evaluation 50marks o Oral
Presentation 25 marks
• Activity Log is the record of the day-to-day activities. The Activity Log is assessed on an
individual basis, thus allowing for individual members within groups to be assessed this
way. The assessment will take into consideration the individual student’s involvement in
the assigned work.

• While evaluating the student’s Activity Log, the following shall be considered –

a. The individual student’s effort and commitment.

b. The originality and quality of the work produced by the individual student.

c. The student’s integration and co-operation with the work assigned.

d. The completeness of the Activity Log.

• The Internship Evaluation shall include the following components and based on Weekly
Reports and Outcomes Description

a. Description of the Work Environment.

b. Real Time Technical Skills acquired.

c. Managerial Skills acquired.

d. Improvement of Communication Skills.

e. Team Dynamics

f. Technological Developments recorded.

 MARKS STATEMENT

(To be used by the Examiners)

 INTERNAL ASSESSMENT STATEMENT

Name Of the Student:

Programme of Study: Year
of Study:
Group:
Register No/H.T. No: Name of the
College:
University:

S..N Evaluation Criterion Maxi Mar

o
mu ks
m Awar
Mar ded
ks

1. Activity Log 25

2. Internship Evaluation 50

3. Oral Presentation 25

GRAND TOTAL 100

Date: Signature of the Faculty Guide

Certified by

Date: Signature of the Head of the Department/Principal

Seal: