A A Q N 0154 F01 Date: 25th February 2022

CERTIFICATE
Cert Brief Drg Total
4 7 4 15 Pgs
FOR COMPLIANCE TO THE CENTRAL MOTOR VEHICLES RULES.
1. In order to establish compliance to the provisions of CMVR, 1989, applicable as on date, documental verification/ necessary testing
was carried out, on the following Base model, submitted by the vehicle manufacturer referred below:
This Certificate Supersedes Vehicle Manufacturer
M/s. Hyundai Motor India Ltd.
Plot No. H-1, SIPCOT Industrial Park Irrungattukottai, Sriperumbudur Taluk
AAQN 0154 dt. 19.04.2021 Kancheepuram Dist, Tamilnadu – 602 105
Plant: Plot No. H-1, SIPCOT Industrial Park Irrungattukottai, Sriperumbudur Taluk
Kancheepuram Dist, Tamilnadu – 602 105
Base Model Vehicle Type & Category Seating Capacity (Incl. Driver) GVW kg
Alcazar 1.5MT Prestige Exe7S 7 Persons 2000
Variants
1 Alcazar 1.5MT Prestige Exe6S 6 Persons 1925
5-Door Passenger Car with
2 Alcazar 1.5 MT Prestige 7S 7 Persons 2000
Catalytic Converter - M1
3 Alcazar 1.5 MT Prestige 6S 6 Persons 1925
4 Alcazar 1.5 MT Platinum 7S 7 Persons 2000
5 Alcazar 1.5 MT Signature 6S 6 Persons 1925
Diesel Engine Power cc Engine Manufacturer
D4FA 84.6 kW @ 4000 rpm 1493 M/s. Hyundai Motor India Ltd., Tamilnadu – 602 105
2. Brief technical specifications (No. PS7i01F(1.5MT)-02) of the base model and its variant, as declared by the vehicle manufacturer, are
enclosed with this certificate. Detailed specifications (No. PS7i01A(1.5MT)-01, PS7i01B(1.5MT)-03, PS7i01C(1.5MT)-03, PS7i01D(1.5MT)-
01, PS7i01E(1.5MT)-03) of the base model and its variant, are also separately issued to the vehicle manufacturer.
3. It is certified that the above of the base model and its variant comply with the provisions of the Central Motor Vehicles Rules, 1989, as
amended up-to-date, including following requirements, (as detailed at ANNEXURE-I, II & III):
. Notification Date Effective From Applicable CMVR
Bharat Stage-VI with OBD I GSR 889(E) 16.09.2016 01.04.2020 115(18)(i)
Free Acceleration Smoke Maximum Smoke Density GSR 881(E) 26.11.2019 26.11.2019 115 (2) (ii)
GSR 954(E) 04.10.2016
Fuel Consumption 01.04.2017 115G (1) & (2)
GSR 1461(E) 27.11.2017
Other Standards Notification Date Notification Date Effective From Applicable CMVR
GSR 111(E) 10.02.2004 GSR 589(E) 16.09.2005
S.O. 1365(E) 13.12.2004 S.O. 436(E) 15.03.2012
GSR 784(E) 12.11.2008 GSR 225(E) 26.03.2015
Overall Dimensions/ Passby GSR 291(E) 24.04.2014 S.O. 1139(E) 28.04.2015
Noise/ Brakes/ Lamps/ Reflex S.O. 411(E) 09.02.2016 GSR 1192(E) 10.12.2018
Reflectors/ Category of Vehicle/ ANNEXURE- I /
GSR 1483(E) 07.12.2017 GSR 1463(E) 27.11.2017
Tyres/ VIN Number/ Safety ANNEXURE- II /
GSR 120(E) 10.02.2017 S.O. 6108(E) 10.12.2018 As per the dates
Glass/ Horn/ Seats/ ANNEXURE- III
S.O. 2412(E) 03.09.2015 GSR 173(E) 01.03.2019 notified
Anchorages and other Safety
Components S.O. 3291(E) 11.10.2017 GSR 457(E) 20.07.2020
GSR 414(E) 26.06.2020 GSR 595(E) 26.08.2021
GSR 148(E) 02.03.2021
GSR 1407(E) 30.03.2021
GSR 240(E) 31.03.2021
Temporary use spare wheel or
GSR 518(E) 01.06.2018 GSR 625(E) 08.08.2012 95 (7)
tyre/ Run Flat Tyre
4. This Certificate is issued as per CMV Rule 126, to establish compliance with the Central Motor Vehicles Rules, 1989, and shall not be construed
as a certificate of compliance to any rules other than those listed in ANNEXURE-I, II & III. Compliance to these rules has been verified based on
the use of specific components / parts / assemblies etc. details of which will be given in the detailed specifications. It is the vehicle
manufacturer’s responsibility to ensure fitment of same components / parts / assemblies etc. before submission of the vehicle for registration.
AUTHORISED SIGNATORY

A. A. BADUSHA Dr. REJI MATHAI

SENIOR DEPUTY DIRECTOR & HEAD DIRECTOR,
HOMOLOGATION MANAGEMENT, REGULATIONS, ARAI, PUNE.
VEHICLE & SAFETY EVALUATION, ARAI, PUNE.
Place of Issue: Pune Page 1 of 4

Digitally Issued CMVR Certificate

 ANNEXURE-I
CMVR CERTIFICATE No. A A Q N 0154 F01 dt. 25th February 2022
Following rules are verified and found to be complying.
Rule Reference Compliance Effective
Sub Rules Description
No GSR/SO Date Verified for From
Definitions
2 l 1192(E) 10.12.18 IS:14272-2011 10.12.2018
(Classification of the Vehicle – M1)
93 (1)(A), (2)(A) Overall dimension of motor vehicles 414(E) 26.06.20 ----- 26.06.2020
94 (1), (2), (3) Condition of tyres ----- ----- ----- -----
IS:15633-2005
(1), (2), (3), (4), (5), (6) Size & Ply Rating of tyres 784(E) 12.11.08 01.04.2009
AIS:051-2004
95 Temporary use spare wheel or tyre/ Run 625(E) 08.08.12
(7) AIS:110-2009 08.08.2012
Flat Tyre 518(E) 01.06.18
(8) Tyre pressure monitoring system 457(E) 20.07.20 AIS 154 01.10.2020
(1), (2), (3), (4)(ii),
Brakes with Automatic Wear Adjustment
(7)(a), (8) IS:15986-2015 01.04.2021
and Fitted with ABS
96 (4B)
173(E) 01.03.19
(10) Electronic Stability Control Systems AIS:133-2016 01.04.2021
(11) Brake Assist System AIS: 152:2018 01.04.2021
96B (a), (b) High Speed Brake Requirements IS:15986-2015 01.04.2021
(1) Fitment ----- ----- ----- -----
98 (2) Steering Gear Steering gear IS:12222-2011 01.04.2019
1463(E) 27.11.17
(3) Steering Effort IS:11948-2010 01.04.2019
99 ----- Forward and backward motion ----- ----- ----- -----
(1), (2), (3) 457(E) 20.07.20 IS:2553(Part 2)
100 Safety glass 01.04.2022
(3C) 1407(E) 30.03.21 (Rev.1)-2019
101 (1), (2) Windscreen wiper 291(E) 24.04.14 IS:15804-2008 01.10.2014
Signalling devices, direction indicators
102 (1), (2) 589(E) 16.09.05 ----- -----
and stop lights
103 (1), (2) Position of the indicator ----- ----- ----- -----
104 (1), (4) Fitment of reflectors 1192(E) 10.12.18 AIS:057(Rev.1)-2010 01.10.2019
(1) (a), (2), (3), (4), (5),
105 Lamps 589(E) 16.09.05 ----- -----
(7)
106 (1) Deflection of lights ----- ----- ----- -----
108 (1) Use of red or white lights ----- ----- ----- -----
109 ----- Parking light ----- ----- ----- -----
111 ----- Prohibition of spotlights etc. ----- ----- ----- -----
(1) Exhaust gases
114 240(E) 31.03.21 ----- 01.04.2021
(2) Location of exhaust pipes
Emission of smoke, vapour, etc. from 889(E) 16.09.16
115 (1), (2)(ii), (18)(i) AIS:137
motor vehicle 881(E) 26.11.19 01.04.2020
Part - 3 & 5
115G (1) Fuel Consumption 1461(E) 27.11.17
117 (1), (2) Speedometer 291(E) 24.04.14 IS:11827-2008 01.04.2015
Performance 214(E) 18.03.99 IS:1884-1993 18.03.1999
119 (1), (2) Horns
Installation 291(E) 24.04.14 IS:15796-2008 01.10.2014
(1) Silencers 01.01.2003
120 111(E) 10.02.04 IS:3028-1998
(2) Pass By Noise (Ref. MoRTH Notification) 01.04.2005
Embossment of the Chassis Number, 589(E) 16.09.05
122 (1), (2) Engine Number & date of manufacture AIS:065-2005 01.04.2009
Ref: Table 11 of Brief Specifications 784(E) 12.11.08

Front Rear Spare Measured Value Limit

Tyre Size Fr: Rr: 215/60R17 96H/ 215/55R18 95H 87 dB(A) to
Horns 97.8 dB(A)
Spare Wheel: 215/60R17 95, H 112 dB(A)
Tyre Make M/s. Nexen china/ M/s. JK India/ M/s. Apollo India Passby Noise 70 dB(A) 74 dB(A)
TA-2020(Bharat Stage VI)/ELTR/2021-2022/28 dt. 15.04.2021
Emission Norms
TA-2020(Bharat Stage VI)/ELTR/2021-2022/659 dt. 21.02.2022
APEX No. 21221463
AUTHORISED SIGNATORY

A. A. BADUSHA Dr. REJI MATHAI

SENIOR DEPUTY DIRECTOR & HEAD DIRECTOR,
HOMOLOGATION MANAGEMENT, REGULATIONS, ARAI, PUNE.
VEHICLE & SAFETY EVALUATION, ARAI, PUNE.
Place of Issue: Pune Page 2 of 4

Digitally Issued CMVR Certificate

 ANNEXURE-II
CMVR CERTIFICATE No. A A Q N 0154 F01 dt. 25th February 2022
CMV Rule 124 Reference Effective
Description Compliance Verified for
(1) Sr. No. GSR/SO Date From
1 Automobile Lamps AIS:034(Part 1)(Rev.1)-2010 6108(E) 10.12.2018 01.10.2019
2 Hydraulic Brake Hose IS:7079-2008 436(E) 15.03.2012 01.10.2013
3 Hydraulic Brake Fluid IS:8654-2001 1365(E) 13.12.2004 13.12.2004
Requirements for behavior of steering
(b) AIS:096-2008 1139(E) 28.04.2015 01.10.2017
mechanism of a vehicle in a Head-on Collision
5
Protection of occupants in the event of an
(c) AIS:098-2008 1139(E) 28.04.2015 01.10.2017
Offset Frontal Collision
Protection of Occupants in the event of Lateral
(b) AIS:099-2008 1139(E) 28.04.2015 01.10.2017
Collision
6
Protection of Pedestrian and other Vulnerable
(c) AIS:100-2010 2412(E) 03.09.2015 01.10.2018
Road Users in the event of a Collision
7 (a) Metallic fuel tanks for vehicles of categories M AIS:095-2007 6108(E) 10.12.2018 01.10.2019
8 Wheel Rims IS:9436-1980 1365(E) 13.12.2004 13.12.2004
11 External Projection AIS:120-2014 411(E) 09.02.2016 01.10.2017
13 Wheel Guards IS:13943-1994 1365(E) 13.12.2004 13.12.2004
14 Wheel Nuts, Disc & Hub Caps IS:13941-1994 1365(E) 13.12.2004 13.12.2004
15 Accelerator Control System IS:14283-1995 1365(E) 13.12.2004 13.12.2004
16 Door Locks and Door Retention Components IS:14225-1995 1365(E) 13.12.2004 13.12.2004
17 Hood Latch IS:14226-1995 1365(E) 13.12.2004 13.12.2004
AIS:071-2009
18 Tell Tale symbols and control 411(E) 09.02.2016 15.03.2013
(Part-1 & Part-2)
AIS:010(Part 1)(Rev.1)-2010
Installation of
Performance Requirements AIS:012(Part 1 to Part 10) 6108(E) 10.12.2018 01.10.2019
20 Lighting/ Signalling
(Rev.1)-2011
Devices
Installation Requirements AIS:008(Rev.1)-2010 436(E) 15.03.2012 01.10.2012
21 EMC AIS:004(Part 3)-2009 411(E) 09.02.2016 01.10.2015
23 Gradeability AIS:003-1999 1365(E) 13.12.2004 13.12.2004
31 Fuel Consumption (On Driving Cycle) Carbon Balance Method 1365(E) 13.12.2004 01.04.2005
34 Driver’s field of vision for vehicles of M1 Category AIS:021-2004 1365(E) 13.12.2004 01.04.2006
38 The interior fittings on automotive vehicles IS:15223-2002 1365(E) 13.12.2004 01.04.2005
41 Requirements for bumpers fitted on M1 IS:15901-2010 411(E) 09.02.2016 01.10.2016
The arrangement and mode of operation of foot
45 AIS:035-2006 1431(E) 20.08.2007 01.04.2008
controls on M1 category of vehicles
(a) Requirements of demisting systems AIS:84(Part 1)-2008
46 2714(E) 04.11.2010 01.04.2011
(b) Requirements of defrosting systems AIS:84(Part 2)-2008
Test procedure for measurement of minimum ground
50 IS:9435-2004 411(E) 09.02.2016 01.10.2016
clearance for M1 category of vehicles
Protective devices against unauthorised use for M
51 AIS:075-2006 411(E) 09.02.2016 01.04.2017
category vehicles
Vehicle Alarm System and Immobilizers for M1 411(E) 09.02.2016
52 AIS:076-2007 01.04.2017
Category 3291 (E) 11.10.2017
Safety standards of components as applicable
Sr. No. Description
1 Safety Glass 01.04.2009
2 Brake Hose 01.04.2009
3 Horn 01.04.2009
4 Tyre 01.04.2009
7 Bulb 01.10.2009
CMV Rule
8 Rear View Mirror AIS:037-2004 784(E) 12.11.2008 01.10.2009
124 (4) 10 Safety belt 01.10.2009
11 Wheel rims 01.10.2009
12 Lighting and Light Signalling Devices 01.10.2009
13 Retro Reflectors 01.10.2009
14 Warning Triangle 01.10.2009
19 Door Locks and Door Retention 01.04.2010
20 Fuel Tanks 01.04.2010
AUTHORISED SIGNATORY

A. A. BADUSHA Dr. REJI MATHAI

SENIOR DEPUTY DIRECTOR & HEAD DIRECTOR,
HOMOLOGATION MANAGEMENT, REGULATIONS, ARAI, PUNE.
VEHICLE & SAFETY EVALUATION, ARAI, PUNE.
Place of Issue: Pune Page 3 of 4

Digitally Issued CMVR Certificate

 ANNEXURE-III
CMVR CERTIFICATE No. A A Q N 0154 F01 dt. 25th February 2022

Rule Sub Reference Compliance Effective

Description
No Rules GSR/SO Date Verified for From
IS:15140-2003 01.04.2009
(1), (1A),
Seat Belt, Seats and their Anchorages 784(E) 12.11.2008 IS:15139-2002 01.04.2009
(5)
IS:15546-2005 01.04.2009
AIS:001-(Part 1)
Specifications
(Rev.01)-2011
(2) Rear View Mirror 1192(E) 10.12.2018 01.10.2019
AIS:002-(Part 1)
125 Installation
(Rev.01)-2011
(8) Child Restraint System Installation 291(E) 24.04.2014 AIS:072-2009 01.04.2015
(9) Additional Safety Features 1483(E) 07.12.2017 AIS:145-2017 01.07.2019
Airbag for the Person Occupying the front seat, 148(E) 02.03.2021
(9)(A) AIS:145-2017 31.12.2021
other than the driver 595(E) 26.08.2021
Temporary use spare wheel or tyre/ Run Flat Tyre 625(E) 08.08.2012
(4)(a) AIS:110-2009 08.08.2012
138 518(E) 01.06.2018
(4)(c) Warning Triangles-Size & Specifications 784(E) 12.11.2008 AIS:022-2001 01.01.2003

Disclaimer:
1. ARAI issues “Type Approval Certificates” (TAC) for vehicles/ components/ parts/ assemblies etc. based on the documents
produced and /or prototype/s submitted by the applicant and testing thereof.

2. ARAI issues TAC in compliance to Motor Vehicle Act / Central Motor Vehicles Rules and their provisions as amended from
time to time or any other statutory orders under which ARAI is authorised. Other Rules/ Acts are outside the purview/ scope
of TAC.

3. Test(s) on prototype(s) is/are carried out on the basis of standard procedures as notified under specific rules. Results of
such tests are the property of bearer of TAC. These results cannot be disclosed unless specifically so ordered by
Government, Court, etc.

4. The bearer of the TAC is under obligation to ensure production strictly as per the provisions of the specific TAC.

5. ARAI is not responsible for testing each vehicles/ components/ parts/ assemblies etc. for which TAC is issued. Further,
ARAI is not responsible for ensuring manufacturing quality of the type approved vehicles/ components/ parts/ assemblies
etc.

6. ARAI is in no way responsible for any misuse or copying of any design/ type/ system in connection with entire vehicle/
components/ parts and assemblies covered under the TAC.

7. Breach of any statutory provision of Indian laws or laws of other countries, will be the sole responsibility of the bearer of
TAC and ARAI shall not be liable for any claims or damages. The bearer shall alone be liable for the same, and shall
undertake to indemnify ARAI in this regard.

8. ARAI has the right, but not under obligation, to initiate cancellation/ withdrawal of the certificate issued, in case of any
fraud, misrepresentation, when it surfaces and comes in the knowledge of ARAI.

The appropriate local courts at Pune shall have the jurisdiction in respect of any dispute, claim or liability arising out of this
certificate/ Report.

AUTHORISED SIGNATORY

A. A. BADUSHA Dr. REJI MATHAI

SENIOR DEPUTY DIRECTOR & HEAD DIRECTOR,
HOMOLOGATION MANAGEMENT, REGULATIONS, ARAI, PUNE.
VEHICLE & SAFETY EVALUATION, ARAI, PUNE.
Place of Issue: Pune Page 4 of 4

Digitally Issued CMVR Certificate

AAQN 0154 F01 dt. 25.02.2022
Table 7 of AIS-007 (Revision 5)

BRIEF TECHNICAL SPECIFICATIONS FOR MOTOR VEHICLES

Hyundai Motor India Limited

H-1, SIPCOT Industrial Park
Manufacturer’s name and address Irrungattukottai, Sriperumbudur Taluk
Kancheepuram Dist., Tamilnadu –
602105
Importer’s name and address (in case of CBU) N/A
Vehicle data
Basic model Alcazar 1.5MT Prestige Exe7S
5-Door Passenger Car with Catalytic
Type / Description
Converter
Category of the vehicle M1
Alcazar 1.5MT Prestige Exe6S
Alcazar 1.5 MT Prestige 7S
Variant(s) Alcazar 1.5 MT Prestige 6S
Alcazar 1.5 MT Platinum 7S
Alcazar 1.5 MT Signature 6S
5-Door Passenger Car with Catalytic
Type / Description
Converter
Category of variant(s) M1
Engine
Make Hyundai Motor India Ltd, India
Model D4FA
Type Compression ignition
Bore x stroke (mm) 75 X 84.5
No. of cylinders 4
Displacement 1493 cc
Compression ratio 16:1 ± 3%
Max. Engine output (kW @ rpm) 84.6 ±2% kW @ 4000±100 rpm
Max. Torque (Nm @ rpm) 250 ± 2% Nm @ 1500~2750 rpm
Air cleaner type Cotton filter-Dry
Type of fuel Diesel
Clutch
Type Friction clutch
Gear box
Make model Hyundai Motor India Ltd, India (M6CF3-1)
Type Manual Transmission
No. of gears 6 Forward + 1 Reverse
Gear Ratio Gear Ratio Overall Ratio
1st 3.636 16.242
2nd 1.962 8.764
3rd 1.294 5.780
4th 0.951 4.248
5th 0.723 3.230
6th 0.633 2.828
Reverse 3.583 16.005
Drive Axle (Front / Rear / All) Front
Manufacturer: Document No : Test Agency : Cert No :
Hyundai Motor India Ltd PS7i01F(1.5MT)-02
Signature Signature
Name Progress through Research
A. A. BADUSHA
SR. DEPUTY DIRECTOR & HEAD,
THE AUTOMOTIVE RESEARCH
Name: Ananthakrishna S L Sheet No: 1 of 3 Designation
HOMOLOGATION MANAGEMENT & ASSOCIATION OF INDIA
REGULATION, ARAI, PUNE
Designation: DGM-R&C Date: 24th Jan 2022 Date of Issue Page No of

Page 1 of 11
AAQN 0154 F01 dt. 25.02.2022
Table 7 of AIS-007 (Revision 5)

BRIEF TECHNICAL SPECIFICATIONS FOR MOTOR VEHICLES

Front axle ratio 4.467

Rear axle ratio N/A
Steering
Power assisted – Electric
Type / Description
Steering gear – Rack & Pinion
Steering wheel diameter mm 370 mm
Ratio 48.1 mm/rev
Frame
Long member size (mm) N/A
Number of cross members N/A
Suspension
Front: Mcpherson strut
Type / Description
Rear: Coupled Torsion Beam Axle (CTBA)
Spring Front & Rear : Coil Spring
Anti-roll bar Torsion Bar
Shock absorbers Gas
Brake
Mando corporation
Service brake (Brief description) Dual circuit-Diagonal split, Hydraulic
Front : Disc, Rear : Disc
Auto Slack Adjuster Fitted ( Yes / No / Optional ) Yes
ABS Fitted (Yes / No / Optional ) Yes
Front (Disc / Drum) Disc
Rear (Disc / Drum) Disc
FR: Disc 54 * 4 = 216 cm2
Total braking area (cm²)
RR: Disc 26.8*4 = 107.2cm2
Parking – Mechanical/Electrical, Acting
Parking brake
on rear wheels
Combined with service brake
Secondary brake Un-failed split circuit of service brake acts
as secondary brake
Wheels and tyres
Aluminum: 6.5JX17, 6.5JX18
Wheel rim size
Steel(Spare): 6.5JX17
215/60 R17 96H – Nexen, JK, Apollo
Tyre size designation including ply rating
215/55 R18 95H – Apollo, JK
Speed index H
Load index / Load rating 96, 95
Tyre Type (Radial / Cross / Tube / Tubeless) Radial, Tubeless
Laden Tyre pressure (front & rear) (kg/cm2) 2.45 (240kpa)
Electrical system
System voltage (V) 12V
Battery rating (Ah) 60Ah
Wiper motor 12±0.3 V
Wiping system (Brief description) IC Regulator built-in
Fuel tank
Material Steel
Capacity (l) 50 ltrs

Manufacturer: Document No : Test Agency : Cert No :

Hyundai Motor India Ltd PS7i01F(1.5MT)-02
Signature Signature
Name Progress through Research
A. A. BADUSHA
SR. DEPUTY DIRECTOR & HEAD,
THE AUTOMOTIVE RESEARCH
Name: Ananthakrishna S L Sheet No: 2 of 3 Designation
HOMOLOGATION MANAGEMENT & ASSOCIATION OF INDIA
REGULATION, ARAI, PUNE
Designation: DGM-R&C Date: 24th Jan 2022 Date of Issue Page No of

Page 2 of 11
AAQN 0154 F01 dt. 25.02.2022
Table 7 of AIS-007 (Revision 5)

BRIEF TECHNICAL SPECIFICATIONS FOR MOTOR VEHICLES

Dimensions
Wheel base (mm) 2760 mm
Overall width (mm) 1790 mm
Overall length (mm) 4500 mm
1670 mm(Without roof-rack)
Overall height (mm)
1675 mm(With roof-rack)
Front track (mm) 17" & 18” Tire : 1554 mm
Rear track (mm) 17" & 18” Tire : 1559 mm
Min. ground clearance (mm) 154mm
Cargo box dimensions (mm) N/A
Load body platform area N/A
Weights
1925kg (6S)
Maximum GVW kg (for rigid vehicles)
2000kg (7S)
Maximum GCW kg (for articulated /combination vehicles) N/A
938 (6S)
Maximum FAW (kg)
957 (7S)
987 (6S)
Maximum RAW (kg)
1043 (7S)
1405kg (Prestige Exe7S)
1405kg (Prestige Exe6S)
Kerb weight with 90% fuel 1405kg (Prestige 7S)
(with spare wheel , tools, etc.) (kg) 1405kg (Prestige 6S)
1432kg (Platinum 7S)
1435kg (Signature 6S)
Maximum gradeability in 1st gear 15˚
CO2 (g/km) (Applicable for category M1 with
129.850
GVW<3.5 T)

Petrol
Fuel Efficiency (l/100 km) (Applicable for Fuel equivalent
equivalent
category M1 with GVW<3.5 T)
4.903 5.476

Vehicle Max speed in unladen condition 175km/hr

Vehicle max speed in laden condition 175km/hr
Seating
Seating capacity 6&7
Sketch showing seating layout with dimensions Drawing No : PS7i-B01

Manufacturer: Document No : Test Agency : Cert No :

Hyundai Motor India Ltd PS7i01F(1.5MT)-02
Signature Signature
Name Progress through Research
A. A. BADUSHA
SR. DEPUTY DIRECTOR & HEAD,
THE AUTOMOTIVE RESEARCH
Name: Ananthakrishna S L Sheet No: 3 of 3 Designation
HOMOLOGATION MANAGEMENT & ASSOCIATION OF INDIA
REGULATION, ARAI, PUNE
Designation: DGM-R&C Date: 24th Jan 2022 Date of Issue Page No of

Page 3 of 11
AAQN 0154 F01 dt. 25.02.2022

DR CK
REVISIONS
DR CK NO DATE
REVISIONS
DATE
NO

HYUNDAI MOTOR COMPANY

TITLE :- DRAWING NUMBER :-
CHECKER

DATE
Seat layout(6-Seater) PS7i-B01(1)

Progress through Research

A. A. BADUSHA
SR. DEPUTY DIRECTOR & HEAD,
THE AUTOMOTIVE RESEARCH
HOMOLOGATION MANAGEMENT & ASSOCIATION OF INDIA
REGULATION, ARAI, PUNE
Page 4 of 11
AAQN 0154 F01 dt. 25.02.2022

DR CK
REVISIONS
DR CK NO DATE
REVISIONS
DATE
NO

HYUNDAI MOTOR COMPANY

TITLE :- DRAWING NUMBER :-
CHECKER

DATE
Seat layout(7-Seater) PS7i-B01(2)

Progress through Research

A. A. BADUSHA
SR. DEPUTY DIRECTOR & HEAD,
THE AUTOMOTIVE RESEARCH
HOMOLOGATION MANAGEMENT & ASSOCIATION OF INDIA
REGULATION, ARAI, PUNE
Page 5 of 11
AAQN 0154 F01 dt. 25.02.2022
Table 11 of AIS-007 (Revision 5)
DETAILS OF LOCATION OF CHASSIS NUMBER AND CODE FOR MONTH &
YEAR OF MANUFACTURE AS PER RULE 122 OF CMVR

Hyundai Motor India Limited

H-1, SIPCOT Industrial Park
Name of the Vehicle Manufacturer & Address :
Irrungattukottai, Sriperumbudur Taluk
Kancheepuram Dist., Tamilnadu – 602105
Name of the basic model : Alcazar 1.5MT Prestige Exe7S
Alcazar 1.5MT Prestige Exe6S
Alcazar 1.5 MT Prestige 7S
Name of Variants, if any : Alcazar 1.5 MT Prestige 6S
Alcazar 1.5 MT Platinum 7S
Alcazar 1.5 MT Signature 6S
Place of Embossing or etching the Chassis Number
(Vehicle Identification Number). Supporting details On the floor structure below driver seat
by drawing or pictures may be provided if necessary.

Code for month and year of production:

Code for year of production:

Year Code Year Code Year Code Year Code Year Code
2022 N 2028 W 2034 4 2040 A 2046 G
2023 P 2029 X 2035 5 2041 B 2047 H
2024 R 2030 Y 2036 6 2042 C 2048 J
2025 S 2031 1 2037 7 2043 D 2049 K
2026 T 2032 2 2038 8 2044 E 2050 L
2027 V 2033 3 2039 9 2045 F 2051 M
Code for month of production:
Month Code Month Code Month Code Month Code
January A April D July G October K
February B May E August H November L
March C June F September J December M

Position of the code for month of production in the

18th from left (also last position)
Chassis number :
Position of the code for year of production in the
10th from left
Chassis number :
Height of the Chassis number
7mm
(Vehicle Identification Number) :

Example of Engine/Motor No. :-

D 4 F A M M X X X X X X

Example of Chassis No. (Vehicle Identification Number) with Month & Year of Manufacture: -

Manufacturer: Document No : Test Agency : Cert No :

Hyundai Motor India Ltd PS7i01-T11(1.5MT)-01
Signature Progress through Research
A. A. BADUSHA
Signature Name SR. DEPUTY DIRECTOR & HEAD, THE AUTOMOTIVE RESEARCH
HOMOLOGATION MANAGEMENT & ASSOCIATION OF INDIA
Name: Ananthakrishna S L Sheet No: 1 of 4 Designation
REGULATION, ARAI, PUNE

Designation: DGM – R&C Date: 24th Jan, 2022 Date of Issue Page No of

Page 6 of 11
AAQN 0154 F01 dt. 25.02.2022
Table 11 of AIS-007 (Revision 5)
DETAILS OF LOCATION OF CHASSIS NUMBER AND CODE FOR MONTH &
YEAR OF MANUFACTURE AS PER RULE 122 OF CMVR
M A L P A 8 1 3 L N M 0 0 0 0 0 1 * B

EXPLANATION of VIN

Example of VIN :

M A L P A 8 1 3 L N M 0 0 0 0 0 1 * B
(1st to 3rd) (4th to 9th) (10th to 17th)
(18th to19th)

VIN Decoding Information:

1st Section (Digits 1 to 3):

M A L
WMI Code given by ISO
MAL :Passengers Cars

2nd Section (Digits 4 to 9):

P A 8 1 3 L
Driver's Side or Check Digit
L: Right hand drive – MT
M: Right hand drive – AT

Engine
3: U2 1.5 (Diesel)
5: Nu PE 2.0 (Petrol)

Restraint system
1 : Both sides Active S/Belt

Body Type
8: Wagon

Model & Series

A: L, B: GL, C:GLS

Vehicle Line
P: Model

3rd Section (Digits 10 to 17):

N M 0 0 0 0 0 1
Serial Number
000001∼999999

Plant
M: Chennai Plant

Model Year
N:2022 / P:2023......

Manufacturer: Document No : Test Agency : Cert No :

Hyundai Motor India Ltd PS7i01-T11(1.5MT)-01
Signature Progress through Research
A. A. BADUSHA
Signature Name SR. DEPUTY DIRECTOR & HEAD, THE AUTOMOTIVE RESEARCH
HOMOLOGATION MANAGEMENT & ASSOCIATION OF INDIA
Name: Ananthakrishna S L Sheet No: 2 of 4 Designation
REGULATION, ARAI, PUNE

Designation: DGM – R&C Date: 24th Jan, 2022 Date of Issue Page No of

Page 7 of 11
AAQN 0154 F01 dt. 25.02.2022
Table 11 of AIS-007 (Revision 5)
DETAILS OF LOCATION OF CHASSIS NUMBER AND CODE FOR MONTH &
YEAR OF MANUFACTURE AS PER RULE 122 OF CMVR

4th Section (Digits 18 to 19):

* B
Month Code
A:Jan / B:Feb / C:Mar / D:Apr / E:May /
F:Jun / G:Jul / H:Aug / J:Sep / K:Oct /
L:Nov / M:Dec

Manufacturer: Document No : Test Agency : Cert No :

Hyundai Motor India Ltd PS7i01-T11(1.5MT)-01
Signature Progress through Research
A. A. BADUSHA
Signature Name SR. DEPUTY DIRECTOR & HEAD, THE AUTOMOTIVE RESEARCH
HOMOLOGATION MANAGEMENT & ASSOCIATION OF INDIA
Name: Ananthakrishna S L Sheet No: 3 of 4 Designation
REGULATION, ARAI, PUNE

Designation: DGM – R&C Date: 24th Jan, 2022 Date of Issue Page No of

Page 8 of 11
AAQN 0154 F01 dt. 25.02.2022
Table 11 of AIS-007 (Revision 5)
DETAILS OF LOCATION OF CHASSIS NUMBER AND CODE FOR MONTH &
YEAR OF MANUFACTURE AS PER RULE 122 OF CMVR

EXPLANATION of ENGINE NUMBER

Example of Engine Number :

D 4 F A M M X X X X X X
st th th th
(1 to 4 ) (4 to 12 )

Engine Number Decoding Information:

1st Section (Digits 1 to 4):

D 4 F A
Engine Capacity
A: U-1.5 (1493 cc)
L: Nu PE 2.0 (1999 cc)

Engine Type
F: U2 1.5 Engine
N: Nu PE 2.0 Engine

Number of cylinder
4: 4 Cylinders
3: 3 Cylinders

Fuel Used
G : Gasoline
D : Diesel

2nd Section (Digits 5 to 12):

M M X X X X X X
Serial Number
Alphanumeric

Plant
M: Hyundai Motor India Ltd, India

Model Year
M:2021 / N:2022 / P:2023......

Manufacturer: Document No : Test Agency : Cert No :

Hyundai Motor India Ltd PS7i01-T11(1.5MT)-01
Signature Progress through Research
A. A. BADUSHA
Signature Name SR. DEPUTY DIRECTOR & HEAD, THE AUTOMOTIVE RESEARCH
HOMOLOGATION MANAGEMENT & ASSOCIATION OF INDIA
Name: Ananthakrishna S L Sheet No: 4 of 4 Designation
REGULATION, ARAI, PUNE

Designation: DGM – R&C Date: 24th Jan, 2022 Date of Issue Page No of

Page 9 of 11
AAQN 0154 F01 dt. 25.02.2022

DR CK
REVISIONS
DR CK NO DATE
REVISIONS
NO DATE

HYUNDAI MOTOR COMPANY

TITLE :- DRAWING NUMBER :-
CHECKER

DATE
VIN Location PS7i-F01

Progress through Research

A. A. BADUSHA
SR. DEPUTY DIRECTOR & HEAD,
THE AUTOMOTIVE RESEARCH
HOMOLOGATION MANAGEMENT & ASSOCIATION OF INDIA
REGULATION, ARAI, PUNE
Page 10 of 11
AAQN 0154 F01 dt. 25.02.2022

DR CK
REVISIONS
NO DATE
DR CK
ENGINE
NUMBER
POSITION

REVISIONS
NO DATE

HYUNDAI M OTORS I NDI A LI M I TED

TITLE :- DRAWING NUMBER :-
CHECKER
Engine number location PS7i01(1.5MT)-F02
DATE

Progress through Research

A. A. BADUSHA
SR. DEPUTY DIRECTOR & HEAD,
THE AUTOMOTIVE RESEARCH
HOMOLOGATION MANAGEMENT & ASSOCIATION OF INDIA
REGULATION, ARAI, PUNE

Page 11 of 11